Onkyo TX-RZ920 User Manual

Firmware Update Onkyo TX-RZ920
(4-18-2019)

We are pleased to offer this firmware update for the best possible
performance of your Onkyo AV Receiver.

This update may be installed via USB or Network. We
recommend USB for faster, more reliable installation.

TX-RZ920
(Current Version

The 4/18/2019 update will address the following and includes
previous updates:

1. Support AirPlay2.

2. https://www.onkyo.com/manual/sup/upd/airplay2_onk.pdf

3. Add setting to switch ''Standard'' and ''Enhanced'' according to
HDMI 4K signal format.

https://www.onkyo.com/manual/sup/upd/hdmi_4k_onk.pdf

4.

5. Minor bug fixes and improvements stability.

1081-0010-3060-0010)

Previous Updates:
The 12/18/2018 update will address the following and includes
previous updates:

6. Minor bug fixes and improvements stability.

The 10/11/2018 update will address the following and includes
previous updates:

1. Adds support for Amazon Music.

• Amazon Music service requires that you have Amazon Prime
account or Amazon Music Unlimited account

• Onkyo Controller App is required for initial set-up of Amazon

Music.

For detail about updated function, please refer to the link below.

http://www.onkyo.com/manual/sup/upd/amazon_onk.pdf

2. Adds support for eARC.

HDMI cable needs to be Ethernet-enabled HDMI cable.

For detail about updated function, please refer to the link below.

http://www.onkyo.com/manual/sup/upd/earc_onk.pdf

3. Adds setting of Preset Volume for Sonos Connect.

For detail about updated function, please refer to the link below.

http://www.onkyo.com/manual/sup/upd/sonosconnect_onk.pdf

4. Enhanced security.

Depending on the Firmware version, update will be needed 2 times.

5. Minor bug fixes and improvements stability.

The 8/21/2018 update will address the following and includes
previous updates:

1. Enhanced security.

2. Adds support for Deezer HiFi.

3. Depending on the Firmware version, update will be needed 2
times.

Previous Updates (latest firmware includes all previous)

The 6-5-2018 update will address the following & includes
previous updates:

1. Adds support for Sonos Connect (Sonos Connect required)

2. Minor bug fixes and improvements

The 4/4/2018 update will address the following:

1. Reduce noise during playback via USB/Network

The 1/29/2018 update will address the following:

1. Adds support for external audio inputs for "FlareConnect".
*For detail about external audio inputs by model, please refer to:

http://www.onkyo.com/flareconnect/

2. Minor bug fixes and improvements stability.

The 11-2-2017 update will address the following:

1. Adds support for new multi-room audio playback function
"FlareConnect".

*All audio devices in group and "Onkyo Controller" App is required to
update to the latest version.

• Setup Guide: www.intl.onkyo.com/next_generation/setup.html

Introduction of multi-room audio
functions:

www.intl.onkyo.com/next_generation

3. Improvement for pass-through function of Dolby Vision signal.

*Set the "HDMI OUT" to "MAIN+SUB" (EXCEPT TX-NR575), the Dolby Vision
video option will then become available in the Set Up menu. Dolby Vision is only
available from the HDMI OUT MAIN terminal.

4. Minor bug fixes and improvements stability.

The 8/31/2017 update will address the following:

1.

Adds support for DTS Play-Fi.

*To use Play-Fi, you need to download the application.

http://www.onkyo.com/manual/sup/upd/playfi_onk.pdf

Before starting to use Play-Fi, set "On" at the "Network Standby" ("NET Stby")
setting. The unit will automatically power on and change the selector to "NET" or
"Network"

2. Adds "Play Queue" function.

For detail about updated function, please refer to the link below.

http://www.onkyo.com/manual/sup/upd/queue_onk.pdf