OMRON SS-5GL Datasheet

SS

SS-

@@@@@@

1. Ratings

10 : 250 VAC 10.1A
5 : 125 VAC 5 A
01 : 30 VDC 0.1A

2. Actuator

None : Pin plunger
GL : Hinge lever
GL111 : Long hinge lever
GL13 : Simulated roller lever
GL2 : Hinge roller lever
GL02 : Hinge roller lever
(Roller material: Stainless) heat-resistant

3. Maximum Operating Force (OF)

None : 1.47 N {150 gf}

-F : 0.49 N {50 gf} (0.1 A, 5 A)

-E : 0.25 N {25 gf} (0.1 A)

123456

4. Contact form

None : SPDT

-2 : SPST-NC

-3 : SPST-NO

5. Terminals

None : Solder terminals
T : Quick-connect terminals (#110)
D : PCB terminals

6. Heat resistance

None : Standard (85°C)

-T : Heat-resistant (120°C)

Note. These values are for the pin plunger models.

Separator (Sold Separately), Terminal Connector (Sold Separately) Refer to "Basic Switch Common Accessories"

Subminiature Basic Switch

Subminiature Basic Switch
Offers High Reliability and
Security

● The OMRON's best-selling micro switches of a
wide variety from 0.1A to 10.1A.

● A variety of models are available, with operating
force ranging from low to high.

● Two split springs ensure a high stability and
durability of 30,000,000 operations.

RoHS Compliant

Model Number Legend

S
S

List of Models

●Standard Models

Actuator Terminals Contact Form Maximum Operating Force (OF)

Solder terminals

Quick-connect

terminals (#110)

PCB terminals

Solder terminals

Pin plunger

Quick-connect

terminals (#110)

PCB terminals

Solder terminals

Quick-connect

terminals (#110)

PCB terminals

Ratings

SPDT
SPST-NC SS-10-2 SS-5-2 SS-01-2
SPST-NO SS-10-3 SS-5-3 SS-01-3

SPDT SS-10T SS-5T SS-01T
SPST-NC SS-10-2T SS-5-2T SS-01-2T
SPST-NO SS-10-3T SS-5-3T SS-01-3T

SPDT SS-10D SS-5D SS-01D
SPST-NC SS-10-2D SS-5-2D SS-01-2D
SPST-NO SS-10-3D SS-5-3D SS-01-3D

SPDT
SPST-NC - SS-5-F-2 SS-01-F-2
SPST-NO - SS-5-F-3 SS-01-F-3

SPDT - SS-5-FT SS-01-FT
SPST-NC - SS-5-F-2T SS-01-F-2T
SPST-NO - SS-5-F-3T SS-01-F-3T

SPDT - SS-5-FD SS-01-FD
SPST-NC - SS-5-F-2D SS-01-F-2D
SPST-NO - SS-5-F-3D SS-01-F-3D

SPDT
SPST-NC - - SS-01-E-2
SPST-NO - - SS-01-E-3

SPDT --SS-01-ET
SPST-NC - - SS-01-E-2T
SPST-NO - - SS-01-E-3T

SPDT --SS-01-ED
SPST-NC - - SS-01-E-2D
SPST-NO - - SS-01-E-3D

1.47 N {150 gf}

0.49 N {50 gf}

0.25 N {25 gf}

10.1 A 5 A 0.1 A

SS-10 SS-5 SS-01

- SS-5-F SS-01-F

--SS-01-E

1

SS Subminiature Basic Switch

Separator (Sold Separately), Terminal Connector (Sold Separately) Refer to "Basic Switch Common Accessories"

Actuator Terminals Contact Form Maximum Operating Force (OF)

Solder terminals

Quick-connect

terminals (#110)

PCB terminals

S
S

Long hinge lever

Simulated roller lever

Hinge lever

Solder terminals

Quick-connect

terminals (#110)

PCB terminals

Solder terminals

Quick-connect

terminals (#110)

PCB terminals

Solder terminals

Quick-connect

terminals (#110)

PCB terminals

Solder terminals

Quick-connect

terminals (#110)

PCB terminals

Solder terminals

Quick-connect

terminals (#110)

PCB terminals

Solder terminals

Quick-connect

terminals (#110)

PCB terminals

Solder terminals

Quick-connect

terminals (#110)

PCB terminals

Solder terminals

Quick-connect

terminals (#110)

PCB terminals

SPDT
SPST-NC SS-10GL-2 SS-5GL-2 SS-01GL-2
SPST-NO SS-10GL-3 SS-5GL-3 SS-01GL-3

SPDT SS-10GLT SS-5GLT SS-01GLT
SPST-NC SS-10GL-2T SS-5GL-2T SS-01GL-2T
SPST-NO SS-10GL-3T SS-5GL-3T SS-01GL-3T

SPDT SS-10GLD SS-5GLD SS-01GLD
SPST-NC SS-10GL-2D SS-5GL-2D SS-01GL-2D
SPST-NO SS-10GL-3D SS-5GL-3D SS-01GL-3D

SPDT
SPST-NC - SS-5GL-F-2 SS-01GL-F-2
SPST-NO - SS-5GL-F-3 SS-01GL-F-3

SPDT - SS-5GL-FT SS-01GL-FT
SPST-NC - SS-5GL-F-2T SS-01GL-F-2T
SPST-NO - SS-5GL-F-3T SS-01GL-F-3T

SPDT - SS-5GL-FD SS-01GL-FD
SPST-NC - SS-5GL-F-2D SS-01GL-F-2D
SPST-NO - SS-5GL-F-3D SS-01GL-F-3D

SPDT
SPST-NC - - SS-01GL-E-2
SPST-NO - - SS-01GL-E-3

SPDT - - SS-01GL-ET
SPST-NC - - SS-01GL-E-2T
SPST-NO - - SS-01GL-E-3T

SPDT - - SS-01GL-ED
SPST-NC - - SS-01GL-E-2D
SPST-NO - - SS-01GL-E-3D

SPDT
SPST-NC SS-10GL111-2 SS-5GL111-2 SS-01GL111-2
SPST-NO SS-10GL111-3 SS-5GL111-3 SS-01GL111-3

SPDT SS-10GL111T SS-5GL111T SS-01GL111T
SPST-NC SS-10GL111-2T SS-5GL111-2T SS-01GL111-2T
SPST-NO SS-10GL111-3T SS-5GL111-3T SS-01GL111-3T

SPDT SS-10GL111D SS-5GL111D SS-01GL111D
SPST-NC SS-10GL111-2D SS-5GL111-2D SS-01GL111-2D
SPST-NO SS-10GL111-3D SS-5GL111-3D SS-01GL111-3D

SPDT
SPST-NC - SS-5GL111-F-2 SS-01GL111-F-2
SPST-NO - SS-5GL111-F-3 SS-01GL111-F-3

SPDT - SS-5GL111-FT SS-01GL111-FT
SPST-NC - SS-5GL111-F-2T SS-01GL111-F-2T
SPST-NO - SS-5GL111-F-3T SS-01GL111-F-3T

SPDT - SS-5GL111-FD SS-01GL111FD
SPST-NC - SS-5GL111-F-2D SS-01GL111-F-2D
SPST-NO - SS-5GL111-F-3D SS-01GL111-F-3D

SPDT
SPST-NC - - SS-01GL111-E-2
SPST-NO - - SS-01GL111-E-3

SPDT - - SS-01GL111-ET
SPST-NC - - SS-01GL111-E-2T
SPST-NO - - SS-01GL111-E-3T

SPDT - - SS-01GL111-ED
SPST-NC - - SS-01GL111-E-2D
SPST-NO - - SS-01GL111-E-3D

SPDT
SPST-NC SS-10GL13-2 SS-5GL13-2 SS-01GL13-2
SPST-NO SS-10GL13-3 SS-5GL13-3 SS-01GL13-3

SPDT SS-10GL13T SS-5GL13T SS-01GL13T
SPST-NC SS-10GL13-2T SS-5GL13-2T SS-01GL13-2T
SPST-NO SS-10GL13-3T SS-5GL13-3T SS-01GL13-3T

SPDT SS-10GL13D SS-5GL13D SS-01GL13D
SPST-NC SS-10GL13-2D SS-5GL13-2D SS-01GL13-2D
SPST-NO SS-10GL13-3D SS-5GL13-3D SS-01GL13-3D

SPDT
SPST-NC - SS-5GL13-F-2 SS-01GL13-F-2
SPST-NO - SS-5GL13-F-3 SS-01GL13-F-3

SPDT - SS-5GL13-FT SS-01GL13-FT
SPST-NC - SS-5GL13-F-2T SS-01GL13-F-2T
SPST-NO - SS-5GL13-F-3T SS-01GL13-F-3T

SPDT - SS-5GL13-FD SS-01GL13-FD
SPST-NC - SS-5GL13-F-2D SS-01GL13-F-2D
SPST-NO - SS-5GL13-F-3D SS-01GL13-F-3D

SPDT
SPST-NC - - SS-01GL13-E-2
SPST-NO - - SS-01GL13-E-3

SPDT - - SS-01GL13-ET
SPST-NC - - SS-01GL13-E-2T
SPST-NO - - SS-01GL13-E-3T

SPDT - - SS-01GL13-ED
SPST-NC - - SS-01GL13-E-2D
SPST-NO - - SS-01GL13-E-3D

0.49 N {50 gf}

0.16 N {16 gf}

0.08 N {8 gf}

0.39 N {40 gf}

0.12 N {12 gf}

0.06 N {6 gf}

0.49 N {50 gf}

0.16 N {16 gf}

0.08 N {8 gf}

Ratings

10.1 A 5 A 0.1 A

SS-10GL SS-5GL SS-01GL

- SS-5GL-F SS-01GL-F

- - SS-01GL-E

SS-10GL111 SS-5GL111 SS-01GL111

- SS-5GL111-F SS-01GL111-F

- - SS-01GL111-E

SS-10GL13 SS-5GL13 SS-01GL13

- SS-5GL13-F SS-01GL13-F

- - SS-01GL13-E

2

SS Subminiature Basic Switch

●SPDT ●SPST-NC ●SPST-NO

COM NC

COM NO

Separator (Sold Separately), Terminal Connector (Sold Separately) Refer to "Basic Switch Common Accessories"

Actuator Terminals Contact Form Maximum Operating Force (OF)

Solder terminals

Quick-connect

terminals (#110)

PCB terminals

Solder terminals

Hinge roller lever

Quick-connect

terminals (#110)

PCB terminals

Solder terminals

Quick-connect

terminals (#110)

PCB terminals

SPDT
SPST-NC SS-10GL2-2 SS-5GL2-2 SS-01GL2-2
SPST-NO SS-10GL2-3 SS-5GL2-3 SS-01GL2-3

SPDT SS-10GL2T SS-5GL2T SS-01GL2T
SPST-NC SS-10GL2-2T SS-5GL2-2T SS-01GL2-2T
SPST-NO SS-10GL2-3T SS-5GL2-3T SS-01GL2-3T

SPDT SS-10GL2D SS-5GL2D SS-01GL2D
SPST-NC SS-10GL2-2D SS-5GL2-2D SS-01GL2-2D
SPST-NO SS-10GL2-3D SS-5GL2-3D SS-01GL2-3D

SPDT
SPST-NC - SS-5GL2-F-2 SS-01GL2-F-2
SPST-NO - SS-5GL2-F-3 SS-01GL2-F-3

SPDT - SS-5GL2-FT SS-01GL2-FT
SPST-NC - SS-5GL2-F-2T SS-01GL2-F-2T
SPST-NO - SS-5GL2-F-3T SS-01GL2-F-3T

SPDT - SS-5GL2-FD SS-01GL2-FD
SPST-NC - SS-5GL2-F-2D SS-01GL2-F-2D
SPST-NO - SS-5GL2-F-3D SS-01GL2-F-3D

SPDT
SPST-NC - - SS-01GL2-E-2
SPST-NO - - SS-01GL2-E-3

SPDT - - SS-01GL2-ET
SPST-NC - - SS-01GL2-E-2T
SPST-NO - - SS-01GL2-E-3T

SPDT - - SS-01GL2-ED
SPST-NC - - SS-01GL2-E-2D
SPST-NO - - SS-01GL2-E-3D

0.49 N {50 gf}

0.16 N {16 gf}

0.08 N {8 gf}

Ratings

●Heat Resistant Models

Actuator Terminals Contact Form Maximum Operating Force (OF)

Pin plunger

Hinge lever

Long hinge lever

Simulated roller
lever

Hinge roller lever
(Roller material:
stainless steel)

Solder terminals

Quick-connect

terminals (#110)

PCB terminals SS-10D-T SS-5D-T SS-01D-T

Solder terminals

Quick-connect

terminals (#110)

PCB terminals SS-10GLD-T SS-5GLD-T SS-01GLD-T

Solder terminals

Quick-connect

terminals (#110)

PCB terminals SS-10GL111D-T SS-5GL111D-T

Solder terminals

Quick-connect

terminals (#110)

PCB terminals SS-10GL13D-T SS-5GL13D-T SS-01GL13D-T

Solder terminals

Quick-connect

terminals (#110)

PCB terminals SS-10GL02D-T SS-5GL02D-T SS-01GL02D-T

SPDT

1.47 N {150 gf}

0.49 N {50 gf}

0.39 N {40 gf}

0.49 N {50 gf}

0.49 N {50 gf}

Ratings

10.1 A 5 A 0.1 A

SS-10GL2 SS-5GL2 SS-01GL2

- SS-5GL2-F SS-01GL2-F

- - SS-01GL2-E

10.1 A 5 A 0.1 A

SS-10-T SS-5-T SS-01-T

SS-10T-T SS-5T-T SS-01T-T

SS-10GL-T SS-5GL-T SS-01GL-T

SS-10GLT-T SS-5GLT-T SS-01GLT-T

SS-10GL111-T SS-5GL111-T SS-01GL111-T

SS-10GL111T-T SS-5GL111T-T SS-01GL111T-T

SS-01GL111D-T

SS-10GL13-T SS-5GL13-T SS-01GL13-T

SS-10GL13T-T SS-5GL13T-T SS-01GL13T-T

SS-10GL02-T SS-5GL02-T SS-01GL02-T

SS-10GL02T-T SS-5GL02T-T SS-01GL02T-T

S
S

Contact Form Contact Specifications

COM NO NC

Item Model SS-10 models SS-5 models SS-01 models

Specification Rivet Crossbar

Contact

Inrush
current

Minimum applicable load
(reference value)*

* Please refer to "●Using Micro Loads" in "Precautions" for more

Material Silver alloy Silver Gold alloy

Gap (standard value) 0.5 mm 0.25 mm

NC 20 A max. 1 A max.

NO 15 A max. 10 A max. 1 A max.

5 VDC 160 mA 5 VDC 1 mA

information on the minimum applicable load.

3

SS Subminiature Basic Switch

Characteristics

Note. The data given above are initial values.
*1. The values for dielectric strength shown are for models with a Separator (refer to "Micro Switch

Common Accessories").

*2. The values are at Free Position and Total Travel Position values for pin plunger, and Total Travel

Position value for lever. Close or open circuit of the contact is 1ms max.

*3. For testing conditions, consult your OMRON sales representative.

Item Model SS-10 models SS-5 models SS-01 models
Permissible operating speed 0.1 mm to 1 m/s (for pin plunger models)

Permissible
operating
frequency

Mechanical 400 operations/min

Electrical 60 operations/min

Insulation resistance 100 MΩ min. (at 500 VDC with insulation tester)

Contact resistance (initial
value)

OF 1.47 N models 30 mΩ max. 50 mΩ max.
OF 0.49 N models - 50 mΩ max. 100 mΩ max.
OF 0.25 N models - 150 mΩ max.

Dielectric
strength *1

Between terminals of the same
polarity

1,000 VAC 50/60 Hz for 1 min

600 VAC

50/60 Hz for

1 min

Between current-carrying metal
parts and ground

1,500 VAC 50/60 Hz for 1 min

Between each terminals and non­current-carrying metal parts

1,500 VAC 50/60 Hz for 1 min

Vibration
resistance *2

Malfunction 10 to 55 Hz, 1.5 mm double amplitude

Shock
resistance

Durability

OF 1.47 N models 1,000 m/s2 {approx. 100G} max.
OF 0.49 N models 500 m/s2 {approx. 50G} max.
OF 0.25 N models 500 m/s2 {approx. 50G} max.

Malfunction *2

OF 1.47 N models 300 m/s2 {approx. 30G} max.
OF 0.49 N models 200 m/s2 {approx. 20G} max.
OF 0.25 N models 200 m/s2 {approx. 20G} max.

Durability *3

Mechanical

10,000,000 operations

min.

(60 operations/min)

30,000,000 operations min.

(60 operations/min)

Electrical

50,000 operations min.

(30 operations/min)

200,000 operations min.

(30 operations/min)
Degree of protection IEC IP40
Degree of protection against electric shock Class I
Proof tracking index (PTI) 175

Ambient operating temperature

-25°C to

+

85°C (at ambient humidity of 60% max.)

(with no icing or condensation)
Ambient operating humidity 85% max. (for +5°C to +35°C)
Weight Approx. 1.6g (pin plunger models)

Ratings

Note. The above rating values apply under the

following test conditions.
(1) Ambient temperature: 20±2°C
(2) Ambient humidity: 65±5%
(3) Operating frequency: 30 operations/min

Approved Safety Standards

Models shown in the "List of Models" are
UL and CSA approved models.

Note. Note that heat resistant models are not

standard approved models.

UL

(UL1054)

/CSA

(CSA C22.2 No.55)

Consult your OMRON sales
representative for specific models
with VDE standard approvals.

VDE (EN61058-1)

Testing conditions: 5E4 (50,000 operations)

T85 (0°C to 85°C)

Item

Resistive load

Model Rated voltage

SS-10 models 250 VAC 10.1 A

SS-5 models

125 VAC
250 VAC

5 A
3 A

SS-01 models

125 VAC 0.1 A

30 VDC 0.1 A

Rated voltage Model SS-10 SS-5 SS-01

125 VAC
250 VAC

-

10.1 A

5 A
3 A

0.1 A

-

30 VDC - - 0.1 A

Rated voltage Model SS-10 SS-5

250 VAC 10 A 5 A

●Solder terminals ●Quick connect terminals (#110) ●PCB terminals

<PCB Mounting Dimensions (Reference)>

2.9

1.6 0.5

8.8

7.3

19.8

3.2

6.4

6.4

3-1.6 dia. holes

9.5

±0.1

2.9

1.6

8.8

7.3

19.8

3.2

2.8

7.1

10.6

3-1.2

dia. holes

9.5

±0.1

0.5

16.1

±0.1

8.8

+0.15

-0.05

3-1.35~1.5 dia.

(1.6)

S
S

Terminals/Appearances (Unit: mm)

Mounting Holes (Unit: mm)

2-2.4 dia. mounting holes
or M2.3 screw holes

4

9.5

±0.1

2.9

1.6

3.3

8.8

9.5

19.8

0.5

7.3

±0.1

3.2

0.6

7.0

0.5

1.2

t=0.5

SS Subminiature Basic Switch

●Pin plunger
SS-10
SS-5 (-F)
SS-01 (-E, -F)

Model

Operating Characteristics

SS-10

SS-5
SS-01

SS-5-F
SS-01-F

SS-01-E

Operating Force OF Max.
Releasing Force RF Min.

1.47 N {150 gf}

0.25 N {25 gf}

1.47 N {150 gf}

0.25 N {25 gf}

0.49 N {50 gf}

0.04 N {4 gf}

0.25 N {25 gf}

0.02 N {2 gf}

Pretravel PT Max.
Overtravel OT Min.
Movement Differential MD Max.

0.6 mm

0.4 mm

0.12 mm

0.5 mm

0.5 mm

0.1 mm

0.5 mm

0.5 mm

0.1 mm

0.5 mm

0.5 mm

0.1 mm

Operating Position OP 8.4±0.5 mm

●Hinge lever
SS-10GL
SS-5GL (-F)
SS-01GL (-E, -F)

2.9

OP

FP

1.6

8.8

5.1

7.3

19.8

3.2

3.6

6.4

6.4

3-1.6 dia. holes

9.5

±0.1

2.5

±0.07

dia.

2.35

+0.075

dia. holes

-0.05

2.35

+0.075

-0.05

9.5

10.2

14.5

2.5

A

t=0.3*

* Stainless-steel lever

0.5

Model

Operating Characteristics

SS-10GL

SS-5GL
SS-01GL

SS-5GL-F
SS-01GL-F

SS-01GL-E

Operating Force OF Max.
Releasing Force RF Min.

0.49 N {50 gf}

0.06 N {6 gf}

0.49 N {50 gf}

0.06 N {6 gf}

0.16 N {16 gf}

0.02 N {2 gf}

0.08 N {8 gf}

0.01 N {1 gf}

(reference value)

Overtravel OT Min.
Movement Differential MD Max.

1.0 mm

1.0 mm

1.2 mm

0.8 mm

1.2 mm

0.8 mm

1.2 mm

0.8 mm

Free Position FP Max.
Operating Position OP

13.6 mm

8.8±0.8 mm

Note. The indicated reference values of RF are for cases

where the lever weight is not applied to the plunger.

C

NO

NC

2.9

OP

FP

1.6

8.8

5.1

7.3

19.8

3.2

3.6

6.4

6.4

3-1.6 dia. holes

9.5

±0.1

2.5

±0.07

dia.

2.35

+0.075

dia. holes

-0.05

2.35

+0.075

-0.05

9.5

10.2

22.6

2.5

A

t=0.3*

* Stainless-steel lever

0.5

●Long hinge lever
SS-10GL111
SS-5GL111 (-F)
SS-01GL111 (-E, -F)

Model

Operating Characteristics

SS-10GL111

SS-5GL111
SS-01GL111

SS-5GL111-F
SS-01GL111-F

SS-01GL111-E

Operating Force OF Max.
Releasing Force RF Min.

0.39 N {40 gf}

0.03 N {3 gf}

0.39 N {40 gf}

0.03 N {3 gf}

0.12 N {12 gf}

0.02 N {2 gf}

(reference value)

0.06 N {6 gf}

0.003 N {0.3 gf}

(reference value)

Overtravel OT Min.
Movement Differential MD Max.

1.2 mm

1.2 mm

1.2 mm

1.2 mm

1.2 mm

1.2 mm

1.2 mm

1.2 mm

Free Position FP Max. 16.8 mm

Operating Position OP 8.8±1.5 mm 8.8±2 mm

Note. The indicated reference values of RF are for cases

where the lever weight is not applied to the plunger.

Dimensions (Unit: mm) and Operating Characteristics

The illustrations and drawings are for solder terminals models.

Refer to "Terminals/Appearances" of the previous page for details on models with quick connect terminals (#110) or PCB terminals.

PT

OP

2.9

2

+0.075

2.35

-0.05

2.5

±0.07

2.5

dia.

1.6 0.5

8.8

9.5

5.1

19.8

7.5

A

10.2

9.5

+0.075

dia. holes

2.35

-0.05

7.3

±0.1

3.2

3.2

6.4

6.4

3-1.6 dia. holes

S
S

Note 1. Unless otherwise specified, a tolerance of ±0.4 mm applies to all dimensions.
Note 2. The operating characteristics are for operation in the A direction ( ).

5

SS Subminiature Basic Switch

●Simulated roller lever
SS-10GL13
SS-5GL13 (-F)
SS-01GL13 (-E, -F)

Model

Operating Characteristics

SS-10GL13

SS-5GL13
SS-01GL13

SS-5GL13-F
SS-01GL13-F

SS-01GL13-E

Operating Force OF Max.
Releasing Force RF Min.

0.49 N {50 gf}

0.06 N {6 gf}

0.49 N {50 gf}

0.06 N {6 gf}

0.16 N {16 gf}

0.02 N {2 gf}

0.08 N {8 gf}

0.01 N {1 gf}

(reference value)

Overtravel OT Min.
Movement Differential MD Max.

1.0 mm

1.0 mm

1.2 mm

0.8 mm

1.2 mm

0.8 mm

1.2 mm

0.8 mm

Free Position FP Max.
Operating Position OP

15.5 mm

10.7

±

0.8 mm

Note. The indicated reference values of RF are for cases

where the lever weight is not applied to the plunger.

Model

Operating Characteristics

SS-10GL2

SS-5GL2
SS-01GL2

SS-5GL2-F
SS-01GL2-F

SS-01GL2-E

Operating Force OF Max.
Releasing Force RF Min.

0.49 N {50 gf}

0.06 N {6 gf}

0.49 N {50 gf}

0.06 N {6 gf}

0.16 N {16 gf}

0.02 N {2 gf}

0.08 N {8 gf}

0.01 N {1 gf}

(reference value)

Overtravel OT Min.
Movement Differential MD Max.

1.0 mm

1.0 mm

1.2 mm

0.8 mm

1.2 mm

0.8 mm

1.2 mm

0.8 mm

Free Position FP Max.
Operating Position OP

19.3mm

14.5

±

0.8mm

Note. The indicated reference values of RF are for cases

where the lever weight is not applied to the plunger.

●Hinge roller lever
SS-10GL2
SS-5GL2 (-F)
SS-01GL2 (-E, -F)

A

t=0.3*

15.8

R1.3

3.6

S
S

+0.075

2.35

-0.05

2.9

2.5

±0.07

2.5

dia.

1.6

* Stainless-steel lever

t=0.3 * 1

+0.075

2.35

-0.05

2.9

2.5

±0.07

2.5

dia.

1.6

*1. Stainless-steel lever
*2. Polyacetal resin roller

FP

OP

10.2

9.5

6.4

+0.075

dia. holes

2.35

-0.05

±0.1

14.5

±0.1

0.5

7.3

A

FP

OP

10.2

9.5

+0.075

2.35

dia. holes

-0.05

0.5

7.3

8.8

9.5

5.1

19.8

8.8

9.5

5.1

19.8

3.2

6.4

4.8x3.2 dia.

3.2

6.4

3-1.6 dia. holes

*2

6.4

3-1.6 dia. holes

Note 1. Unless otherwise specified, a tolerance of ±0.4 mm applies to all dimensions.
Note 2. The operating characteristics are for operation in the A direction ( ).

6

SS Subminiature Basic Switch

1

2,000,000

30

24

12

5

0

1 10 100 1,000

Current (mA)

0.1

1 mA

Operating
range for
general-load
models
SS-5
SS-10

Operating range for
micro-load model
SS-01

26 mA0.16mA

100 mA 160mA

100 mA

Voltage (V)

Precautions

★Please refer to "Common Precautions" for correct use.

Cautions Correct Use

●Soldering

• Complete the soldering at the iron tip temperature below

350°C within 5 seconds, and do not apply any external force

for 1 minute after soldering. Soldering at an excessively high

temperature or soldering for more than 5 seconds may

deteriorate the characteristics of the Switch.

• Be sure to apply only the minimum required amount of flux.

Switch may have contact failures if flux intrudes into the

interior of the Switch.

• If the PCB terminal models are soldered in the solder bath, flux

will permeate inside the Switch and cause contact failure.

Therefore, manually solder the PCB terminal.

●Mounting

• Use M2.3 mounting screw with plane washers or spring

washers to securely mount the Switch. Tighten the screws to a

torque of 0.23 to 0.26 N·m {2.3 to 2.7 kgf·cm}.

• Mount the Switch onto a flat surface. Mounting on an uneven

surface may cause deformation of the Switch, resulting in

faulty operation or breakage in the housing.

●Using Micro Loads

Using a model for ordinary loads to open or close the contact of

a micro load circuit may result in faulty contact. Use models that

operate in the following range. However, even when using micro

load models within the following operating range, if inrush

current occurs when the contact is opened or closed, it may

increase the contact wear and so decrease durability. Therefore,

insert a contact protection circuit where necessary. The N-level

reference value applies for the minimum applicable load. This

value indicates the malfunction reference level for the reliability

level of 60% (λ

60).

(JIS C5003)
The equation, λ

60=0.5×10

-6

/operation indicates that the

estimated malfunction rate is less than operations with

a reliability level of 60%.

S
S

7

SS Subminiature Basic Switch

• Application examples provided in this document are for reference only. In actual applications, confirm equipment functions and safety before using the product.

• Consult your OMRON representative before using the product under conditions which are not described in the manual or applying the product to nuclear control systems, railroad

systems, aviation systems, vehicles, combustion systems, medical equipment, amusement machines, safety equipment, and other systems or equipment that may have a serious
influence on lives and property if used improperly. Make sure that the ratings and performance characteristics of the product provide a margin of safety for the system or
equipment, and be sure to provide the system or equipment with double safety mechanisms.

OMRON Corporation

ELECTRONIC AND MECHANICAL COMPONENTS COMPANY

Contact: www.omron.com/ecb

Cat. No.B032-E1-13

0812(0207)(O)

Note: Do not use this document to operate the Unit.

S
S

8