Ozito CSL-018 Instruction Manual
Battery power: 18V
Charge time: 3 – 5 hours
No load speed: 2000/min
Stroke length: 13mm
Blade fitment: Universal (U-shaped) only
Maximum cutting capacity: Wood 20mm
Aluminium sheet 2mm
Non alloy steel 1mm
Battery: 18V - 1.3Ah Lithium Ion
Weight with 1 battery: 1.1kg
Blade fitment: Standard
Includes: 1 x Metal Cutting U Type Jigsaw Blade
1 x Wood Cutting U Type Jigsaw Blade
WARNING! The noise level of this machine can exceed 85dB(A).
Operators are recommended to use hearing protection devices.
4
2
10
9
11
SPECIFICATIONS – MODEL NO. CSL-018
1
KNOW YOUR PRODUCT
1. Tool-less blade clamp
2. Front shoe
3. On/Off trigger switch
4. Lock off button
5. Battery release button
6. Battery
7. Metal Cutting Blade
8. Wood Cutting Blade
9. Charging cradle
10. Charging adaptor
11. Charging jack
12. Tool-less blade clamp lever
13. Hand grip (with rubber over mould)
14. Rear hand grip (with rubber over mould)
!
!
5
7
8
3
1
13
14
6
1
12
2
TABLE OF CONTENTS
SPECIFICATIONS ………………………………………..
INTRODUCTION…………………………………………
ELECTRICAL SAFETY…………….………………………
GENERAL POWER TOOL SAFETY WARNINGS………
CUT SAW SAFETY WARNINGS!……………………….
LITHIUM ION BATTERY AND CHARGER
SAFETY FEATURES…………….…………………………
CHARGING YOUR LITHIUM ION BATTERY.………….
ASSEMBLY.……………………………………………….
CUT SAW OPERATION………………………………….
MAINTENANCE…………….……………………………
SPARE PARTS …………….……………………………...
DESCRIPTION OF SYMBOLS ………………………….
PACK CONTENTS ………………………………………
WARRANTY………………………………………………
Page 1
Page 3
Page 3
Page 4
Page 7
Page 8
Page 9
Page 11
Page 12
Page 15
Page 15
Page 16
Page 17
Page 18
INTRODUCTION
3
Congratulations on purchasing an Ozito Lithium Ion Cordless Cut
Saw. We aim to provide quality tools at an affordable price.
We hope you will enjoy using this tool for many years. Your
Lithium Ion Cordless Cut saw CSL-018 is an extremely versatile
tool designed to cut many different types of light material in many
varying situations.
It is designed to be used in a DIY (Do It Yourself) context or for
hobbyist purposes. It is ideal for light cutting applications ONLY.
The Cut Saw is supplied with a U Type Jigsaw wood cutting blade
and a U Type Jigsaw metal cutting blade. Blade changes are “toolfree”. No tool is required to fit or remove a blade.
This unit does not accept Bayonet/Universal Jigsaw blades or
Standard Reciprocating Blades.
ELECTRICAL SAFETY
!
!
WARNING! When using mains-powered tools, basic safety precautions,
including the following, should always be followed to reduce risk of fire,
electric shock, personal injury and material damage.
Read the whole manual carefully and make sure you know how to switch the tool
off, in an emergency, before operating the tool.
Save these instructions and other documents supplied with this machine for future
reference.
This tool is double insulated in accordance with AS/NZS 60335-1;
therefore no earth wire is required.
If the supply cord is damaged, it must be replaced by an electrician or a power tool
repairer in order to avoid a hazard.
Note: Double insulation does not take the place of normal safety precautions when
operating this tool. The insulation system is for added protection against injury
resulting from a possible electrical insulation failure within the tool.
Using an Extension Lead
Always use an approved extension lead suitable for the power input of this tool.
Before use, inspect the extension lead for signs of damage, wear and ageing.
Replace the extension lead if damaged or defective.
When using an extension lead on a reel, always unwind the lead completely. Use of
an extension lead not suitable for the power input of the tool or which is damaged
or defective may result in a risk of fir
e and electric shock.
It is recommended that the extension lead is a maximum of 25m in length. Do Not
use multiple extension leads
4
GENERAL POWER TOOL SAFETY WARNINGS
WARNING! Read all safety warnings and all instructions. Failure to
follow the warnings and instructions may result in electric shock, fire and/or
serious injury.
Save all warnings and instructions for future reference.
The term “power tool" in all of the warnings refers to your mains-operated
(corded) power tool or battery-operated (cordless) power tool.
1) Work area safety
a) Keep work area clean and well lit.
Cluttered or dark areas invite accidents.
b) Do not operate power tools in explosive atmospheres, such as in the
presence of flammable liquids, gases or dust. Power tools create sparks which
may ignite the dust or fumes.
c) Keep children and bystanders away while operating a power tool. Distractions
can cause you to lose control.
2) Electrical safety
a) Power tool plugs must match the outlet. Never modify the plug in any way.
Do not use any adapter plugs with earthed (grounded) power tools.
Unmodified plugs and matching outlets will reduce risk of electric shock.
b) Avoid body contact with earthed or grounded surfaces, such as pipes,
radiators, ranges and refrigerators.
There is an increased risk of electric shock if
your body is earthed or grounded.
c) Do not expose power tools to rain or wet conditions. Water entering a power
tool will increase the risk of electric shock.
d) Do not abuse the cord. Never use the cord for carrying, pulling or unplugging
the power tool. Keep cord away from heat, oil, sharp edges or moving parts.
Damaged or entangled cords increase the risk of electric shock.
e) When operating a power tool outdoors, use an extension cord suitable for
outdoor use. Use of a cord suitable for outdoor use reduces the risk of
electric shock.
f) If operating a power tool in a damp location is unavoidable, use a residual
current device (RCD) protected supply.
Use of an RCD reduces the risk of
electric shock.
3) Personal safety
a) Stay alert, watch what you are doing and use common sense when operating
a power tool. Do not use a power tool while you are tired or under the
influence of drugs, alcohol or medication.
A moment of inattention while
operating power tools may result in serious personal injury.
b) Use personal protective equipment. Always wear eye protection. Protective
equipment such as dust mask, non-skid safety shoes, hard hat, or hearing
protection used for appropriate conditions will reduce personal injuries.
c) Prevent unintentional star
ting. Ensur
e the switch is in the off-position before
connecting to power sour
ce and/or batter
y pack, picking up or car
rying the
tool.
Carrying power tools with your finger on the switch or energising power
tools that have the switch on invites accidents.
!
!
!
!
5
GENERAL POWER TOOL SAFETY WARNINGS
!
!
d) Remove any adjusting key or wrench before turning the power tool on. A
wrench or a key left attached to a rotating part of the power tool may result in
personal injury.
e) Do not overreach. Keep proper footing and balance at all times. This
enables better control of the power tool in unexpected situations.
f) Dress properly. Do not wear loose clothing or jewellery. Keep your hair,
clothing and gloves away from moving parts. Loose clothes, jewellery or
long hair can be caught in moving parts.
g) If devices are provided for the connection of dust extraction and
collection facilities, ensure these are connected and properly used. Use of
dust collection can reduce dust-related hazards.
4) Power tool use and care
a) Do not force the power tool. Use the correct power tool for your
application.
The correct power tool will do the job better and safer at the rate
for which it was designed.
b) Do not use the power tool if the switch does not turn it on and off. Any
power tool that cannot be controlled with the switch is dangerous and must
be repaired.
c) Disconnect the plug from the power source and/or the battery pack from
the power tool before making any adjustments, changing accessories, or
storing power tools.
Such preventive safety measures reduce the risk of
starting the power tool accidentally.
d) Store idle power tools out of the reach of children and do not allow
persons unfamiliar with the power tool or these instructions to operate
the power tool.
Power tools are dangerous in the hands of untrained users.
e) Maintain power tools. Check for misalignment or binding of moving parts,
breakage of parts and any other condition that may affect the power
tool's operation. If damaged, have the power tool repaired before use.
Many accidents are caused by poorly maintained power tools.
f) Keep cutting tools sharp and clean. Properly maintained cutting tools with
sharp cutting edges are less likely to bind and are easier to control.
g) Use the power tool, accessories and tool bits etc. in accordance with
these instructions, taking into account the working conditions and the
work to be performed. Use of the power tool for operations different from
those intended could result in a hazardous situation.
5) Service
a) Have your power tool serviced by a qualified repair person using only
identical replacement parts.
This will ensure that the safety of the power tool
is maintained.
b) If the supply cord is damaged, it must be replaced by the manufacturer, its
service agent or similarly qualified persons in or
der to avoid a hazard.
Loading...