Omron BP769CAN, HEM-7320T-CACS Instruction Manual
English
Français
3124754-8A
Blood Pressure Monitor / Tensiomètre
Model / Modèle BP769CAN
Instruction Manual / Guide de l’utilisateur
Monitor
AC Adapter
Adaptateur c.a.
Instruction Manual
Easy-Wrap ComFit Cuff
Le produit inclut :
Tensiomètre
Guide de l’utilisateur
Quick Start Guide
Guide de démarrage rapide
Brassard facile à enrouler
ComFit
4 “AA” batteries
4 piles “AA”
Blood Pressure Monitor
GETTING
STARTED
BP769CAN
Product includes:
1 2
b
b
a
A
L
M
I
D
I
c
Table Of Contents
Introduction ...................................................1
Definitions / Symbols ....................................2
Important Safety Information .......................4
1. Know Your Monitor ............................................. 9
Display Symbols ......................................10
2. Preparation ..........................................................13
2.1 Battery Installation ...............................13
2.2 Using the AC adapter ..........................14
2.3 Setting the Date and Time ..................15
2.4 Applying the Arm Cuff .........................17
2.5 Before Taking a Measurement ............18
2.6 How to Sit Correctly ............................19
3. Using Your Monitor without
a Smart Device ....................................................20
3.1 Taking a Measurement .......................20
4. Using Your Monitor with a Smart Device .....23
4.1 Pairing Your Monitor With
a Smart Device ....................................23
4.2 Taking a Measurement .......................26
5. Using the Memory Function ............................28
5.1 Viewing Your Readings Stored in
the Memory .........................................28
5.2 Viewing the Average Value .................29
5.3 Deleting All the Readings Stored in
the Memory .........................................30
6. Other Settings .....................................................31
6.1 Turning Bluetooth “OFF” ..................... 31
6.2 Turning
Bluetooth
“ON” ..................... 32
6.3 Restoring Your Monitor to the
Default Setting .................................... 33
7. Error Messages and Troubleshooting .........34
7.1 Error Messages .................................. 34
7.2 Troubleshooting .................................. 36
8. Maintenance ........................................................ 37
8.1 Maintenance ....................................... 37
8.2 Storage ............................................... 37
8.3 Cleaning ............................................. 38
8.4 Disposal .............................................. 38
9. Optional Accessories .......................................39
10. Specifications .....................................................40
11. FCC/IC Statement ..............................................42
12. Limited Warranty ...............................................43
13. Guidance and Manufacturer’s
Declaration ..........................................................44
1
EN
Introduction
Introduction
Thank you for purchasing the OMRON BP769CAN Blood Pressure Monitor.
This new blood pressure monitor uses the oscillometric method of blood pressure measurement. This
means this monitor detects your blood movement through your brachial artery and converts the movements
into a digital reading. An oscillometric monitor does not need a stethoscope so this monitor is simple to use.
Safety Instructions
This instruction manual provides you with important information about the OMRON BP769CAN Blood
Pressure Monitor. To ensure the safe and proper use of this monitor, READ and UNDERSTAND all of the
safety and operating instructions. If you do not understand these instructions or have any questions,
contact 1-800-634-4350 before attempting to use this monitor. For specific information about your
own blood pressure, consult with your physician.
Intended Use
The device is a digital monitor intended for use in measuring blood pressure and pulse rate in adult patient
population. The device detects the appearance of irregular heartbeats during measurement and gives a
warning signal with readings.
Receiving and Inspection
Remove this monitor from the packaging and inspect for damage. If this monitor is damaged, DO NOT USE
and contact 1-800-634-4350.
Contraindications
• This monitor is contraindicated for use in ambulatory environments.
• This monitor is contraindicated for use on aircraft.
2
Definitions / Symbols
Warning
Indicates a potentially hazardous
situation, which if not avoided,
could result in death or serious
injury.
Temperature limitation
Caution
Indicates a potentially hazardous
situation, which if not avoided,
may result in minor or moderate
injury to the user or patient, or
cause damage to the equipment
or other property.
Humidity limitation
NOTE
Provides additional information to
clarify a point in the text.
Atmospheric pressure limitation
Follow this instruction manual
thoroughly for your safety.
Artery mark
Consult Instructions for Use.
Identifier of cuffs compatible for
the monitor
Applied part - Type BF
Degree of protection against
electric shock (leakage current)
Manufacturer
LOT number Catalogue number
or
or
3
Definitions / Symbols
EN
Class II equipment. Protection
against electric shock
Serial number
For indoor use only
The device is protected against
solid foreign objects of 12.5 mm
diameter and greater such as a
finger.
Indication of connector polarity
The device is protected against
solid foreign objects of 12.5 mm
diameter and greater such as a
finger, and against vertically falling
water drops which may cause
issues during a normal operation.
Alternating current
To indicate generally elevated,
potentially hazardous, levels of
nonionizing radiation, or to
indicate equipment or systems
e.g. in the medical electrical area
that include RF transmitters or
that intentionally apply RF
electromagnetic energy for
diagnosis or treatment.
Direct current
Efficiency Level of power supply
IP20
IP21
4
Important Safety Information
Please read the Important Safety Information in this instruction manual before using this monitor.
Please follow this instruction manual thoroughly for your safety.
Please keep for future reference. For specific information about your own blood pressure, CONSULT WITH YOUR
PHYSICIAN.
Warning
• DO NOT adjust medication based on readings from this blood pressure monitor. Take medication as prescribed
by your physician. ONLY a physician is qualified to diagnose and treat high blood pressure.
• DO NOT use this monitor on an injured arm or an arm under medical treatment.
• DO NOT apply the arm cuff on your arm while on an intravenous drip or blood transfusion.
• ONLY inflate the arm cuff when it is applied on your upper arm.
• Consult with your physician before using this monitor on an arm with an arterio-venous (A-V) shunt.
• DO NOT use this monitor with other medical electrical (ME) equipment simultaneously.
• DO NOT use this monitor in areas of high frequency (HF) surgical equipment, magnetic resonance imaging (MRI)
equipment, computerized tomography (CT) scanners or in oxygen rich environments.
• Consult with your physician before using this monitor if you have common arrhythmias such as atrial or
ventricular premature beats or atrial fibrillation; arterial sclerosis; poor perfusion; diabetes; pregnancy;
pre-eclampsia or renal disease.
NOTE that any of these conditions in addition to patient motion, trembling, or shivering may affect the
measurement reading.
• The air tube or the AC adapter cable may cause accidental strangulation in infants, toddlers or children.
• This product contains small parts that may cause a choking hazard if swallowed by infants, toddlers or children.
• This product emits radio frequencies (RF) in the 2.4 GHz band. DO NOT use this product in locations where RF
is restricted, such as on an aircraft or in hospitals. Turn off the Bluetooth feature in this monitor, remove batteries
and/or unplug the AC adapter in those areas. For further information on potential restrictions refer to
documentation on the Bluetooth usage by the FCC/IC.
5
Important Safety Information
EN
AC Adapter Handling and Usage
• DO NOT use the AC adapter if this monitor or the AC adapter cable is damaged. If this monitor or the cable is
damaged, turn off the power and unplug the AC adapter immediately.
• Plug the AC adapter into the appropriate voltage outlet. DO NOT use in a multi-outlet plug.
• NEVER plug in or unplug the AC adapter from the electric outlet with wet hands.
• DO NOT disassemble or attempt to repair the AC adapter.
Battery Handling and Usage
• Keep batteries out of the reach of infants, toddlers or children.
Caution
• NEVER diagnose or treat yourself based on your readings. ALWAYS consult with your physician.
• DO NOT use this monitor on infants, toddlers, children or persons who cannot express themselves.
• Stop using this monitor and consult with your physician if you experience skin irritation or discomfort.
• Consult with your physician before using this monitor if you have had a mastectomy.
• Consult with your physician before using this monitor if you have severe blood flow problems or blood disorders
as cuff inflation can cause bruising.
• DO NOT take measurements more often than necessary because bruising, due to blood flow interference, may
occur.
• Remove the arm cuff if it does not start deflating during a measurement.
• DO NOT use this monitor for any purpose other than measuring blood pressure.
• DO NOT use a mobile phone or other electrical devices that emit electromagnetic fields near this monitor except
when transferring your readings to your smart device. This may result in incorrect operation of this monitor.
• DO NOT disassemble or attempt to repair this monitor or other components. This may cause an inaccurate
reading.
• DO NOT use in a location where there is moisture or a risk of water splashing this monitor. This may damage this
monitor.
6
Important Safety Information
• DO NOT use this monitor in a moving vehicle such as in a car.
• DO NOT drop or subject this monitor to strong shocks or vibrations.
• DO NOT use this monitor in places with high or low humidity or high or low temperatures. Refer to chapter 10,
“Specifications”.
• Ensure this monitor is not impairing blood circulation by observing the arm while measurement is occurring.
• DO NOT use this monitor in high-use environments such as medical clinics or physician offices.
• Avoid bathing, drinking alcohol or caffeine, smoking, exercising and eating for at least 30 minutes before taking a
measurement.
• Rest for at least 5 minutes before taking a measurement.
• Remove tight-fitting or thick clothing from your arm while taking a measurement.
• Remain still and DO NOT talk while taking a measurement.
• ONLY use this monitor on persons whose arm circumference is within the specified range of the cuff.
• Ensure that the monitor has acclimated to room temperature before taking a measurement. Taking a
measurement after an extreme temperature change could lead to an inaccurate reading.
• DO NOT crease the arm cuff or the air tube excessively.
• DO NOT fold or kink the air tube while taking a measurement. This may cause an injury by interrupting blood
flow.
• To unplug the air plug, pull on the plastic air plug at the base of the tube, not the tube itself.
• ONLY use the AC adapter, arm cuff, batteries and accessories specified for this monitor. Use of unsupported AC
adapters, arm cuffs and batteries may damage and/or may be hazardous to this monitor.
• ONLY use the approved arm cuff for this monitor. Use of other arm cuffs may result in incorrect readings.
• Inflating to a higher pressure than necessary may result in bruising of the arm where the cuff is applied.
NOTE: please refer to “What to do if your systolic pressure is more than 210 mmHg” (page 21) of this instruction
manual for additional information.
• Read and follow the “Important information regarding Electro Magnetic Compatibility (EMC)” in chapter 13 of this
manual.
• Dispose of the monitor, other components and optional accessories according to applicable local regulations.
Unlawful disposal may cause environmental pollution.
7
Important Safety Information
EN
Data Transmission
• DO NOT replace batteries or unplug the AC adapter while your readings are being transferred to your smart
device. This may result in incorrect operation of this monitor and failure to transfer your blood pressure data.
• When using this monitor for wireless communications, DO NOT place integrated circuit cards, magnets, metal
objects or other devices that emit electromagnetic fields near this monitor. This may result in incorrect operation
of this monitor or damage to the data.
AC Adapter Handling and Usage
• Fully insert the AC adapter into the outlet.
• When unplugging the AC adapter from the outlet, be sure to safely pull from the AC adapter. DO NOT pull from
the AC adapter cable.
• When handling the AC adapter cable:
• Wipe any dust off of the AC adapter.
• Unplug the AC adapter when not in use.
• Unplug the AC adapter before cleaning this monitor.
DO NOT damage it. DO NOT break it.
DO NOT tamper with it. DO NOT forcibly bend or pull it.
DO NOT twist it. DO NOT use it if it is gathered in a bundle.
DO NOT pinch it. DO NOT place it under heavy objects.
8
Important Safety Information
Battery Handling and Usage
• DO NOT insert batteries with their polarities incorrectly aligned.
• ONLY use 4 “AA” alkaline or manganese batteries with this monitor. DO NOT use other types of batteries. DO
NOT use new and used batteries together.
• Remove batteries if this monitor will not be used for three months or more.
• If battery fluid should get in your eyes, immediately rinse with plenty of clean water. Consult with your physician
immediately.
• If battery fluid should get on your skin, wash your skin immediately with plenty of clean, lukewarm water. If
irritation, injury or pain persists, consult with your physician.
• DO NOT use batteries after their expiration date.
• Periodically check batteries to ensure they are in good working condition.
9
EN
1. Know Your Monitor
* Blood pressure level indicator (color)
If your systolic blood pressure is 135 mmHg or above and/or the diastolic blood
pressure is 85 mmHg or above, the blood pressure level indicator (color) will light in
“orange” with readings. If readings are within the standard range, the blood pressure
level indicator (color) will light in “green”.
2013 ESH/ESC Guidelines for the management of arterial hypertension
Definitions of hypertension for office and home blood pressure levels
These are from statistical values for blood pressure
.
Monitor
Air jack
Blood pressure level indicator (color) *
Connection button
User
ID selection switch
Display
Memory button
START/STOP button
Up/Down buttons
Battery compartment
AC adapter jack
Arm cuff
Arm cuff (Arm circumference
9” - 17” (22 - 42 cm))
Air plug
Air tube
Office Home
Systolic Blood Pressure 140 mmHg 135 mmHg
Diastolic Blood Pressure 90 mmHg 85 mmHg
Open the rear cover page to read the following:
The letter identifiers on the rear cover page correspond to those in the body of this page.
ABCDEFGHIJKLM
10
1. Know Your Monitor
Display Symbols
Memory symbol
Appears when you press the memory button along with the stored readings.
User ID symbol
The user ID number appears when selecting the user with user ID selection switch.
Average value symbol
Appears when you press and hold the memory button for more than 3 seconds. The
most recent average value appears on the display.
Systolic blood pressure
Diastolic blood pressure
Connection symbol
Appears when transferring the data or pairing with your smart device.
Memory full symbol
Flashes when the data needs transferring because the stored memory is almost full.
When the memory is full, transfer your readings immediately before your monitor deletes
the oldest readings. Maximum internal memory is for 60 readings.
OK symbol
Flashes when your monitor is connected or readings are transferred successfully.
Heartbeat symbol
Flashes while taking a measurement.
N
O
P
Q
RST
U
V
11
1. Know Your Monitor
EN
Date and Time display
Movement error symbol
Appears when your body is moving during a measurement. If the movement symbol
appears, remove the arm cuff, and wait for 2 to 3 minutes. After 2 to 3 minutes, remain
still and take another measurement.
Irregular heartbeat symbol
When your monitor detects an irregular rhythm two or
more times during a measurement, the irregular
heartbeat symbol appears on the display along with
readings.
An irregular heartbeat rhythm is defined as a rhythm
that is 25% less or 25% more than the average rhythm
detected while the monitor is measuring the systolic
and diastolic blood pressure.
If the irregular heartbeat symbol appears with readings, consult with and follow the
directions of your physician.
Blood pressure level indicator (bar)
The blood pressure level indicator (bar) displays the range of your systolic blood
pressure and diastolic blood pressure visually.
Battery symbol (low) ( )
Appears when batteries are low.
Battery symbol (depleted) ( )
Appears when batteries are depleted.
W
X
Normal Heartbeat
Irregular Heartbeat
Pulse
Blood pressure
Blood pressure
Short
Long
Pulse
Y
Z
AA
12
1. Know Your Monitor
Deflation symbol
Flashes while your monitor is deflating the arm cuff.
Pulse display / Memory number
Pulse rate appears after the measurement.
When pressing the memory button, the memory number appears for approximately one
second before the pulse rate appears on the display.
AB
AC
13
EN
2. Preparation
2.1
Battery Installation
1. Remove the battery cover.
2. Insert 4 “AA” batteries as
indicated in the battery
compartment.
3. Replace the battery cover.
NOTES:
• When the depleted battery symbol “ ” appears on the display, turn your monitor off, then replace all
batteries at the same time. Long life alkaline batteries are recommended.
• After replacing batteries, “-/ - -:--” appears on the date and time display during or after measurement.
Before taking measurements, your monitor needs to be set with the correct date and time.
Measurements taken without date and time settings do not sync. For setting the date and time
manually, refer to section 2.3.
• The readings continue to be stored in memory even after batteries are replaced.
• The supplied batteries may have a shorter life than new batteries.
• Disposal of used batteries should be carried out in accordance with local regulations.
Loading...