Ozito ETL-7530U Original Instructions Manual

ELECTRIC
TILLER

750W 300mm

ORIGINAL INSTRUCTIONS

SPECIFICATIONS

Voltage: 230V~50Hz
Power Rating: 750W
No Load Speed: 400/min
Working Width: 300mm
Working Depth: 220mm max.
Tines: 4 x 220mm
Noise Level: 93dB(A)
Weight: 8.14kg

ETL-7530U

WHAT’S IN THE BOX

WARRANTY

1117

Tiller Motor & Switch

Upper & Lower Handle

Handle Fasteners

OZITO UK Unit 9 Stadium Court, Wirral International Business Park, Plantation Road, Bromborough, Wirral, CH62 3QG

All of our products undergo strict quality checks to ensure that they reach
you in perfect condition. In the unlikely event that your device develops a
fault, please contact our service department at the address shown on this
guarantee card. You can also contact us by telephone using the customer
service number shown. Please note the following terms under which
guarantee claims can be made:

1. These warranty terms regulate additional warranty services, which the
manufacturer mentioned below promises to buyers of its new products
in addition to their statutory guarantee claims are not affected by this
guarantee. Our guarantee is free of charge to you.

2. The warranty services only covers defects due to material or
manufacturing faults on a product which you have bought from the

manufacturer mentioned below are limited to either the rectication of said

defects on the product or the replacement of the product, whichever we
prefer.
Please note that our devices are not designed for use in commercial, trade
or professional applications. A guarantee contract will not be created if the
device has been used by commercial, trade or industrial business or has
been exposed to similar stresses during the guarantee period.

3. The following are not covered by our guarantee:

- Damage to the device caused by a failure to follow the assembly
instructions or due to incorrect installation, a failure to follow the operating
instructions (for example connecting it to an incorrect mains voltage or
current type) or a failure to follow the maintenance and safety instructions
or by exposing the device to abnormal environmental conditions or by lack
of care and maintenance.

- Damage to the device caused by abuse or incorrect use (for example
overloading the device or the use or unapproved tools or accessories),
ingress of foreign bodies into the device (such as sand, stones or dust,
transport damage), the use of force or damage caused by external forces
(for example by dropping it).

- Damage to the device or parts of the device caused by normal or natural
wear or tear or by normal use of the device.

4. Your Product is guaranteed for a period of 36 months from the original
date of purchase and is intended for DIY (Do It Yourself) use only. Warranty
excludes consumable parts. Guarantee claims should be submitted
before the end of the guarantee period within two weeks of the defect
being noticed. No guarantee claims will be accepted after the end of the
guarantee period. The original guarantee period remains applicable to the
device even if repairs are carried out or parts are replaced. In such cases,

the work performed or parts tted will not result in an extension of the

guarantee period, and no new guarantee will become active for the work
performed or parts tted. This also applies if an on-site service is used.

IN ORDER TO MAKE A CLAIM UNDER THIS WARRANTY YOU MUST
RETURN THE PRODUCT TO THE PLACE OF PURCHASE WITH YOUR
REGISTER RECEIPT.

Please refer to the restrictions of this warranty concerning wearing parts,
consumables and missing parts as set out in the service information in
these operating instructions.

CUSTOMER SERVICE HELPLINE
GB: 0151 294 4488
IRL: 1850 882711
Ozito-diy.co.uk

ozito-diy.co.uk

Important! Read the directions for use before operating

the tool.

Keep other persons (and animals) away from the
danger zone.

Caution! Sharp teeth. The teeth continue to rotate after
the equipment is switched off. Pull the plug out of the
socket outlet before carrying out any maintenance or if the
cable becomes damaged.

Keep the power cable away from the roller.

Guaranteed sound power level: 99 dB

Danger! Read the operating instructions to reduce the risk of injury

Wear hearing and eye protection.

Cord Restraint & Cord
Clips x 2

ONLINE MANUAL

Scan this QR Code with your
mobile device to take you to
the online manual.

KNOW YOUR PRODUCT

1. BEFORE USE

ELECTRIC TILLER

1

2

3

4

5

6

7

8

9 10 11

1. Start/Stop Lever

2. Lock-off Button

3. Upper Handle

4. Lower Handle

5. Motor Housing

6. Lower Handle Bracket

7. Fender

8. Tines

9. Upper Handle Bolt x 2

10. Securing Knob x 2

11. Lower Handle Bolt & Nut x 2

Items Supplied

Please check that the article is complete as specified in the scope
of delivery. If parts are missing, please contact our service centre or
the sales outlet where you made your purchase at the latest within 5
working days after purchasing the product and upon presentation of
a valid bill of purchase. Also, refer to the warranty table in the service
information at the end of the operating instructions.

¥ Open the packaging and take out the equipment with care.

¥ Remove the packaging material and any packaging and/or

transportation braces (if available).

¥ Check to see if all items are supplied.

¥ Inspect the equipment and accessories for transport damage.

¥ If possible, please keep the packaging until the end of the guarantee

period.

Danger!

The equipment and packaging material are not toys. Do not let
children play with plastic bags, foils or small parts. There is a
danger of swallowing or suffocating!

Proper Use

The machine is designed for digging soil (for example garden beds). Be
sure to observe the restrictions in the safety instructions.

The operating instructions as supplied by the manufacturer must be
kept and referred to in order to ensure that the machine is properly
used and maintained. The instructions contain valuable information on
operating, maintenance and servicing conditions.

For safety reasons, the machine may not be used as a drive unit for
other work tools or tool sets of any kind.

The equipment is to be used only for its prescribed purpose. Any other
use is deemed to be a case of misuse. The user / operator and not
the manufacturer will be liable for any damage or injuries of any kind
caused as a result of this.

Please note that our equipment has not been designed for use in
commercial, trade or industrial applications. Our warranty will be voided
if the machine is used in commercial, trade or industrial businesses or
for equivalent purposes.

SETUP & PREPARATION

2. ASSEMBLY

1. Slide the upper handle
over the upper ends of the
lower handle. Fit the bolts
through the upper handle
and then through the hole
in the lower handle.

2. Secure in place by
screwing the supplied
securing knobs over the
protruding ends of the
bolts.

1. First, slide the extension
cord restraint onto the
lower handle.

2. Insert the lower handle
to lower handle brackets

and x in place with the

supplied bolts and nuts.

Fitting the Lower Handle

Fitting the Upper Handle

WARNING!: ENSURE ENSURE THE TOOL IS

DISCONNECTED FROM THE POWER SUPPLY BEFORE
ASSEMBLY

1. Remove the two screws
and the side cover from the
safety switch.

Fitting the Safety Switch

2. Fit the safety switch to the
upper handle as shown.

3. Ret the side cover and

secure with the screws
removed in step 1.

Securing the Power Cord

1. Secure the power cord from
the switch housing to the
handle using the two cord
clips as shown.

NOTE: Ensure the cord follows

the handle smoothly from the
switch to the body of the tiller.