RADIO-CONTROLLED PROJECTION
CLOCK WITH DIGITAL TUNING
AM/FM RADIO
MODEL NO.: RRM968P/RRM968PU
INSTRUCTION MANUAL
INTRODUCTION
Congratulations on your purchasing the Radio-controlled projection
Clock with digital tuning AM/FM radio RRM968P/RRM968PU.
The unit is a multi-functional radio-controlled clock. The RRM968P
- the Central Europe model - is designed to automatically synchronize
its current time and date when brought within an approximate
1500km radius of the radio signal generated from Frankfurt,
Germany (DCF77). The RRM968PU - the UK model - will do the
same when brought within range of the radio signal MSF-60
generated from Rugby, England.
This unit featured with a projection function that allows the user to
display either (1) the Current Time with Indoor Temperature or (2)
the pre-set Alarm time with Indoor Temperature on the ceiling, wall
or other flat surface. In addition, the Alarm status will also be projected,
which is indicated by the Alarm-on icon. The image projected is in a
deep red color which is easily seen in the dark.
This unit also comes with an digital tuning PLL (Phase Lock Loop)
AM/FM radio with 16 user-preset stations (8 for AM and 8 for FM
radio). A Radio Sleep-Timer (auto-off) function is also included.
Other favourable features include EL back-light, indoor temperature
display, hourly-chime function, and user-selectable daily beep alarm
with 8-minute snooze function or Wake-up-to-Radio Alarm.
KEY CONFIGURATION & FEATURES
FRONT VIEW
A1. 3-Line LCD Display
- Displays the time, date, indoor temperature and radio function
1
GB
RRM968PM_EN_R0 7/7/04, 11:01 AM1
GB
A2. [ ] Battery-low indicator
- Displays when battery power of clock is low
A3. [
A4. [
A5. [RADIO] BUTTON
A6. [AM/FM] BUTTON
A7. [+ TUNING -] BUTTONS
A8. [STATION] BUTTON
A9. [VOL + & VOL -] BUTTONS
] Battery-low indicator
- Displays when battery power of radio is low
] Radio-reception icon
- Indicates the strength of the reception of clock radio signal
- Press to turn on or off the radio function
- Press to change between AM or FM radio band (when Radio
is On)
- Press to increase/ decrease the frequency setting
(when Radio is On)
- Press and hold for 2 seconds to trigger radio auto-search
function (when Radio is On)
- Press to switch among the 8 preset stations in the respective
AM or FM radio band (when Radio is On)
- Press and hold for 2 seconds to enter the preset radio station
setting mode (when Radio is On)
- Press to increase / decrease the volume
(when Radio is On)
- Press to increase/ decrease the values in setting modes
- Press and hold for 2 seconds to activate/ deactivate the autoreception of RF clock radio signal (When Radio is Off)
TOP VIEW
B1. [SLEEP] BUTTON
- Press to turn on the radio and activ ate the Sleep T imer function
- Press again to select the time period for the sleep-timer
(auto-off) feature: 15, 30, 60, 90 or 120 minutes
B2. [SNOOZE/ LIGHT] BUTTON
- Press to turn on the EL backlight and projection for 5 seconds
- Press to change the projected image when projection is On
- Press to stop the alarm sound and activate the 8-minute
Snooze function (for Beep alarm only)
B3. [MODE] BUTTON
- Press to toggle among the calendar clock display modes
- Press and hold for 2 seconds to enter the clock setting mode
2
RRM968PM_EN_R0 7/7/04, 11:01 AM2
SIDE VIEW
C1. [ALARM ON/OFF] BUTTON
- Press to turn on/off the alarm function
C2. [ALARM] BUTTON
- Press to display the alarm function
- Press and hold for 2 seconds to enter the alarm-time setting mode
C3. [PROJECTION ON
- Slide to enable/disable continuous projection
(when Adapter is connected)
C4. HEADPHONE JACK
] BUTTON
PROJECTION UNIT
GB
D1. [180º ROTATION] BUTTON
- Press to flip the projected image horizontally
D2. [FOCUS] KNOB
- Rotate to adjust the focus of projection
D3. [IMAGE ROTATION] KNOB
- Rotate to change the image 90º to the left or right
3
RRM968PM_EN_R0 7/7/04, 11:01 AM3
GB
BACK VIEW
BATTERY INSTALLATION
This unit can be operated by batteries or A C power alone as well as
both together.
Using Battery
E1. BATTERY COMPARTMENT
- Accommodates 4 pieces of UM-3 or AA 1.5 V batteries (2
pieces for clock function and 2 pieces for radio function)
E2. EXTENDABLE ANTENNA
- External antenna for FM radio
E3. [RESET] BUTTON
- Press to return all settings to default values
E4. 4.5 V DC JACK WITH RUBBER COVER
- For AC power adapter installation
RRM968PM_EN_R0 7/7/04, 11:01 AM4
4