Omega Products PX6000L1-015AV User Manual

DIFFUSED SEMICONDUCTOR

PX6000L1

ELECTRIC RECEPTACLE
BENDIX PTIH-10-6P
OR EQUIV. MATES WITH
TWIST-LOCK
PTS06A-10-6S OR EQUIV.
(NOT SUPPLIED)
ALSO AVAILABLE: 4-PIN
SOLDER TERM.
INTEGRAL 0.6 m (24") CABLE

PRESSURE PORT PER MS33656-4
(1/4 TUBE)

ALSO AVAILABLE: MS33649-4 (FEMALE)
1/4-18 NPT (MALE OR FEMALE)
1/8-27 NPT (MALE OR FEMALE)

IDENTIFIED IN THIS AREA

19 (0.750) DIA. MAX.

3.81 ±0.01
(0.15)

61
(2.40)
MAX.

15.85 ±0.25

(0.625 ±0.010)

(WRENCH FLATS)

PRESSURE TRANSDUCER

STANDARD AND METRIC MODELS

PX6000/PXM6000 Series

mV/V Output
0-15 to 0-300 psi-Standard Models
0-1 to 0-25 bar-Metric Models

Standard

All Ranges

$

420

⻬ High Reliability
⻬ Long-Term Stability
⻬ All Stainless Steel Case
⻬ Vacuum Range Available

Applications

⻬ Automotive Testing
⻬ Research and

Development

⻬ Engineering Testing and

Evaluation

⻬ Production Testing
⻬ Flight Recorders
⻬ Engine Monitoring
⻬ Ground Support

Equipment

⻬ Built-In Temperature

Sensor

OMEGA’s PX6000/PXM6000 Series
pressure transducers fit easily into
your application. These low-cost
transducers are small and light,
and mounting requires no bulky
structures. You select from
3 electrical terminations and
6 pressure fittings. The sensor is a
small [about 2.54 cm (0.1")] square
silicon chip with 4 diffused strain
gages, mounted in the stainless
steel case. Laser-trimmed resistors
provide temperature compensation
and adjust zero balance and span.
The 30 mV full range output is
compatible with most amplifiers
and data acquisition systems.

The PX6000/PXM6000 uses solid
state media isolation for improved

reliability. Thin films of chemically
inert materials are deposited or
grown on the chip surface to
provide electrical isolation between
the sensor and pressure medium.
The sensor is less sensitive to
vibration and more dependable in
high-shock environments.
Corrosion resistance is outstanding,
and the isolation will remain
effective because there is no gel or
oil column to deteriorate.

SPECIFICATIONS

ELECTRICAL

Excitation: 10 Vdc
Output: 3 mV/V ± 10%
Input Resistance: 2000 Ω minimum
Output Resistance: 1000 Ω minimum,

1500 Ω maximum

Zero Balance: 0 mV ±5% FSO
Dielectric Isolation Resistance:

100 MΩ minimum at 50 Vdc applied
between the case or a conductive
medium and the bridge circuit

Sensing Element: 4-active-arm bridge
using a micro-machined diffused silicon
diaphragm sensor, thin-film media and
dielectric isolation barriers

Temperature Sensor:

Output resistance @ 24°C (75°F)
900 to 1500 Ω

Temperature Coefficient:

8% min, 10% max per 55.5°C (100°F)

PERFORMANCE

Accuracy: ±0.25% FS combined

linearity, hysteresis and repeatability
for all ranges

ENVIRONMENTAL

Operating Temp Range:

-54 to 150°C (-65 to 300°F)

Compensated Temp Range:

-54 to 121°C (-65 to 250°F)

Thermal Effects:

Span: ≤±0.02% of FS/°F
Zero: ≤±0.02% of FS/°F

Vibration Sensitivity: At 35g peak

sinusoidal vibration from 10 Hz to
2000 Hz (
exceed 0.04% FS/g for 15 psi range to

0.005% FS/g for 100 psi and above
Natural Frequency: Greater than

35 kHz for 100 psi and above
Shock: 100 g, 11 ms half sine wave

without damage

1

⁄2" D.A.), the output shall not

B-67

PX6000L1-100GV
MS33656-4 pressure
ports standard, $420,
shown actual size.

PRESSURE

Proof Pressure: 2 times rated pressure

will not cause changes in performance
beyond the specified tolerances

Burst Pressure: 3 times rated pressure
for pressure ranges below 200 psi, or 2.5
times rated pressure for pressure ranges
above 200 psi will not cause rupture of the
pressure sensor

MECHANICAL

Wetted Parts: 316 stainless steel, silicon

nitride, Pyrex

Electrical Connection:

PTIH-10-6P or 0.6 m (2') cable or 4-pin
solder terminal header

Pressure Port: See custom configurations
Weight: 4 oz max, excluding pressure

fitting and electrical connection

Mating Connector:

PTS06A-10-6S (sold separately)

Dimensions: mm (in)

G1/8 B (MALE OR FEMALE)
G1/4 B (MALE OR FEMALE)

®

glass, epoxy, Kovar

Pin Wire
A = + Input (Red)
B = + Output (Yellow)
C = - Output (Blue)
D = - Input (White)
E = Temp. Sensor (N/A)
F = Temp. Sensor (N/A)

®

PX6000:

15.85 ±0.25

(0.625 ±0.010)

(WRENCH FLATS)

PXM6000:

G1/4

18 (0.71)

or HEX

DIFFUSED SEMICONDUCTOR PRESSURE TRANSDUCER

STANDARD CUSTOM CONFIGURATIONS

PX6000 PRESSURE ELECTRICAL RANGE
SERIES PORT CONNECTION (psi) UNITS OUTPUT OPTIONS

A =
B = 1⁄8-27 NPT Female
C = 1⁄4-18 NPT Male
D = 1⁄4-18 NPT Female
L = MS33656-4 Male
M = MS33649-4 Female

[ 1 ] [ 2 ] [ 3 ] [ 4 ] [ 5 ] [ 6 ]

1

⁄8-27 NPT Male

30*

15

0
020
050
100
200
300

VAC

,A

G
G,A
G,A
G,A
G,A
G,A

Base Price PX6000
V = mV/V output

$420 all ranges

5T = 0 to 5 Vdc output

$560 all ranges

I = 4 to 20 mA output

$550 all ranges

* Referenced to atmospheric pressure,

0 = 0.6 m (2') cable (std)

+$6.50/ft over 0.6 m (2')

30 Vac range is 30 to 0 inHg vacuum,
all other ranges are psi

1 = PTIH-10-6P connector

or equal (no charge).
Mating connector (not
included), order

PTS06A-10-6S $47.

3 = 4-pin eyelet header (no charge).

Temp sensor not available

6 = mini DIN connector (no charge).

Temp sensor not available.

To order a custom configuration:

1. Select a pressure port

2. Select electrical connection

3. Select a pressure range

4. Select pressure units

5. Select output

6. Select options and agency approvals

CAL5 = 5-point NIST

calibration STD

CAL11 = 11-point NIST

calibration +$250

xxFT = Extra length of

cable, $6.50/ft
over 0.6 m (2')

Note: All mV/V models
meet CE requirements.

PRESSURE TRANSDUCERS

MILLIVOLT OUTPUT

B

Visit omega.com/pxm6000-mv.
Ordering Examples: PX6000M1-100GI, 100 psi vented gage pressure transducer with MS33649-4 female pressure connection,

PTIH-10-6P electrical connector and 4 to 20 mA output, $550. PTS06A-10-6S, mating connector (sold separately), $47.
PX6000A0-30VACV-25FT, 30 to 0 inHg vacuum transducer with a

(30 inHg vacuum = full scale output) mV/V output, and a 7.6 m (25') cable, $420 + 150 = $570.
PX6000L1-015A5T, 15 psi absolute pressure transducer with MS33656-4 male pressure connection, PTIH-10-6P electrical connector

and 0 to 5 Vdc output, $560. PTS06A-10-6S, mating connector (sold separately), $47.

1

⁄4 NPT Pressure Snubbers: $12.75

PS-4G = Gas
PS-4E = Lt Oil
PS-4D = Dense Lq

1

-27 NPT male pressure connection, a reverse-acting

⁄

8

G1⁄4 Pressure Snubbers: $12.75

PS-4G-MG = Gas
PS-4E-MG = Lt Oil
PS-4D-MG = Dense Liquid

METRIC CUSTOM CONFIGURATIONS

PXM6000 PRESSURE ELECTRICAL RANGE
SERIES PORT CONNECTION (BAR) UNITS OUTPUT OPTIONS

MA = G
MB = G1⁄8B Female no charge
MC = G1⁄4B Male +$20
MD = G1⁄4B Female no charge

See page B-12 for additional options including
extended compensated temperatures.

Ordering Examples: PXM6000MB0-010BARAV, 10 bar absolute pressure transducer with G
termination, $420.

PXM6000MD1-010BARAV, 10 bar absolute pressure transducer with G
mating connector (sold separately), $26.50.

[ 1 ] [ 2 ] [ 3 ] [ 4 ] [ 5 ] [ 6 ]

1

⁄8B Male +$20

0 = 0.6 m (2') cable (std)

$6.5/ft over 0.6 m (2')

1 = PTIH-10-6P connector

(or equal, no charge)

3 = 4-pin eyelet*

*no shunt cal (no charge)

6 = mini DIN connector*

*no shunt cal (no charge)

1.0

1.6

4.0

6.0
10
16

A, G
A, G
A, G
A, G
A, G
A, G

V = mV/V

CAL11 = 11-point calibration

Base price
PXM6000

$420

To order a custom configuration:

1. Select a pressure port

2. Select electrical connection

3. Select a pressure range

4. Select pressure units – absolute, gage

or sealed gage

5. Select output

6. Select options and agency approvals

1

B female connection and 0.6 m (2') cable

⁄

8

1

B female connection and twist-lock connector, $420. PT06F10-6S,

⁄

4

certificate

( )m = Optional cable

length in meters

B-68