Transition junction
probes sold separately.
See page A-78.
t
i
s
i
v
,
e
l
/
m
o
c
.
a
s
e
h
c
n
u
p
s
e
h
c
n
u
p
l
e
n
CN8501, $264.
The CN8500 temperature controller
is extremely versatile and user-friendly.
The operator needs to review only
those parameters relevant to the
particular application during setup.
A dual digital display offers optimum
process information at a glance.
The dedicated upper display shows
the process temperature, while the
lower display displays setpoint and
setup parameters. Individual LED’s
identify the status of outputs, alarms,
digital communications and special
options. The CN8500 features a
NEMA 4X (IP65) front panel and a
universal power supply that accepts
103 to 253 Vac and 103 to 330 Vdc.
Control algorithms available are
P, PI, PD, PID, or on/off. The
autotune feature automatically sets
proportional band, rate and reset
before the process reaches
setpoint. These parameters provide
quick stabilization of both the
heating and cooling process without
overshoot, hunting or cycling. The
standard dual control outputs can
be configured in a variety of control
and alarm applications such as
heat, heat/cool, heat/alarm, cool, or
cool/alarm. The ramp to setpoint
feature allows the user to define the
rate of rise to reach the setpoint,
thus minimizing thermal shock to
the load during start-up.
Specifications
Performance
Accuracy: ±0.2% of full scale, ± digit
Setpoint Resolution: 1 count/0.1 count
Repeatability: ±1.0 count
Temperature Stability: 5 µV/°C max;
range for thermocouple and RTD;
limited to scaled range
Alarms: Adjustable for high/low,
process or deviation
Rate: 0 to 900 seconds
Reset: 0 to 3600 seconds
Cycle Time: 0.2 to 120 seconds
Gain: 0 to 400
Gain Ratio: 0 to 2.0 (in 0.1 increments)
On/Off Deadband: 1 to 100 counts
Spread (Output 2): 0 to 100 counts
(above setpoint)
Damping: Adjustable (low, normal or high)
Ramp to Setpoint: 1 to 100 minutes
Autotune: Operator initiated from
front panel
Manual Control: Operator initiated from
Display: Dual LED, 4-digit, orange
process display, green menu/ parameter
display; 9.2 mm (0.37")
Power Consumption: Less than 6 VA
(instrument) @ 120 Vac
Weight: 0.25 kg (8 oz)
Panel Cutout: 45 mm (1.772") square
Dimensions: 53 H x 53 W x 18.3 mm
bezel (2.1 x 2.1 x 0.72")
Depth Behind Panel: 100 mm (3.937")
Front Panel Rating: NEMA 4X (IP65)
Operating Ambient Range:
0 to 55°C (32 to 131°F);
90% RH max, non-condensing
Memory Protection: Solid state
non-volatile memory
Connections: Rear barrier strip with
locking terminals
Contacts: Twin bifurcated
Bezel Dimensions
53
(2.1)
53
(2.1)
Dimensions: mm (in)
A
lso Available
1
in
⁄
8
D
IN
Sizes! See Page
and
1
⁄4
DIN
P-57
Input Types and Ranges
Input
CodeTypeRangeResolution
Iron-Constantan-18 to 760°C (0 to 1400°F)1°C (1°F)
CHROMEGA
-ALOMEGA
CCopper-Constantan-129 to 316°C (-200 to 600°F)1°C (1°F)
T
OMEGALLOY
Pt/13%Rh-Pt-18 to 1760°C (0 to 3200°F)1°C (1°F)
Pt/10%Rh-Pt-18 to 1760°C (0 to 3200°F)1°C (1°F)
3-wire, 100Ω Pt-200 to 850°C (-328 to 1562°F)1°C (1°F)
RTD
V50 to 5V, 1 to 5V Scalable (-1999 to 9999)Selectable
V100 to 10V, 2 to 10VScalable (-1999 to 9999)Selectable
MV0 to 50 mV, 10 to 50 mVScalable (-1999 to 9999)Selectable
MA0 to 20 mA, 4 to 20 mAScalable (-1999 to 9999)Selectable
3-wire, 100Ω Pt
®
®
®
-18 to 1349°C (0 to 2460°F)1°C (1°F)
-18 to 1299°C (0 to 2370°F)1°C (1°F)
-128.8 to 232.2°C 0.1°C
(-199.0 to 450.0°F)(0.1°F)
AVAILABLE FOR FAST DELIVERY!
To Order
Model NumberPriceDescription
CN8501(*)-(**)$264Single output
CN8502(*)-(**)-(***)289Dual output
Comes complete with operator’s manual.
** Specify input code: “TC” (thermocouple), “RTD”, “MV” (voltage to 50 mV),
“V5” (voltage to 5V), “V10” (voltage to 10V) or “MA” (current to 20 mA). See input type table
above for details.
*** Specify output code(s) from output options table below. Single output units can be ordered
for either heat (reverse) or cool (direct) action.
For power option add suffix “-24” to model number for 24 Vdc/Vac power, and $25 to price.
Output Options (No Additional Cost)
Output Type(Reverse) Order Suffix(Direct)†Order Suffix
5 A Relay-R1-R2
1 A SSR-T1-T2
4 to 20 mA-F1-F2
20 Vdc Pulse-DC1-DC2
† Single output controllers can be ordered for either heat (reverse) or cool (direct) acting.
Ordering Example: CN8501TC-R2,
configured for cooling operation, $264.
Options (1⁄16 DIN—Only 1 Option Available Per Unit)
Order SuffixAdd’l PriceDescription
-A$40Dual alarms
-C295RS232 communications
-C495RS485 communications
-PV1
-PV2
-RSP1
-RSP2
-RSP3
-XP175Transducer power supply, 15 Vdc
† Not available for voltage or current input models with input codes “MV”, “V5”, “V10” or “MA”.
Ordering Example: CN8502V5-F1-F2-C2, 0 to 5 Vdc input, dual 4 to 20 mA outputs, RS232
754 to 20 mA recorder output
750 to 5 Vdc recorder output
75Remote switch closed with 1 alarm
75Remote switch open with 1 alarm
750 or 5 Vdc remote setpoint with 1 alarm
110 to 230 Vac
N/CRemote monitoring and control software
DIN controller, thermocouple input, 5 A relay output
Calibrators, Connectors, General Test and Measurement
Instruments, Glass Bulb Thermometers, Handheld Instruments
for Temperature Measurement, Ice Point References,
Indicating Labels, Crayons, Cements and Lacquers, Infrared
Temperature Measurement Instruments, Recorders Relative
Humidity Measurement Instruments, RTD Probes, Elements
and Assemblies, Temperature & Process Meters, Timers and
Counters, Temperature and Process Controllers and Power
Switching Devices, Thermistor Elements, Probes and
Assemblies,Thermocouples Thermowells and Head and Well
Assemblies, Transmitters, Wire
Flow and Level
Air Velocity Indicators, Doppler Flowmeters, Level
Measurement, Magnetic Flowmeters, Mass Flowmeters,
Pitot Tubes, Pumps, Rotameters, Turbine and Paddle Wheel
Flowmeters, Ultrasonic Flowmeters, Valves, Variable Area
Flowmeters, Vortex Shedding Flowmeters
pH and Conductivity
Conductivity Instrumentation, Dissolved Oxygen
Instrumentation, Environmental Instrumentation, pH
Electrodes and Instruments, Water and Soil Analysis
Instrumentation
Data Acquisition
Auto-Dialers and Alarm Monitoring Systems,
Communication Products and Converters, Data
Acquisition and Analysis Software, Data Loggers
Plug-in Cards, Signal Conditioners, USB, RS232, RS485
and Parallel Port Data Acquisition Systems, Wireless
Transmitters and Receivers
Band Heaters, Cartridge Heaters, Circulation Heaters,
Comfort Heaters, Controllers, Meters and Switching
Devices, Flexible Heaters, General Test and Measurement
Instruments, Heater Hook-up Wire, Heating Cable
Systems, Immersion Heaters, Process Air and Duct,
Heaters, Radiant Heaters, Strip Heaters, Tubular Heaters
click here to go to the omega.com home page
Loading...
+ hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.