Olympus SP-500 UZ User Manual
1AG6P1P2778-- VH253801
1600
1200
SQ1
1600
1200
SQ1
1600
1200
SQ1
BEFORE YOU BEGIN
Gather these items (box contents)
SP-500 UZ
Quick Start Guide
GET STARTED
a. Attach the strap and
lens cap
1
3
Start Here
2
4
Digital Camera Strap AA (R6) Alkaline Batteries
For more information, please refer to the Basic & Advanced
Manuals or visit: www.olympusamerica.com/support
Items not shown: Advanced Manual (CD-ROM), Basic Manual, warranty card. Contents may vary depending on purchase location.
b. Insert the batteries
Lens Cap/
Lens Cap String
(four)
USB Cable
c. Set the date and time
1 Set the mode dial to h, and press the
POWER button to turn the camera on.
AV Cable OLYMPUS Master
Software CD-ROM
POWER Button
Mode Dial
2 Press Z to display the top menu, and select
1
Unlock
2
3
Lift
Slide
4
Insert
[MODE MENU] > [SETUP] > [X].
3 Press s/r to set an item. Press p/q to
select the next field.
PIXEL MAPPING
MEM
DUAL TIME
SETUP
m/ft
’05.01.01
00:00
OFF
m
Operation guide
SETUP
SELECT
Z Button
2005
.
01
Y M D
00
GOSET
.
01
:
00
Date format
OK
TAKE A PICTURE
1 Using the monitor, place the AF target
mark over your subject.
a. Zoom
Zoom Out: Zoom In:
Green Lamp
SQ1
AF Target Mark
×
1200
2 Press and hold the shutter button halfway
to lock the focus.
SQ1
×
1200
441600
SQ1
×
441600
1200
The green lamp indicates the focus and
exposure are locked.
REVIEW OR ERASE A PICTURE
a. Press the QUICK VIEW button
The last picture taken will be displayed. Pull the zoom lever
Zoom Lever
QUICK VIEW
Button
Previous
Picture
Arrow Pad
Next
Picture
b. Take a closer look
toward T or W to
zoom in or out.
Press Z to return
to the original size.
Press the arrow pad
(s/r/p/q) to
scroll around.
Press the QUICK VIEW button
again to return to shooting
mode.
b. Focus
441600
1 Display the picture you want to erase.
2 Press the S button.
3 Select [YES], and press Z.
c. Take the picture
1 Press the shutter
(Pressed Halfway)
Shutter Button
(Pressed Completely)
c. To erase a picture
S Button
The picture is permanently erased.
button completely to
take the picture.
Shutter Button
ERASE
YES
SELECT
NO
GO
CAMERA DIAGRAM
Strap Eyelet
DC-IN Jack
Card Cover
Card Slot
POWER Button
Viewfinder
# Button (Flash pop-up)
DISP./GUIDE Button
QUICK VIEW Button
Z Button (OK/MENU)
OK
Monitor
Tripod Socket
Shutter Button
Microphone
Self-Timer Lamp/
AF Illuminator
Multi-Connector
Flash Strap Eyelet
Lens
Speaker Connector Cover
Zoom Lever
Mode Dial
[ Button/
Custom Button
< Button (Print)
u Button
(Monitor/Viewfinder)
# Button (Flash Mode)
S Button (Erase)
Card Access Lamp
Arrow Pad
(s/r/p/q)
Battery Compartment
Lock
Battery Compartment
Cover
TRANSFER IMAGES
a. Install the software
1 Insert the OLYMPUS Master CD-ROM.
2 Windows:
Click the “OLYMPUS
Master“ button.
Macintosh:
Double-click the “Installer“
icon.
3 Simply follow the on-screen
instructions.
Remember to register your camera when you install OLYMPUS
Master or visit:
www.olympusamerica.com/prodreg
Printed in Japan © 2005
b. Connect the camera to the computer
1 Connect the camera and computer using the USB cable (included).
The monitor will turn on automatically.
1
SELECT
2
USB
P C
EASY PRINT
CUSTOM PRINT
EXIT
GO
USB Cable
2 Select [PC] on the monitor, and press Z.
Your PC will now recognize your camera as a
removable storage drive.
OK
c. Transfer images to the computer
1 With the camera now connected,
open OLYMPUS Master.
The [Transfer Images] window is
displayed.
2 Select the images you want to
transfer, and click the [Transfer
Images] button.
If the [Transfer Images] window is not
displayed automatically:
a. Click the “Transfer Images” icon
on the OLYMPUS Master main
menu.
b. Click the “From Camera” icon.
[Transfer Images] window
[Transfer Images]
button
Loading...