Outform iDisplay enterprise User Manual

iDISPLAY Enterprise
User Manual
1
Table of Contents
About This Guide 2
Important Notices 3
Package Contents 5
Counter Stand Assembly Instructions 9
Backside Tablet Buttons 13
Using the NFC Cards 14
Playing Content and Using the Software 15
Pulse Player Settings 17
Using the Android Operating System 21
Troubleshooting 24
All Rights Reserved
C
2
About This Guide
Thank you for purchasing iDISPLAY Enterprise products. We recommend reading this user guide in its entirety in order to maximize the performance and service life of these products. These products are intended for commercial use and should be installed by authorized personnel only.
Introducing iDISPLAY Enterprise
iDISPLAY Enterprise is the newest addition to OUTFORM’s exclusive brand of iDISPLAY products. Including a new counter stand and tablet handle, iDISPLAY Enterprise delivers hands-free use as well as portability to sales associates in order to incite customer engagement at the point of sale. The tablet screen size is 10.1 inches, and includes an adaptive handle that makes carrying the tablet easy and secure. The tablet viewing angle adjusts to three dierent positions to accommodate glare from in-store lighting as well as user access. The counter stand utilizes a smart NFC card locking mechanism, ensuring the unit remains secure in commercial environments. As is standard on all iDISPLAY tablets, iDISPLAY Enterprise oers Pulse Technology, an exclusive OUTFORM technology that integrates hardware and software to create a comprehensive “out-of­the-box” visual merchandising solution.
All Rights Reserved
C
3
Important Notices
Copyright Information
Copyright © 2015 OUTFORM. All rights reserved.
All intellectual property rights in this publication are owned by OUTFORM and protected by applicable copyright laws and international treaty provisions. OUTFORM retains all rights not expressly granted. No part of this publication may be reproduced in any form whatsoever or used to make any derivative work without prior written approval by OUTFORM.
OUTFORM reserves the right to revise this publication, and/or make improvements or changes in the product(s) and/or the program(s) described in this documentation at any time without prior notice. The information in this document is provided in good faith, but without any representation or warranty whatsoever, whether it is accurate, or complete or otherwise, and on express understanding that OUTFORM shall have no liability whatsoever to other parties in any way arising from or relating to the information or its use.
All other trademarks are the property of their respective owners. Other company and brand products and service names are trademarks or registered trademarks of their respective holders.
This device complies with CE and FCC regulations. Operation is subject to the following two conditions:
1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.
All Rights Reserved
C
4
Safety and Warning Information
NOTE
This mark is applied to indicate that the equipment conforms to European safety and electro-magnetic compatibility standards.
WARNING!
Main Supply: This equipment is designed to operate from a 100-240 Volt, 50/60Hz AC mains supply. The use of other power sources may damage this equipment. Check that the voltage marked on the rating plate located at the rear of the power adaptor states 100-240V. The manufacturer will NOT accept responsibility or damage or injury caused by connecting to the wrong voltage.
WARNING!
Main Adaptor: The supplied power adaptor is compatible with a standard main socket. If the power adaptor or lead gets damaged, it must be replaced by a qualified se vice agent with an approved adaptor of the same type and rating.
WARNING!
Dangerous voltage constituting a risk of electric shock is present inside this equipment.
WARNINGS!
The main plug shall be the main disconnect device and shall remain operable at all times.
Do not push objects into holes and ventilation slots.
Do not expose this product to dripping or splashing or place any objects fil ed with liquids on or near the product.
Do not place a naked flame sou ce, such as lighted candles, on or near this product.
Do not attempt to repair this product yourself. Always use a qualified se vice agent to perform adjustments or repairs.
All Rights Reserved
C
5
Package Contents
Enterprise is shipped as two separate packages, including the tablet in one box and the counter stand in another box. The items listed on this page are included in the counter stand packaging:
NFC Manager Card (Red Lock Icon) (x1)
NFC User Card
(Gray Lock Icon) (x3)
Counter Stand Rotating
Base Screw
Power Cable and Plug Adapters
Usage:
All Rights Reserved
C
6
Counter Stand
Front Side Back Side
Card Reader
Indication LED
Back Side Port Cover
1 2 3 4 5
Back Side Ports (Without Cover)
No. Description
1 USB Port
2 RJ45/Ethernet Port
3 Power Supply Cable Port
4 Anti-Theft Tag Insertion Slot
5 USB OTG Port, can be used for debugging purposes
Description of Back Side Components:
All Rights Reserved
C
7
iDISPLAY 10.1” Pro Tablet
Front Side Camera
Front Side
3.5 mm Audio Jack
Right Side
Smart Connection
Adapter Handle
Back Side Camera Back Button
Back Side
Power Button
All Rights Reserved
C
8
Color Description
Blue The tablet battery is fully charged.
Red The tablet battery is being charged.
Blinking or Temporarily Lit
The tablet is being turned on or o, or standby mode is being activated or deactivated.
No Color The tablet is either turned off or running on attery power,
conserving energy.
Power Button LED Color States:
Smart Connection Handle
The Smart Connection adapter can be used as a handle for holding the tablet.
All Rights Reserved
C
Loading...
+ 18 hidden pages