Omega Products CNi3222 User Manual

9‑segment display

⁄32 DIN Temperature, Process

and Strain PID Controllers

CNi32 Series

U High Accuracy: ±0.03%

Reading, 0.5°C (±0.9°F)

U First

with Totally Programmable Color Displays Standard

U User-Friendly,

Simple to Conﬁgure

U Free Software,

ActiveX Controls

U Full Autotune PID Control U Universal Inputs:

Thermocouple RTD, Process Voltage/ Current, Strain

U First

Offering Both RS232 and RS485 Serial Communications in 1 Instrument (Optional)

U First 1⁄32 DIN Instrument

with Built-in Excitation, 24 Vdc Standard

U Temperature Stability

±0.04°C/°C RTD and ±0.05°C/°C TC @ 25°C (77°F)

U NEMA 4 (IP65) Front Bezel U First 1⁄32 DIN Instrument

with Analog Output Selectable as a Control Output or as Retransmission of Process Variable

U 2 Control or Alarm

Outputs Optional: DC Pulse, Solid State Relays, Mechanical Relays, Analog Voltage and Current

U Front Removable and

Plug Connectors

⁄32 DIN Instrument

The OMEGA® CNi32 is the iSeries controller in the extremely compact and increasingly popular 1⁄32 DIN size (22.5 x 45 mm cutout). The CNi32 is the most sophisticated and accurate instrument available in the small

⁄32 DIN package, yet is still easy

to conﬁgure.

The CNi32 handles more thermocouple, RTD, process voltage and current inputs than any other 1⁄32 DIN controller.

The CNi32 is the ﬁrst 1⁄32 DIN controller with built‑in excitation for transmitters or other devices, 24 Vdc @ 25 mA.

The CNiS32 has built‑in excitation for bridge transducers, 5 Vdc @ 40 mA or 10 Vdc @ 60 mA. When communications options are installed, external excitation may be used and ratiometric operation maintained by connecting the external excitation to the sense leads. Both 4‑ or 6‑wire bridge conﬁgurations are supported for internal or external excitation. Non‑ratiometric operation is supported for voltage and current transducers

The iSeries displays feature unique 9‑segment LED characters, which greatly improves alphanumeric representations. The 7‑segment LED characters found on most instruments are adequate for presenting numbers, but not letters.

Words are easier to read with the unique 9‑segment LED characters on the iSeries, which makes operating and programming simpler and easier.

9-segment LED

Panel punches

available, visit

omega.com/

panelpunches

CNi3233, smaller than actual size.

and is also valuable in measuring offset and millivolt output of bridge devices during manufacturing and calibration. This model also features 10‑point linearization which allows the user to linearize the signal input from extremely nonlinear transducers of all kinds.

The CNi32 introduces a number of unique features not yet found on any

other

⁄32 DIN instrument. The CNi32 is the ﬁrst 1⁄32 DIN controller with a totally programmable display that can change color between GREEN,

AMBER, and RED at any setpoint

or alarm point.The unique 9‑segment LED characters greatly improves alphanumeric representations.

The CNi32 is the ﬁrst 1⁄32 DIN controller offering 2 SPDT Form C relays, instead of the single throw relays on typical 1⁄32 DIN controllers.

The CNi32 is the ﬁrst to offer both RS232 and RS422/485 serial communications in 1 instrument (C24 option). Both ASCII protocol and modbus protocol are selectable from the menu.

7‑segment display

9‑segment display

P-19P-19

DPi32-B-COVER front

25.4 (1.00)

panel button cover supplied with each

unit, standard.

CNi3233, shown smaller than actual size.

22.50 +0.61/-0 (0.89)

PANEL CUTOUT

Dimensions: mm (inch)

45.00 +0.61/-0.00 (1.89)

PANEL THICKNESS

/32 DIN

Options

Sufﬁx Ordering Description

-AL Limit alarm version

-SM Simpliﬁed menu (on/

Network Options

-C24 Isolated RS232 and

-EIS-2B

Power Supply

-DC 12 to 36 Vac/dc,

Factory Setup

-FS Factory setup and

-FS(RTD-1N) Factory scaled for

-FS(RTD-2N) Factory scaled for

Software (Requires Network Option) OPC-SERVER OPC server/driver

LICENSE software license

Excitation not available with “-DC”, “-C24” or

“-C4EI” options.

“-AL” option not available on models with

analog (0 to 10V/0 to 20 mA) output.

“-SM” option not available on CNiS strain/

process input models.

(simpliﬁed menu, alarms only, no PID control)

off control or alarms, no PID)

RS485/422, 300 to

19.2 Kb

Industrial iServer Microserver™, serves 32 devices

24 Vac

conﬁguration

MIL‑T‑7990B nickel RTD input, 0 to 200°C (32 to 392°F)

MIL‑T‑7990B nickel RTD input, ‑40 to 300°C (‑40 to 572°F)

CNi3244, shown smaller than actual size.

48.0

48.0 (1.89)

(1.89)

FRONT VIEW

6.4 MAX

0.6 MIN

48.0

48.0 (1.89)

(1.89)

REAR VIEW

25.4 (1.00)

To Order Visit omega.com/cni32_series for Pricing and Details

Model No. Output 1 Output 2 Temperature/Pressure Input CNi3222 0.5 A SSR 0.5 A SSR CNi3223 0.5 A SSR Relay CNi3224 0.5 A SSR DC pulse CNi3233 Relay Relay CNi3242 DC pulse 0.5 A SSR CNi3243 DC pulse Relay CNi3244 DC pulse DC pulse CNi3252 Analog 0.5 A SSR CNi3253 Analog Relay CNi3254 Analog DC pulse Strain/Process Input CNiS3222 0.5 A SSR 0.5 A SSR CNiS3223 0.5 A SSR Relay CNiS3224 0.5 A SSR DC pulse CNiS3233 Relay Relay CNiS3234 Relay DC pulse CNiS3242 DC pulse 0.5 A SSR CNiS3243 DC pulse Relay CNiS3244 DC pulse DC pulse CNiS3252 Analog 0.5 A SSR CNiS3253 Analog Relay CNiS3254 Analog DC pulse

Accessory

Model No. Description DPP-1

Comes complete with DPi32-B-COVER and operator’s manual. Ordering Examples: CNi3222-C24,

control and serial communications, both RS232 and RS485. CNiS322-AL,

⁄32 DIN panel punch

DIN PID controller with 2 solid-state relays for PID

⁄

DIN strain/process controller, limit alarm version with SSR output.

⁄

P-20

25.4 (1.00)

+ 1 hidden pages