B SET UP BY CODE
I
f your brand is not listed in section A, you can set up your device by trying codes individually.
To do this:
1. T
urn your device on (not on standby).
2. Locate the brand of your device in the code list (pages 74-77). Codes are
listed by Device Type.
3. Hold down MAGIC until the LED blinks twice.
4. E
nter the rst 4 digit code listed for your brand (e.g. 0556 for a Bennett
T
V).
5. The LED will blink twice and go out.
6. Now aim the remote towards your device and press the POWER key.
7. If the device turns off, your remote is ready to use. If not, repeat steps 3-6 with the next code
in the list.
• Some codes are quite similar. If you nd that one or more keys do not operate as you expect,
try again from step 3 with the next code in the list.
HOW TO SET UP YOUR REMOTE LEARNING
Y
our One For All remote control can learn any function from any other working remote control.
T
his can be useful if you are missing one or more functions from your original remote control and
would like to add them to the ONE FOR ALL.
You can also learn a complete device if you can’t nd a code.
T
o learn, rstly make sure you have all your original remote controls to hand, and that they have
w
orking batteries in. To learn functions, the original remote should be approximately 3cm from
the OFA remote, pointing towards it as shown below:
1. Hold down MAGIC until the LED blinks twice.
2. P
ress 975 – the LED will blink twice.
3. Press and release the key you want to learn a function onto (for example
the 3D key) – The red LED will blink continuously.
4. Press and release the key on the original remote.
5. The LED will blink twice to indicate the key has been learned correctly.
6. Repeat steps 3 and 4 for each key you want to learn – remember you can learn from multiple
remotes, but only one function per key.
7. When you learned all the functions you require, press and hold the
MAGIC key until the LED blinks twice and turns off.
HINTS
• If the LED shows one long blink at step 5, the function was not learned correctly,
please try again from step 3.
• If you nd one or more keys don’t work properly after set up, you can re-enter the learning
mode at any time by repeating the procedure from step 1.
TO DELETE A LEARNED FUNCTION, THE PROCEDURE IS:
1. Hold down MAGIC until the LED blinks twice.
2. Press 976 – the LED will blink twice
3. Press the key to delete twice – the LED will blink twice.
Repeat the above procedure for each key you want to delete.
PRODUCT DISPOSAL
The crossed out wheeled bin symbol on this product ensures that this product is manufactured
u
sing high quality components that can be recycled and reused according to European Directive
2002/96/EC. Please do not dispose this product with your normal household waste but inform yourself about the local separate collection for electrical and electronic products to dispose this product
correctly. This will help preventing potential negative effects on the environment and/or human
health.
BATTERY DISPOSAL and safety
Please do not dispose your batteries with your normal household waste but inform yourself about
the local separate collection for empty batteries to dispose them correctly. This will help preventing
potential negative effects on the environment and/or human health.Keep batteries away from re,
out of direct sunlight, and away from other sources of heat.
UNIVERSAL ELECTRONICS INC/ONE FOR ALL warrants to the original purchaser that this product
will be free from defects in materials and workmanship under normal and correct use for a period
of one (1) year from the date of original purchase. This product will be replaced free of charge if it
has been proven to be defective within the one (1) year warranty period. This warranty does not
cover cartons, carrying cases, batteries, broken or marred cabinets or any other item used in connection with the product. Any further obligation than listed above is excluded. Please notice that
we need your purchase receipt so that we may establish your eligibility for service. If you have
bought this product for purposes which are not related to your trade, business or profession, please
remember that you may have legal rights under your national legislation governing the sale of consumer goods. This guarantee does not affect those rights.
Universal Electronics BV
Europe & International
Colosseum 2, 7521 PT Enschede
The Netherlands
URC7115
710797
RDN-1020616
UK
www.oneforall.com
Ireland
www.oneforall.com
South Africa
0861100551
support@oneforall.co.za
www.connoisseur.co.za
www.oneforall.com
New Zealand
0800 1425569
sales@amber.co.nz
www.amber.co.nz
www.oneforall.com
Australia
1 300 888 298
ofa.support@ambertech.com.au
www.ambertech.com.au
www.oneforall.com