• Key Magic®
llows you to obtain functions
A
rom your LOST or BROKEN
f
original remote control.
page 2
h
s
i
l
g
n
E
Missing function after
Set Up procedure
Extra features URC-7110
btain your Missing function through
O
our Customer Service requesting a
(5-digit) Key Magic® function code.
Then, simply follow the procedure
rom page 2.
f
• Macro
Allows you to send a sequence
of commands with the press
of a single key.
page 3
e.g.
Original
LOST
r
o
ROKEN
B
remote
e.g. Macro on “-/-- key”
K
e
y
M
a
g
i
c
®
EXT 2
1
2
Com
m
and
Com
3
m
and
Com
m
and
Macro on “-/-- key” =
command 1: TV ON
command 2: AV (EXT 1)
command 3: AV (EXT 2)
• What is my
“Set Up Code again?
Find out which code is currently
set under each of the 6 device
modes.
page 4
My Code is?
1 5 5 6
1 blink
5 blinks
5 blinks
6 blinks
1st nr. : 1
2nd nr. : 5
3rd nr. : 5
4th nr. : 6
Key Magic®
ey Magic® is an exclusive ONE FOR ALL feature. The design of the ONE FOR ALL ensures that many functions of your original remote control can be operated - even those that do not have
K
heir own key on the ONE FOR ALL keypad. Frequently used functions can be assigned to a key of your choice using the Key Magic® feature of your ONE FOR ALL. In order to program a certain
t
function with Key Magic® you need to know the corresponding function code. As the function codes vary with different types of devices, they cannot be found in the manual. You can request
our function codes through our consumer service help-line or by letter, fax or e-mail.
y
hen you contact us please make sure to mention the following:
W
• The Current code you are using (see “What is my Set Up Code again?” )
Device-type, Brand & Model-number of the corresponding device.
•
Model-number of the original LOST or BROKEN remote control.
•
• How the function was labeled on your original remote control.
then;
Customer Service will provide you:
• A function-code (5-digit) for every requested function.
Once you obtain your function code(s) from customer service, programming
he code is easy:
t
xample: How to get the “I/II (mono/stereo)“ function from your original LOST or
E
BROKEN remote onto the “red key” on your ONE FOR ALL remote control.
2
3
4
ress 9 9 4.
P
P
the magic key.
-> The blue LED will blink twice.
-
ress and release
Enter the 5-digit function-code provided by Customer Service.
e.g. 00123)
(
x2
5
K
e.g.
Original
LOST
or
BROKEN
remote
ey Ma
gi
c
®
Press the key to which the function will
be assigned (e.g. red key).
Congratulations! You have successfully programmed the “I/II (mono/streo)”
function from your original remote control onto your ONE FOR ALL remote
control. NOW whenever you press the “red key” (in tv mode) you will obtain the
“I/II (mono/streo)” function.
--> The blue LED will blink twice.
1
3 sec.
Press and hold magic for 3 seconds until a mode indicator (Blue LED) stays lit.
How to reset a key to obtain its original function?
1) Select the corresponding device mode (e.g. tv).
2) Press and hold magic for 3 seconds until a mode indicator (Blue LED)
stays lit.
3) Press 9 9 4.
4) Press the corresponding key (e.g. red) twice.
2
Macro
ou can program your ONE FOR ALL to issue a sequence of commands at the press of one single key. Any sequence of commands you regularly use can be reduced to one key press for
Y
our convenience.
y
For example, you may want to create a macro that will switch ON your TV and then go dirtectly to
XT 2 for your Playstation.
E
1st command: TV --> POWER (ON)
Ext.1:
Digital
Receiver Box
2nd command: AV --> EXT 1 (Digital Receiver Box)
nd command: AV --> EXT 2 (Playstation)
3
To set up the Macro mentioned above on the e.g. “-/--” key on your ONE FOR ALL:
Ext.2:
Playstation
1
6
3 sec.
ress and hold magic for 3 seconds until a mode indicator (Blue LED) stays lit.
P
2
Press 9 9 5.
--> The blue LED will blink twice.
3
Press the key to which
the function will be
assigned (e.g. -/-- key).
3 sec.
Press and hold magic for 3 seconds --> The blue LED will blink twice and then switch off.
Congratulations! You have successfully programmed a macro on the “-/--” key.
OW, when you press the -/-- key:
N
1st: the TV will switch ON.
nd: the TV will switch to EXT 1
2
rd: the TV will switch to EXT 2.
3
The remote will do this in every device mode whenever you press the “-/--” key.
x2
EXT 2
1
nd
a
m
m
nd 2
o
a
C
m
nd 3
m
a
o
C
m
m
o
Press the -/-- key
C
Command 1: TV ON
Command 2: AV (Ext.1)
Command 3: AV (Ext.2)
4
Press the POWER key
5
Press the AV key twice (as you
would to go to EXT 2)
x2
How to reset the macro key to obtain its original function?
1) Press and hold magic for 3 seconds until a mode indicator (Blue LED)
stays lit.
2) Press 9 9 5.
3) Press the corresponding macro key (e.g. the -/-- key).
4) Press and hold magic key for 3 sec. --> The blue LED will blink twice.
3
What is my “Set Up Code” again?
ou either set up your ONE FOR ALL by:
Y
• ONE FOR ALL SimpleSet
Direct Code Set Up
•
Search Method
•
xample! How to find out which “Set Up Code” is currently set in tv mode:
E
1
sec.
3
ress and hold magic for 3 seconds until a mode indicator (Blue LED) stays lit.
P
2
-> The blue LED will blink twice.
Press 9 9 0.
-
3
Press 1 for the 1st digit of your 4-digit set up code and count how many times the
LED blinks. If the LED does not blink, the digit is “0”.
Your “Set Up Codes” :
x2
?
?
4
??
Press 2 for the 1st digit of your 4-digit set up code and count how many times the
LED blinks. If the LED does not blink, the digit is “0”.
5
??
Press 3 for the 1st digit of your 4-digit set up code and count how many times the
LED blinks. If the LED does not blink, the digit is “0”.
6
??
Press 4 for the 1st digit of your 4-digit set up code and count how many times the
LED blinks. If the LED does not blink, the digit is “0”.
Congratulations! You have successfully blinked out your current Set Up Code in tv
mode.
Operational Reset
The Operational reset will erase all learned functions across all modes and some
other programmed functions like Key Magic and Macros.
1) Press and hold magic for 3 seconds until a mode indicator (Blue LED)
stays lit.
2) Press 9 8 0. The blue LED will blink twice.
4
Loading...