Ozito DSR-2500 User Manual

DETAIL
SANDER

180W

INSTRUCTION MANUAL

SPECIFICATIONS

Motor: 180W
No Load Speed: 15,000/min
Pad Size: 140x140x80mm
Paper Fitment: Hook & Loop
Power Cord: 2m
Weight: 1.5kg

WHAT’S IN THE BOX

Detail Sander

Dust Canister

ozito.com.au

WARRANTY

IN ORDER TO MAKE A CLAIM UNDER THIS
WARRANTY YOU MUST RETURN THE PRODUCT
TO YOUR NEAREST BUNNINGS WAREHOUSE WITH
YOUR BUNNINGS REGISTER RECEIPT. PRIOR TO
RETURNING YOUR PRODUCT FOR WARRANTY
PLEASE TELEPHONE OUR CUSTOMER SERVICE

HELPLINE:

Australia 1800 069 486
New Zealand 0508 069 486

TO ENSURE A SPEEDY RESPONSE PLEASE
HAVE THE MODEL NUMBER AND DATE OF
PURCHASE AVAILABLE. A CUSTOMER SERVICE
REPRESENTATIVE WILL TAKE YOUR CALL
AND ANSWER ANY QUESTIONS YOU MAY
HAVE RELATING TO THE WARRANTY POLICY

OR PROCEDURE.

20 x Sanding Paper

DSR-2500

The benefits provided under this warranty are in addition
to other rights and remedies which are available to you at law.

Our goods come with guarantees that cannot be excluded
at law. You are entitled to a replacement or refund for a major
failure and for compensation for any other reasonably foreseeable
loss or damage. You are also entitled to have the goods repaired
or replaced if the goods fail to be of acceptable quality and the
failure does not amount to a major failure.

Generally you will be responsible for all costs associated with
a claim under this warranty, however, where you have suffered
any additional direct loss as a result of a defective product you
may be able to claim such expenses by contacting our customer
service helpline above.

3 YEAR REPLACEMENT WARRANTY

Your product is guaranteed for a period of 36 months from
the original date of purchase. If a product is defective it will
be replaced in accordance with the terms of this warranty.

Warranty excludes consumable parts, for example: carbon
brushes, dust bags, backing pads and sanding sheets.

WARNING

The following actions will result in the warranty being void.

• If the tool has been operated on a supply voltage other
than that specified on the tool.

• If the tool shows signs of damage or defects caused
by or resulting from abuse, accidents or alterations.

• Failure to perform maintenance as set out within the
instruction manual.

• If the tool is disassembled or tampered with in any way.

OZITO

Australia/New Zealand (Head Office) 1-23 Letcon Drive, Bangholme, Victoria, Australia 3175.

0417

KNOW YOUR PRODUCT

SETUP & PREPARATION

DETAIL SANDER

1 On/Off Switch

2 Hook & Loop Sanding Pad

3 Soft Grip

4 Dust Canister Adapter

1. HOOK AND LOOP SANDING SHEET

WARNING: ENSURE THE TOOL IS DISCONNECTED

FROM THE POWER SUPPLY BEFORE PERFORMING
ANY OF THE FOLLOWING OPERATIONS..

1 When tting sanding paper, align the holes on the sanding sheet

with the holes on the sanding pad.

ACCESSORIES

5 Dust Canister 6 Sanding Paper x 20

(6x60g, 8 x 80g, 6 x 120g)

2 Replace the sanding sheet when it is worn.

3 Replace hook &

loop backing pad
when worn (see
maintenance section).

ONLINE MANUAL

Scan this QR Code with your
mobile device to take you to
the online manual.