Omron HL-5000 DATASHEET
General-purpose Limit Switch HL-5000
Economical, Miniature Limit Switch
Boasting Rigid Construction
Highly rigid construction (head and cover snugly fit
in box).
Dustproof and drip-proof construction.
Smooth operation with greater OT.
Easy-to-wire conduit opening design.
Models with grounding terminals conform to the CE
marking.
Ordering Information
Model Number Legend
HL-5jjj
123
1. Actuators
000: Roller lever
030: Adjustable roller lever
050: Adjustable rod lever
100: Sealed plunger
200: Sealed roller plunger
300: Coil spring
500: Remote control wire
2. Ground Terminal Specifications
Blank: Without ground terminal
G: With ground terminal/M5 tapping on the rear side
3. Contact
Blank: Standard (silver rivet contact)
A: Gold plating
List of Models
Actuator Roller lever Adjustable
roller lever
Model HL-5000 HL-5030 HL-5050 HL-5100 HL-5200 HL-5300
Note: HL-5000 Limit Switches are offered with a choice of ground terminal/M5 tapping on the rear side conforming to various standards.
When placing an order, add the code to the model number to indicate if ground terminal/M5 tapping on the rear side is required.
-G: with ground terminal/M5 tapping on the rear side
Adjustable
rod lever
Sealed
plunger
Sealed roller
plunger
Coil spring
1
HL-5000
HL-5000
Specifications
Ratings
Rated voltage Non-inductive load Inductive load
Resistive load Lamp load Inductive load Motor load
NC NO NC NO NC NO NC NO
125 VAC 5 A 1.5 A 0.7 A 3 A 2 A 1 A
250 VAC 5 A 1 A 0.5 A 3 A 1.5 A 0.8 A
12 VDC 5 A 3 A 4 A 3 A
24 VDC 5 A 3 A 4 A 3 A
Inrush current
Note: 1. The above figures are for standard currents.
2. Inductive loads have a power factor of 0.4 min. (AC) and a time constant of 7 ms max. (DC).
3. Lamp load has an inrush current of 10 times the steady-state current.
4. Motor load has an inrush current of 6 times the steady-state current.
NC 24 A max.
NO 12 A max.
Characteristics
Degree of protection IP65
Life expectancy (see note 3) Mechanical: 10,000,000 operations min. (under rated conditions)
Operating speed 5 mm/s to 0.5 m/s (HL-5000)
Operating frequency Mechanical: 120 operations/min
Insulation resistance 100 MΩ min. (at 500 VDC)
Contact resistance 25 mΩ max. (initial value)
Dielectric strength 1,000 VAC, 50/60 Hz for 1 min between terminals of the same polarity
Rated frequency 50/60 Hz
Vibration resistance Malfunction: 10 to 55 Hz, 1.5-mm double amplitude
Shock resistance Destruction:1,000 m/s2 min.
Ambient temperature Operating: –5°C to 65°C (with no icing)
Ambient humidity Operating: 95% max.
Weight Approx. 130 to 190 g
Note: 1. The above figures are initial values.
2. The above characteristics may vary depending on the model. For further details, contact your OMRON sales representative.
3. Life expectancy values are calculated at an operating temperature of 5°C to 35°C, and an operating humidity of 40% to 70%. Contact your OMRON sales representative for more detailed information on other operating environments.
Contact Form
(4) (3)
NO
Electrical: See the following Electrical Life Expectancy.
Electrical: 30 operations/min
1,500 VAC, 50/60 Hz for 1 min between current-carrying metal parts and ground, and between
each terminal and non-current-carrying metal part
Malfunction:300 m/s
NO
2
min.
NC
(1) (2)
NC
2
HL-5000
Operating Characteristics
Model
OF max. 7.35 N 7.35 N 7.35 N 8.83 N 8.83 N 1.47 N 19.61 N
RF min. 0.98 N 0.98 N 0.98 N 1.47 N 1.47 N --- 1.96 N
PT max. 20° 20° 20° 1.5 mm 1.5 mm 30 mm 1.5 mm
OT min. 50° 50° 50° 4 mm 4 mm --- 4.5 mm
MD max. 12° 12° 12° 1 mm 1 mm --- 0.7 mm
OP --- 30±0.8 mm 40±0.8 mm --- ---
Note: 1. Measured with the types of the 31.5-mm arm or rod length.
2. OF and RF measured at the arm length of 75 mm for HL-5030, and 145 mm for HL-5050 (reference values).
HL-5000 HL-5030
Model
OF 3.09 N 1.60 N
RF 0.41 N 0.22 N
(see note)
HL-5030 HL-5050
HL-5050
(see note)
HL-5100 HL-5200 HL-5300 HL-5500
Engineering Data
Reference Data
Electrical Life Expectancy (cosφ=1)
Operating temperature: 5°C to 30°C
Operating humidity: 40% to 70%
HL-5000
Operating frequency:
30 operations/min
125 VAC (cosφ = 1)
4
Life expectancy (x 10 operations)
Switching current (A)
3
Loading...