Your ONE FOR ALL 4 needs 4 new “AAA/LR6” alkaline batteries.
1Press “Battery Unlock” to unlock the battery
2 Match the batteries to the + and - marks inside the battery case, then
insert the batteries.
3 Place the battery cover back into place.
cover from the back of your ONE FOR ALL 4.
The Keypad
1 To switch off your equipment
2 To set up your ONE FOR ALL 4.
3 Back-light On/Off
4 To switch on your equipment
5 Device keys with mode indication
6 Number Keys
Additionaly the MAGIC key may be used as SHIFT key.
During operation of the ONE FOR ALL the red LED
(Light Emitting Diode) underneath a device key will
light up every time a key is pressed to indicate the
device mode you are using.
Television / LCD / Plasma / Projector / Rear Projector
DVD Player / DVD-R / DVD Home Cinema / DVD Combi /
DVD/HDD, Video Cassette Recorder / TV/VCR Combi /
DVD/VCR Combi
Satellite Receiver, DVB-T, Cable Converter, DSS / Video
Accessory (e.g. Media Centres), Personal Video Recorder,
Hard Disc Recorder
Audio / Audio Receiver/Tuner/Amplifier / (DVD) Home
Cinema
If your original remote has an 20 key, this function
can be found under the AV key.
If your original remote has an 10 or -/-- key,
this function can be found under the -/-- key.
In AMP mode : Input Select keys
TUNTV
DVDSAT/CBL
CDTape
VideoAudio
AUX6CH/5,1
WW W.ON EFORA LL.C O M5
7 In TV mode : AV/Input or 20 or C/P
In SAT mode : TV/SAT” or TV/DTV
In DVD mode : TV/DVD or 20
In AMP mode : Function Select or Input Source
8 Volume +/- and Mute Keys
9 Menu
10 Exit the Menu
11 Channel +/- Keys
12 to navigate in Menu operation and confirm your
13 In TV, SAT and/or DVD mode : Guide
14 In TV and/or SAT mode : Recall
RECALL
If the device you programmed does not have
volume functionality, you will obtain the VOL +/- and
Mute functionality from your Television.
In TV mode := Colour +/-
In TV mode := Brightness +/-
choice pressing the OK key
In AMP mode : DSP
In DVD and/or AMP mode : Rewind
In SAT mode : = Rewind
15 In TV mode : = 16:9
16:9
16 In TV and/or SAT mode : Info or OSD
INFO
17 In TV and/or SAT mode : PIP
PIP
In SAT mode : = Options
In DVD and/
or AMP mode : = Play
In SAT mode : = Play
In DVD and AMP mode : Pauze
In SAT mode : = Pauze
In DVD and AMP mode : Fast Forward
In SAT mode : = Fast Forward
6WW W.ON EFORA LL.C O M
18 In TV and/or SAT mode : Text On
In DVD and/or AMP mode : Skip Reverse
In TV mode : = DTV
In SAT mode := Skip Reverse
In DVD mode : = DVD/HDD,
DVD/VCR or
TV/DVD
19 In TV and SAT mode : Hold/Stop
In DVD and/or AMP mode : Record
In SAT mode : = Record
20In TV and/or SAT mode : Text Expand
In DVD and AMP mode : Stop
In SAT mode := Stop
21 In TV and/or SAT mode : Text off
In DVD and AMP mode : Skip Forward
In SAT mode : = Skip Forward
22 In TV and SAT mode : Red (fastext)
In DVD mode : Zoom or SP/LP
FAV
In SAT and
AMP mode := Favourite
23 In TV and SAT mode : Green (fastext)
In DVD mode : Open/Close or Guide
OPEN
In SAT mode := TV/Radio or
Open/Close
24 In TV and SAT mode : Yellow (fastext)
In DVD mode : Audio or Timer
AUDIO
In SAT and
AMP mode := Audio or
Language
25 In TV and SAT mode : Blue (fastext)
In DVD mode : PVR, List or Subtitle
PVR/LIST
In SAT mode := PVR, List or
Subtitle
-Some functions can be reached simlpy pressing and
releasing the MAGIC key before pressing the corresponding function
(the MAGIC key will remain shifted for 10 seconds).
inatone0217
Black Star0247
Blacktron0282
Blackway0282
B
laupunkt0554 0191 0535 0195
0200 0213 0327 0328
Example: To set up the ONE FOR ALL 4 for your television:
1Find the code for your device (e.g. Bennett
Television) in the Code list (page 164 - 182 in the
manual). Codes are listed by device type and brand
name. The most popular code is listed first.
Make sure your device is switched on
(not on standby).
2Press the TV key on the ONE FOR ALL 4 to select the
device you wish to Set-Up.
3Press and hold down the MAGIC key
(for approximately 3 seconds) until
the red LED (underneath the TV key
in this example) blinks twice.
The red LED will blink once, then twice.
4Enter your four-digit device code using the number
_ _ _ _
keys (e.g. Bennett code 0556). The red LED will
x2
blink twice to confirm that the code is stored.
5Now, aim the ONE FOR ALL 4 at your device and press
OFF. If your device switches off, the ONE FOR ALL 4
is ready to operate your device.
6.Next, switch your device back on (pressing ON, a
number key or CH+) and try all the remote’s
functions to ensure they are working properly.
If the functions do not work properly, repeat steps 1-5
using another code listed under your brand.
- If your device does not respond, follow steps 1 to 5 with each code listed
for your brand. If none of the codes listed for your brand operate your
device OR if you your brand is not listed at all, try the search method
described on page 9.
- Some codes are quite similar. If your device does not respond or is not
functioning properly with one of the codes, try another code listed under
your brand.
- Remember to press the correct device key before operating your device.
Only one device can be assigned to a device mode. If your original remote
operates more than one device, you need to set up each device separately.
- If you find that some functions are missing you can either “learn” them
from your original remote or use “Key Magic®” if your original remote is
broken.
8WW W.ON EFORA LL.C O M
Search Method
--> If your device does not respond to the ONE FOR ALL 4 after you
have tried all the codes listed for your brand.
--> The Search Method may also work if your brand is not listed at
all.
The Search Method allows you to find the code for your device by scanning
through all the codes contained in the memory of the ONE FOR ALL 4.
Example: To search for your TV code:
1 Switch on your television (not on standby) and aim your ONE FOR ALL
at your TV.
2Press the TV key on your ONE FOR ALL 4.
3Press and hold down the MAGIC key
(for appraximately 3 seconds) until the
red LED (underneath the TV key
in this example) blinks twice.
The red LED will blink once, then twice.
x2
4Press 9 9 1. The red LED will blink twice.
5Next, press OFF.
- If you wish you may also search for your code using
another function than “OFF”. Simply choose between 0,
1, 2, 3, VOL+, PLAY, STOP or MUTE instead.
6Aim the ONE FOR ALL 4 at your Device. Now press CH+
over and over, until your e.g. Television switches off.
- Everytime you press the CH+ key the ONE FOR ALL 4 will
send out a POWER signal (the function you chose at step
5) from the next code contained in the memory.
- You may have to press this key many times (up to 150
times) so please be patient.
- If you skip past a code, you can go to the previous
code(s) by pressing the CH- key.
- Remember to keep pointing the ONE FOR ALL 4 at your
Device while pressing this key.
7As soon as your Device switches off, press the MAGIC
key to store the code.
-If your Device does not switch on pressing the ON key,
simply press the OFF key, a number key or CH+ to switch your e.g.
Television back on.
-To search for the code for another device follow the instructions above
only press the appropriate device key instead of TV during step 2.
-If your Video’s original remote control does not have a POWER key, press
PLAY instead of OFF during step 5.
WW W.ON EFORA LL.C O M9
Code Blink out
(To find out which code is currently programmed)
Once you have Set-Up your ONE FOR ALL 4, you can blink back your
SET-UP CODE for future reference.
Example: To blink out your Television code:
1Press TV once.
2Press and hold down the MAGIC key
3Press 9 9 0. The red LED underneath the TV key will blink
4For the first digit of your four-digit code, press 1 and
5For the second digit, press 2 and count all the red blinks.
6For the third digit, press 3 and count all the red blinks.
7For the fourth digit, press 4 and count all the red blinks.
-If there are no blinks, the digit is "0".
-If you are not sure how many times it blinked, simply press
the corresponding digit again to repeat the blink-back.
(for approximately 3 seconds) until the
red LED (underneath the TV key
in this example) blinks twice.
The red LED will blink once, then twice.
twice.
count all the red blinks.
Now you have your four-digit code.
x2
Quick Code Reference
Device TypeCode
1.__________________________________
2.__________________________________
3.__________________________________
4.__________________________________
10WW W.ON EFORA LL.C O M
■■■■■■ ■
■■■■■■ ■■
■■■■■■ ■
■■■■■■ ■
■
■
■
The Learning Feature
(How to copy functions from your original working remote
onto the ONE FOR ALL 4)
Before you start:
- Make sure your original remote control is working correctly.
- Make sure neither your ONE FOR ALL, nor your original remote control
is pointing at your device.
Example: To copy the “mono/stereo” function from your original TV
remote onto the ”Red”key of your ONE FOR ALL 4.
1 Place both remote controls (the ONE FOR ALL 4 and your
original) on a flat surface. Make sure the ends which you
normally point at your device are facing each other. Keep
the remotes at a distance of 2 to 5 cm.
2Press and hold down the MAGIC key
(for approximately 3 seconds) until the
red LED (underneath the TV key
in this example) blinks twice.
The red LED will blink once, then twice.
x2
3Press 9 7 5 (the red LED will blink twice).
4Press the device key (on the ONE FOR ALL remote) to
select the mode to which you want to copy the learned
function (Example: TV key).
5Press the key (on the ONE FOR ALL remote)
where you want to place the learned function
(Example: ”Red” key). The red LED
(underneath the TV key in this example)
will flash rapidly.
6Press and hold the key (on your original remote) that
you want to copy until the red LED blinks twice
(Example: “mono/stereo” key).
If you want to copy other functions within the same
mode, simply repeat steps 5 and 6 pressing the next key
you want to copy by learning.
7To exit the learning mode, press and hold down
the MAGIC key until the red LED blinks twice.
- Learning is mode specific. To access your learned function,
press the appropriate device key first.
- The ONE FOR ALL 4 can learn approximately 100 functions.
- You can replace a learned function by placing another learned
function on top.
- Upon changing the batteries, your learned functions will be retained.
WW W.ON EFORA LL.C O M11
Shifted Learning (magic = Shift key)
You can also learn a function on a key of the ONE FOR ALL without
sacrificing the original ONE FOR ALL function.
To install a Shifted Learning function:
simply follow steps 1 - 7 on the previous page.
..only, at step 5 first...
Press and release the MAGIC (= SHIFT) key then.....
5Press the (e.g.) Red key. The red.........
To access the shifted function:
press MAGIC (= Shift key) and then the key you have learned on
(e.g. Red key in our example on the previous page).
To delete a learned function:
1 Press and hold down the MAGIC key until the red LED
(underneath the TV key in this example) blinks twice. The red LED
will blink once, then twice.
2 Press 9 7 6 (the red LED key will blink twice).
3 Press the device key in which the function will be deleted.
4 Press twice on the learned key which will be deleted (underneath
the TV key in this example) and the original functions of the ONE FOR
ALL 4 will now be present.
- If there is another key which you wish to delete, repeat steps 1-4.
- To delete a Shifted Learned feature, press MAGIC before you press “the
learned key to be deleted” (during step 4).
To delete all learned functions within a specific mode:
1 Press and hold down the MAGIC key until the red LED (underneath
the TV key in this example) blinks twice. The red LED will blink once,
then twice.
2 Press 9 7 6 (the red LED will blink twice).
3 Press the appropriate device key twice.
Operational Reset
The Operational Reset will erase:
- all learned functions
- all Key Magic functions
- all Macros
1 Press and hold down the MAGIC key until the red LED (underne-
ath the TV key in this example) blinks twice. The red LED will blink
once, then twice.
2 Press 9 8 0 (the red LED will blink four times).
12WW W.ON EFORA LL.C O M
Extra Features
Mode re-assignment
(Changing a device mode)
It is possible to change the mode of any device key. This is useful if you
want to set up two of the same devices on the ONE FOR ALL 4. The code
can be set up using “Direct code set up” (pag. 5) or “Search method” (pag.
6). To change a device key, see the three examples below.
Example 1) if you want to program a second TV on the AMP key.
Example 2) if you want to program a second TV on the DVD key.
Example 1:
To program a second Television on the AMP key (for example), you need
to change the AMP key into a TV key, so press:
(*)(**)
The AMP key has now become a second TV key.
Now enter the Set-Up code for your second TV by pressing:
Example 2:
To program a second Television on the DVD key (for example), you need
to change the DVD key into a TV key, so press:
(*)(**)
The DVD key has now become a second TV key.
Now enter the Set-Up code for your second TV by pressing:
(*) (TV code) (**)
(*) (TV code) (**)
_ _ _ _
_ _ _ _
Resetting a Device key
Example: To reset the AMP key to its original mode, press:
(*)(**)
Example: To reset the DVD key to its original mode, press:
(*)(**)
(*) Press and hold down the MAGIC key until the red LED underneath
the last selected device key will blink twice.
(**) The red LED underneath the last selected device key will blink twice.
WW W.ON EFORA LL.C O M13
Extra Features
Volume Lock
This feature allows you control the volume from a certain device, without
having to change to that device mode (e.g. controlling the volume of your
amplifier from any mode).
To punch through to AMP volume while in the TV, DVD or SAT
mode:
1.Press and hold down the MAGIC key until the red LED
2.Press 9 9 3.
3.Then press the AMP key and the red light will blink
Result: within every mode, whenever you press the VOL+/- or MUTE keys,
this will be send out from AMP mode.
To cancel the “Volume Lock” per mode:
Example: to cancel the “Volume Lock” for the DVD mode.
1.Press DVD once.
2Press and hold down the MAGIC key until the red LED
3.Press 9 9 3.
underneath the last selected device key will blink twice.
The red LED will blink once, then twice.
twice.
underneath the DVD key will blink twice. The red LED will
blink once, then twice.
4.Then press the Volume (-) key and the red LED
Result: being in DVD mode, you will be able to control VOL+/- or MUTE
functions of your DVD (provided it has volume control).
To cancel the „Volume Lock“ for all modes:
1Press and hold down the MAGIC key until the red LED
2.Press 9 9 3.
3.Press the Volume (+) key and the red LED will
Result: Each device mode will control its own VOL+/- and MUTE again.
will blink four times.
underneath the last selected device key will blink twice.
The red LED will blink once, then twice.
blink four times.
14WW W.ON EFORA LL.C O M
Extra Features
S
AT/CBLSAT/CBL
D
VDDVD
A
MP/TUNERAMP/TUNER
Macros (Sequence of commands)
Macros (Direct)
You can program your ONE FOR ALL 4 to issue a sequence of commands at
the press of one button. Any sequence of commands you regularly use can
be reduced to one key stroke for your convenience.
Example: To switch off your Television, Satellite Receiver and DVD
player with one keypress (e.g. red key):
1Press and hold down the MAGIC key until the red LED
underneath the last selected device key will blink twice. The
red LED will blink once, then twice.
2Press 9 9 5.
3Then press the Red key to which the Macro will be assigned.
4Next press TV, OFF, SAT, OFF, DVD, OFF.
5To store the Macro, press and hold down the MAGIC key until the
red LED underneath the last selected device key will blink twice.
The red LED will blink once, then twice.
6Whenever you press the ”Red” key, the ONE FOR ALL 4 will switch
off your Television, Satellite Receiver and DVD player.
-Make sure that you program a Macro on a spare key that you don’t use in
any mode.
-Once you program a Macro on a specific key, the sequence will work
regardless of the mode (TV, SAT, DVD and AMP) you are using.
-Each MACRO can consist of a maximum of 35 key strokes.
-If you had to hold down a key for a few seconds on the
original remote control to get a function, this function may not work in a
macro on your ONE FOR ALL remote.
-To avoid accidental recordings with the ONE FOR ALL 4, you must press
the Record key twice to begin recording. Because of this, we recommend
you not to assign a Macro or Shifted Macro to the Record key.
-If you program a Macro on a key, the original function will become
shifted (excluding REW, PLAY, PAUZE, FF, SKIP Forward, SKIP Back, STOP,
REC, Red, Green, Yellow and Blue). Press the MAGIC then the key to
access it.
WW W.ON EFORA LL.C O M15
Extra Features
To erase the Macro from the Red key, press:
1Press and hold down the MAGIC key until the red LED underneath
the last selected device key will blink twice. The red LED will blink
once, then twice.
2Press 9 9 5.
3Then press the Red key.
4Press and hold down the MAGIC key until the red LED underneath
the last selected device key will blink twice. The red LED will blink
once, then twice.
Shifted Macros
If you do not want to sacrifice any key it is also possible to install a
“Shifted Macro”.
If for example, you want to program a shifted Macro on the OFF
key, simply press MAGIC once then the OFF key during
step 3.
Example: To switch off your Television, Satellite Receiver and DVD
player with one keypress (e.g. pressing MAGIC then OFF):
1Press and hold down the MAGIC key until the red LED (underne-
ath the TV key in this example) blinks twice. The red LED will blink
once, then twice.
2Press 9 9 5.
3Then press the OFF key to which the Macro will be assigned.
4Next press TV, OFF, SAT, OFF, DVD, OFF.
5To store the Macro, Press and hold down the MAGIC key until the
red LED (underneath the TV key in this example) blinks twice. The
red LED will blink once, then twice.
Result: Now everytime you press MAGIC, then the OFF key, the ONE FOR
ALL will switch off your Television, Satellite Receiver and DVD Player.
To erase the Shifted Macro from the OFF key press:
MAGIC* 9 9 5 MAGIC OFF key MAGIC*
To erase all Macro and Shifted Macro:
MAGIC* 9 9 5 MAGIC*
* Here you must press and hold down the MAGIC key until the red LED
(underneath the TV key in this example) blinks twice. The red LED will
blink once, then twice.
-You can install a Shifted Macro on any key, except for the
device keys (TV, DVD, SAT and AMP), the MAGIC key and the LIGHT key.
-If you place a Macro shifted on a digit key, access the original function by
pressing the MAGIC key twice and then the digit key.
16WW W.ON EFORA LL.C O M
Extra Features
Key Magic
®
how to program missing functions
Key Magic® is an exclusive ONE FOR ALL feature that ensures that many
functions of your original remote control can be operated - even those that
do not have their own key on the ONE FOR ALL keypad. Frequently used
functions can be assigned to a key of your choice using the Key Magic
feature of your ONE FOR ALL.
In order to program a certain function with Key Magic you need to know
the corresponding function code. As these function codes vary with
different types of devices, they cannot be found in the manual. You can
request your function codes calling our consumer service or by sending us a
fax or e-mail.
Please mention:
• The 4-digit set-up code your device is working with.
• How the function was labelled on your original remote control.
Once you obtain(ed) your function code(s) from customer service,
programming the code is easy:
1Press the device key (TV, SAT, DVD or AMP).
2Press and hold down the MAGIC key until the red LED
(underneath the TV key in this example) blinks twice. The red LED
will blink once, then twice.
3Press 9 9 4. The red LED will blink twice.
4Press the MAGIC key once.
5Enter the 5-digit function code (provided by customer service).
6Press the key to which the function will be assigned.
The red LED underneath the last selected device key will
blink twice.
EXTENDED FUNCTION REFERENCE
(first entry is an example):
-To access the function you have programmed, press the
corresponding device key first.
-Key Magic can be assigned to any key EXCEPT the Device keys, LIGHT and
the MAGIC key.
-Please note all the extended function codes you obtain from customer
service for easy future reference.
WW W.ON EFORA LL.C O M17
SAT/CBLSAT/CBL
DVDDVD
AMP/TUNERAMP/TUNER
Extra Features
Key Move
How to copy a function to another key ‘within a
device mode’ or towards ‘another device mode’
Key Move allows you to configure the keypad as you wish.
Example: how to Key Move the “Play” function from DVD mode towards
AMP mode.
1Press and hold down the MAGIC key until the red LED
underneath the last selected device key will blink twice.
The red LED will blink once, then twice.
2Press 9 9 4. The red LED underneath the last selected
device-mode-key will blink twice.
3Press the source device mode (e.g. DVD key).
4Press the key you wish to move (e.g. PLAY key).
5Select the device mode to which the fuction will be assigned
(e.g. AMP key).
6Press the key to which the function will be assigned (e.g. PLAY
key). The red LED underneath the last selected device key
will blink twice.
Result: now also being in AMP mode you will be able to play your DVD.
To restore the play key in the AMP mode to it’s original function press:
AMPMAGIC**994 PLAY PLAY (**)
(**)Press and hold down the MAGIC key until the red LED
underneath the last selected device key will blink twice.
-You can Key Move to any key EXCEPT the Device keys, LIGHT and the
MAGIC key.
-Not valid for learned functions or fuctions obtained through Key Magic.
18WW W.ON EFORA LL.C O M
Problem & Solution
Problem:
Your brand is not listed in
the code section?
The ONE FOR ALL does not
operate your device(s)?
The ONE FOR ALL is not
performing commands
properly?
Problems changing
channels?
Video not recording?
The ONE FOR ALL does not
respond after pressing a
key?
The red LED does not blink
when you press
a key?
Solution:
Try the search method on page 9.
A) Try all the codes listed for your
brand. B) Try the search method on
page 9.
You may be using the wrong code.
Try repeating the Direct Set-Up
using another code listed under
your brand or start the search
method over again to locate the
proper code.
Enter the programme number
exactly as you would on your
original remote.
As a safety feature on your ONE
FOR ALL, you must press the Record
key twice.
Make sure you are using new
batteries and are aiming the ONE
FOR ALL at your device.
Replace batteries with 4 fresh, new
“AAA” alkaline batteries.
Für Ihre ONE FOR ALL 4 benötigen Sie 4 neue „AA/LR6”-Alkalibatterien.
1Drücken Sie „Battery Unlock”, um die Batterie-
2 Legen Sie die Batterien entsprechend den „+” und „-”-Markierungen
in das Batteriefach ein.
3 Bringen Sie die Batteriefachabdeckung wieder an.
abdeckung für die ONE FOR ALL 4 freizugeben.
Das Tastenfeld
1 Ausschalten des Geräts
2 Einrichten der ONE FOR ALL 4 .
3 Hintergrundbeleuchtung Ein/Aus
4 Einschalten des Geräts
5 Gerätetasten mit Modusanzeige
6 Zifferntasten
Zusätzlich kann die MAGIC-Taste auch als
UMSCHALTTASTE verwendet werden.
Beim Betrieb der ONE FOR ALL leuchtet bei jedem
Tastendruck eine rote LED (Leuchtdiode) unter der
Gerätetaste, um den Gerätemodus anzuzeigen, in
dem Sie sich befinden.
Fernsehgerät/LCD/Plasma/Projektor/Rückprojektor
DVD-Spieler/DVD-R/DVD Home Cinema/DVD
Kombi/DVD/HDD, Video-Kassettenrecorder/TV/VCR Kombi/
DVD/VCR Kombi
Satellitenempfänger, DVB-T, Kabeldecoder,
DSS/Videozubehör (z. B. Media Centers), Personal Video
Recorder, Festplattenrecorder
Audio/Audio Receiver/Tuner/Verstärker/(DVD) Home
Cinema
Wenn Ihre Original-Fernbedienung eine „+20”-Taste
besitzt, wird diese Funktion mit der Taste AV aufgerufen.
Wenn Ihre Original-Fernbedienung eine „+10”- oder
Taste„-/--”-Taste besitzt, wird diese Funktion mit der
„-/--” Taste aufgerufen.
In AMP mode : Input Select keys
TUNTV
DVDSAT/CBL
CDTape
VideoAudio
AUX6CH/5,1
WW W.ON EFORA LL.C O M21
7 Im TV-Modus : AV/Input oder 20 oder C/P
Im SAT-Modus : TV/SAT oder TV/DTV
Im DVD-Modus: TV/DVD oder 20
Im AMP-Modus: Function Select oder Input Source
8 Volume +/- und Mute-Tasten
9 Menü
10 Verlassen des Menüs
11 Kanal +/- -Tasten
12 Navigieren in der Menübedienung und
13 Im TV, SAT und/oder DVD-Modus: Programmführer
14 Im TV- und/oder SAT-Modus: Recall
RECALL
Wenn auf dem von Ihnen programmierten Gerät
keine Lautstärkefunktion vorhanden ist, bedienen Sie
damit die „VOL +/-”- und die Stummschaltungsfunktion Ihres Fernsehgeräts.
Im TV modus := Colour +/-
Im TV-Modus := Helligkeit +/-
Bestätigung der Auswahl durch Drücken der
OK-Taste
Im AMP-Modus: DSP
Im DVD und/oder AMP-Modus: Rewind
Im SAT-Modus: = Rewind
15 Im TV-Modus: = 16:9
16:9
16 Im TV- und/oder SAT-Modus: Info oder OSD
INFO
17 Im TV- und/oder SAT-Modus: PIP
PIP
Im SAT-Modus: = Optionen
Im DVD und/oder AMP-Modus: = Play
In SAT-modus : = Play
Im DVD und AMP-Modus: Pause
Im SAT-Modus:= Pause
Im DVD und AMP-Modus: Fast Forward
In SAT-modus : = Fast Forward
22WW W.ON EFORA LL.C O M
18 Im TV- und/oder SAT-Modus: Text on
Im DVD und/oder AMP-Modus: Skip Reverse
Im TV-Modus: = DTV
Im SAT-Modus: = Skip Reverse
Im DVD-Modus: = DVD/HDD,
DVD/VCR oder
TV/DVD
19 Im TV- und/ SAT-Modus: Hold/Stop
Im DVD und/oder AMP-Modus: Record
Im SAT-Modus: = Record
20Im TV- und/oder SAT-Modus: Text Expand
Im DVD und AMP-Modus: Stop
Im SAT-Modus: = Stop
21 Im TV- und/oder SAT-Modus: Text off
Im DVD und AMP-Modus: Skip Forward
Im SAT-Modus: = Skip Forward
22 Im TV- und/ SAT-Modus: Rot (fastext)
Im DVD-Modus: Zoom oder SP/LP
FAV
Im SAT und
AMP-Modus: = Favourite
23 Im TV- und/ SAT-Modus: Grün (fastext)
Im DVD-Modus: Open/Close or Guide
OPEN
Im SAT-Modus: = TV/Radio oder
Open/Close
24 Im TV- und/ SAT-Modus: Gelb (fastext)
Im DVD-Modus: Audio or Timer
AUDIO
Im SAT und
AMP-Modus:= Audio oder
Language
25 Im TV- und/ SAT-Modus: Blau (Fastext)
Im DVD-Modus: PVR, List oder Subtitle
PVR/LIST
Im SAT-Modus: = PVR, List oder
Subtitle
-Für einige Funktionen drücken Sie kurz die MAGIC-Taste, bevor Sie die
entsprechende Funktion drücken. (die MAGIC-Taste bleibt 10 Sekunden
auf der zweiten Ebene).
inatone0217
Black Star0247
Blacktron0282
Blackway0282
Blaupunkt0554 0191 0535 0195
0
200 0213 0327 0328
(Beispiel: Einrichten der ONE FOR ALL 4 für die Bedienung des
Fernsehgeräts:
1 Ermitteln Sie den Code für Ihr Gerät(z.B. Bennett)
2 Drücken Sie dieTV-Taste auf der ONE FOR ALL 4 für
3 Drücken und halten Sie ca. 3 Sekunden
4 Geben Sie mit den Zifferntasten den vierstelligen
_ _ _ _
5 Richten Sie jetzt die ONE FOR ALL 4 auf das Gerät und
Fernsehgerät)in der Codeliste (Seite 164 - 182 im
Bedienungshandbuch). Die Codes sind nach Gerätetyp
und Markenname aufgelistet. Die häufigsten Codes
sind zuerst aufgeführt.
Achten Sie darauf, dass Ihr Gerät eingeschaltet
ist (nicht in Standby).
das Gerät, das Sie einrichten möchten.
die MAGIC-Taste, bis die rote LED
(unter der TV-Taste in diesem Beispiel)
zweimal blinkt. Die rote LED blinkt
einmal, dann zweimal.
x2
Gerätecode ein (z.B. Bennett-Code 0556). Die rote
LED blinkt zweimal, um zu bestätigen, dass der Code
gespeichert ist.
drücken Sie OFF. Wenn das Gerät abschaltet, ist die
ONE FOR ALL 4 für die Bedienung Ihres Geräts bereit.
6. Schalten Sie das Gerät wieder ein (drücken Sie dazu
ON, eine Zifferntaste oder CH+) und prüfen Sie
alle Funktionen der Fernbedienung, um zu prüfen, ob
sie alle einwandfrei arbeiten.
Wenn nicht alle Funktionen einwandfrei arbeiten,
wiederholen Sie Schritt 1 - 5 mit einem anderen Code,
der für Ihre Marke angegeben ist.
- Wenn Ihr Gerät nicht anspricht, führen Sie Schritt 1 bis 5 mit allen Codes durch,
die für Ihre Marke angegeben sind. Wenn Sie Ihr Gerät mit keinem der für Ihre
Marke angegebenen Codes bedienen können ODER wenn Ihre Marke überhaupt
nicht aufgeführt ist, versuchen Sie es mit der Suchmethode auf Seite 25.
- Manche Codes sind sehr ähnlich. Wenn Ihr Gerät mit einem der Codes nicht
reagiert oder nicht einwandfrei arbeitet, versuchen Sie es mit einem anderen
Code, der unter Ihrer Marke aufgeführt ist.
- Vergessen Sie nicht, vor der Bedienung Ihres Geräts die richtige Gerätetaste
zu drücken.
Einem Gerätemodus kann nur ein Gerät zugewiesen werden. Falls Ihre Original-Fernbedienung mehr als ein Gerät bedient, müssen Sie jedes Gerät
getrennt einrichten.
- Wenn Sie feststellen, dass manche Funktionen fehlen, können Sie sie entwe-
der mit der Lernfunktion von Ihrer Original-Fernbedienung übernehmen oder,
wenn ihre Original-Fernbedienung nicht mehr arbeitet, die „Key Magic®”Taste benutzen.
24WW W.ON EFORA LL.C O M
Suchmethode
—> Wenn Ihr Gerät nicht auf die ONE FOR ALL 4 reagiert, nachdem
Sie alle für Ihre Marke aufgeführten Codes ausprobiert haben.
—> Die Suchmethode kann auch funktionieren, wenn Ihre Marke
überhaupt nicht aufgeführt ist.
Mit der Suchmethode können Sie den Code für Ihr Gerät herausfinden, in
dem Sie alle Codes durchsuchen, die im Speicher der ONE FOR ALL 4
enthalten sind.
(Beispiel : Suche nach Ihrem TV-Code:
1 Schalten Sie Ihr Fernsehgerät ein (Standby genügt nicht) und richten
Sie die ONE FOR ALL auf Ihr Fernsehgerät.
2 Drücken Sie dieTV-Taste auf Ihrer ONE FOR ALL 4.
3 Drücken und halten Sie ca. 3 Sekunden
die MAGIC-Taste, bis die rote LED
(unter der TV-Taste in diesem Beispiel)
zweimal blinkt. Die rote LED blinkt einmal,
dann zweimal.
x2
4 Drücken Sie 9 9 1. Die rote LED blinkt zweimal.
5 Drücken Sie dann OFF.
- Wenn Sie Ihren Code mit einer anderen Funktion als
„OFF” suchen möchten, wählen Sie stattdessen zwischen
0, 1, 2, 3, VOL+, PLAY, STOP oder MUTE.
6 Richten Sie die ONE FOR ALL auf Ihr Gerät. Drücken Sie
jetzt immer wieder CH+ , bis z.B. Ihr Fernsehgerät
abschaltet.
- Jedes Mal, wenn Sie die CH+ Taste drücken, sendet die ONE FOR
ALL 4 ein POWER-Signal (die von Ihnen bei Schritt 5 gewählte
Funktion) aus dem nächsten Code im Speicher.
- Möglicherweise müssen Sie die Taste sehr oft drücken (bis zu 150
Mal); haben Sie also bitte Geduld.
- Wenn Sie einen Code übersprungen haben, können Sie zum
vorherigen Code gehen, indem Sie die Taste CH- drücken.
- Achten Sie darauf, dass die ONE FOR ALL 4 immer auf das Gerät
gerichtet bleibt, während Sie diese Taste drücken.
7 Wenn Ihr Gerät ausschaltet, drücken Sie
die MAGIC-Taste, um den Code zu speichern.
- Wenn Ihr Gerät bei Drücken der ON-Taste nicht einschaltet, drücken Sie
einfach die OFF-Taste, eine Zifferntaste oder CH+, um z.B.
Ihr Fernsehgerät wieder einzuschalten.
- Um den Code für ein weiteres Gerät zu suchen, folgen Sie den obigen
Anweisungen, wobei Sie jedoch bei Schritt 2 statt TV die entsprechende
Gerätetaste drücken.
- Falls die Originalfernbedienung Ihres Videogeräts keine POWER-Taste besitzt,
drücken Sie bei Schritt 5 PLAY statt OFF.
Wenn Sie die ONE FOR ALL 4 eingerichtet haben, können Sie den
SET-UP CODE zur künftigen Überprüfung blinken lassen.
(Beispiel : Um den Fernsehgerät-Code blinken zu lassen:
1 Drücken Sie die TV-Taste einmal.
2 Drücken und halten Sie ca. 3 Sekunden
3Drücken Sie 9 9 0 . Die rote LED unter der TV-Taste blinkt
4 Drücken Sie für die erste Stelle des vierstelligen
5 Drücken Sie für die zweite Stelle 2 und zählen Sie, wie oft
6 Drücken Sie für die dritte Stelle 3 und zählen Sie, wie oft
7 Drücken Sie für die vierte Stelle 4 und zählen Sie, wie oft
- Wenn die LED nicht blinkt, ist die Ziffer „0”.
- Wenn Sie sich nicht sicher sind, wie oft geblinkt wurde, drücken Sie die
entsprechende Stelle nochmals, um das Blinken zu wiederholen.
die MAGIC-Taste, bis die rote LED
(unter der TV-Taste in diesem Beispiel)
zweimal blinkt. Die rote LED blinkt einmal,
dann zweimal.
jetzt zweimal.
Codes1 und zählen Sie, wie oft die rote LED blinkt.
die rote LED blinkt.
die rote LED blinkt.
die rote LED blinkt.
Damit haben Sie den vierstelligen Code ermittelt.
x2
Codeübersicht
GerätetypCode
1.__________________________________
2.__________________________________
3.__________________________________
4.__________________________________
26WW W.ON EFORA LL.C O M
■■■■■■ ■
■■■■■■ ■■
■■■■■■ ■
■■■■■■ ■
■
■
■
Die Lernfunktion
(Kopieren von Funktionen der Originalfernbedienung
auf die ONE FOR ALL 4)
Vorbereitung:
-Stellen Sie sicher, dass Ihre Originalfernbedienung einwandfrei
arbeitet.
-Stellen Sie sicher, dass weder die ONE FOR ALL noch Ihre
Originalfernbedienung auf Ihr Gerät gerichtet sind.
(Beispiel : Kopieren der Funktion „Mono/Stereo” von Ihrer Original
TV-Fernbedienung auf die „rote” Taste Ihrer ONE FOR ALL 4.
1 Legen Sie beide Fernbedienungen (die ONE FOR ALL 4 und Ihre
Originalfernbedienung) auf eine ebene Oberfläche. Richten Sie
die beiden Enden, die Sie normalerweise auf das Gerät richten,
zueinander aus. Der Abstand der beiden Fernbedienungen sollte 2 bis 5 cm betragen.
2 Drücken und halten Sie ca. 3 Sekunden
die so stellen sie sein ein Jahr MAGIC-Taste,
bis die rote LED (unter der TV-Taste in
diesem Beispiel) zweimal blinkt. Die rote
LED blinkt einmal, dann zweimal.
x2
3Drücken Sie 9 7 5. Die rote LED blinkt zweimal.
4 Drücken Sie die Gerätetaste (auf der Fernbedienung
ONE FOR ALL), um den Gerätemodus zu wählen, auf denSie die zu lernende Funktion kopieren möchten (Beispiel:
TV-Taste).
5 Drücken Sie die Gerätetaste (auf der
Fernbedienung ONE FOR ALL) , die Sie mit
der zu lernenden Funktion belegen möchten
(Beispiel: „rote” Taste. Die rote LED
(in diesem Beispiel unter der TV-Taste) blinkt
jetzt schnell.
6 Drücken und halten Sie die Taste (auf Ihrer ursprüngli-
chen Fernbedienung), die Sie kopieren möchten, bisdie rote LED zweimal blinkt (Beispiel: „Mono/Stereo”Taste).
Wenn Sie sonstige Funktionen innerhalb desselben Modus
kopieren wollen, wiederholen Sie einfach Schritt 5 und 6,
wobei Sie jeweils die nächste Taste drücken, die Sie durch
Lernen kopieren möchten.
7Um den Lernmodus zu beenden, drücken und halten Sie
die MAGIC-Taste gedrückt, bis die rote LED zweimal
blinkt.
- Das Lernen ist modusspezifisch. Um auf die gelernte Funktion zuzugreifen,
drücken Sie zuerst die entsprechende Gerätetaste.
- Die ONE FOR ALL 4 kann etwa 100 Funktionen lernen.
- Sie können eine gelernte Funktion ersetzen, indem Sie diese mit einer
anderen Funktion überschreiben.
- Bei einem Batteriewechsel bleiben die gelernten Funktionen erhalten.
WW W.ON EFORA LL.C O M27
Lernen auf der zweiten Ebene (Magic = Umschalttaste)
Sie können auch eine zu lernende Funktion auf eine Taste der ONE FOR ALL
legen, ohne die ursprüngliche ONE FOR ALL-Funktion zu verlieren.
Um eine Lernfunktion auf der zweiten Ebene einzurichten,
führen Sie einfach Schritt 1 - 7 auf der vorherigen Seite durch.
... außer dass Sie bei Schritt 5 ...
kurz die MAGIC- (= SHIFT-)Taste drücken und dann
5 (z. B.) die rote Taste drücken. Die rote .........
Um auf die Funktion der zweiten Ebene zuzugreifen,
drücken Sie MAGIC (= Shift-Taste) und dann die Taste, auf der sich die
gelernte Funktion befindet (z. B. die rote Taste im Beispiel auf der vorherigen Seite).
Löschen einer gelernten Funktion:
1 Drücken und halten Sie die MAGIC-Taste gedrückt, bis die rote LED
(unter der TV-Taste in diesem Beispiel) zweimal blinkt. Die rote LED
blinkt einmal, dann zweimal.
2 Drücken Sie 9 7 6. Die rote LED blinkt zweimal.
3 Drücken Sie die Gerätetaste, von der die Funktion gelöscht werden
soll.
4 Drücken Sie die gelernte Taste zweimal; diese wird gelöscht
(unter der TV-Taste in diesem Beispiel), und die ursprünglichen
Funktionen der ONE FOR ALL 4 sind wieder vorhanden
- Wenn Sie eine weitere Taste löschen möchten, wiederholen
Sie Schritt 1 - 4.
- Um eine gelernte Funktion der zweiten Ebene zu löschen, drücken Sie
MAGIC, bevor Sie die zu löschende gelernte Taste drücken (bei Schritt 4).
Löschen aller gelernten Funktionen in einem
bestimmten Modus:
1 Drücken und halten Sie die MAGIC-Taste, bis die rote LED (unter der
TV-Taste in diesem Beispiel) zweimal blinkt. Die rote LED blinkt einmal,
dann zweimal.
2 Drücken Sie 9 7 6. Die rote LED blinkt zweimal.
3 Drücken Sie die entsprechende Gerätetaste zweimal.
Rücksetzen auf Auslieferungszustand
Rücksetzen auf Auslieferungszustand löscht:
- alle gelernten Funktionen
- alle Key Magic-Funktionen
- alle Makros
1 Drücken und halten Sie die MAGIC-Taste, bis die rote LED (unter
der TV-Taste in diesem Beispiel) zweimal blinkt. Die rote LED blinkt
einmal, dann zweimal.
2 Drücken Sie 9 8 0 (die rote LED blinkt viermal).
28WW W.ON EFORA LL.C O M
Zusätzliche Funktionen
Modus-Neuzuweisung
(Ändern eines Gerätemodus)
Sie können den Modus einer jeden Gerätetaste ändern. Dies ist nützlich,
wenn Sie zwei gleiche Geräte auf einer ONE FOR ALL 4 einrichten möchten.
Der Code kann mit „Direkte Codeeinrichtung” (Seite 24) oder
„Suchmethode” eingerichtet werden (Seite 25). Die drei nachfolgenden
Beispiele erklären, wie man eine Gerätetaste ändert.
Beispiel 1) wenn Sie ein zweites Fernsehgerät auf der AMP-Taste
Beispiel 2) wenn Sie ein zweites Fernsehgerät auf der DVD-Taste
Beispiel 1:
Um ein zweites Fernsehgerät z. B. auf der AMP-Taste zu programmieren,
müssen Sie die AMP-Taste in eine TV-Taste verwandeln; drücken Sie also:
Die AMP-Taste ist jetzt eine zweite TV-Taste.
Geben Sie jetzt den Einrichtungscode für das zweite Fernsehgerät ein,
indem Sie Folgendes drücken:
Example 2:
Um ein zweites Fernsehgerät z. B. auf der DVD-Taste zu programmieren,
müssen Sie die DVD-Taste in eine TV-Taste verwandeln; drücken Sie also:
Die DVD-Taste ist jetzt eine zweite TV-Taste.
Geben Sie jetzt den Einrichtungscode für das zweite Fernsehgerät ein,
indem Sie Folgendes drücken:
programmieren möchten.
programmieren möchten.
(*)(**)
(*) (TV-Code) (**)
(*)(**)
(*) (TV-Code) (**)
_ _ _ _
_ _ _ _
Rücksetzen einer Gerätetaste
Beispiel : Um die AMP-Taste in den ursprünglichen Modus
zurückzusetzen, drücken Sie:
(*)(**)
Beispiel : Um die DVD-Taste in den ursprünglichen Modus
zurückzusetzen, drücken Sie:
(*)(**)
(*) Drücken und halten Sie die MAGIC-Taste gedrückt, bis die rote LED
unter der zuletzt gewählten Gerätetaste zweimal blinkt.
(**) Die rote LED unter der zuletzt gewählten TV-Taste blinkt jetzt
zweimal.
WW W.ON EFORA LL.C O M29
Zusätzliche Funktionen
Volume Lock
Mit dieser Funktion können Sie die Lautstärke von einem bestimmten Gerät
aus regeln, ohne zuerst auf diesen Gerätemodus zu wechseln (z.B. wenn Sie
die Lautstärke Ihres Verstärkers aus einem beliebigen Modus regeln
möchten).
Direktbedienung der Lautstärke des AMP, während Sie sich im
TV-, DVD- oder SAT-Modus befinden:
1. Drücken und halten Sie die MAGIC-Taste gedrückt, bis
2. Drücken Sie 9 9 3.
3. Drücken Sie dann die AMP-Taste; die rote LED blinkt
Ergebnis: In jedem Modus wird jedes Mal, wenn Sie die VOL+/- oder MUTE
Taste drücken, dies aus dem AMP-Modus gesendet.
Beenden von „Volume Lock” pro Modus:
(Beispiel : Beenden des „Volume Lock” im DVD-Modus.
1. Drücken Sie DVDeinmal.
2 Drücken und halten Sie die MAGIC-Taste gedrückt, bis
3. Drücken Sie 9 9 3.
4. Drücken Sie dann die Taste Volume (-), und die rote LED
Ergebnis: Wenn Sie sich im DVD-Modus befinden, können Sie die
Funktionen „VOL+/-” oder „MUTE” Ihrer DVD bedienen (sofern diese eine
Lautstärkeregelung besitzt ).
die rote LED unter der zuletzt gewählten TV-Taste zweimal blinkt. Die rote LED blinkt einmal, dann zweimal.
zweimal.
die rote LED unter der DVD-Taste zweimal blinkt. Die rote
LED blinkt einmal, dann zweimal.
blinkt viermal.
Beenden von „Volume Lock” in allen Modi:
1 Drücken und halten Sie die MAGIC-Taste gedrückt, bis
2. Drücken Sie 9 9 3.
3. Drücken Sie dann die Taste Volume (+), und die rote LED
Ergebnis: Jeder Gerätemodus regelt wieder seine eigene VOL+/- und
MUTE.
die rote LED unter der zuletzt gewählten TV-Taste zweimal blinkt. Die rote LED blinkt einmal, dann zweimal.
blinkt viermal.
30WW W.ON EFORA LL.C O M
Loading...
+ 156 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.