Table of Contents
Overview ..................................................................................................................3
Technician Notes......................................................................................................3
Disassembly Instructions..........................................................................................3
Reassembly Instructions..........................................................................................3
Required Tools.........................................................................................................3
Battery......................................................................................................................4
Hard disk..................................................................................................................4
Optical Drive.............................................................................................................6
Memory Modules......................................................................................................7
Wireless LAN card....................................................................................................8
Intel Turbo Memory Module (optional)....................................................................11
CPU........................................................................................................................11
Keyboard................................................................................................................13
LCD Assembly........................................................................................................13
LCD Panel..............................................................................................................15
Webcam.................................................................................................................16
Inverterboard..........................................................................................................17
Wireless Antenna...................................................................................................17
Top Cover...............................................................................................................18
Mainboard ..............................................................................................................19
Bluetooth Module....................................................................................................20
USB and Audio board.............................................................................................20
DC Jack..................................................................................................................21
Modem Connector..................................................................................................22
Speakers and Subwoofer.......................................................................................22
Button and LED Board and Touchpad....................................................................22
Reassembly Notes.................................................................................................23
Notice.....................................................................................................................23
EasyNote MB Disassembly Manual
2
Overview
This document contains step-by-step disassembly instructions for the EasyNote MB
series. The instructions are illustrated where necessary with images of the part of the
device that is being rem oved or disassembled.
Packard Bell reserves the right to make changes to the EasyNote MB series without
notice.
Technician Notes
Only technicians authorized by Packard Bell B.V. should attempt to repair this
equipment. All troubleshooting and repair procedures are detailed to allow only
subassembly/module level repair. Because of the complexity of the individual boards
and subassemblies, no one should attempt to make repairs at the component level or to
make modifications to any printed wiring board. Improper repairs can create a safety
hazard. Any ind ication of component rep lacement or printed wiring board modifications
may void any warranty or exchange allowances.
Disassembly Instructions
When disassembling the unit, follow these general rules:
n Turn off the power and disconnect all cables.
n Label all removed connectors. Note where the connector goes and in what
position it was installed.
n Do not disassemble the unit into parts that are smaller than those specified in
the instructions.
Reassembly Instructions
Reassembly is the reverse of the disassembly process. Use care to ensure that all
cables and screws are returned to their proper positions. Check that no tools or any
loose parts have been left inside the product. Check that everything is properly installed
and tightened.
Required Tools
All disassembly procedures can be performed using the following tools:
n Phillips (#1 bit) screwdriver
n Hex bolt (5 bit) screw driver
n Small flat blade screwdriver
EasyNote MB Disassembly Manual
3
Battery
1. Push aside the 2 clips securing the battery.
Fig. 1 Removing the battery.
2. Pull out the battery
Hard disk
1. Remove the battery
2. Remove the screw securing the hard disk cover.
Fig. 2 The bottom of the notebook.
Note: the screw does NOT stay attached to the cover.
EasyNote MB Disassembly Manual
4
3. Take away the HDD cover
4. Pull the hard disk to the left and lift it out.
Fig. 3 The HDD compartment..
5. Remove the 2 screws of the HDD bracket and take away the bracket.
Fig. 4 The HDD and its bracket.
Note: The EasyNote MB series use S-ATA hard disks. S-AT A hard disks have no
master/slav e settings (so no jumpers needed).
EasyNote MB Disassembly Manual
5
Optical Drive
1. Remove the battery
2. Remove the 2 screws securing the optical drive.
Fig. 5 The optical drive screws.
3. Use the emergency-eject to open the dr ive tray. Pull the drive out.
Close the tray again.
Fig. 6 Removing the optical drive.
EasyNote MB Disassembly Manual
6
4. Remove the 2 brackets from the optical drive ( 1x 2 and 1x 1 screws).
Fig. 7 The optical drive brackets.
5. Remove the bezel: push the 2 clips to push the bezel loose
Fig. 8 Removing the optical drive bezel.
Memory Modules
1. Remove the battery.
2. Remove the 4 screws for the large cover on the bottom of the unit.
Fig. 9 The bottom base screws.
EasyNote MB Disassembly Manual
7