Oreck AIR12B Owner's Manual

User’s

Guide

Air Purier

Important!

Read this manual carefully, and keep for future reference.

Oreck ProShield® Air Purier

Enjoy

Congratulations on your purchase of the Oreck ProShield

series air purier. Your new air purier contains several

technologies which together make it one of the most advanced

and effective air ltration systems available, all in a

stylish and compact cabinet. This manual describes the

features of the Oreck ProShield Air Purier which in-

cludes a mechanical pre-lter, Truman Cell technology

at the heart of the electronic ltration system, and catalytic

odor and ozone removal. The Oreck ProShield Air Purier

includes a replaceable odor absorber and air revitalizer.

Welcome to our Call. Click. Visit. customer service program.

To speak with an Oreck representative call:

Call

Click

Visit

USA: 1•800•989•3535 Canada: 1•888•676•7325

On the web, point and click at: www.oreck.com or visit www.oreck.com and click locate a store on the top right. Canada: www.oreckcanada.com

Visit Oreck in person at one of over 450 store locations. To nd the nearest store, please call

888•oreck store (1•888•673•2578).

Contents

Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

General Warnings ........................1

Placement Warnings . . . . . . . . . . . . . . . . . . . . . . 2

Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

Operation................................. 5

Cleaning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Cleaning Intervals ........................6

Cleaning the Pre-Filter ....................7

Cleaning the Truman Collector Cell ...........7

Drying the Truman Cell....................8

Cleaning the Catalytic Oxygenator ............9

Cleaning the Exhaust Grille .................9

Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Replacing the Optional Odor Absorber ........ 10

Troubleshooting ........................... 11

Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Spanish ................................. 15

French ..................................33

Safety

General Warnings

IMPORTANT SAFETY

INSTRUCTIONS

• Only use the air purier as described in this manual. Failure to do so may result in serious injury or death.

• Do not use the air purier with a damaged cord or plug. Doing so may result in electric shock, serious injury or death. Have a qualied service technician replace any damaged cords or plugs.

• Do not handle the unit with wet hands. Doing so may result in electrical shock, serious injury or death. Thoroughly dry your hands before handling any part of the air purier.

CAUTION!

• Hair, loose clothing and body parts may get caught in the machine resulting in injury. Keep hair, loose clothing and body parts away from openings and moving parts.

• Do not unplug by pulling on the cord. Doing so may result in electrical sparks and re. Unplug the unit by grasping, and pulling the plug.

• The Oreck ProShield Series is equipped with an ALCI (Appliance Leakage Current Interrupter). The ALCI shuts off the unit in potentially hazardous situations.

Note: A polarized plug has one rounded prong and one straight prong. The rounded end goes into the longest socket slot.

RESET

(Red)

TEST

(Gray)

Note: The ALCI has a Test and Reset button which should be tested each time the unit is plugged in.

Do not remove the tag which provides test instructions from around the cord at the ALCI.

DANGER: Improper installation of ALCI can result in electric shock.

Do not modify or bypass the ALCI. Do not replace any electrical component in this product with anything other than an authorized ORECK replacement part. The risk of electric shock can result if used in the vicinity of improperly grounded stationary appliances (stove, refrigerator, washer, etc.).

• Do not use an extension cord.

• Do not place the air purier near sources of heat, such as stove tops, ovens, radiators or computers.

Placement Warnings

WARNING!

• Do not use the air purier outdoors or on wet surfaces. Doing so may result in electric shock, serious injury or death. Use only indoors and under dry conditions.

• Do not use the air purier in an enclosed space where ammable, combustible or explosive gases are present.

• Do not use in an area where toxic vapors, ammable dust or oxygen tanks are present. Doing so may result in serious injury or death. Check the location and make sure these elements are not present.

CAUTION!

• Do not place open ames, including candles, directly in

front of the air purier.

• Keep objects away from the air intake grille.

It is important to consider the following when deciding on where to locate the air purier:

• Position the air purier on a at, solid, stable surface. Never

place the unit on soft surfaces such as a bed or sofa.

• Position the air purier where the dirty air is not drawn

across your head or body while sitting or sleeping.

• Position the air purier so the plug on the power cord easily

reaches a standard electrical outlet for a polarized plug.

SAVE THESE

INSTRUCTIONS

Features

1. Pre-Filter: Filters large particles such as dust, hair and lint.

2. Cleaning brush: Use to clean the front and back grilles. Stores snuggly in the compartment under the cover.

3. Odor Absorber: Reduces odors and chemical fumes from

glue, solvents and synthetic materials from the air that passes through the lter. The air purier continues to lter particles from the air passing through it with or without the odor absorber.

4. Truman Cell: Captures small particles such as dust, smoke, pollen and pet dander from the air that passes through the lter.

5. Catalytic Oxygenator: This model contains a Catalytic Oxygenator which cannot be removed.

6. Exhaust Grille: Directs the ow of air as it exits the unit.

7. Power Cord: Plug into the outlet to begin use.

8. Removable Base: Allows the air purier to stand vertically.

Simply stand the unit on its base with the Oreck logo facing front and the control panel buttons at the top.

9. Night Light: The right end will softly glow when the night light is activated.

10. Cover Release Button: Press in to release the cover for maintenance access.

11. Truman Collector Cell Light: A solid red light is included as a handy reminder to clean the Truman Cell. A blinking light indicates a malfunction that has caused the Truman cell to shut down and requires attention.

12. Speed Indicator Light: Lighting starts from the center for the lowest motor speed to all ve lights for full motor speed.

13. Odor Absorber Light: The light indicates that it is time to replace the odor absorber.

14. Air Revitalizer: This button activates the Air Revitalizer feature which is designed to run continuously, but may be turned OFF if desired. Provides additional air freshness via the release of negative ions, which can also cause dust particles to clump together and fall out of the air passing through the air purier. You may notice faster dust buildup on the unit and surrounding objects with the Air Revitalizer turned ON.

15. Motor Speed/Power Button: Press the power buttons repeatedly for the desired speed.

• Low for Silence Technology®. It’s the quietest operation, cleaning the air as effectively but more slowly than the high setting.

• Medium for normal use

• High for maximum cleaning

14 15

5 6

16. Night Light Button: Repeatedly press this button to change

the lighting scheme to best suit your preference.

17. Front Grille: Air enters here for the rst stage of cleaning.

Operation

1. Place. Locate the air purier on a hard surface such as

a table or desk. The unit can be placed horizontally or vertically depending on your space. Be sure the grille is not blocked by other objects and there are no candles or ames near the unit.

2. Plug In. Plug into nearest standard electrical outlet that

accepts a polarized plug.

3. Select the air cleaning speed. Press the motor speed/power

button until you reach the desired speed.

Position

so that the air is not

drawn across the

head or body.

Cleaning

Cleaning Intervals

Proper care and cleaning of the air purier is critical to performance. The following chart shows the cleaning intervals and method.

Part Cleaning

Time

Cabinet As needed Wipe with damp cloth rst.

If required, follow with mild, non-abrasive cleaner.

Method

Truman Cell 2 to 4

weeks

Pre-Filter 2 to 4

weeks

Odor Absorber

Air Direction Grille

Catalytic Ozone Converter

12 months, or as needed

As needed Use the brush provided with the

As needed Vacuum the front surface gently

WARNING!

Spray Oreck Assail-a-Cell® cleaner or soak in warm water or warm water with mild liquid detergent. Rinse and dry thoroughly.

Rinse thoroughly in warm water or as needed.

Replace (optional for odor removal). Do not wash. Vacuum gently with a soft brush attachment to clean if necessary.

air purier to brush away debris in between the slots.

with a soft brush attachment. Do not use any liquids for cleaning.

Cleaning the unit while it is plugged in may result in electric shock, electric spark and serious injury. Unplug the unit before cleaning or maintenance.

air purier

will not run if the

Top Cover is not

closed securely.

The

Cleaning the Pre-Filter

1. Unplug the air purier and lay it on its side with the hinged

cover on top.

2. Open the Top Cover by pressing the Cover Release button.

3. Pull the Pre-Filter straight up and out of the Cabinet.

4. Thoroughly rinse the Pre-Filter and let it air dry before

placing it back in the Cabinet. Do not use heated or compressed air as part of the drying process.

5. Slide the Pre-Filter back into the unit.

6. Close the Top Cover securely.

Cleaning the Truman Collector Cell

Note: The Truman Cell may require more frequent cleaning

if “arcing” occurs. Arcing is a sharp snapping sound that occurs when large particles are collected in the Truman Cell. If prolonged or continuous arcing occurs the Truman Cell should be cleaned.

1.Unplug the air purier and lay it on its side with the hinged

cover on top.

2.Open the Top Cover by pressing the Cover Release button.

3. Remove the collector cell by pulling up on the handle

(located across the top of the Truman Cell). Lift the collector cell straight up and out.

4.Place in sink, bathtub or other location where cleaner can

cover every surface.

Oreck’s

Assail-a-Cell

cleaner is an

excellent way to

clean the

collector cell.

5. Spray Oreck Assail-A-Cell® cleaner between each Cell Plate

and cover each surface. Allow the cleaner to soak for a few minutes but do not let it dry. Thoroughly rinse the Truman Cell with clean water.

An alternative method to clean the Truman Cell is to rinse or

soak it in warm water for loose debris. Mild liquid dish detergent in water may also be used to help break down tough dirt and residue. Thoroughly rinse the Truman Cell with clean water.

Note: To prevent damage to the components of the Truman

Cell, do not put in dishwasher or use a cotton swab.

Tough residue such as tar from tobacco smoke may need

additional cleaning or longer soaking.

6. Shake excess water from the Truman cell to speed up drying

time. Do not use heated or compressed air to dry.

7. Place the Truman Cell back into the unit by sliding it straight

down into the slots. The Truman Cell is specially designed so that it can only be inserted in one direction.

8. Close the Top Cover securely.

Drying the Truman Cell

Note: The Truman Cell must be completely dry after cleaning

in order to operate properly. A drying mode is available to help remove any residual moisture. While in this mode, the fan will be running on Medium speed, and no power will be supplied to the Truman Cell. Once the unit detects that the Truman Cell

is completely dry, it will return to its original operating settings and function as normal.

“Dry Mode” Operation

If the power supply detects that the Truman Cell is wet, it shuts down power to the cell and causes the Collector Cell light to blink rapidly.

1. While the collector cell light is blinking, press and hold the power button to initiate “Dry Mode”

2. Next, the following will all happen simultaneously:

• Thecenterhalolightsegmentsaboveandbelowthe powerbuttonwillash3times.

• Theunitwillswitchtomediumspeed.

• TheCollectorCelllightwillstarttoblinkinaslow pattern.

4. Once in “DryMode”

• Theunitwillrunfor60minutesandthenattemptto resetthepowersupplytotheTrumanCell.

• Ifthepowersupplysuccessfullyrestarts,theunitwill returntoitsoriginalspeedandrunasnormal.

• Ifnotsuccessful,itwillgothroughthesameprocess uptotwomoretimes.

• Ifstillnotsuccessfulafterthethirdtry,thecellislikely damagedorisshortingoutduetothepresenceofa foreignobject;itwillreturntotheoriginalspeedand theCollectorCelllightwillblinkwitharapidblink patternindenitelyuntiltheunitisreset.

Cleaning the Catalytic Oxygenator

1. Unplug the air purier and lay it on its side with the hinged

cover on top.

2. Open the Top Cover by pressing the Cover Release button.

3. Remove the Odor Absorber, Pre-Filter, and Collector Cell.

4. Vacuum the front face of the lter with a soft-brush

attachment only. Do not use liquids to clean.

5. Replace the Odor Absorber, Collector Cell and Pre-Filter.

Cleaning the Exhaust Grille

1. Remove the Cleaning Brush from the storage slot located

under the Top Cover.

2. Brush away debris that has collected between the Grille Slots.

3. Return the Cleaning Brush to the storage slot.

Maintenance

Replacing the Optional Odor Absorber

1. Unplug the air purier and lay it on its side with the hinged

cover on top.

2. Open the Top Cover by pressing the Cover Release button.

3. Flip up the two tabs located on top of the Odor Absorber.

4. Use the tabs to gently lift the odor absorber from the cabinet.

5. Replace with a new Odor Absorber. Fold the tabs down. Do

not force the Odor Absorber into the slot.

6. Close the Top Cover securely.

Trouble-

Service problems that appear to be major can often be solved easily. You can be your own troubleshooter by reviewing this guide.

shooting

All other servicing should be done by an Oreck authorized service center.

Problem Check Solution

Unit does not turn ON

Truman Cell light has turned solid red.

Truman Cell light is blinking red

Unit does not remove pollutants.

Unit sparks, crackles and pops.

• Power Cord

• Selector Switch

• Top Cover

• ALCI Plug

Truman Cell • A solid red light is a 30 day cleaning

Truman Cell • A fast blinking light indicates the power

Truman Cell • Clean the Truman Cell and make sure it is

Truman Cell • Sparking or popping noise (arcing) can

• Plug in Power Cord

• Set Selector Switch for desired blower speed.

• Make sure the top cover is securely closed

• Press the red reset button each time you

plug in the ALCI safety device.

reminder. Wash Collector Cell. Make sure it is thoroughly clean and dry before reinstalling.

supply has shut down due to arcing or short circuit. The cell should be inspected and cleaned, repaired, or replaced.

• A slow blinking light indicates the unit is

in Dry Mode.

completely dry before reinstalling.

• Truman cell may be damaged. Contact

Oreck for service.

occur when a large particle is captured in the Truman Cell. If the unit is arcing excessively, the cell may be dirty. Try cleaning the Truman Cell.

• If excessive arcing continues after proper

cleaning, the Truman Cell may be damaged or wet. If damaged, contact Oreck for service.

Problem Check Solution

Odor Absorber light on unit has turned red.

Odor Absorber • Replace odor absorber if desired.

• If odor absorber is not replaced, remove old odor absorber to turn off Check Odor Absorber light.

Does not remove odor.

Unit still does not operate properly.

Odor Absorber • Vacuum odor absorber with a soft brush

attachment if dirty. Do not use any liquids to clean the Odor Absorber.

• Replace odor absorber if desired.

Check all the

Contact Oreck for service.

above points.

Warranty

ORECK MANUFACTURING COMPANY: (Oreck Manufacturing Company gives you the following limited warranty for this product only if it was originally purchased for residential use, not for resale, from Oreck or an Oreck Authorized Retail Dealer.)

Oreck will repair or replace, free of charge, to the original purchaser, any part that is found to be defective in material or workmanship within three (3) years following the date of purchase for all residential models. NOTE: If the unit is used commercially, a one (1) year overall warranty applies.

This limited warranty does not cover the replacement of expendable or consumable parts such as lters, cartridges, and other parts subject to normal wear unless they are defective in material or workmanship.

This limited warranty does not apply to any part subjected to accident, abuse, commercial use, alteration, misuse, damage caused by an act of God, the use of voltages other than on the data plate of this product or service of this product by other than Oreck or a participating Factory Authorized Service Center.

Oreck does not authorize any person or representative to assume or grant any other warranty obligation with the sale of this product.

Oreck’s limited warranty is valid only if you retain proof of purchase from Oreck or an Oreck Authorized Retail Dealer for this product. If you purchase this product from any other source, your purchase is “AS IS,” which means Oreck grants you no warranty, and that you, not Oreck, assume the entire risk of the quality and performance of this product, including the entire cost of any necessary servicing or repairs of any defects.

Oreck’s liability for damages to you for any costs whatsoever arising out of this statement of limited warranty shall be limited to the amount paid for this product at the time of original purchase, and Oreck shall not be liable for any direct, indirect, consequential or incidental damages arising out of the use or inability to use this product. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you.

ALL EXPRESS AND IMPLIED WARRANTIES OTHER THAN THE LIMITED WARRANTY SET FORTH ABOVE, FOR THIS PRODUCT, INCLUDING IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY DENIED.

This warranty gives you specic legal rights, and you may also have other rights which vary from state to state.

+ 39 hidden pages