Onkyo HT-S9700 Advanced Manual

CONTENTS

HT-R993

AV RECEIVER

Advanced Manual

AM/FM Radio Receiving Function 2

Tuning into a Radio Station 2 Presetting an AM/FM Radio Station 3 Using RDS (European model) 3

Playing Music Files on a USB Storage Device 5 Listening to Internet Radio 6

About Internet Radio 6 TuneIn 6

Pandora SiriusXM Internet Radio (North American only) 8 Slacker Personal Radio (North American only) 9 Registering Other Internet Radios 10

DLNA Music Streaming 12

About DLNA 12 Configuring the Windows Media DLNA Playback 12 Controlling Remote Playback from a PC 13

Music Streaming from a Shared Folder 14

About Shared Folder 14 Setting PC 14 Playing from a Shared Folder 14

Using Remote Controller for Playing Music Files 16

About the Remote Controller 16

–Getting Started (U.S. only) 7

Player 12

Remote Controller Buttons 16 Icons Displayed during Playback 16

Using the Listening Modes 17

Selecting Listening Mode 17 Effects of Listening Modes 18 Checking the Input Format 21

Advanced Settings 22

How to Set 22

1. Input/Output Assign 23

2. Speaker Setup 26

3. Audio Adjust 30

4. Source Setup 31

5. Listening Mode Preset 34

6. Miscellaneous 34

7. Hardware Setup 35

8. Remote Controller Setup 40

9. Lock Setup 40

Operating Other Components with the Remote Controller 41

Functions of REMOTE MODE Buttons 41 Programming Remote Control Codes 41 TV operation 42 Blu-ray Disc player/DVD player/DVD recorder operation 43

VCR/PVR operation 43 Satellite receiver / Cable receiver operation 44 CD player operation 44 Cassette tape deck operation 45 To operate CEC-compatible components 45

Installation and Connection of Height Speakers 46

Using the Height Speakers 46 Installation Method of the Height Speakers by Type 46

Connecting and Operating Onkyo RI Components 48

About RI Function 48 RI Connection and Setting 48 iPod/iPhone Operation 49

Firmware Update 50

About Firmware Update 50 Updating the Firmware via Network 50 Updating the Firmware via USB 51

Troubleshooting 53 Reference information 59

AM/FM Radio Receiving Function

Tuning into a Radio Station



Tuning into stations automatically

Press TUNER on the main unit several times to select

either "AM" or "FM".

Press TUNING MODE so that the "AUTO" indicator on

the display lights.

Press TUNING to start automatic tuning.

r Searching automatically stops when a station is

found. When tuned into a radio station, the " TUNED " indicator on the display lights. If FM stereo broadcasting is tuned, the "FM STEREO" indicator lights.

r No sound is output while the "

is off.

TUNED " indicator



Tuning into stations manually

Press TUNER on the main unit several times to select

either "AM" or "FM".

Press TUNING MODE so that the "AUTO" indicator on

the display goes off.

Press TUNING to select the desired radio station.

r The frequency changes by 1 step each time

you press the button. The frequency changes continuously if the button is held down and stops when the button is released. Tune by looking at the display.

To return the display to "AUTO": Press TUNING MODE on the main unit again. A station is automatically tuned. Normally "AUTO" should be displayed.



Tuning into stations by frequency

It allows you to directly enter the frequency of the radio station you want to listen to.

Press TUNER on the remote controller several times to

select either "AM" or "FM".

Press D.TUN.

Using the number buttons, enter the frequency of the

radio station within 8 seconds.

r To enter 87.5 (FM), for example, press 8, 7, 5, or 8,

7, 5, 0. If you entered a wrong number, press D.TUN and enter a correct one.

When the signal from an FM radio station is weak: Radio wave may be weak depending on the building structure and environmental conditions. In that case, manually tune into the radio station of your choice by referring to the next section.

AM/FM Radio Receiving Function

Presetting an AM/FM Radio Station

It allows you to register up to 40 of your favorite AM/FM radio stations. Registering radio stations in advance allows you to tune into your radio station of choice directly.



Registration Procedure

Tune into the AM/FM radio station you want to register.

Press MEMORY on the unit so that the preset number

on the display flashes.

Repeatedly press PRESET to select a number

between 1 and 40 while the preset number is flashing (about 8 seconds).

Press MEMORY again to register the station.

r When the station is registered, the preset number

stops flashing.

r Repeat this procedure for all of your favorite AM/FM

radio stations.



Selecting a Preset Radio Station

Press CH +/- on the remote controller to select a preset

number.

r Alternatively you can press

main unit. You can also select by directly entering the preset number with the number buttons on the remote controller.



Deleting a Preset Radio Station

Press CH +/- on the remote controller to select the

preset number to delete.

Press and hold MEMORY on the main unit and press

TUNING MODE to delete the preset number.

r When deleted, the number on the display goes off.

PRESET on the

Using RDS (European model)

RDS stands for Radio Data System and is a method of transmitting data in FM radio signals.

rRDS works only in areas where RDS broadcasts are

available.

rIn some cases, the text information appeared on the

display is not identical to the content transmitted by the RDS station. Furthermore, unexpected characters may be displayed when the unit receives unsupported characters. However, this is not a malfunction.

rIf the signal from an RDS station is weak, the RDS data

may be displayed continuously or not at all.

PS (Program Service): Tuning into a radio station distributing Program Service information displays the radio station name. Pressing DISPLAY displays the frequency for 3 seconds.

RT (Radio Text): Tuning into a radio station transmitting Radio Text information displays text on the display of the unit.

PTY (Program Type): Allows you to search for RDS stations by program type.

TP (Traffic Program): Allows you to search for radio stations transmitting traffic information.



Displaying Radio Text (RT)

Press RT/PTY/TP on the main unit once.

r The Radio Text (RT) is displayed scrolling across

the display. "No Text Data" is displayed when no text information is available.



Searching by Type (PTY)

Press RT/PTY/TP on the main unit twice.

r The current program type appears on the display.

Press PRESET to select the type of program to

search for.

r The following RDS station types are displayed:

None News (News reports) Affairs (Current affairs) Info (Information) Sport Educate (Education) Drama Culture Science (Science and technology) Varied Pop M (Pop music) Rock M (Rock music) Easy M (Middle of the road music) Light M (Light classics) Classics (Serious classics) Other M (Other music) Weather Finance Children (Children’s programmes) Social (Social affairs) Religion Phone In Travel Leisure Jazz (Jazz music) Country (Country music) Nation M (National music) Oldies (Oldies music)

Folk M (Folk music) Document (Documentary)

Press ENTER to search the radio stations of the

selected type.

When such a radio station is found, the indication on the

display flashes. Then, press ENTER again.

r If no stations are found, the message “Not Found” is

displayed.



Listening to Traffic Information (TP)

Press RT/PTY/TP on the main unit three times.

r "[TP]" will be displayed if traffic information is

transmitted by the radio station you are tuned in. "TP" only is displayed if no traffic information is available.

Press ENTER to search a radio station distributing traffic

information.

When such a radio station is found, searching stops and

playing traffic information starts.

r "Not Found" is displayed if no radio station

distributing traffic information is found.

AM/FM Radio Receiving Function

Playing Music Files on a USB

Storage Device

Operation: You can set up by viewing the guidance displayed on the TV screen. To display the guidance, you need to make HDMI connection between the unit and TV. Select the item with the cursor buttons of the remote controller and press ENTER to confirm your selection. To return to the previous screen, press RETURN.

Plug your USB storage device with the music files into

the USB port of the unit so that "USB" lights on the display.

r If the "USB" indicator flashes, check whether the

USB storage device is plugged in properly.

r Do not unplug the USB storage device while

"Connecting..." is appeared on the display. This may cause data corruption or malfunction.

Press ENTER.

r The list of folders and music files on the USB storage

device are displayed. Select the folder with the cursors and press ENTER to confirm your selection.

With the cursors, select the music file to play, and then

press ENTER or

to start playback.

Playing Content from a USB Storage Device



Playing Back

Press USB on the remote controller to select "USB".

Listening to Internet Radio

About Internet Radio

Internet radio, also called net radio, web radio or streaming radio, is an audio service accessible at the websites of service providers who distribute music and audio programs in digital format. There are numerous websites all over the world, from terrestrial station, special station to personal website that provide such a service. The unit comes preset with Internet radio stations (¼) such as TuneIn for you to enjoy these services, just by connecting the unit to the Internet.

½

Network services or contents may become unavailable if the service provider terminates its service.

TuneIn

With more than 70,000 radio stations and 2 million ondemand programs registered, TuneIn is a service where you can enjoy music, sports and news from all over the world.



Playing Back

Press NET on the remote controller to display the NET

TOP screen.

r The "NET" indicator on the display stays lit. r Alternatively you can select "Network Service" in the

HOME menu.

Listening to Internet Radio

Select "TuneIn" with the cursors and press ENTER to

display the TuneIn top screen. With the cursors, select a radio station or program and

press ENTER to start playing.



Regarding the TuneIn Menu

To display the TuneIn menu, press MENU or ENTER while playing a radio station. Selecting the corresponding menu item with the cursors and pressing ENTER allows you to perform the following operations:

Add to My Presets: Registers radio stations and programs in your "My Presets" within TuneIn. This allows you to play registered radio stations and programs with a simple operation. ("My Presets" is not displayed if it is empty.)

Remove from My Presets: Deletes a radio station or program from your "My Presets" within TuneIn.

Report a problem: Reports a problem or interactively solves a problem related to TuneIn.

View Schedule: Displays the radio station or program schedule.

Clear recents: Clears all radio stations and programs from the "Recents" within TuneIn. (This menu is displayed only when a radio station or program inside the "Recents" is being played.)

Add to My Favorites: Registers radio stations and programs in "My Favorites" of "Network Service". This allows you to play registered radio stations and programs with a simple operation.

Listening to Internet Radio



Regarding the TuneIn Account

Creating an account on the TuneIn website (tunein.com) and logging in it from the unit allows you to automatically add radio stations and programs to your "My Presets" on the unit as you save them on the website . To display a radio station registered in "My Presets", you must log into TuneIn from the unit. To log in, select "Login" "I have a TuneIn account" in the "TuneIn" top list on the unit, and then enter your user name and password.

rIf you associate the device on My Page within the TuneIn

website using the registration code obtained by selecting "Login" - "Login with a registration code" on the unit, you can log in without entering the user name and password.

Pandora®–Getting Started (U.S. only)

Pandora is a free, personalized Internet radio service that plays the music you know and helps you discover music you’ll love.



Playing Back

Press NET on the remote controller to display NET TOP

screen.

r The "NET" indicator on the display stays lit. To

display the NET TOP screen, you can alternatively press HOME, select "Network Service" on the displayed HOME menu, and then press ENTER.

With the cursors on the remote controller, select

“Pandora”, and then press ENTER. Use / to select “I have a Pandora Account” or “I’m new

to Pandora” and then press ENTER. If you are new to Pandora select “I’m new to Pandora”. You will see an activation code on your TV screen. Please write down this code. Go to an Internet connected computer and point your browser to www. pandora.com/onkyo. Enter your activation code and then follow the instructions to create your Pandora account and your personalized Pandora stations. You can create your stations by entering your favorite tracks and artists when prompted. After you have created your account and stations you can return to your Onkyo receiver and press ENTER to begin listening to your personalized Pandora. If you have an existing Pandora account, you can add your Pandora account to your Onkyo receiver by selecting “I have a Pandora Account” and logging in with your email and password.

r If you want to use multiple user accounts, see “Using

Multiple Accounts”. Login can be made from the “Users” screen.

To play a station, use / to select the station from your

station list, and then press ENTER. Playback starts and the playback screen appears.



Create a New Station

Enter the name of a track, artist, or genre and Pandora will create a unique radio station for you based on the musical qualities of that track, artist, or genre.

I like this track: Give a track “thumbs-up” and Pandora will play more music like it.

I don’t like this track: Give a track “thumbs-down” and Pandora will ban that track from the current station.

Why is this track playing?: Discover some of the musical attributes that Pandora uses to create your personal radio stations.

I’m tired of this track: If you are tired of a track, you can put the track to sleep and Pandora will not play it for one month.

Create station from this artist: Creates a radio station from this artist.

Create station from this track: Creates a radio station from this track.

Delete this station: This will permanently delete a station from your Pandora account. All of your thumbs feedback will be lost should you choose to re-create the station with the same track or artist.

Rename this station: Lets you rename the current radio station.

Bookmark this artist: Pandora will bookmark your favorite artist for your profile on www.pandora.com.

Bookmark this track: Pandora will bookmark the current track and allow you to buy them all from Amazon or iTunes in one step!

Add to My Favorites: Adds a station to My Favorites list.

PANDORA, the PANDORA logo, and the Pandora trade dress are trademarks or registered trademarks of Pandora Media, Inc. Used with permission.

SiriusXM Internet Radio (North American only)

If you want to listen to the service, you must subscribe. To subscribe go to www.siriusxm.com/internetradio with your computer. When you subscribe, you will be provided with a username and password which has to be entered into the AV receiver. To use SiriusXM Internet Radio, you must have your AV receiver connected to the Internet. Using the remote control, follow these steps:



Playing Back

Press NET on the remote controller to display NET TOP

screen.

r The "NET" indicator on the display stays lit. To

display the NET TOP screen, you can alternatively press HOME, select "Network Service" on the displayed HOME menu, and then press ENTER.

With the cursors on the remote controller, select

“SiriusXM Internet Radio”, and then press ENTER. Select “Sign In”, and then press ENTER. If you have an

existing SIRIUS account, you can sign in by selecting “Sign In”. Enter your user name and password in the next keyboard screen, or in Web Setup. If you don’t know your username or password, call Sirius XM at (888) 539-7474 for assistance.

r If you want to use multiple user accounts, see “Using

Multiple Accounts”. Login can be made from the “Users” screen.

Using the keyboard screen

Use / / / and ENTER to enter your user name and password.

Select “OK”.

Press ENTER. The “Confirm your entries” screen appears.

Press ENTER. “Please wait...” appears and then “SiriusXM Internet Radio” screen appears which displays the category available for selection.

Use / to select the category and then press ENTER.

The channel list screen for the selected category appears. Use / to select the desired channel and then press

ENTER. The playback screen for the selected channel appears and you can listen to SiriusXM Internet Radio. You can control the tracks with the buttons on the remote control. Enabled buttons:

, , ,

Listening to Internet Radio

Add to My Favorites: Adds a channel to My Favorites list.

Add to Presets: Adds the currently playing station to presets list.

Delete from Presets: Deletes the currently playing station from presets list.

SiriusXM Internet Radio subscriptions are sold separately and are governed by the Sirius Terms and Conditions (see www.sirius.com). Be sure to read this agreement before you purchase your subscription. Sirius, XM and all related marks and logos are trademarks of Sirius XM Radio Inc. and its subsidiaries. All rights reserved.

Slacker Personal Radio (North American only)



Playing Back

Press NET on the remote controller to display NET TOP

screen.

r The "NET" indicator on the display stays lit. To

display the NET TOP screen, you can alternatively press HOME, select "Network Service" on the displayed HOME menu, and then press ENTER.

With the cursors on the remote controller, select “Slacker

Personal Radio”, and then press ENTER. If you do not have an account, create one on the Slacker

website (www.slacker.com) with your computer. If you

already have a Slacker account, select “Sign in to your account” and then press ENTER. The keyboard screen appears. You can enter information from the remote control or the keys on the main unit. If there are no mistakes in the information you have

entered, use An account information confirmation screen appears. If you do not have an account, select “Access without

r If you want to use multiple user accounts, see “Using

Multiple Accounts”. Login can be made from the “Users” screen.

Use / to select a menu item and then press ENTER.

To sign out, use and then press ENTER. Use / to select a station and then press ENTER or

to start playback from the station. The playback screen appears. You can control the tracks with the buttons on the

remote control. Enabled buttons:

Rate Song as Favorite: Stores information to server, making it more likely that the song will be played again.

Ban Song: Stores information to server, making it less likely that the song will be played again.

Ban Artist: Stores information to server, making it less likely that the songs from this artist will be played again.

Mark Favorite: Adds the currently playing station to your favorites.

Unmark Favorite: Deletes the currently playing station from your favorites.

Add song to Library: Adds the currently playing track to your library.

Delete song from Library: Deletes the currently playing track from your library.

Add to My Favorites: Adds a station or song to My Favorites list.

/ / / to select “OK” then press ENTER.

/ to select “Sign out” from this screen

, , ,

Listening to Internet Radio

Using Multiple Accounts: The AV receiver supports multiple user accounts, which means you can freely switch between several logins. After registering user accounts, login is performed from the “Users” screen. Press MENU while the Users screen is displayed. "Add new user", "Remove this user" menu appear. You can either store a new user account, or delete an existing one.

rSome of the services don’t allow the use of multiple user

accounts. rYou can store up to 10 user accounts. rTo switch between accounts you must first log out from

the current account, and log in again on the "Users"

screen.

Listening to Internet Radio

Registering Other Internet Radios

To listen to other Internet radio program, register the program in the "My Favorites" list on the NET TOP screen as described below. The unit supports Internet radio stations stored in the following formats: PLS (URL ending in .pls), M3U (URL ending in .m3u) and RSS (URL ending in rss/rdf/xml).

rYou can register up to 40 Internet radio stations. rDepending on the data type and file format for playback,

you may not be able to play an Internet radio station even when its format is PLS, M3U or Podcast (RSS).

rAvailable services may vary depending on your area of

residence.



Registration Procedure

Before operation: The name and URL of the radio station

that you want to add are required for registration. Make the following preparations.

Press NET on the remote controller to display the NET

TOP screen.

r The "NET" indicator on the display stays lit.

Select "My Favorites" with the cursors and press ENTER

to display the "My Favorites" list screen. With the cursors, select a blank area of "My Favorites"

and press MENU to display the menu screen.

Select "Create new station" with the cursors and press

ENTER to display the keyboard screen. Enter the name and URL of the radio station to add.

r Select "Shift" and press ENTER to toggle between

upper and lower case. Select " ENTER to move the cursor to the selected direction. Select "Back Space" and press ENTER to delete the character at the left of the cursor position.

" or " " and press



Registering a Station with PC

Before operation: The name and URL of the radio station

that you want to add are required for registration. Make the following preparations.

Press RCV on the remote controller.

r Always press RCV first to change the remote

controller to RECEIVER mode (the mode to operate this unit) since its mode may be changed to operate another component.

Press HOME to display the HOME menu.

With the cursors, select "Setup", and then press ENTER.

9KVJVJGEWTUQTUUGNGEV|*CTFYCTG5GVWR0GVYQTM

-" IP Address" to display the IP address. r Write down the IP address since you will need it

later.

Open the Internet browser on your PC or smartphone

and enter the IP address of the unit in the URL field.

r When using Internet Explorer, you can alternatively

select "Open" in the "File" menu to enter the IP address.

r Information of the unit is displayed on the browser.

("WEB Setup")

Click "My Favorites" tab, then enter the name and URL

of the Internet radio station. Click "Save" to register the entered Internet radio station

in "My Favorites".

To rename the registered radio station: When the radio station is selected from the "My Favorites" list, press MENU to display the menu screen. Select "Rename this station" with the cursors and press ENTER to display the keyboard screen. Rename the station as desired.

rRadio stations can be renamed also from "WEB Setup".



Playing a Registered Radio Station

Press NET on the remote controller to display the NET

TOP screen.

r The "NET" indicator on the display stays lit.

Select "My Favorites" with the cursors and press ENTER

display the registered Internet radio stations.

With the cursors, select a radio station and press

ENTER to start playing.



Deleting a Registered Radio Station

Press NET on the remote controller to display the NET

TOP screen.

r The "NET" indicator on the display stays lit.

With the cursors, select the radio station to delete and

press MENU to display the menu screen.

With the cursors, select "Delete from My Favorites", and

then press ENTER. A confirmation screen will appear. With the cursors, select "OK", and then press ENTER to

delete the radio station.

r Select "Back" if you return to the previous screen. r Radio stations can be deleted also from "WEB

Setup".

Listening to Internet Radio

Select "My Favorites" with the cursors and press ENTER

to display the registered Internet radio stations.

DLNA Music Streaming

About DLNA

Digital Living Network Alliance (DLNA) can be referred to as a technology standard or the industry group to develop the technology standard to interconnect and use AV components, computers and other devices in a home network. This unit allows you to use DLNA to play music files stored on a computer or a hard disk connected to your home network (NAS device). Make sure this unit and a computer or NAS device are connected to the same router.

Internet radio

Router

rTo stream a music file, you need a NAS device with

DLNA server functions or a PC where a player (e.g., Windows Media® Player 11 or12) with DLNA server functions is installed. To enable streaming with Windows Media® Player 11 or 12, you must first configure the settings.

NAS

Configuring the Windows Media® Player



Windows Media

Turn on your PC and start Windows Media® Player 11.

In the "Library" menu, select "Media Sharing" to display

a dialog box. Select the "Share my media" check box, and then click

"OK" to display the compatible devices. Select this unit, and then click "Allow".

r When it is clicked, the corresponding icon is

checked.

Click "OK" to close the dialog.



Windows Media

Turn on your PC and start Windows Media® Player 12.

In the "Stream" menu, select "Turn on media streaming"

to display a dialog box.

r If media streaming is already turned on, select "More

streaming options..." in the "Stream" menu to list players in the network, and then go to step 4.

Click "Turn on media streaming" to list players in the

network. Select this unit in "Media streaming options" and check

that it is set to "Allow". Click "OK" to close the dialog.

Player 11

Player 12

DLNA Playback



Playing Back

Start the server (Windows Media® Player 11, Windows

Media

Player 12, or NAS device) containing the music files to play. Press NET on the remote controller to display the NET TOP screen.

r The "NET" indicator on the display stays lit. If the

"NET" indicator flashes, the unit is not properly connected to the network. When using a wired LAN connection, check the Ethernet cable connection, and when using a wireless LAN connection, check whether the "Wi-Fi" indicator on the left side of the unit is lit.

Select "DLNA" with the cursors and press ENTER.

Select the target server with the cursors and press

ENTER to display the items list screen.

r Searching does not work in servers that do not

support search functions.

r The unit cannot access pictures and videos stored

on servers.

r Contents stored on the server may not be displayed

depending on the server sharing settings.

With the cursors, select the music file to play, and then

press ENTER or

r If "No Item" is displayed, check whether the network

is properly connected.

to start playback.

Controlling Remote Playback from a PC

You can use this unit to play music files stored on your PC by operating the PC inside your home network. The unit supports remote playback with Windows Media® Player 12. To use the remote playback function with Windows Media® Player 12, Windows Media® Player 12 must be configured in advance.

rUsing a DLNA-compatible controller (such as an

Android application), you can select a music file stored on Windows Media by operating the controller. For information on how to remotely play using the controller, refer to the controller's instruction manual.



Setting PC

Turn on your PC and start Windows Media® Player 12.

In the "Stream" menu, select "Turn on media streaming"

to display a dialog box.

r If media streaming is already turned on, select "More

streaming options..." in the "Stream" menu to list players in the network, and then go to step 4.

Player 12 and stream to this unit

Click "Turn on media streaming" to list players in the

network. Select this unit in "Media streaming options" and check

that it is set to "Allow". Click "OK" to close the dialog box.

Open the "Stream" menu and check that "Allow remote

control of my Player..." is checked.



Remote playback

Turn on the power of the unit.

Turn on your PC and start Windows Media® Player 12.

Select and right-click the music file to play with Windows

Media

Player 12.

r To remotely play a music file on another server, open

the target server from "Other Libraries" and select

the music file to play. Select this unit in "Play to" to open the "Play to" window of Windows Media unit.

r Operations during remote playback are possible from

the "Play to" window on the PC. The playback screen

is displayed on the TV connected to the HDMI output

of the unit. If your PC is running on Windows

"Play to", and then select this unit. Adjust the volume using the volume bar on the "Play to" window.

r Sometimes, the volume displayed on the remote

playback window may differ from that appeared on

the display of the unit.

r When the volume is adjusted from the unit, the value

is not reflected in the "Play to" window.

r This unit cannot play music files remotely in the

following conditions.

– It is using a network service. – It is playing a music file on a USB storage device. – "Agree" was not selected in the DISCLAIMER

screen that was displayed when the NET input was selected on the unit for the first time.

Player 12 and start playback on the

DLNA Music Streaming

8, click

Music Streaming from a Shared Folder

Music Streaming from a Shared

Folder

About Shared Folder

A shared folder is configured in a network device such as a PC or NAS (hard disk connected to your home network) for access from other users. You can play music files in a shared folder on your PC or NAS connected to the same home network as that of the unit. To play music files in a shared folder, you must first configure Windows and PC or NAS device are connected to the same router.

rThe sharing options must be configured and a shared

folder created on the PC in advance.

rFor information on how to configure the NAS device

and create a shared folder, refer to the NAS device's instruction manual.

8 or Windows® 7, Make sure the unit

Internet radio

Router

NAS

Setting PC



Configuring the Sharing Options

Select "Choose home group and sharing options" on the

"Control Panel".

r If the menu is not displayed, check whether "View

by" is set to "Category". Select "Change advanced sharing settings".

Check whether the following radio buttons are selected

in "Home or Work": "Enable network discovery" "Turn on file and printer sharing" "Turn on sharing so anyone with network access can open files" "Turn off password protected sharing" Select "Save Changes" and click "OK" on the dialog box.



Creating a Shared Folder

Select and right-click the folder to share.

Select "Properties".

Select "Advanced Sharing" on the "Sharing" tab.

Select the "Share this folder" check box and click "OK".

Select "Share" for "Network File and Folder Sharing".

Select "Everyone" from the pull-down menu. Click "Add",

and then "Share".

r To set user name and password to a shared folder,

set "Permissions" in "Advanced Sharing" on the

"Sharing" tab.

r Check whether a workgroup is set.

Playing from a Shared Folder



Playing Back

Press NET on the remote controller to display the NET

TOP screen.

r The "NET" indicator on the display stays lit. If the

With the cursors, select "Home Media", and then press

ENTER. With the cursors, select the target server, and then press

ENTER.

r You can check the server name of your PC from the

PC properties.

With the cursors, select the target shared folder, and

then press ENTER. If a username and password is required, enter the

necessary login information.

r The login information is the account information set

at the time of creating the shared folder.

r Once entered, the login information will be

remembered from the next time onward.

With the cursors, select the music file to play, and then

press ENTER or

to start playback.

Music Streaming from a Shared Folder

Using Remote Controller for

Playing Music Files

About the Remote Controller

The remote controller of this unit allows you to play music files stored on USB storage devices, Internet radio, PCs and NAS devices on your home network, as well as on Bluetooth-enabled devices. It also allows you to view information of the music file being played and perform various other operations.

rAvailable buttons may vary depending on the service

and device to play.

rSome buttons cannot be used with Bluetooth-enabled

devices. Furthermore, the Bluetooth-enabled devices must support the AVRCP profile. Some devices may not be operated, even when they support AVRCP profile.

Remote Controller Buttons

Press INPUT SELECTOR (PC, NET, USB or

BLUETOOTH) appropriate for the input source on the remote controller.

Operate the remote controller by referring to the name

and function of each of the buttons.

3 4

TOP MENU: This button displays the top menu for each media or server.

/ , ENTER: These buttons navigate through items

and activate the selected item.

/ : These buttons allow you to navigate to another

page when the list is broken across several pages.

: This button fast-reverses the current track. This button is not operable from 10 seconds before the playback ends.

: This button plays the current track from the beginning. Pressing this button twice plays the previous track.

+/-: Moves the cursor on the Internet radio stations list in "My Favorites".

MENU: This button displays the menu of each Internet radio service.

RETURN: This button returns to the previous screen.

: This button fast-forwards the current track. This button is not operable from 10 seconds before the playback ends.

: This button plays the next track.

F G

8 9

J K

Using Remote Controller for Playing Music Files

SEARCH: This button toggles between the playback screen and list screen during playback.

: This button stops the playback.

RANDOM: This button performs random playback.

REPEAT: This button replays the track(or tracks). Pressing this button repeatedly cycles through the repeat modes.

DISPLAY: This button changes the displayed track information during playback. Pressing this button when the list screen is displayed toggles the screen to playback.

rBluetooth-enabled devices: Usable buttons are

, , , , , , and .

Icons Displayed during Playback

Icons are displayed on the display during music file playback. The meaning of each icon is as follows:

: Folder

: Track

: Play

: Pause

: Fast-forward

: Fast-reverse

: Artist

: Album

: Repeat One Track

Repeat within a folder

: Repeat

: This button starts the playback.

: This button pauses the playback.

: Shuffle

Using the Listening Modes

Selecting Listening Mode

The listening modes allow you to select the best sound effect for your input source.

Press RCV on the remote controller.

r Always press RCV first to change the remote

controller to RECEIVER mode (the mode to operate this unit) since its mode may be changed to operate another component.

Select the desired mode from the four listening modes

and press the corresponding button.

r The listening mode you selected will be enabled

when you press the button. Set the listening mode of your choice by listening to the actual sound.

For details on the types and difference of listening modes, see "Effects of Listening Modes".



MOVIE/TV button

You can select a mode suitable for movies and TV programs.

rSelectable listening modes:

All Ch Stereo Direct Dolby Atmos Dolby D (Dolby Digital) Dolby D+ (Dolby Digital Plus) Dolby Surround Dolby TrueHD DSD DTS DTS 96/24 DTS Express DTS-HD HR (DTS-HD High Resolution Audio) DTS-HD MSTR (DTS-HD Master Audio) DTS Neo:6 Cinema + THX Cinema DTS Neo:6 + THX Cinema ES Discrete (DTS-ES Discrete) ES Matrix (DTS-ES Matrix) Full Mono Mono Multichannel Neo:6 Neo:6 Cinema T-D (Theater-Dimensional) THX Cinema THX I/S Cinema THX Surr EX (THX Surround EX) TV Logic



MUSIC button

You can select a mode suitable for music.

rSelectable listening modes:

All Ch Stereo Direct Dolby Atmos Dolby D (Dolby Digital) Dolby D+ (Dolby Digital Plus) Dolby Surround Dolby TrueHD DSD DTS

Using the Listening Modes

DTS 96/24 DTS Express DTS-HD HR (DTS-HD High Resolution Audio) DTS-HD MSTR (DTS-HD Master Audio) DTS Neo:6 Music + THX Music DTS Neo:6 + THX Music ES Discrete (DTS-ES Discrete) ES Matrix (DTS-ES Matrix) Full Mono Multichannel Neo:6 Neo:6 Music Orchestra Pure Audio Stereo Studio-Mix THX I/S Music THX Music Unplugged



GAME button

You can select a mode suitable for games.

rSelectable listening modes:

All Ch Stereo Direct Dolby Atmos Dolby D (Dolby Digital) Dolby D+ (Dolby Digital Plus) Dolby Surround Dolby TrueHD DSD DTS DTS 96/24 DTS Express DTS-HD HR (DTS-HD High Resolution Audio) DTS-HD MSTR (DTS-HD Master Audio) DTS Neo:6 + THX Games ES Discrete (DTS-ES Discrete) ES Matrix (DTS-ES Matrix) Full Mono Game-Action Game-Rock Game-RPG Game-Sports

Multichannel Neo:6 T-D (Theater-Dimensional) THX Games THX I/S Games



STEREO button

You can select a listening mode for stereo and all channel stereo sources.

rSelectable listening modes:

All Ch Stereo Stereo



PURE AUDIO button (on the main unit only)

(European models)

The power of the display and analog video circuit is cut off to switch the unit to Pure Audio mode and provide purer sound. Selecting this mode lights the PURE AUDIO indicator on the unit. Pressing the button again reselects the previous listening mode.

rSelecting Pure Audio for listening mode turns off the

power to the display and analog video circuitry, but the video signals input through HDMI input are output from HDMI output.

Effects of Listening Modes

Selectable listening modes will differ depending on the number of input source channels and the actual speaker configuration. Listening modes available when headphones are connected are: Pure Audio (European models), Mono, Direct, and Stereo.

Lists in alphabetic order (A-Z)



All Ch Stereo

Ideal for background music, this mode fills the entire listening area with stereo sound from the front, surround, and surround back speakers.

rInput source: MONO, STEREO, 5.1 ch, 7.1 ch



Direct

In this mode, audio from the input source is output as-is. For example, if a 2 ch source from a music CD is input, the output will be stereo, or if Dolby Digital signal is input, the sound field will be controlled in accordance with the number of channels present.

rInput source: MONO, STEREO, 5.1 ch, 7.1 ch



Dolby Atmos

Introduced first in the cinema, Dolby Atmos brings a revolutionary sense of dimension and immersion to the Home Theater experience. Dolby Atmos is an adaptable and scalable object based format that reproduces audio as independent sounds (or objects) that can be accurately positioned and move dynamically throughout the 3 dimensional listening space during playback. A key ingredient of Dolby Atmos is the introduction of a height plane of sound above the listener.

rSurround back speakers or height speakers need to be

installed.

rThis listening mode can be selected only if the input

signal is Dolby Atmos.



Dolby D

This mode is for use with Dolby Digital sources. The audio from the input source is output as-is, without surround sound processing.

rInput source: 5.1 ch rThis listening mode can be selected only if your Blu-ray

Disc/DVD player is digitally connected to the unit or the player's output setting is bitstream.

Using the Listening Modes



Dolby D+

This mode is for use with Dolby Digital Plus sources. The audio from the input source is output as-is, without surround sound processing.

rInput source: 5.1 ch, 7.1 ch rThis listening mode can be selected only if your Blu-ray

Disc/DVD player is digitally connected to the unit or the player's output setting is bitstream.

rWhen playing back 3.1 ch or 5.1 ch sources from Blu-ray

Discs, Dolby Digital is automatically applied.



Dolby Surround

Dolby surround is a next generation surround technology that intelligently up mixes stereo; 5.1 and 7.1 content for playback through your surround speaker system. Dolby surround is compatible with traditional speaker layouts, as well as Dolby Atmos enabled playback systems that employ inceiling speakers or products with Dolby speaker technology.

rInput source: STEREO, 5.1 ch or 7.1 ch



Dolby TrueHD

This mode is for use with Dolby TrueHD sources. The audio from the input source is output as-is, without surround sound processing.

rInput source: 5.1 ch, 7.1 ch rThis listening mode can be selected only if your Blu-ray

Disc/DVD player is digitally connected to the unit or the player's output setting is bitstream.



DSD

This mode is for use with DSD sources. The audio from the input source is output as-is, without surround sound processing.

rInput source: 5.1 ch rThis unit supports DSD signals input through HDMI IN.

However, depending on the connected player, better sound is possible when output from the PCM output of the player. In that case, configure the player for PCM output.

rThis listening mode can be selected only if your Blu-ray

Disc/DVD player's output setting is DSD.

Using the Listening Modes



DTS

This mode is for use with DTS sources. The audio from the input source is output as-is, without surround sound processing.

rInput source: 5.1 ch rThis listening mode can be selected only if your Blu-ray

Disc/DVD player is digitally connected to the unit or the player's output setting is bitstream.



DTS 96/24

This mode is for use with DTS 96/24 sources. The audio from the input source is output as-is, without surround sound processing. With 96 kHz sampling rate and 24-bit resolution, it provides superior fidelity.

rInput source: 5.1 ch rDepending on the settings, this listening mode becomes

DTS.

rThis listening mode can be selected only if your Blu-ray

Disc/DVD player is digitally connected to the unit or the player's output setting is bitstream.



DTS Express

This mode is for use with DTS Express sources. The audio from the input source is output as-is, without surround sound processing.

rInput source: 5.1 ch rThis listening mode can be selected only if your Blu-ray

Disc/DVD player is digitally connected to the unit or the player's output setting is bitstream.



DTS-HD HR

This mode is for use with DTS-HD High Resolution Audio sources. The audio from the input source is output as-is, without surround sound processing.

rInput source: 5.1 ch, 7.1 ch rThis listening mode can be selected only if your Blu-ray

Disc/DVD player is digitally connected to the unit or the player's output setting is bitstream.



DTS-HD MSTR

This mode is for use with DTS-HD Master Audio sources. The audio from the input source is output as-is, without surround sound processing.

rInput source: 5.1 ch, 7.1 ch rThis listening mode can be selected only if your Blu-ray

Disc/DVD player is digitally connected to the unit or the player's output setting is bitstream.



DTS Neo:6

This mode expands any 2 ch source for 5.1 ch multichannel surround playback. It offers full-bandwidth on all channels, with great independence between the channels. There are two variants for this mode: one ideal for movies and another ideal for music.

– Neo:6 Cinema: Use this mode with any 2 ch movie.

rInput source: STEREO

– Neo:6 Music: Use this mode with any 2 ch music

source.

rInput source: STEREO

– Neo:6: Use this mode to expand any 5.1 ch music

source for 6.1 ch or 7.1 ch playback using Neo:6.

rInput source: 5.1 ch rSurround back speakers need to be installed.



ES Discrete

This mode is for use with DTS-ES Discrete sources and enables 6.1 ch or 7.1 ch playback using surround back channel. Completely discrete seven channels will improve spatial imaging and enable 360-degree sound localization producing a sound crossing between the surround channels.

rInput source: 6.1 ch rSurround back speakers need to be installed. rThis listening mode can be selected only if your Blu-ray

Disc/DVD player is digitally connected to the unit or the player's output setting is bitstream.

rUse on the DVD with DTS ES logo, particularly on the

software containing DTS-ES Matrix soundtrack.

rPlayback becomes DTS if no surround back speaker is

connected.



ES Matrix

This mode is for use with DTS-ES Matrix soundtrack and enables 6.1 ch or 7.1 ch playback using matrix-encoded back channel.

rInput source: 6.1 ch rSurround back speakers need to be installed. rThis listening mode can be selected only if your Blu-ray

Disc/DVD player is digitally connected to the unit or the player's output setting is bitstream.

rUse on the CD, DVD or LD with DTS ES logo,

particularly on the software containing DTS-ES Matrix soundtrack.

rPlayback becomes DTS if no surround back speaker is

connected.



Full Mono

In this mode, all speakers output the same sound in mono, so the sound you hear is the same regardless of where you are within the listening room.

rInput source: MONO, STEREO, 5.1 ch, 7.1 ch



Game-Action

In this mode, sound localization is distinct with emphasis on bass.

rInput source: MONO, STEREO, 5.1 ch, 7.1 ch rSurround speakers need to be installed.



Game-Rock

In this mode, sound pressure is emphasized to heighten live feel.

rInput source: MONO, STEREO, 5.1 ch, 7.1 ch rSurround speakers need to be installed.



Game-RPG

In this mode, the sound has a dramatic feel with a similar atmosphere to Orchestra mode.

rInput source: MONO, STEREO, 5.1 ch, 7.1 ch rSurround speakers need to be installed.



Game-Sports

Suitable for audio source with much reverberation.

rInput source: MONO, STEREO, 5.1 ch, 7.1 ch rSurround speakers need to be installed.



Mono

Use this mode when watching an old movie with a mono soundtrack, or use it to separately reproduce soundtracks in two different languages recorded in the left and right channels of some movies. It is also suitable for DVDs or other sources containing multiplexed audio.

rInput source: MONO, STEREO, 5.1 ch, 7.1 ch



Multichannel

This mode is for use with PCM multichannel sources. The audio from the input source is output as-is, without surround sound processing.

rInput source: 5.1 ch, 7.1 ch



Orchestra

Suitable for classical or operatic music, This mode emphasizes the surround channels in order to widen the stereo image, and simulates the natural reverberation of a large hall.

rInput source: MONO, STEREO, 5.1 ch, 7.1 ch rSurround speakers need to be installed.



Pure Audio (European models)

This mode reproduces the original sound accurately. Since the audio from the input source is output without surround sound processing and the display and video circuitry are turned off, possible noise sources are minimized for a realistic audio reproduction.

rInput source: MONO, STEREO, 5.1 ch, 7.1 ch rThis mode cannot be selected when Zone 2 is

active. Activating Zone 2 when this mode is selected, automatically switches the listening mode to Direct.



Stereo

In this mode, sound is output from the front left and right speakers and subwoofer.

rInput source: MONO, STEREO, 5.1 ch, 7.1 ch



Studio-Mix

Suitable for rock or pop music, Listening to music in this mode creates a lively sound field with a powerful acoustic image, like being at a club or rock concert.

rInput source: MONO, STEREO, 5.1 ch, 7.1 ch rSurround speakers need to be installed.



T- D

In this mode, you can enjoy a virtual playback of multichannel surround sound even with only two or three speakers. This works by controlling how sounds reach the listener’s left and right ears.

rInput source: MONO, STEREO, 5.1 ch, 7.1 ch rGood results may not be possible if there is too much

reverb, so we recommend that you use this mode in an environment with little or no natural reverb.



THX

THX is a sound quality standard for movie theaters developed by Lucasfilm Limited. The standard sets up a strict quality criteria defining the level, noise, reverberation, audio equipment specifications, speaker installation positions and more details in order to enable high-fidelity audio reproduction as close as possible to the intentions of the filmmaker. There are more than 5,000 THX-certified theaters in the world and THX is considered synonymous with high acoustic quality theater.

rThe THX mode can finely adjust the acoustic and

spatial characteristics of the soundtrack for the best reproduction of home theater sound. It will work on 2 ch source and multichannel source. Surround back sound will differ depending on the source and selected listening mode.

– DTS Neo:6 Cinema + THX Cinema: The combination

mode of DTS Neo:6 Cinema and THX Cinema mode can be used. "Neo:6" and "THX" light on the unit’s display.

rInput source: STEREO rSurround speakers need to be installed.

– DTS Neo:6 Music + THX Music: The combination mode

of DTS Neo:6 Music and THX Music mode can be used. "Neo:6" and "THX" light on the unit’s display.

rInput source: STEREO rSurround speakers need to be installed.

– DTS Neo:6 + THX Cinema: The combination mode

of DTS Neo:6 and THX Cinema mode can be used.

Using the Listening Modes

"Neo:6" and "THX" light on the unit’s display.

rInput source: 5.1 ch rSurround back speakers need to be installed.

– DTS Neo:6 + THX Music: The combination mode of

DTS Neo:6 and THX Music mode can be used. "Neo:6" and "THX" light on the unit’s display.

rInput source: 5.1 ch rSurround back speakers need to be installed.

– DTS Neo:6 + THX Games: The combination mode of

DTS Neo:6 and THX Games can be used. "Neo:6" and "THX" light on the unit’s display.

rInput source: 5.1 ch rSurround back speakers need to be installed.

– THX Cinema : Use the mode in home theater

environment for playing a movie soundtrack recorded/ mixed to be played in a theater or such a large space. In this mode, THX Loudness is set to the theater level and Re-EQ, Timbre Matching, and Adaptive Decorrelation become active.

rInput source: 5.1 ch, 7.1 ch rSurround speakers need to be installed.

– THX Games : Use the mode for high-fidelity spatial

reproduction of game sound. Normally the same mixing as that for movie will be made but this mode is intended for a smaller environment. THX Loudness Plus is set to be suitable for the game sound level and Timbre Matching becomes active.

rInput source: 5.1 ch, 7.1 ch rSurround speakers need to be installed.

– THX Music : The mode is adjusted mainly for music

source mastered to be much higher quality than movie. THX Loudness Plus is set for music playback and Timbre Matching only becomes active.

rInput source: 5.1 ch, 7.1 ch rSurround speakers need to be installed.

– THX I/S Cinema : This mode expands 5.1-channel

sources for 7.1- channel playback. It does this by analyzing the composition of the surround source, optimizing the ambient and directional sounds to produce the surround back channel output.

rInput source: 5.1 ch

rSurround back speakers need to be installed.

– THX I/S Games : This mode is designed for use with

video games. It can expand 5.1-channel sources for

6.1/7.1-channel playback. rInput source: 5.1 ch rSurround back speakers need to be installed.

– THX I/S Music : This mode is designed for use with

music. It expands 5.1-channel sources for 7.1-channel playback.

rInput source: 5.1 ch rSurround back speakers need to be installed.

– THX Surr EX : The format for home theaters was co-

developed by Dolby Laboratories and THX Limited. The Dolby Digital EX technology produces 7.1 channels in total by creating a new sound field behind the listener in addition to the conventional channels of front L/R. center, surround L/R and subwoofer.

rInput source: 5.1 ch rSurround back speakers need to be installed.



TV Logic

Suitable for TV shows produced in a TV studio, This mode enhances the surround effects to the entire sound to give clarity to voices and create a realistic acoustic image.

rInput source: MONO, STEREO, 5.1 ch, 7.1 ch rSurround speakers need to be installed.



Unplugged

Suitable for acoustic instruments, vocals and jazz, This mode emphasizes the front stereo image, giving the impression of being right in front of the stage.

rInput source: MONO, STEREO, 5.1 ch, 7.1 ch rSurround speakers need to be installed.



Information

Dialog Normalization

Dialog Normalization (DialogNorm) is one of the Dolby Digital features that can stabilize the average volume level between the Dolby Digital, Dolby Digital Plus and Dolby TrueHD sources, eliminating the need to adjust the volume for each user or source. "DialogNorm: X dB" ("X" is a numerical value) may appear on the unit display

when a Dolby Digital, Dolby Digital Plus or Dolby TrueHD source is played. It indicates the relation between the source's volume level and the THX standard level. If you want to play the recorded source in theater level, adjust the volume. For example, if "DialogNorm: +4 dB" appears on the display, the source being played is recorded with 4 dB plus the THX standard level. If you play it in the THX standard level, lower the volume by 4dB. However, not as in the theater where the playback volume is prefixed, the unit allows you to adjust the volume to your favorite level.

THX Cinema Processing

THX is a sound quality standard for movie theaters developed by Lucasfilm Limited with the aim of reproducing high-fidelity audio as close as possible to the intentions of the filmmaker. A movie soundtrack is mixed in special theater called dubbing stage on the assumption that the soundtrack is played in such theaters with similar equipment and conditions. The movie soundtrack is also recorded on a Blu-ray disc and DVD, but not optimized for home theater environment. THX engineers developed the technology, now patentprotected, to reproduce the theater sound in home theater environment by minimizing acoustic and spatial deviation that occurs in home theater environment. On this unit, the THX functions are automatically added to the Cinema mode when THX is on. (Example: THX Cinema, THX Surround EX)

Timbre Matching

The human ears perception differs depending on the sound coming direction. Although movie theaters have many surround speakers to surround the room with sound, home theaters have only two surround speakers. The Timbre Matching function filters the signals sent to the surround speakers and adjusts the tonal characteristics of front speakers and surround speakers to create smooth sound movement from front speakers to surround speakers.

Adaptive Decorrelation

Although movie theaters have many surround speakers to surround the room with sound, home theaters normally have only two surround speakers. Such two surround speakers give a headphone-like sound, not

Using the Listening Modes

a broad and embracing surround sound. If the listener moves away from the middle of the surround speakers, sound from the surround speakers mixes with that from the near speakers and cannot be distinguished any more. Adaptive Decorrelation slightly changes the time axis and phase between the surround channels. In this way, the listener can stay in a wider listening position and enjoy theater-like sound with two surround speakers.

ASA (Advanced Speaker Array)

ASA is a technology patented by THX to provide a broad surround sound experience by processing the side and back surround speaker sounds respectively. When making home theater setting with eight speakers (front L, center, front R, surround R, surround R back, surround L back, surround L, and subwoofer), be sure to select the distance between the relative surround back speakers in the THX audio setting screen. This procedure optimizes again the surround sound environment. ASA is used in three modes: THX I/S Cinema, THX I/S Music and THX I/S Games.

Checking the Input Format

You can check the audio format of the input signals. While audio from the player is being input, press DISPLAY on the remote controller several times to switch the information shown on the main unit display. If "Dolby D 5.1" is displayed in Signal format, the Dolby Digital 5.1 ch signals are being input.

rThe number of channels is not displayed when the input

format is "Dolby Atmos".

Advanced Settings

How to Set

The unit allows you to configure advanced settings, such as to remap the input and input selector, or configure various speaker settings in order to provide even better experience. Make the settings in "Setup" of the HOME menu.



Operation

Press RCV on the remote controller.

r Always press RCV first to change the remote

controller to RECEIVER mode (the mode to operate this unit) since its mode may be changed to operate another component.

Press HOME to display the HOME menu.

Select "Setup" with the cursors / and press ENTER.

HOME

Advanced Settings

Press / to select the desired menu, and then press

ENTER.

SETUP

With the / / / cursors, select the desired item to

configure the settings.

r When "ENTER" is displayed on the setting item,

press ENTER.

1-1. Monitor Out

Monitor Out

Resolution

1. Input/Output Assign

1. Monitor Out

2. HDMI Input

3. Component Video Input

4. Composite Video Input

5. Digital Audio Input

MAIN

Through

Setup

Select which HDMI output you connected to TV. HDCP 2. 2 is available for MAIN output.

To save the changes and exit the setup menu, press HOME.

Advanced Settings

1. Input/Output Assign

Monitor Out

The video input signals input to the unit will be converted when they are output from the HDMI OUT jack to the TV so that their resolution can match that of the TV used.

Setting Item Default Value Setting Details

Monitor Out MAIN Select the HDMI jack to be connected with the

TV. "MAIN": When connecting the TV to the HDMI OUT MAIN jack "SUB": When connecting the TV to the HDMI OUT SUB jack

rThe resolution of the input signal does not

change when output through HDMI OUT

SUB jack. "MAIN+SUB": When connecting to both the MAIN and SUB jacks

rVideo signals input to the composite video

input jack or the COMPONENT VIDEO input

jacks will be upconverted to HDMI signals

and then output from the HDMI output jack.

rIf "MAIN+SUB" is selected

– Only "Through" or "Auto" can be selected

in "Resolution".

– The resolution of the input signal does not

change when output through HDMI OUT SUB jack.

rThe HDMI jack of this unit is compliant with

HDCP2.2 (HDMI OUT MAIN and HDMI IN3

jacks only).

Setting Item Default Value Setting Details

Resolution Through Specify the output resolution of the HDMI OUT

jacks. The image resolution of the unit will be converted so that it can match the resolution supported by the TV used. "Through": The output resolution is not converted and will be the same as that of the input signals. "Auto": The resolution will automatically be converted according to the resolution supported by the TV. "480p (480p/576p)", "720p", "1680×720p", "1080i", "1080p" or "2560×1080p": Select the desired resolution. "4K": About four times as high resolution as 1080p (3840×2160 or 4096×2160 pixels depending on the resolution supported by the connected TV)

rIf "1080p" is selected, 1080p/24 input signals

will be output with an unchanged resolution.

rIf the monitor does not support the selected

resolution, the image will be displayed with the same resolution as that of the input signal.

rIf "4K" is selected, video signals may not be

output to some types of TV. For details, see "Resolution supported by HDMI OUT MAIN/ SUB jack" in "Reference Information".

rIf "Monitor Out" is set to "SUB", this setting

will be set to "Through".

rYou can check the video on the TV while

making this setting. Select the value with the cursors and press ENTER. Press RETURN if no video is displayed. (except when "NET", "USB" or "BLUETOOTH" is selected)

Advanced Settings

HDMI Input

You can change input assignment between the input selectors and HDMI IN jacks.

Setting Item Default Value Setting Details

BD/DVD HDMI 1 "HDMI 1" to "HDMI 6": Assign a desired HDMI

IN jack to the BD/DVD button. If you do not assign a jack, select "-----". To select an HDMI IN jack already assigned to another input selector, change its setting to "-----" first.

CBL/SAT HDMI 2 "HDMI 1" to "HDMI 6": Assign a desired HDMI

IN jack to the CBL/SAT button. If you do not assign a jack, select "-----". To select an HDMI IN jack already assigned to another input selector, change its setting to "-----" first.

STB/DVR HDMI 3

(HDCP 2.2)

GAME HDMI 4 "HDMI 1" to "HDMI 6": Assign a desired HDMI

PC HDMI 5 "HDMI 1" to "HDMI 6": Assign a desired HDMI IN

AUX Front/MHL The setting cannot be changed.

TV/CD ----- "HDMI 1" to "HDMI 6": Assign a desired HDMI

PHONO ----- "HDMI 1" to "HDMI 6": Assign a desired HDMI

"HDMI 1" to "HDMI 6": Assign a desired HDMI IN jack to the STB/DVR button. If you do not assign a jack, select "-----". To select an HDMI IN jack already assigned to another input selector, change its setting to "-----" first.

IN jack to the GAME button. If you do not assign a jack, select "-----". To select an HDMI IN jack already assigned to another input selector, change its setting to "-----" first.

jack to the PC button. If you do not assign a jack, select "-----". To select an HDMI IN jack already assigned to another input selector, change its setting to "-----" first.

IN jack to the TV/CD button. If you do not assign a jack, select "-----". To select an HDMI IN jack already assigned to another input selector, change its setting to "-----" first.

IN jack to the PHONO button. If you do not assign a jack, select "-----". To select an HDMI IN jack already assigned to another input selector, change its setting to "-----" first.

Component Video Input

The CBL/SAT button is preset to play the player connected to the COMPONENT VIDEO IN jacks. This assignment can be changed if necessary. If you do not assign a jack, select "-----".

Setting Item Default Value Setting Details

BD/DVD ----- "COMPONENT": Assign the COMPONENT

VIDEO IN jacks to the BD/DVD button.

CBL/SAT COMPONENT "COMPONENT": Assign the COMPONENT

VIDEO IN jacks to the CBL/SAT button.

STB/DVR ----- "COMPONENT": Assign the COMPONENT

VIDEO IN jacks to the STB/DVR button.

GAME ----- "COMPONENT": Assign the COMPONENT

VIDEO IN jacks to the GAME button.

PC ----- "COMPONENT": Assign the COMPONENT

VIDEO IN jacks to the PC button.

AUX ----- The setting cannot be changed.

TV/CD ----- "COMPONENT": Assign the COMPONENT

VIDEO IN jacks to the TV/CD button.

PHONO ----- "COMPONENT": Assign the COMPONENT

VIDEO IN jacks to the PHONO button.

rWhen you convert video signals input to the COMPONENT VIDEO IN jacks and output them from

the HDMI OUT jack, set the output resolution of the player to 480i. If the input has 480p or higher resolution, an error message will appear.

rWhen "1. Input/Output Assign" - "Monitor Out" - "Monitor Out" is set to "SUB", the 480i/576i

component signals only will be output with an unchanged resolution. Video will not be displayed if the TV does not support the resolution.

rWhen "1. Input/Output Assign" - "Monitor Out" - "Monitor Out" is set to "MAIN" or "MAIN+SUB" and

"Resolution" is set to "Through", the 480i/576i component signals will be output with an unchanged resolution. Video will not be displayed if the TV does not support the resolution.

Advanced Settings

Composite Video Input

You can change input assignment between the input selectors and COMPOSITE VIDEO IN V1 to 3 jacks.

Setting Item Default Value Setting Details

BD/DVD ----- "VIDEOI 1" to "VIDEO 3": Assign a desired

COMPOSITE VIDEO IN V jack to the BD/DVD button. If you do not assign a jack, select "-----".

CBL/SAT VIDEO 1 "VIDEOI 1" to "VIDEO 3": Assign a desired

COMPOSITE VIDEO IN V jack to the CBL/SAT button. If you do not assign a jack, select "-----".

STB/DVR VIDEO 2 "VIDEOI 1" to "VIDEO 3": Assign a desired

COMPOSITE VIDEO IN V jack to the STB/DVR button. If you do not assign a jack, select "-----".

GAME VIDEO 3 "VIDEOI 1" to "VIDEO 3": Assign a desired

COMPOSITE VIDEO IN V jack to the GAME button. If you do not assign a jack, select "-----".

PC ----- "VIDEOI 1" to "VIDEO 3": Assign a desired

COMPOSITE VIDEO IN V jack to the PC button. If you do not assign a jack, select "-----".

AUX ----- The setting cannot be changed.

TV/CD ----- "VIDEOI 1" to "VIDEO 3": Assign a desired

COMPOSITE VIDEO IN V jack to the TV/CD button. If you do not assign a jack, select "-----".

PHONO ----- "VIDEOI 1" to "VIDEO 3": Assign a desired

COMPOSITE VIDEO IN V jack to the PHONO button. If you do not assign a jack, select "-----".

Digital Audio Input

You can change input assignment between the input selectors and DIGITAL IN COAXIAL 1 to 2/OPTICAL jacks.

Setting Item Default Value Setting Details

BD/DVD COAXIAL 1 "COAXIAL 1", "COAXIAL 2", "OPTICAL": Assign a

desired DIGITAL IN jack to the BD/DVD button. If you do not assign a jack, select "-----".

CBL/SAT COAXIAL 2 "COAXIAL 1", "COAXIAL 2", "OPTICAL": Assign a

desired DIGITAL IN jack to the CBL/SAT button. If you do not assign a jack, select "-----".

STB/DVR ----- "COAXIAL 1", "COAXIAL 2", "OPTICAL": Assign a

desired DIGITAL IN jack to the STB/DVR button. If you do not assign a jack, select "-----".

GAME ----- "COAXIAL 1", "COAXIAL 2", "OPTICAL": Assign a

desired DIGITAL IN jack to the GAME button. If you do not assign a jack, select "-----".

PC ----- "COAXIAL 1", "COAXIAL 2", "OPTICAL": Assign a

desired DIGITAL IN jack to the PC button. If you do not assign a jack, select "-----".

AUX ----- The setting cannot be changed.

TV/CD OPTICAL "COAXIAL 1", "COAXIAL 2", "OPTICAL": Assign a

desired DIGITAL IN jack to the TV/CD button. If you do not assign a jack, select "-----".

PHONO ----- "COAXIAL 1", "COAXIAL 2", "OPTICAL": Assign a

desired DIGITAL IN jack to the PHONO button. If you do not assign a jack, select "-----".

rWhen "1. Input/Output Assign" - "Monitor Out" - "Monitor Out" is set to "SUB", the 480i/576i

component signals only will be output with an unchanged resolution. Video will not be displayed if the TV does not support the resolution.

rWhen "1. Input/Output Assign" - "Monitor Out" - "Monitor Out" is set to "MAIN" or "MAIN+SUB" and

"Resolution" is set to "Through", the 480i/576i composite signals will be output with their resolution unchanged. Video will not be displayed if the TV does not support the resolution.

rSupported sampling rates for PCM signals (stereo, mono) from a digital input are 32 kHz/44.1 kHz/

|M*\M*\M*\DKVDKVDKV.

Advanced Settings

2. Speaker Setup

Allows you to change the speaker configuration such as presence or not of subwoofer, distance of speakers and so on. Settings are automatically configured if you use the Automatic Speaker Setup. This setting cannot be selected if headphones are connected or audio is output from the speakers of the TV.

Speaker Settings

Change the impedance of the connected speakers, the type of front speaker connection, and height speaker type.

Setting Item Default Value Setting Details

Speaker Impedance (European model)

Front Speakers Type

Height Speakers Type

Powered Zone 2 No Set the connection of speakers to Zone 2 speaker

rFor impedance, check the indications on the back of the speakers or their instruction manual.

6ohms Set the impedance of the connected speakers.

"4ohms": When any of the connected speakers have

ŝQTOQTGVQNGUUVJCPŝKORGFCPEG QJOU9JGPVJGEQPPGEVGFURGCMGTUCNNJCXGŝ

or more impedance

Normal The type of front speaker connection is fixed to

"Normal". The setting cannot be changed.

Not Use Set the speaker type if height speakers are

connected to the SPEAKERS BACK or HEIGHT terminals. Select from the following options according to the type and layout of the connected speakers: "Not Use", "Front High", "Top Front", "Top Middle", "Dolby Enabled Speaker (Front)" or "Dolby Enabled Speaker (Surround)".

r"Dolby Enabled Speaker (Surround)" cannot be

selected if "Speaker Configuration" - "Surround" is set to "None".

terminals. "Yes": When speakers are connected to Zone 2 speaker terminals "No": When speakers are not connected to Zone 2 speaker terminals

Speaker Configuration

Allows you to change the speaker configuration such as presence or not of each speaker and so on. Settings are automatically configured if you use the Automatic Speaker Setup. Audio will not be output while you are making this setting.

Setting Item Default Value Setting Details

Subwoofer Yes Set whether a subwoofer is connected or not.

"Yes": When subwoofer is connected "No": When subwoofer is not connected

Front Yes The front speaker setting is fixed to "Yes". The

setting cannot be changed.

rIf "Subwoofer" is set to "No", the bass

frequencies of the other channels will be output from the front speakers.

Center Yes Set whether the center speaker is connected or not.

"Yes": When the center speaker is connected "No": When the center speaker is not connected

Surround Yes Set whether the surround speaker is connected or

not. "Yes": When the surround speaker is connected "No": When the surround speaker is not connected

Back Yes Set whether the surround back speaker is connected

or not. "Yes": When the surround back speaker is connected "No": When the surround back speaker is not connected

rIn any of the following cases, the setting will be

set to "No".

– "Surround" is set to "No". – Any type is selected in "Speaker Settings" -

"Height Speakers Type".

– "Speaker Settings" - "Powered Zone 2" is set

to "Yes" and also Zone2 is set to on.

Back ch 2ch Select the number of channels of the connected

surround back speaker. "1ch": When one speaker is connected (Connect to the BACK or HEIGHT L terminal) "2ch": When two speakers are connected

rThe setting cannot be changed if "Back" is set to

"No".

Advanced Settings

Setting Item Default Value Setting Details

Height No rIf "Speaker Settings" - "Height Speakers Type" is

set to "Not Use", this setting will be set to "No".

rIf any type is selected in "Speaker Settings" -

"Height Speakers Type", this setting will be set to "Yes".

rIf "Speaker Settings" - "Powered Zone 2" is set to

"Yes" and also Zone2 is set to on, this setting will be set to "No".

Speaker Distance

Set the distance from each speaker to the listening position. Settings are automatically configured if you use the automatic speaker setup.

Setting Item Default Value Setting Details

Unit feet/meters Specify the unit of distance for configuring

settings. "feet": When setting in feet (0.1ft to 30.0ft, in increments of 0.1ft) "meters": When setting in meters (0.03m to

9.00m, in increments of 0.03m)

Front Left 12.0ft/3.60m Specify the distance between each speaker and

the listening position.

Center 12.0ft/3.60m Specify the distance between each speaker and

the listening position.

Front Right 12.0ft/3.60m Specify the distance between each speaker and

the listening position.

Surround Right 7.0ft/2.10m Specify the distance between each speaker and

the listening position.

Back Right 7.0ft/2.10m Specify the distance between each speaker and

the listening position.

rThe setting is not displayed if "Speaker

Configuration" - "Back" is set to "Yes" and also "Back ch" is set to "1ch".

rThe setting cannot be changed if any type

is selected in "Speaker Settings" - "Height Speakers Type".

rThe setting cannot be changed if "Speaker

Settings" - "Powered Zone 2" is set to "Yes" and also Zone2 is set to on.

Setting Item Default Value Setting Details

Back Left 7.0ft/2.10m Specify the distance between each speaker and

the listening position.

rThe setting is not displayed if "Speaker

Configuration" - "Back" is set to "Yes" and also "Back ch" is set to "1ch".

rThe setting cannot be changed if any type

is selected in "Speaker Settings" - "Height Speakers Type".

rThe setting cannot be changed if "Speaker

Settings" - "Powered Zone 2" is set to "Yes" and also Zone2 is set to on.

Back 7.0ft/2.10m Specify the distance between each speaker and

the listening position.

rThe setting is displayed only if "Speaker

Configuration" - "Back" is set to "Yes" and also "Back ch" is set to "1ch".

rThe setting cannot be changed if any type

is selected in "Speaker Settings" - "Height Speakers Type".

rThe setting cannot be changed if "Speaker

Settings" - "Powered Zone 2" is set to "Yes" and also Zone2 is set to on.

Surround Left 7.0ft/2.10m Specify the distance between each speaker and

the listening position.

Subwoofer 12.0ft/3.60m Specify the distance between each speaker and

the listening position.

Height Left 9.0ft/2.70m Specify the distance between each speaker and

the listening position.

rThis setting cannot be changed in any of the

following cases.

– "Speaker Settings" - "Height Speakers

Type" is set to "Not Use".

– "Speaker Settings" - "Powered Zone 2" is

set to "Yes" and also Zone2 is set to on.

Height Right 9.0ft/2.70m Specify the distance between each speaker and

the listening position.

rThis setting cannot be changed in any of the

following cases.

– "Speaker Settings" - "Height Speakers

Type" is set to "Not Use".

– "Speaker Settings" - "Powered Zone 2" is

set to "Yes" and also Zone2 is set to on.

rWhen the speaker is set to "No" in "Speaker Configuration", the settings for "Speaker Distance"

cannot be changed.

rDefault values vary depending on the regions.

Level Calibration

Adjust the level of each speaker with the built-in test tone. Settings are automatically configured if you use the Automatic Speaker Setup.

Setting Item Default Value Setting Details

Front Left 0dB Select a value between "-12dB" to "+12dB". A

test tone will be output each time you change the value. Select the desired level.

Center 0dB Select a value between "-12dB" to "+12dB". A

test tone will be output each time you change the value. Select the desired level.

Front Right 0dB Select a value between "-12dB" to "+12dB". A

test tone will be output each time you change the value. Select the desired level.

Surround Right 0dB Select a value between "-12dB" to "+12dB". A

test tone will be output each time you change the value. Select the desired level.

Back Right 0dB Select a value between "-12dB" to "+12dB". A

test tone will be output each time you change the value. Select the desired level.

rThe setting is not displayed if "Speaker

Configuration" - "Back" is set to "Yes" and

also "Back ch" is set to "1ch".

rThe setting cannot be changed if any type

is selected in "Speaker Settings" - "Height

Speakers Type".

rThe setting cannot be changed if "Speaker

Settings" - "Powered Zone 2" is set to "Yes"

and also Zone2 is set to on.

Advanced Settings

Setting Item Default Value Setting Details

Back Left 0dB Select a value between "-12dB" to "+12dB". A

test tone will be output each time you change the value. Select the desired level.

rThe setting is not displayed if "Speaker

Configuration" - "Back" is set to "Yes" and also "Back ch" is set to "1ch".

rThe setting cannot be changed if any type

is selected in "Speaker Settings" - "Height Speakers Type".

rThe setting cannot be changed if "Speaker

Settings" - "Powered Zone 2" is set to "Yes" and also Zone2 is set to on.

Back 0dB Select a value between "-12dB" to "+12dB". A

test tone will be output each time you change the value. Select the desired level.

rThe setting is displayed only if "Speaker

Configuration" - "Back" is set to "Yes" and also "Back ch" is set to "1ch".

rThe setting cannot be changed if any type

is selected in "Speaker Settings" - "Height Speakers Type".

rThe setting cannot be changed if "Speaker

Settings" - "Powered Zone 2" is set to "Yes" and also Zone2 is set to on.

Surround Left 0dB Select a value between "-12dB" to "+12dB". A

test tone will be output each time you change the value. Select the desired level.

Subwoofer 0dB Select a value between "-15dB" to "+12dB". A

test tone will be output each time you change the value. Select the desired level.

Height Left 0dB Select a value between "-12dB" to "+12dB". A

test tone will be output each time you change the value. Select the desired level.

rThis setting cannot be changed in any of the

following cases.

– "Speaker Settings" - "Height Speakers

Type" is set to "Not Use".

– "Speaker Settings" - "Powered Zone 2" is

set to "Yes" and also Zone2 is set to on.

+ 63 hidden pages