Omron E2EQ DATASHEET
Spatter Immune Proximity Sensors
E2EQ
A Series of Spatter-resistant
Proximity Sensors with a
Teflon-coated Metal Housing
* Teflon is a registered trademark of Dupont Company and
Mitsui Dupont Chemical Company for their fluoride resin.
Ordering Information
Sensors
● Pre-wired Models
Extended-distance type
Shape Sensing distance
Shielded
M12
M18
M30
4mm
8mm
15mm
Output
specifications
DC 2-wire
Operating
status
NO
E2EQ-X4X1
E2EQ-X8X1
E2EQ-X15X1
Model
E2EQ
Standard
Shape Sensing distance
M12
Shielded
M18
M30
● Plug-in Models
Extended-distance type
Shape Sensing distance
M12
Shielded
M18
M30
Standard
Standard Sensing distance
M12
Shielded
M18
M30
3mm
7mm
4mm
3mm
7mm
10mm
8mm
10mm
15mm
Output
specifications
DC 2-wire
Output
specifications
DC 2-wire models
(3) and (4) Pin
arrangement
Output
specifications
DC 2-wire models
(1) and (4) Pin arrangement
Operating
status
NO
Operating
status
NO
Operating
status
NO
Model
E2EQ-X3D1
E2EQ-X7D1
E2EQ-X10D1
Model
E2EQ-X4X1-M1J
E2EQ-X8X1-M1J
E2EQ-X15X1-M1J
Model
E2EQ-X3D1-M1GJ
E2EQ-X7D1-M1GJ
E2EQ-X10D1-M1GJ
D-171E2EQ
Accessories (Order Separately)
Sensor I/O Connectors
Shape Cable length Sensor I/O Connectors Applicable proximity sensor models
Straight type
2 m
XS2F-D421-DCO-A
XS2F-D421-GCO-A
E2EQ-X#X1-M1J
XS2F-D422-DCO-A
XS2F-D422-GCO-A
XS2F-D421-DA0-A
XS2F-D421-GA0-A
E2EQ-X#D1-M1GJ
XS2F-D422-DA0-A
XS2F-D422-GA0-A
L type
Straight type
L type
5 m
2 m
5 m
2 m
5 m
2 m
5 m
Rating/Performance
Long-distance type
Model E2EQ-X4X1
Item
Sensing distance 4 mm ±10% 8 mm ±10% 15 mm ±10%
Setting distance*1
Differential distance 15% max. of sensing distance
Standard sensing object
(mild steel)
Response frequency*2
Switching
Control
output
Operating status (with
sensing object approaching)
Protective circuits Surge absorber, load short-circuit protection
Ambient temperature Operating: -25°C to 70°C, Storage: -40°C to 85°C (with no icing or condensation)
Temperature influence
Voltage influence ±1% max. of Sensing distance in rated voltage range ±15%.
Shock resistance Destruction: 1,000 m/s2 for 10 times each in X, Y, and Z directions
Connection method Pre-wired (standard length: 2 m) Connector Extension Models
Weight
(Packed
state)
*1. Use within a range where the green indicator is lit.
*2. The response frequencies for DC switching are average values.
*3. Since residual voltage is 5 V, use it after checking interface requirements with the connection devices.
capacity
Residual
voltage*3
Pre-wired 65 g Approx. 140 g Approx. 190 g
Junction
connector
E2EQ-X4X1-M1J
0 to 3.2 mm 0 to 6.4 mm 0 to 12 mm
12 x 12 x 1 mm 18 ± 18 ± 1 mm 30 ± 30 ± 1 mm
1 kHz 0.5 kHz 0.25 kHz
3 to 100 mA
5.0 V max. (under load current of 100 mA with cable length of 2 m)
C1 models: NO
±15% max. of sensing distance at 23°C within temperature range
of -40°C to 85°C ±10% max. of sensing distance at 23°C within
temperature range of -25°C to70°C
Approx. 20 g Approx. 40g Approx. 90 g
E2EQ-X8X1
E2EQ-X8X1-M1J
E2EQ-X15X1
E2EQ-X15X1-M1J
±15% max. of sensing distance
at 23°C within temperature range
of -25°C to 70°C
D-172 Inductive Sensors
Standard
Item
Model E2EQ-X3D1
E2EQ-X3D1-M1GJ
E2EQ-X7D1
E2EQ-X7D1-M1GJ
E2EQ-X10D1
E2EQ-X10D1-M1GJ
Sensing distance 3 mm ±10% 7 mm ±10% 10 mm ±10%
Setting distance 0 to 2.4 mm 0 to 5.6 mm 0 to 8 mm
Differential distance 10% max.
Standard sensing object
(mild steel)
Response frequency
Switching
Control output
capacity
Residual
voltage
Operating status (with
sensing object approaching)
12 x 12 x 1 mm 18 x 18 x 1 mm 30 x 30 x 1 mm
1 kHz 500 Hz 400 Hz
3 to 100 mA
3.0 V max. (under load current of 100 mA with cable length of 2 m)
NO
Protective circuits Surge absorber, short-circuit protection
Ambient temperature Operating/Storage: -25°C to 70°C (with no icing or condensation)
Temperature influence ±10% max. of sensing distance at 23°C within temperature range of -25°C and 70°C
Voltage influence ±2.5% max. of Sensing distance within rated voltage range ±15%.
Shock resistance Destruction: 1,000 m/s2 for 10 times each in X, Y, and Z directions
Connection method
Weight
(Packed
state)
* The response frequencies for DC switching are average values measured on condition that the distance between each sensing object is twice as large as the size
of the sensing object and the sensing distance set is half of the maximum sensing distance.
Pre-wired Approx. 120 g Approx. 160 g Approx. 220 g
Junction
connector
E2EQ-X#D1: Pre-wired models (Standard length: 2 m)
E2EQ-X#D1-M1GJ type: Connector relay models (Standard length: 300 mm)
Approx. 80 g Approx. 110 g Approx. 190 g
General
Item
Model E2EQ-X4X1
E2EQ-X4X1-M1J
E2EQ-X3D1
E2EQ-X3D1-M1GJ
E2EQ-X8X1
E2EQ-X8X1-M1J
E2EQ-X7D1
E2EQ-X7D1-M1GJ
E2EQ-X15X1
E2EQ-X15X1-M1J
E2EQ-X10D1
E2EQ-X10D1-M1GJ
Sensing object Ferrous metal (Sensitivity lowers with non-ferrous metals)
Rated supply voltage (operat-
ing voltage)
12 to 24 VDC (10 to 30 VDC), ripple (p-p): 10% max.
Leakage current 0.8 mA max.
Indicator lamp Operation indicator (red), operation setting indicator (green)
Ambient humidity Operating/Storage: 35% to 95%RH (with no condensation)
Insulation resistance 50 M min. (at 500 VDC) between energized parts and case
Dielectric strength 1,000 VAC for 1 min between energized parts and case
Vibration resistance 10 to 55 Hz, 1.5 mm double amplitude for 2 hours each in X, Y, and Z directions
Protective structure IEC60529 IP67
Material
Case Teflon resin coating (base: brass) *
Sensing surface Teflon resin *
Accessories Instruction manual
* Teflon is a registered trademark of Dupont Company and Mitsui Dupont Chemical Company for their fluoride resin.
E2EQ
D-173E2EQ
Loading...