Olympus V207010SU000 User manual

DIGITAL CAMERA

Instruction Manual

Table of Contents Quick task index

Preparing the camera and flow of

operations

2. Shooting using the viewfinder

3. Shooting using live view

4. Viewing photographs and movies

5. Basic operations

6. Using shooting options

7. Menu functions

8. Printing pictures

Connecting the camera to a

computer and a smartphone

10. Battery, battery charger, and card

11. Interchangeable lenses

12. Using separately sold accessories

13. Information

14. SAFETY PRECAUTIONS

Thank you for purchasing an Olympus digital camera. Before you start to use your new camera,

please read these instructions carefully to enjoy optimum performance and a longer service life. Keep this manual in a safe place for future reference.

We recommend that you take test shots to get accustomed to your camera before taking important

photographs.

The screen and camera illustrations shown in this manual were produced during the development

stages and may differ from the actual product.

If there are additions and/or modifications of functions due to firmware update for the camera, the

contents will differ. For the latest information, please visit the Olympus website.



This notice concerns the supplied ﬂ ash unit and is chieﬂ y directed to users in

North America.

Information for Your Safety

IMPORTANT SAFETY INSTRUCTIONS

When using your photographic equipment, basic safety precautions should always be followed, including the following:

• Read and understand all instructions before using.

• Close supervision is necessary when any ﬂ ash is used by or near children. Do not leave ﬂ ash unattended while in use.

• Care must be taken as burns can occur from touching hot parts.

• Do not operate if the ﬂ ash has been dropped or damaged - until it has been examined by qualiﬁ ed service personnel.

• Let ﬂ ash cool completely before putting away.

• To reduce the risk of electric shock, do not immerse this ﬂ ash in water or other liquids.

• To reduce the risk of electric shock, do not disassemble this ﬂ ash, but take it to qualiﬁ ed service personnel when service or repair work is required. Incorrect reassembly can cause electric shock when the ﬂ ash is used subsequently.

• The use of an accessory attachment not recommended by the manufacturer may cause a risk of ﬁ re, electric shock, or injury to persons.

SAVE THESE INSTRUCTIONS

Indications used in this manual

The following symbols are used throughout this manual.

Important information on factors which may lead to a malfunction

Cautions

Notes

Tips

or operational problems. Also warns of operations that should be absolutely avoided.

Points to note when using the camera. Useful information and hints that will help you get the most out of

your camera. Reference pages describing details or related information.

Quick task index 7

Unpack the box contents .............9

Preparing the camera and ﬂ ow of operations 10

Names of parts ...........................10

Charging and inserting the

battery .........................................12

Inserting and removing cards ...13 Attaching a lens to

the camera ..................................14

Attaching the ﬂ ash unit .............15

Power on .....................................16

Setting the date/time ..................17

Setting the shooting mode ........18

Selecting a shooting method ....19

Shooting using the viewﬁ nder 20

Shooting ......................................20

Shooting still pictures................20

Recording movies .....................22

Setting shooting functions ........23

Using the Multi-function

button ....................................23

Using the super control panel ...24

Shooting using live view 25

Shooting ......................................25

Shooting still pictures................25

Recording movies .....................26

Using the touch screen ..............27

Selecting a focusing method ....27

Using the wireless LAN

function ..................................27

Setting shooting functions ........28

Using live guides ......................28

Using live control .......................30

Viewing photographs and movies 31

Viewing photographs and

movies .........................................31

Index display/Calendar

display ...................................31

Viewing still images ..................32

Watching movies ......................32

Volume......................................32

Protecting images .....................32

Erasing images .........................33

Selecting images

(Share Order Selected/0/

Erase Selected) .....................33

Using the touch screen ..............34

Selecting and protecting

images ...................................34

Basic operations 35

Information displays while

shooting ......................................35

Viewﬁ nder display when shooting

using the viewﬁ nder...............35

Monitor display when shooting

using live view .......................36

Switching the information

display ...................................37

Using the shooting modes ........38

“Point-and-shoot” photography

(P program mode) .................38

Choosing aperture

(A aperture-priority mode) ....39

Choosing shutter speed

(S shutter-priority mode) .......40

Table of Contents

Choosing aperture and shutter

speed (M manual mode) .......41

Using movie mode

Table of Contents

Adding effects to a movie

[Movie Effect] .........................42

Using art ﬁ lters..........................44

Shooting in scene mode ...........46

Using PHOTO STORY .............48

Commonly used shooting

options ........................................51

Controlling exposure

(exposure compensation) ......51

Changing the brightness of

highlights and shadows .........51

Locking the exposure

(AE Lock)...............................51

Using a ﬂ ash

(ﬂ ash photography) ...............52

Choosing a focus target

(AF Area) ...............................54

Setting the AF target .................54

Face priority AF/pupil detection

AF ..........................................55

Zoom frame AF/zoom AF..........56

Sequential shooting/

using the self timer ................57

Adjusting color

(white balance) ......................58

ISO sensitivity ...........................59

Controlling color

(Color Creator) ......................60

HDR photography .....................60

Information display during

playback ......................................62

Playback image information .....62

Switching the information

display ...................................62

Changing the playback

information display method ...63 Sharing images over Wi-Fi

connection (Share Order) ......64

Manipulating playback

images ...................................65

(n) ............42

Using shooting options 68

Reducing camera shake

(image stabilizer) ...................68

Processing options

(picture mode) .......................70

Adding effects to a movie .........71

Setting the image aspect ..........71

Image quality (record mode).....72

Adjusting ﬂ ash output

(ﬂ ash intensity control) ..........73

Choosing how the camera

measures brightness

(metering) ..............................74

Choosing a focus mode

(AF mode) .............................75

Movie sound options (recording

sound with movies)................76

Menu functions 77

Basic menu operations ..............77

Using Shooting Menu 1/

Shooting Menu 2 ........................78

Formatting the card

(Card Setup) ..........................78

Restoring default settings

(Reset/Myset) ........................79

Processing options

(Picture Mode) .......................80

Image quality (K) ...................81

Setting the self timer (j/Y) ...81 Varying settings over a series of

photographs (bracketing) ......82

Recording multiple exposures in a

single image

(multiple exposure) ................84

Shooting automatically with a

ﬁ xed interval

(time lapse shooting) .............85

Wireless remote control ﬂ ash

photography ..........................86

Digital Zoom

(Digital Tele-converter) ..........86

Keystone correction and

perspective control

(Keystone Comp.) .................86

HDR photography .....................87

Using the playback menu ..........88

Displaying images rotated

(R) .......................................88

Editing still images ....................88

Canceling all protections ..........90

Using the Smartphone connection

option (Connection to

Smartphone)..........................90

Using the setup menu ................91

X (Date/time setting) ...............91

W (Changing the display

language) ..............................91

i (Monitor brightness

adjustment)............................91

Rec View ..................................91

Wi-Fi Settings ...........................91

c/# Menu Display ..................91

Firmware...................................91

Setting up a wireless LAN

connection (Wi-Fi Settings) ...92

Using the custom menus ...........93

R AF/MF ..................................93

S Button/Dial/Lever .................94

T Release/j .........................94

U Disp/8/PC ..........................95

V Exp/p/ISO ..........................96

W # Custom ............................97

X K/Color/WB .......................98

Y Record/Erase .......................99

Z Movie .................................100

b Built-In EVF ........................100

K Utility ............................101

AEL/AFL .................................102

MF Assist ................................102

Button Function ......................103

t Lever Function .................105

Viewing camera images

on TV ...................................105

Choosing the control panel

displays (KControl

Settings) ..............................107

Adding information displays

(G/Info Settings) ................109

Shutter speeds when the ﬂ ash

ﬁ res automatically [# X-Sync.]

[# Slow Limit] .....................110

AF focus adjustments .............110

Using the accessory port

menus ........................................112

Before using the accessory

port menus ..........................112

Using OLYMPUS PENPAL .....113

A OLYMPUS PENPAL

Share ...................................114

B OLYMPUS PENPAL

Album ..................................1 15

C Electronic Viewﬁ nder .........115

Printing pictures 116

Print reservation (DPOF) .........116

Creating a print order..............116

Removing all or selected pictures

from the print order ..............116

Direct printing (PictBridge) .....117

Easy printing ...........................118

Custom printing ......................118

Connecting the camera to a computer and a smartphone 120

Installing the PC software .......120

Copying pictures to a computer

without OLYMPUS Viewer 3 .....122

Table of Contents

Using the camera wireless LAN

function .....................................123

Things you can do with

Table of Contents

OI.Share .....................................125

Battery, battery charger, and card 126

Battery and charger .................126

Using an optional AC adapter ...

Using your charger abroad .....126

Usable cards .............................127

Record mode and ﬁ le size/ number of storable still

pictures .....................................128

Interchangeable lenses 129

M.ZUIKO DIGITAL lens

speciﬁ cations .......................129

Using separately sold accessories 133

Power Battery Holder

(HLD-7) ......................................133

External ﬂ ash units designated

for use with this camera ..........134

Wireless remote control ﬂ ash

photography ........................135

Other external ﬂ ash units ........136

Principal Accessories ..............137

System chart .............................138

Pixel Mapping - Checking

the image processing

functions ..............................145

Menu directory ..........................146

Speciﬁ cations ...........................152

SAFETY PRECAUTIONS 155

SAFETY PRECAUTIONS ..........155

126

Index 166

Information 140

Shooting tips and information ...

Error codes ...............................142

Cleaning and storing

the camera ................................144

Cleaning the camera ..............144

Storage ...................................144

Cleaning and checking

the image pickup device ......144

140

Quick task index

Shooting

Taking pictures with automatic settings Easy photography with special effects Choosing an aspect ratio Quickly matching settings to the scene Pro-level photography made simple Adjusting the brightness of a photograph

Taking pictures with a blurred background Taking pictures that stop the subject in

motion or convey a sense of motion

Taking pictures with the correct color

Processing pictures to match the subject/ Taking monotone pictures

When the camera will not focus on your subject/Focusing on one area

Focusing on a small spot in the frame/ conﬁ rming focus before shooting

Recomposing photographs after focusing Turning off the beep speaker Taking photos without the ﬂ ash

Reducing camera shake

Taking pictures of a subject against backlight

Photographing ﬁ reworks

Reducing image noise (mottling)

iAUTO (A) Art ﬁ lter (ART)44 Aspect ratio 71 Scene mode (SCN)46 Live Guide 28 Exposure compensation 51

Live Guide 28 Aperture priority shooting 39 Live Guide 28 Shutter priority shooting 40 White balance 58 One-touch white balance 59 Picture Mode 70 Art ﬁ lter (ART)44 Using the touch screen 27 AF Area 54 Zoom frame AF/zoom AF 56

Zoom frame AF/zoom AF 56 C-AF+TR (AF tracking) 75

8 (Beep sound) ISO/DIS Mode 59/46

Image Stabilizer 68 Anti-Shock z Self-timer 57 Remote cable 137 Flash shooting 52 Gradation (Picture Mode) 80 Bulb/time photography 41 Live composite photography 41 Scene mode (SCN)46

Noise Reduct. 96

Quick task index

Taking pictures without white subjects appearing too white or black subjects appearing too dark

Quick task index

Optimizing the monitor/ adjusting monitor hue

Checking set effect before taking a picture

Checking horizontal or vertical orientation before shooting

Shooting with deliberate composition Zooming in on photos to check focus Self-portraits Sequential shooting Extending the useful life of the battery

Increasing the number of pictures that can be taken

Gradation (Picture Mode) 80

Histogram/

Exposure compensation

Highlight&Shadow Control 51

Monitor brightness

adjustment

Live View Boost 95

Preview function 103

Test Picture 103

Level gauge 37

Displayed Grid 95

Autoq (Rec View)

Self-timer 57

Sequential shooting 57

Sleep 96

Record mode 72

37/51

Playback/Retouch

Viewing images on a TV Viewing slideshows with background

music Brightening shadows

Dealing with red-eye Printing made easy Commercial prints

Simple photo sharing

HDMI/Video Out 95

Playback on TV 105

Slideshow 67

Shadow Adj (JPEG Edit) 89

Redeye Fix (JPEG Edit) 89

Direct printing 117

Creating a print order 116

Share Order 64

Using the camera wireless

LAN function

OLYMPUS PENPAL 113

Connection to Smartphone 90

Camera Settings

Restoring default settings Reset 79 Saving the settings Changing the menu display language

Myset 79

123

Unpack the box contents

The following items are included with the camera. If anything is missing or damaged, contact the dealer from whom you purchased the camera.

Unpack the box contents

Camera Body cap Strap USB cable

• Flash case

• Computer software CD-ROM

• Instruction manual

• Warranty card Flash

FL-LM2

Lithium ion battery

BLN-1

Attaching the strap

Thread the strap in the direction of the arrows.

Lastly, pull the strap tight making sure that it is fastened securely.

Lithium ion charger

CB-USB6

BCN-1

• Attach the other end of the strap to the other eyelet in the same way.

Preparing the camera and ﬂ ow of operations

Names of parts

1 2

3 4 5

6 7 8

9 0

1 Mode dial lock .................................P. 18

2 Rear dial* (o)

.......................P. 23, 38 – 41, 58, 60, 110

3 Fn2 button ................................P. 23, 51

4 H/R (Movie) button ......P. 33/P. 22, 103

5 Front dial* (r) ...................P. 31, 38 – 41

6 Shutter button .................................P. 21

7 Self-timer lamp/AF illuminator

...............................................P. 57/P. 93

8 Lens attachment mark ....................P. 14

9 Y (One-touch white balance) button

........................................................P. 59

0 Z (Preview) button .......................P. 103

a Mount (Remove the body cap before

attaching the lens.)

b Mode dial ........................................P. 18

c Stereo microphone .............P. 66, 76, 90

* In this manual, the r and o icons represent operations performed using the front dial

and rear dial.

d ON/OFF lever ................................P. 16

e v button

AFm (AF/Metering mode) button

............................................P. 74, 75

jYHDR (Sequential shooting/

Self-timer/HDR) button .......P. 57, 60

f External ﬂ ash connector ...............P. 136

g Microphone connector cover

h Strap eyelet.......................................P. 9

i Connector cover

j Lens release button ........................P. 14

k Lens lock pin l Microphone connector (Third-party

commercial microphones can be used.

l3.5 stereo mini-plug)

m HDMI connector (Type D) .............P. 105

n Multi-connector .............P. 105, 117, 120

b c d e

f g h

j k

1 Accessory port ..............................P. 112

2 Diopter adjustment dial ...................P. 20

3 u (LV) button ..............................P. 19

4 Monitor (Touch screen)

................................P. 16, 27, 34, 36, 62

5 Viewﬁ nder ..........................P. 19, 20, 38

6 Eye sensor

7 Eyecup ..........................................P. 137

8 Hot shoe .......................................P. 134

9 AEL/AFL button................P. 32, 51, 102

0 Lever ..................................P . 38 – 41, 94

a INFO button .............................P. 37, 62

b Fn1 button ......................................P. 54

9 0 a b

c d

e f g

c Q button ..................................P. 30, 77

d Arrow pad* ......................................P. 31

e MENU button .................................P. 77

f q (Playback) button ................P. 31, 63

g Speaker

h  (Erase) button ............................P. 33

i Tripod socket

j PBH cover.....................................P. 133

k Battery compartment cover.............P. 12

l Battery compartment lock ...............P. 12

m Card slot cover................................P. 13

n Card slot .........................................P. 13

Preparing the camera and ﬂ ow of operations

* In this manual, the FGHI icons represent operations performed using the arrow

pad.

Charging and inserting the battery

Charging the battery.

Preparing the camera and ﬂ ow of operations

Charging indicator

Charging in progress

Charging complete

Charging error

(Charging time: Up to approximately 4 hours)

y Cautions

• Unplug the charger when charging is complete.

Loading the battery.

Lights orange

Off

Blinks orange

Direction indicating mark ()

Charging indicator

Lithium ion battery

Lithium ion charger

AC cable

Battery compartment cover

AC wall outlet

Direction

indicating

mark

Closing the battery cover.

Removing the battery

Turn off the camera before opening or closing the battery compartment cover. To remove the battery, ﬁ rst push the battery lock knob in the direction of the arrow and then remove.

y Cautions

• Contact an authorized distributor or service center if you are unable to remove the battery. Do not use force.

$ Notes

• It is recommended to set aside a backup battery for prolonged shooting in case the battery in use drains.

• Also read “Battery, battery charger, and card” (P. 126).

Battery compartment lock

Inserting and removing cards

Loading the card.

• Open the card slot cover.

• Slide the card in until it is locked into place. g “Usable cards” (P. 127)

y Cautions

• Turn off the camera before loading or removing the card.

Preparing the camera and ﬂ ow of operations

Closing the card slot cover.

• Close ﬁ rmly until you hear a click.

y Cautions

• Be sure the card slot cover is closed before using the camera.

Removing the card

Press the inserted card lightly and it will be ejected. Pull out the card.

y Cautions

• Do not remove the battery or card while the card write indicator (P. 36) is displayed.

Eye-Fi Cards

Read “Usable cards” (P. 127) before use.

Attaching a lens to the camera

Attach a lens to the camera.

Preparing the camera and ﬂ ow of operations

Rear cap

• Align the lens attachment mark (red) on the camera with the alignment mark (red) on the lens, then insert the lens into the camera’s body.

• Rotate the lens clockwise until you hear it click (direction indicated by arrow 3).

y Cautions

• Make sure the camera is turned off.

• Do not press the lens release button.

• Do not touch internal portions of the camera.

Remove the lens cap.

Using lenses with an UNLOCK switch

Retractable lenses with an UNLOCK switch cannot be used while retracted. Turn the zoom ring in the direction of arrow (1) to extend the lens (2). To store, turn the zoom ring in the direction of arrow (4) while sliding the UNLOCK switch (3).

Removing the lens from the camera

While pressing the lens release button, rotate the lens in the direction of the arrow.

Lens release button

Interchangeable lenses

Read “Interchangeable lenses” (P. 129).

Attaching the ﬂ ash unit

Remove the terminal cover from the ﬂ ash unit and attach the ﬂ ash to the

camera.

• Slide the ﬂ ash unit all the way in, stopping when it contacts the back of the shoe and is securely in place.

UNLOCK switch

Preparing the camera and ﬂ ow of operations

To use the ﬂ ash, raise the ﬂ ash head.

• Lower the ﬂ ash head when the ﬂ ash is not in use.

y Cautions

• When not using the accessory port, be sure to attach the cover.

Removing the Flash Unit

Press the UNLOCK switch while removing the ﬂ ash unit.

Connector cover

UNLOCK switch

Power on

Move the ON/OFF lever to the ON position to turn on the camera.

Preparing the camera and ﬂ ow of operations

• When the camera is turned on, the monitor will turn on.

• To turn off the camera, return the lever to the OFF position.

 Monitor

2013.10.01 12:30

ISO

AUTO

Using the monitor

 ON/OFF lever

Wi-Fi

AUTO

4:3

250250 F5.6

i-Enhance

NORM

01:02:0301:02:03

Battery level

; (green): Camera ready to shoot. : (green): Low battery ] (blinks red): Charge the battery.

10231023

You can adjust the angle of the monitor.

Camera sleep operation

If no operations are performed for a minute, the camera enters “sleep” (stand-by) mode to turn off the monitor and to cancel all actions. The camera activates again when you touch any button (the shutter button, q button, etc.). The camera will turn off automatically if left in sleep mode for 4 hours. Turn the camera on again before use.

Setting the date/time

Date and time information is recorded on the card together with the images. The ﬁ le name is also included with the date and time information. Be sure to set the correct date and time before using the camera.

Display the menus.

• Press the MENU button to display the menus.

Shooting Menu 1

Card Setup

Reset/Myset

Picture Mode

Image Aspect Digital Tele-converter Off

MENU button

Select [X] in the [d] (setup) tab.

• Use FG on the arrow pad to select [d] and press I.

• Select [X] and press I.

[d] tab

Keystone Comp. Off

Back

Setup Menu

Rec View Wi-Fi Settings

c/#

Menu Display

Firmware

Back

--.--.-- --:--X English ±0 k±0

0.5sec

Preparing the camera and ﬂ ow of operations

4:3

Set

Set the date and time.

• Use HI to select items.

• Use FG to change the selected item.

• Use FG to select the date format.

Save settings and exit.

• Press Q to set the camera clock and exit to the main menu.

• Press the MENU button to exit the menus.

YMDTime

2013

Cancel

The time is displayed using a 24-hour clock.

Y/M/D

Setting the shooting mode

Use the mode dial to select the shooting mode.

Preparing the camera and ﬂ ow of operations

A full auto mode in which the camera automatically optimizes settings for the

current scene. The camera does all the work, which is convenient for beginners. Aperture and shutter speed are automatically adjusted for optimal results.

You control aperture. You can sharpen or soften background details.

You control shutter speed. You can express the motion of moving subjects, or

freeze motion without any blur. You control aperture and shutter speed. You can shoot with long exposures for

ﬁ reworks or other dark scenes. Select an art ﬁ lter.

ART

Select a scene according to the subject.

SCN

You can shoot a PHOTO STORY. Shoot with selected PHOTO STORY type.

Shoot movies using shutter speed and aperture effects and movie special effects.

First, try taking photographs in full auto mode.

Press the mode dial lock to release the lock and set the mode dial to A.

• When the mode dial lock has been pressed down, the mode dial is locked. Each time you press the mode dial lock, it switches between locked/released.

Indicator Mode icon

Mode dial lock

 Monitor

Wi-Fi

2013.10.01 12:30

ISO

ISO sensitivity

AUTO

250250 F5.6

Shutter speed Aperture value

i-Enhance

4:3

NORM

01:02:0301:02:03

10231023

Available recording time

Number of storable still pictures

Selecting a shooting method

With this camera, you can select between two shooting methods: Shooting using the viewﬁ nder and shooting using live view with the monitor. Press the u button to switch between shooting methods. In addition, you can set various shooting functions using the super control panel, live control, and LV super control panel, depending on the shooting method.

Preparing the camera and ﬂ ow of operations

Shooting using the viewﬁ nder

 Monitor

Lights up when you move your eye away from the viewﬁ nder.

Wi-Fi

2013.10.01 12:30

ISO

AUTO

250250 F5.6

NORM

4:3

01:02:0301:02:03

0.00.0

10231023

Super control panel

Cursor

ISO

AUTO

250250 F5.6

When setting shooting functions, if you press the Q button, a cursor will appear on the super control panel. Touch the function you want to set.

NORM

4:3

01:02:0301:02:03

10231023

button

 Viewﬁ nder

Automatically lights up when your eye moves close. When the viewﬁ nder is lit up, the monitor turns off.

01:02:03

ISO-A

250F5.6 0.00.0

200

1023

S-IS AUTOS-IS AUTO

WBWBWB

AUTO

AUTOAUTOAUTO

4:3

FullHD

WB Auto

AUTOAUTO

If you press the Q button while the viewﬁ nder is lit up, Live Control will be displayed in the viewﬁ nder. (During A mode, a live guide is displayed.)

Shooting using live view

 Monitor

Wi-Fi

ISO-A

200

0.00.0

250250 F5.6

01:02:0301:02:03

S-IS AUTOS-IS AUTO

FullHD

3838

Live view display

S-IS AUTOS-IS AUTO

WBWBWB

AUTO

AUTOAUTOAUTO

AUTO

AUTOAUTOAUTO

4:3

WB Auto

AUTOAUTO

When setting shooting functions, if you press the Q button, live control will be displayed and you can select a function by turning the rear dial.

FullHD

ISO

AUTO

250250 F5.6

NORM

4:3

01:02:0301:02:03

10231023

Shooting using the viewﬁ nder

Shooting

Each time you press the u button, you can switch between shooting with the viewﬁ nder and shooting with live view. When shooting with the viewﬁ nder, the super

control panel will be displayed on the monitor.

Shooting using the viewﬁ nder

Shooting still pictures

button

Viewﬁ nder

If the display in the viewﬁ nder looks blurry

Look through the viewﬁ nder and rotate the diopter adjustment dial until the display is in sharp focus.

Set up the camera and decide on the composition.

• The viewﬁ nder turns on and the monitor turns off automatically when you put your eye to the viewﬁ nder.

• Be careful that your ﬁ ngers or the camera strap do not obstruct the lens.

Wi-Fi

2013.10.01 12:30

ISO

AUTO

250250 F5.6

Super control panel

i-Enhance

NORM

4:3

01:02:0301:02:03

10231023

Horizontal grip Vertical grip

Lightly press the shutter button down to the ﬁ rst position. (Press halfway.)

• The AF conﬁ rmation mark (() will be displayed, and a green frame (AF target) will be displayed in the focus location.

AF target

Press the shutter button halfway.

AF conﬁ rmation mark

250 F5.6

Aperture value

Shutter speed

• The ISO sensitivity, shutter speed and aperture value that have been set automatically by the camera are displayed.

• If the AF conﬁ rmation mark blinks, the subject is not in focus. (P. 140)

Press the shutter button again to take a picture. (Press all the way down.)

• The shutter sounds and the picture is taken.

• The shot image will be displayed on the monitor.

Pressing the shutter button halfway and all the way down

The shutter button has two positions. The act of lightly pressing the shutter button to the ﬁ rst position and holding it there is called “pressing the shutter button halfway,” that of pressing it all the way down to the second position “pressing the shutter button all (or the rest of) the way down.”

Press halfway

Press the rest of

the way down

y Cautions

• You can change the viewﬁ nder display style. In this manual, [Style 1] is used. g [Built-in EVF Style] (P. 100)

• Auto viewﬁ nder selection is not available if the angle of the monitor has been changed.

• To display a menu of auto viewﬁ nder selection options, press and hold the u button. g [EVF Auto Switch] (P. 100)

Shooting using the viewﬁ nder

01:02:03

ISO-A

200

1023

Recording movies

You can record movies in all shooting modes except J (PHOTO STORY). First, try recording in full auto mode.

Set the mode dial to A.

Press the R button to begin recording.

Shooting using the viewﬁ nder

• The image being shot is displayed on the monitor.

• If you look through the viewﬁ nder, the image being recorded will be displayed.

• You can change the focus location by touching the screen while recording (P. 27).

Press the R button again to end recording.

• When shooting is complete, the super control panel will be displayed on the monitor.

Displayed during recording

y Cautions

• When using a camera with a CMOS image sensor, moving objects may appear distorted due to the rolling shutter phenomenon. This is a physical phenomenon whereby distortion occurs in the ﬁ lmed image when shooting a fast-moving subject or due to camera shaking. In particular, this phenomenon becomes more noticeable when using a long focal length.

• If the camera is used for extended periods, the temperature of the image pickup device will rise and noise and colored fog may appear in images. Turn off the camera for a short time. Noise and colored fog may also appear in images recorded at high ISO sensitivity settings. If the temperature rises further, the camera will turn off automatically.

• When using a Four Thirds system lens, the AF will not operate while recording movies.

 Taking photographs during movie recording

• Press the shutter button during movie recording to pause movie recording and take a photograph. Movie recording restarts after the photograph is taken. Press the R button to end recording. Three ﬁ les will be recorded to the memory card: the movie footage preceding the photograph, the photograph itself, and the movie footage following the photograph.

• Only one photograph can be taken at a time during movie recording; the self-timer and ﬂ ash cannot be used.

y Cautions

• Image size and quality for photographs are independent of movie frame size.

• The autofocus and metering used in movie mode may differ from that used to take photographs.

• The R button cannot be used to record movies in the following instances:

Multiple exposure (still photography also ends.)/shutter button pressed halfway/ during bulb, time or composite photography/sequential shooting/Panorama/SCN mode (e-Portrait, Hand-Held Starlight, 3D)/time lapse shooting

R button

00:02:1800:02:18

Recording time

Setting shooting functions

Using the Multi-function button

When framing pictures in the viewﬁ nder, you can adjust settings quickly using the multi-function button. At default settings, the Fn2 button is assigned the role of the multi-function button.

 Choosing a function

Press and hold the Fn2 button and rotate the dial.

• The menus are displayed.

Keep rotating the dial to select the desired function.

• Release the button when the desired function is selected.

 Using multifunction options

Press the Fn2 button. An option selection dialog will be displayed.

[a] assigned to Fn2 button

Fn2

Press and hold

Q/Fn2

Shooting using the viewﬁ nder

01:02:03

ISO-A

250F5.6

200

1023

Fn2

Other option assigned to Fn2 button

HI LIGHT

SHADOW

250F5.6 0.00.0

Highlight and shadow

control options

01:02:03

ISO-A

200

1023

Function

b (Highlight and shadow control) (P.51) c (Color Creator) (P.60)

a (Zoom frame AF/zoom AF) (P.56)

d (Image Aspect) (P.71)

01:02:03

ISO-A

250F5.6

200

1023

Zoom frame AFShooting display

250F5.6

Zoom AF

ISO-A

01:02:03

ISO-A

200

1023

4:3

Aspect ratio optionsColor Creator option

Front dial (r) Rear dial (o)

Highlight control Shadow control

Hue Saturation

Zoom frame AF: Exposure compensation

Zoom AF: Zoom in or out

Select an option

Using the super control panel

When shooting using the viewﬁ nder, the super control panel will be displayed on the monitor. Set your main shooting functions using the super control panel.

Super control panel display

ISO

Shooting using the viewﬁ nder

ISO

AUTO

4 5

250250 F5.6

Settings that can be modiﬁ ed using the super control panel

1 Currently selected option

2 ISO sensitivity .................................P. 59

3 Flash mode .....................................P. 52

4 Flash intensity control .....................P. 73

5 Sequential shooting/self-timer ........P. 57

6 White balance .................................P. 58

White balance compensation

7 Picture mode...................................P. 70

8 Sharpness N..................................P. 80

Contrast J .....................................P . 80

Saturation T .................................P. 80

Gradation z...................................P. 80

B&W Filter x .................................P . 80

Picture tone y ...............................P . 81

y Cautions

• Not displayed in SCN, J, or n modes.

Press the Q button.

• The cursor appears. You can also double tap (touch twice in quick succession) to display the cursor.

Touch the function you wish to set.

• The cursor appears over the function you touched.

Turn the front dial and select a setting value.

7 8

NORM

4:3

2.0+2.0

01:02:0301:02:03

10231023

0cdfe b

9 Color space.....................................P. 98

0 Button function assignment ....P. 94, 103

a Face priority ....................................P. 55

b Metering mode ................................P. 74

c Aspect ratio .....................................P. 71

d Record mode ..................................P. 72

e AF mode .........................................P. 75

AF target .........................................P. 54

f Image stabilizer...............................P. 68

Cursor

ISO

AUTO

4:3

250250 F5.6

NORM

01:02:0301:02:03

10231023

$ Notes

• You can display menus for each function by selecting a function and pressing Q.

Shooting using live view

Shooting

You can switch between shooting using the viewﬁ nder and shooting using live view by pressing the u button. When shooting using live view, the subject is displayed on the monitor.

button

Wi-Fi

ISO-A

200

Shooting using live view

250250 F5.6

Monitor

01:02:0301:02:03

3838

Shooting still pictures

Set up the camera and decide on the composition.

• Be careful not to cover the lens with a ﬁ nger or the camera strap.

Touch the area of the subject you want to focus

on.

• The camera focuses on the area you touched and automatically takes a photograph.

• The recorded image is displayed on the monitor.

Wi-Fi

ISO-A

200

250250 F5.6

$ Notes

• You can also use the shutter button to take a photograph, just as you would when shooting using the viewﬁ nder.

• You can also press the shutter button after the camera focuses on the area you touched to take a photograph. g “Using the touch screen” (P. 27)

• To display a menu of auto viewﬁ nder selection options, press and hold the u button. g [EVF Auto Switch] (P. 100)

01:02:0301:02:03

3838

Recording movies

You can record movies in all shooting modes except J (PHOTO STORY). First, try recording in full auto mode.

Set the mode dial to A.

Press the R button to begin recording.

• You can change the focus location by touching the screen while recording (P. 27).

Shooting using live view

Press the R button again to end recording.

Displayed during recording

y Cautions

• When using a Four Thirds system lens, the AF will not operate while recording movies.

 Taking photographs during movie recording

• Only one photograph can be taken at a time during movie recording; the self-timer and ﬂ ash cannot be used.

y Cautions

• Image size and quality for photographs are independent of movie frame size.

• The autofocus and metering used in movie mode may differ from that used to take photographs.

• The R button cannot be used to record movies in the following instances:

Multiple exposure (still photography also ends.)/shutter button pressed halfway/during bulb, time or composite photography/sequential shooting/Panorama/SCN mode (e-Portrait, Hand-Held Starlight, 3D)/time lapse shooting

R button

00:02:1800:02:18

Recording time

Using the touch screen

When shooting using live view, touch panel functions can be used.

Selecting a focusing method

You can focus and shoot by tapping the monitor. Tap

to cycle through touch screen settings.

Touch screen operations disabled.

Tap a subject to focus and automatically

release the shutter. This function is not available in n mode.

Tap to display an AF target and focus on the

subject in the selected area. You can use the touch screen to choose the position and size of the focus frame. Photographs can be taken by pressing the shutter button.

Wi-Fi

ISO-A

200

250250 F5.6

01:02:0301:02:03

Shooting using live view

3030

 Previewing Your Subject ( V )

Tap the subject in the display.

• An AF target will be displayed.

• Use the slider to choose the size of the frame.

• Touch S to turn off the display of the AF target.

Use the slider to choose the size of the target

ISO-A

200

Off

250250 F5.6

frame, and then tap Y to zoom in on the subject of the target frame.

• Use your ﬁ nger to scroll the display when the picture is zoomed in.

• Tap Z to cancel the zoom display.

y Cautions

• When using a Four Thirds system lens, the range within which auto focus is possible decreases. If you touch the screen outside of the possible range, the camera shoots without using AF.

Using the wireless LAN function

You can connect the camera to a smartphone and control the camera over Wi-Fi. To use this function, you must have the relevant app installed on the smartphone. g “Using the camera wireless LAN function” (P. 123), “Things you can do with OI.Share” (P. 125)

Wi-Fi

ISO-A

200

250250 F5.6

1414

1010

S-IS AUTOS-IS AUTO

01:02:0301:02:03

3030

Setting shooting functions

Using live guides

Live guides are available in iAUTO (A) mode. While iAUTO is a full auto mode, live guides make it easy to access a variety of advanced photographic techniques.

Set the mode dial to A.

Touch the tab to display live guides.

Shooting using live view

• Select a guide item and touch it to set that item.

Wi-Fi

ISO-A

200

Tab

Guide item

Change Color Saturation

250250 F5.6

Use your ﬁ nger to position the sliders.

• Tap a to enter the setting.

• To cancel the live guide setting, tap k on the screen.

• If [Shooting Tips] is selected, highlight an item and press Q to view a description.

• The effect of the selected level is visible in the display. If [Blur Background] or [Express Motions] is selected, the display will return to normal, but the selected effect will be visible in the ﬁ nal photograph.

Repeat Steps 2 and 3 as necessary to select

additional guides.

• Selected guides are indicated by a v icon.

Shoot.

• To clear the live guide from the display, press the MENU button.

01:02:0301:02:03

3838

Cancel

Level bar/selection

Clear & Vivid

Cancel Set

Flat & Muted

Change Color Saturation

$ Notes

• Live guides can also be used when shooting using the viewﬁ nder. When shooting using the viewﬁ nder, settings are made using the dial and buttons. If you press the Q button, the live guide is displayed, and the rear dial is used to select items and operate the sliders.

y Cautions

• [Blur Background] and [Express Motions] can not be used together.

• If [RAW] is currently selected for image quality, image quality will automatically be set to [YN+RAW].

• Live guide settings are not applied to the RAW copy.

• Pictures may appear grainy at some live guide setting levels.

• Changes to live guide setting levels may not be visible in the monitor.

• Frame rates drop when [Blurred Motion] is selected.

• The ﬂ ash cannot be used with the live guide.

• Choosing live guide settings that exceed the limits of the camera exposure meters may result in pictures that are over or underexposed.

Shooting using live view

Using live control

When shooting using live view, live control can be used to set functions in P, A, S, M, n, and J modes. Using live control allows you to preview the effects of different

settings in the monitor.

S-IS AUTOS-IS AUTO

WBWBWB

AUTO

AUTOAUTOAUTO

AUTO

AUTOAUTOAUTO

Shooting using live view

WB Auto

AUTOAUTO

4:3

FullHD

Functions

Settings

 Available settings

Image stabilizer ....................................P. 68

Picture mode ........................................P. 70

Scene mode .........................................P. 46

Art ﬁ lter mode .......................................P. 44

n mode ...............................................P. 71

White balance .......................................P. 58

Sequential shooting/self-timer ..............P. 57

Aspect ratio...........................................P. 71

Press Q to display the live control.

Record mode ........................................P. 72

Flash mode ...........................................P. 52

Flash intensity control ...........................P. 73

Metering mode......................................P. 74

AF mode ...............................................P. 75

ISO sensitivity .......................................P. 59

Face priority ..........................................P. 55

Movie sound record ..............................P. 76

• To hide the live control, press Q again.

Use the rear dial to select the

settings, use the front dial to change the selected setting,

Displays the selected function name

Cursor

and press Q.

• The selected settings take effect automatically if no operations are performed for about 8 seconds.

Cursor

AUTOAUTO

WB Auto

AUTOAUTO

Arrow pad

y Cautions

• Some items are not available in some shooting modes.

$ Notes

• Live control can also be used when shooting using the viewﬁ nder. If you press the Q button during viewﬁ nder display, live control will be displayed in the viewﬁ nder. If the viewﬁ nder is switched off while shooting is in progress, live control will also be canceled.

S-IS AUTOS-IS AUTO

WBWBWB

AUTO

AUTOAUTOAUTO

AUTO

AUTOAUTOAUTO

Arrow pad

4:3

FullHD

+ 140 hidden pages

Olympus V207010SU000 User manual

Specifications and Main Features

Frequently Asked Questions

User Manual

Table of Contents

Quick task index

Shooting using live view