Omega Products CN9311-C4 User Manual
Autotune Temperature/
Process Controllers
1
CN9300 Series
DIN, starts at $189.
⁄16
CN9000 Series
Starts at
$
All shown actual size.
178
CN9300, CN9400, CN9500
and CN9600 Series
Display Engineering Units
°C, °F, BAR, PSI, pH, rH,
SET (Universal Unit)
4-Digit Display
NEMA 4 (IP66) Faceplate
CN9400/CN9600 Series
1
⁄16 DIN, starts at $209.
CN9600 Series
Unique Features
Multi Ramp and Soak:
31 Programs,
126 Segments
3 Outputs Standard
Specifications
Power: 100 to 240 Vac, ±10%,
50 to 60 Hz, 4 VA; optional 12 or
24 Vac/dc, ±20%, 50 to 60 Hz, 4 VA
Display: 4-digit LED, 10 mm (0.4"),
high brightness green display
CN9400/CN9600 Dual Display:
Lower display: 9 mm (0.35") Orange
Display Range: -199 to 9999 counts
(hi-res mode -199.9 to 999.9)
Range: Sensor limited 2000°C/3500°F;
-99.9 to 999.9° in 0.1° resolution
Thermocouple Cold Junction
Compensation Rejection:
20:1 (0.05°/°C) typical
Thermocouple External Resistance:
100 Ω max
Calibration Accuracy:
±0.25% FS ±1°C
Sampling Frequency:
Input 10 Hz, CJC 2 sec
Common Mode Rejection: Negligible
effect up to 140 dB, 240 V, 50 to 60 Hz
Temperature Coefficient:
150 ppm/°C sensor max
CN9500 Series 1⁄32
DIN, starts at $178.
Input Ranges
Thermocouple Type (Units Are °C/°F Switchable) °C
Pt-30%Rh/Pt-6%Rh 0 to 1800 °C 32 to 3272°F 2.0
CHROMEGA®-Constantan 0 to 600 °C 32 to 1112°F 0.5
Iron-Constantan 0 to 800 °C 32 to 1472°F 0.5
CHROMEGA®-ALOMEGA®-50 to 1200 °C -58 to 2192°F 0.25
L (J DIN) Iron-Constantan 0 to 800 °C 32 to 1472°F 0.5
OMEGA-P®-OMEGA-N
Pt-13%Rh/Pt 0 to 1600 °C 32 to 2912°F 2.0
Pt-10%Rh/Pt 0 to 1600 °C 32 to 2912°F 2.0
Copper-Constantan -200 to 250 °C -273 to 482°F 0.25
Notes: Type B: 5° (70-500°C), Types K and N: 1° >350°C; exceptions: Types R and S: 5° <300°C,
Type T: 1°,-25° or >150°C RTD/Pt100: 0.5<-100°C
Sensor and Input Linearized Range Linearity*
Sensor Type Type (Units are °C/°F Switchable) °C
RTD 2-Wire, 100 ΩPt 200 to 400°C -273 to 752°F 0.25
CN9600 ONLY 2-, 3-wire RTD input 200 to 400°C -273 to 752°F 0.25
Linear Process Inputs
(Input mV range: 0 to 50 mV) (1 Ω shunt resistor is supplied for mA inputs)
Input Type Signal Span Maximum Scale Settings Accuracy
Linear Process 0 to 20 mV -250 to 3000 ±0.5%
CN9600 ONLY 0 to 50mV -199 to 9999 ±0.1%
®
Linearized Range Linearity
-50 to 1200 °C -58 to 2192°F 0.25
P-33
Output Device Options:
Extended Warranty
Program
SM
Relay: Form A/SPST contacts
2 A/250 Vac, resistive
DC Pulse Driver: 5 Vdc
(0/-15%) 15 mA non-isolated
6 Vdc @ 20 mA (CN9600 only)
Analog (CN9600 Only):
Accuracy 0 to 1% FS typical,
4 to 20 mA (500 Ω max);
Operating Ambient Range:
0 to 50°C (32 to 122°F)
Case Material:
Flame-retardant polycarbonate
Weight:
CN9300: 120 g (4.3 oz)
CN9400: 120 g (4.3 oz)
CN9500: 110 g (3.9 oz)
CN9600: 180 g (6.4 oz)
1
⁄32 DIN Panel Cutout Size:
45 x 22.2 mm (1.77 x 0.87")
9.5 mm (0.374") max panel thickness
1
⁄16 DIN Panel Cutout Size:
45 mm square (1.772")
9.5 mm (0.374") maximum
panel thickness
0 to 5 Vdc 10 mA (500 Ω min)
0 to 10 Vdc 10 mA (1 kΩ min)
MOST POPULAR MODELS HIGHLIGHTED!
To Order (Specify Model Number) (Both Outputs can be Either Reverse or Direct Acting)
Model No. Price Description Output 1 Output 2 Output 3
CN9511 $184
CN9512 178
CN9522 184
CN9311 195
CN9312 189
CN9322 195
CN9411 215
CN9412 209
CN9422 215
CN96111(*) 247
CN96211(*) 236
CN96221(*) 231
CN96411(*) 299
CN96421(*) 289
CN96511(*) 299
CN96521(*) 289
CN96611(*) 299
CN96621(*) 289
Comes complete with operator’s manual.
Specify input type. Insert “TR” for standard thermocouple/RTD, or for a dedicated process input add “MA”, “5V”, or “10V”.
*
Ordering Examples: CN9512, 1⁄32 DIN single display, dual output ramp/soak, thermocouple/RTD input controller, DC pulse and a mechanical relay
output, $178.
OCW-2, OMEGACARESMextends standard 3-year warranty to a total of 5 years ($32), $178 + 32 = $210.
Additional Options
Suffix Price Description
-C2 $50 RS232 communications
-C4 50 RS485 communications
-LV* N/C 12 to 24 Vac/Vdc low-voltage power
Note: 1 communications option can be ordered per unit.
Field installable communication boards can be installed in the field.
Low-voltage power option is not field installable and available only on the following models:
*
CN9312, CN9322, CN9512 and CN9522.
1
⁄32DIN single display controller Relay Relay -
1
⁄32DIN single display controller DC pulse Relay -
1
⁄32DIN single display controller DC pulse DC pulse -
1
⁄16DIN single display controller Relay Relay -
1
⁄16DIN single display controller DC pulse Relay -
1
⁄16DIN single display controller DC pulse DC pulse -
1
⁄16DIN dual display controller Relay Relay -
1
⁄16DIN dual display controller DC pulse Relay -
1
⁄16DIN dual display controller DC pulse DC pulse -
1
⁄16DIN multi ramp and soak controller Relay Relay Relay
1
⁄16DIN multi ramp and soak controller DC pulse Relay Relay
1
⁄16DIN multi ramp and soak controller DC pulse DC pulse Relay
1
⁄16DIN multi ramp and soak controller 4 to 20 mA Relay Relay
1
⁄16DIN multi ramp and soak controller 4 to 20 mA DC pulse Relay
1
⁄16DIN multi ramp and soak controller 5 Vdc Relay Relay
1
⁄16DIN multi ramp and soak controller 5 Vdc DC pulse Relay
1
⁄16DIN multi ramp and soak controller 10 Vdc Relay Relay
1
⁄16DIN multi ramp and soak controller 10 Vdc DC pulse Relay
OMEGACARESMextended warranty program is
available for models shown on this page. Ask
your sales representative for full details when
placing an order. OMEGACARE
labor and equivalent loaners.
SM
covers parts,
P
Field Installable Boards and Accessories
Model Number Price Description
BD9-C2 $50 RS232 communications board
BD9-C4 50 RS485 communications board
CN9-SW 159 Software for CN9300, 9400 and 9500
CN9-SW-GRAFIX 299 Software for CN9300, 9400, 9500 and 9600
CN9-C2-CABLE-10 16 RS232 cable with female DB-9, 3 m (10')
CN9-C2-CABLE-25 16 RS232 cable with female DB-9, 8 m (25')
CN9-16-MB 201⁄16 DIN mounting bracket for DIN rail or surface mount
CN9-32-MB 201⁄32 DIN mounting bracket for DIN rail or surface mount
P-34
Loading...