Thank you for purchasing an Olympus digital camera. Before you start to use your new
camera, please read these instructions carefully to enjoy optimum performance and a
longer service life. Keep this manual in a safe place for future reference.
We recommend that you take test shots to get accustomed to your camera before taking
important photographs.
In the interest of continually improving products, Olympus reserves the right to update or
modify information contained in this manual.
The screen and camera illustrations shown in this manual were produced during the
development stages and may differ from the actual product.
Detailed explanation for each function such
as camera buttons and menus is separately
provided.
How to use this manual
Search for a topic XXXTable of Contents
Contents
How to use this manual...............................................................................2
The camera does not turn on even when a battery is loaded
The battery is not fully charged
• Charge the battery with the charger.
The battery is temporarily unable to function because of the cold
• Battery performance declines in low temperatures, and the charge may not be
sufficient to turn on the camera. Remove the battery and warm it by putting it
in your pocket for a while.
2
No picture is taken when the shutter button is pressed
Contents
How to use this manual ...............................................................................2
Set the mode dial to K or s, and lightly press the shutter button (halfway).
The green lamp lights when the focus and exposure are locked (focus lock). Now
press the shutter button all the way (fully) to shoot a picture.
Green lamp
P
Locking the focus and then composing the
shot (focus lock)
Compose your picture with the focus locked, and
then fully press the shutter button to shoot a picture.
ʼnŒʼnŒĴijķĵ
[]
ȿijĵĵĹ
[
• When the green lamp blinks, the focus is not
adjusted properly. Try locking the focus again.
]
IN
44
Recording movies
Set the mode dial to n, and lightly press the shutter button to lock the focus, and
then press the shutter button fully to start recording. Press the shutter button
again to stop recording.
[
]
IN
44
8
3 Mode dialSwitching between shooting and playback modes
00:36
Set the mode dial to the desired shooting or playback mode.
K Shooting still pictures
The camera determines the optimum settings and shoots the picture.
s
Shoot pictures by selecting a scene according to the situation
You can shoot pictures by selecting a scene according to the situation.
Select the scene/change the scene to another one
• Press the m button to select [SCN] from the top menu, and change it to
another scene.
• By switching to the other scene, most settings will be changed to the default
settings of each scene.
g Follow the shooting guide for setting
GUIDE SHOOTINGIJİĴ
IJ
Brightening subject.
ij
Shooting into backlight.
Ĵ
Set particular lighting.
Blurring background.
ĵ
Ķ
Adjusting area in focus.
SET
Follow the shooting guide displayed on the screen to
set the target items.
• To change the setting without using the shooting
guide, set the shooting mode to another one.
• The content set using the shooting guide will change
to the default setting by pressing the m button
OK
or changing the mode using the mode dial.
n Recording movies
Audio is recorded with the movie.
A
00:36
00:36
This lights red during movie recording.
The remaining recording time is displayed.
When the remaining recording time reaches 0,
recording stops.
1
Button operations
q Viewing still pictures/Selecting playback mode
The last picture taken is displayed.
• Press the arrow pad (1243) to view other pictures.
• Use the zoom button to switch among close-up playback, index display and
calendar display.
g Movie playback “MOVIE PLAY Playing back movies” (P. 25)
9
76
őİłŖŕŐ
5
4
1
4 Arrow pad (1243)
Use the arrow pad to select scenes, playback picture, and the items on the menus.
5 o button (OK/FUNC)
Button operations
Displays the function menu and sets the functions often used in shooting mode.
This button is also used to confirm your selection.
The functions you can set with the function menu
P/AUTO
.............................................. Shooting pictures with automatic settings
Select the shooting mode when you have set the mode dial to K.
P (Program auto)The camera automatically sets the optimum aperture value
and shutter speed for the brightness of the subject.
AUTO (Full auto mode) The camera automatically sets white balance and ISO
sensitivity in addition to the aperture and shutter speed.
g “WB Adjusting the color of a picture” (P. 21)
“ISO Changing the ISO sensitivity” (P. 21)
“DRIVE Continuous shooting” (P. 22)
“ESP/n Changing the area for measuring the brightness of a subject”
(P. 22)
Function menu
P
P
WB
AUTO
ISO
AUTO
o
őİłŖŕŐ
ESP
h
P
43: Select a setting, and press o.
1
: Select the setting items.
2
10
6 m button (MENU)
3264
2448
HQ
3264
2448
HQ
IN
IJijĻĴ ı
Ĩı ķįı Ĵį ijķ
IJı ı Įı ı ıĵ
ʼnŒ
IN
IN
IN
IN
ŔŖŏ
ŎŐŏ
ijııķ
ŕŖņ
ŘņŅ
ŕʼnŖ
ŇœŊ
Ŕłŕ
IJĴIJĵIJĵIJĶIJĶIJķIJķIJĸIJĸ
IJĺ
IJĹ
ijĵ
ijķ
ijĶ
ĴIJ
IJIJ
IJij
IJı
IN
Displays the top menu.
7 Zoom buttonZooming while shooting/close-up playback
Shooting mode: Zooming in on your subject
Optical zoom: 3×
Zoom out:
Press W on the
zoom button.
3264
HQ
44
2448
×
3264
2448
HQ
×
Zoom in:
Press T on the
zoom button.
44
1
Button operations
Playback mode: Switching the picture display
Single-frame playback
•
Use the arrow pad (
[
]
IN
ĨıķįıĴįijķ
ŔŖŏ
ŎŐŏ
ŕŖņ
ijııķ
ijķijķijĸijĸijĹijĹIJ ij Ĵ
Ĵ
Ķ ķ ĸ
IJĴ
IJij
IJĺ
ijıijıijIJijIJijijijijijĴijĴijĵ
ijķ
ijĸijĸijĹijĹijĺijĺĴıĴıĴIJ
ij
Ĵ
[
]
IN
T
[
]
IN
IJ
ĵĶķ
ĸĹĺ
T
[
]
IN
T
[
]
IN
IJij
Ĵ
ijĴ
ĵ
W
Index display
• Use the arrow pad
(1243) to select a
picture for playback, and
press o to play back the
single-frame of the
W
picture selected.
W
W
ŘņŅ
Ĺ ĺ IJı
ĵ Ķ ķ
IJijĻĴı
IJııĮıııĵ
ŕʼnŖ
ŇœŊ
1243
ʼnŒ
) to browse pictures.
TW
WT
ĵ
Close-up playback
• Press T to incrementally
enlarge the picture up to 10
times the original size. Press
W to reduce the size.
• Press the arrow pad
(1243) during close-up
playback to scroll the picture
in the indicated direction.
• When returning to the singleframe playback, press o.
Calendar display
Ŕłŕ
ĵ
• Use the arrow pad (1243)
IJIJ
to select the date, and press
IJĹ
ijĶ
o or T on the zoom button to
IJ
display the pictures on the
[
]
IN
date selected.
11
Ĵijķĵ
ijĵĵĹ
IN
a
c
8
b
1
9
0
Self-timer
Macro mode/
Super macro
mode
P
ʼnŒʼnŒĴijķĵ
8 3# buttonFlash shooting
Press the 3# button in shooting mode to select the flash mode.
Press o for setting.
Flash mode
[ ]
ȿijĵĵĹ
[
]
IN
44
AUTO (Auto-flash)The flash fires automatically in low light or backlight
Button operations
conditions.
! Red-eye reduction flashThis emits pre-flashes for red-eye reduction.
# Fill-in flashThe flash fires regardless of the available light.
$ Flash offThe flash does not fire even in low light conditions.
9 4& buttonShooting pictures close to the subject
Press the 4& button in shooting mode to select the macro mode.
Press o for setting.
& Macro modeThis mode lets you shoot from as close as
30cm/11.8 in. (when the zoom is set for the
zoom-out angle) and as close as 50cm/19.6
in. (when the zoom is set for the zoom-in
angle) to your subject.
% Super macro modeThis mode lets you shoot from as close as
10cm/3.9 in. to your subject.
0 2Y buttonSelf-timer shooting
Press the 2Y button in shooting mode to select on and off of the self-timer.
Press o for setting.
Y ONAfter the setting, press the shutter button fully.
Y OFFCancel the self-timer.
• The self-timer lamp lights for approximately 10 seconds, blinks for
approximately 2 seconds, and then the picture is taken.
• To cancel the self-timer, press the 2Y button.
• Self-timer shooting is automatically canceled after one shot.
12
a 1F buttonChanging picture brightness
ijįı
P
ĬĬġ
Ĭġ
ijįı
ijįı
OK
SET
Activate the setting
contents.
Press the 1F button in shooting mode to adjust the
exposure.
• Adjustable from - 2.0EV to +2.0 EV
3: Brighten
4: Darken
b S buttonErasing pictures
In playback mode, select the picture you want to erase, and press the S button.
• Once erased, pictures cannot be restored. Check each picture before erasing
to avoid accidentally erasing pictures you want to keep.
g“0 Protecting pictures” (P. 29)
c h/P buttonStabilizing digital image /Printing pictures
h Stabilizing digital image
Shooting mode: Shooting with digital image stabilization mode
This function stabilizes the blur caused by a moving subject or camera
movement when taking pictures. To use this function, press the h/< button in
shooting mode.
• Shooting in a dark environment makes ISO higher, which may increase
electrical noise, causing a rough image.
• By switching to the other mode, most settings will be changed to the default
settings of each mode.
Playback mode: Stabilizing the recorded digital image
If the recorded digital image has any blur incurred by camera movement, the
image will be stabilized and saved as a new one. Press the h/< button in the
playback mode and press the o button.
• Pictures shot by the camera other than this camera or pictures edited by the
PC cannot be fixed.
1
Button operations
< Printing pictures
When the printer is connected to the camera, display a picture to be printed out
in playback mode, and press the h/< button.g“EASY PRINT” (P. 41)
13
1
IJijĻĴ ı
Ĩıķ įı Ĵį ijķ
IJı ıĮ ı ıı ĵ
ʼnŒ
IN
ŊŔŐġĵıı
IJijĻĴ ı
Ĩıķ įı Ĵį ijķ
IJı ıĮ ı ıı ĵ
Ĭijįı
ʼnŒ
Ĵijķĵ
ijĵĵĹ
IN
ŊŔŐġĵıı
IJijĻĴ ı
Ĩıķ įı Ĵį ijķ
Ĭijįı
ʼnŒ
IN
ŊŔŐġIJķıı
Ĵijķĵ
ijĵĵĹ
Ĭijįı
IN
ŊŔŐġIJķıı
Ĵijķĵ
ijĵĵĹ
Ĭijįı
IN
IN
d
d O button
Changing the information on display /Display the menu guide
Changing the information displays
Press the O button to change the display in the following order.
Shooting mode
Playback mode
Button operations
ŊŔŐġIJķıı
%
o
n
ŊŔŐġIJķıı
%
o
n
P
ʼnŒʼnŒĴijķĵ
P
ʼnŒʼnŒĴijķĵ
P
[ ]
ȿijĵĵĹ
[ ]
[ ]
ȿijĵĵĹ
[ ]
Normal display
Ĭijįı
$
R
l
[
]
k
IN
44
Simple display
FRAME
Ĭijįı
$
ASSIST
(Horizontal and
R
l
vertical lines or
[
]
k
IN
44
diagonal lines)
Histogram
display
[
]
IN
44
*1
*1*2
*1*2
ĨıķįıĴįijķ
[
[
[
IN
IN
IN
]
ĨıķįıĴįijķ
]
ĨıķįıĴįijķ
]
IJijĻĴı
IJijĻĴı
IJııĮıııĵ
Ĵijķĵ
ȿijĵĵĹ
Ĭijįı
ŊŔŐġĵıı
IJijĻĴı
IJııĮıııĵ
Ĭijįı
ŊŔŐġĵıı
ʼnŒ
ĵ
ʼnŒ
ĵ
ʼnŒ
ĵ
Normal display
Detailed display
No information
display
Histogram
*1
display
*1
Not displayed in case of n.
*2
14
Not displayed when the mode is set [OFF] in the menu.
g “u Display the histogram” (P. 39)
“FRAME ASSIST Display the frame assist/Decide the type” (P. 39)
Displaying the menu guide
ES P/
ESP/
n
Sets picture brightness
for taking pictures.
With menu items selected, hold down the O button to
display the menu guide. Release the O button to close
the menu guide.
1
Button operations
15
2 Menu operations
SCN
Ŕ ņ ŕ Ŗ ő
RESET
IMAGE
QUALITY
SCN
ńłŎņœł
ŎņŏŖ
INDEX
SLIDESHOW
EDIT
ERASE
SETUP
CALENDAR
PLAYBACK
MENU
PRINT
ORDER
ALBUM
CA MER A M ENU
PL AYBA CK ME NU
Menu operations
2
MENU
o
Shooting modes
button
Mode Dial
Arrow pad
(1243)
2
About the menus
Playback mode
Press the m button to display the top menu.
The items displayed on the top menu differ according to the mode.
• When the mode dial is set at g, press the m button to display the
shooting guide screen.
Menu operations
Top menu in the
shooting mode
IMAGE
IMAGE
QUALITY
QUALITY
ńłŎņœł
ńłŎņœł
RESET
RESET
ŎņŏŖ
ŎņŏŖ
SCN
SCN
SCN
MENU
EXIT
IJ
WB
ij
ISOAUTO
DRIVE
DIGITAL ZOOM
MENU
BACK
AUTO
o
ESP
OFF
SET
ŔņŕŖő
ŔņŕŖő
OK
SET
• When [CAMERA MENU], [PLAYBACK
MENU], [EDIT], [ERASE], or [SETUP] is
selected, the menu corresponding to the
respective functions is displayed.
OK
Top menu in the
playback mode
SLIDE-
SLIDE-
EDIT
EDIT
SHOW
SHOW
PLAYBACK
PLAYBACK
CALENDAR
CALENDAR
MENU
MENU
INDEX
INDEX
ERASE
ERASE
MENU
EXIT
0
y
R
ALBUM ENTRY
MENU
BACK
PRINT
PRINT
P
ORDER
ORDER
SETUP
SETUP
ALBUM
ALBUM
SET
OFF
ˌɋ
SET
OK
OK
16
Menu displayed when
[CAMERA MENU]
is selected
Menu displayed when
[PLAYBACK MENU]
is selected
Using the menus
SCN
Ŕ ņ ŕ Ŗ ő
RESET
IMAGE
QUALITY
SCN
ńłŎņœł
ŎņŏŖ
CA MER A M ENU
CA MER A M ENU
Use the arrow pad (1243) and o to set menu items.
This explains how to use the menus with the [AF MODE] setting as an example.
Set the mode dial to the desired mode.
• In this case, set the mode dial to K.
1 Press the m button to
display the top menu, and
then press o.
• [AF MODE] is on a menu in
[CAMERA MENU]. Press o.
• To display other menus, use the
arrow pad (1243) to select a
menu, and press o.
• To close the top menu, press the
m button.
Top menu
IMAGE
IMAGE
QUALITY
QUALITY
ńłŎņœł
ńłŎņœł
ŔņŕŖő
ŎņŏŖ
ŎņŏŖ
SCN
SCN
SCN
ŔņŕŖő
SET
OK
Operation
guide
m button
RESET
RESET
MENU
EXIT
1243 on
the arrow pad
o
2 Press 12 to select a setting,
and press o.
• [AF MODE] is the sixth menu
item, so press 2 five times, and
then press o.
• Unavailable settings cannot be
selected.
o
m button
This mark is
displayed when
there are more
menu items on
the next page.
The selected
item is
displayed in a
different color.
IJ
WB
ij
ISOAUTO
DRIVE
DIGITAL ZOOM
MENU
BACK
2
IJ
AF MODESPOT
ij
R
PANORAMA
MENU
BACK
AUTO
o
ESP
OFF
SET
OFF
SET
1
2
Menu operations
OK
o
o
OK
17
3 Press 12 to select a setting,
CA MER A M ENU
CA MER A M ENU
2
Menu operations
and press o.
• Select the [AF MODE] from
[iESP] and [SPOT] and then
press o.
• The menu item is set and the
previous menu is displayed.
o
o
18
IJ
ij
BACK
Page display
WB
IJ
ij
ISOAUTO
DRIVE
DIGITAL ZOOM
MENU
BACK
AF MODE
R
PANORAMA
MENU
AUTO
o
ESP
OFF
SET
ŪņŔő
SPOT
OK
SET
When there are more menu items on the next
page, press 4 on the procedure 2 screen to
move the cursor to the page display.
Press 12 to change the page.
To return to the previous page, press 3 or o.
OK
Shooting mode menuKs n
SCN
Ŕ ņ ŕ Ŗ ő
RESET
IMAGE
QUALITY
SCN
ńłŎņœł
ŎņŏŖ
1
IMAGE
IMAGE
QUALITY
RESET
RESET
EXIT
MENU
QUALITY
ńłŎņœł
ńłŎņœł
ŎņŏŖ
ŎņŏŖ
SCN
SCN
SCN
3
ŔņŕŖő
ŔņŕŖő
SET
*2
*1
2
*1
[RESET] cannot be selected when the
mode dial is set to s.
*2
s can be selected when the mode
dial is set to s.
4
OK
WB
ISO
DRIVE
ESP/n
CAMERA MENU
*3
A card is required.
g “SETUP menus” (P. 34)
• Some functions are not available according to the selected mode.
g “Functions available in shooting modes and scenes” (P. 73)
• The factory default settings are displayed in gray ().
1 IMAGE QUALITYChanging the image quality
Still picture image quality and their applications
Image quality/Image size
SHQ 3264
× 2448Low
HQ 3264 × 2448Standard
SQ1 2560 × 1920Standard
2304 × 1728
× 1536
2048
SQ2 1600
× 1200Standard
1280 × 960
1024 × 768• This is useful for sending as e-mail
640 × 480Low
Compression Application
• This is useful for printing large images
compression
on full-size paper.
• This is useful for performing computer
compression
image processing, such as contrast
adjustment and red-eye correction.
• This is useful for postcard-sized prints.
compression
• This is useful for computer editing
such as rotating or adding text to a
picture.
• This is useful for viewing pictures on a
compression
computer.
attachments.
compression
Movie image quality
Image quality/Image size
SHQ640 × 480
HQ320 × 240
SQ160 × 120
DIGITAL ZOOM
AF MODE
R
PANORAMA
*3
2
Menu operations
19
2 RESETChange the shooting functions back to default settings
NO /YES
Restore shooting functions back to default settings. The mode dial has to be set
to K (P or AUTO) in order to restore default settings.
Functions for returning the settings to the original when the reset
function is executed
2
FlashAUTOP. 12
&OFFP. 12
YYOFFP. 12
F0.0P. 13
IMAGE QUALITYHQP. 19
WBAUTOP. 21
Menu operations
ISOAUTOP. 21
DRIVEoP. 22
ESP/nESPP. 22
DIGITAL ZOOMOFFP. 22
AF MODESPOTP. 23
ROFFP. 23
FunctionFactory default setting Ref. Page
3 s (Scene)
Shooting pictures by selecting a scene according to the situation
The scene selection screen displays sample images
and the shooting mode to best suit the situation.
• By switching to the other scene, most settings will be
changed to the default settings of each scene.
20
Scene selection
IJȁPORTRAIT
B
F
D
G
U
BACK
MENU
SET
OK
Press o to decide the scene.
[e SHOOT & SELECT1] / [f SHOOT & SELECT2]
•
Press and hold the shutter button to shoot sequential pictures. After shooting
pictures, select the ones you want to erase, put the
R
to them, and press S
button to erase them.
ee
Selected picture
Press 43 to scroll through the pictures.
MENU
OK
BACKERASE
SET
S
Pictures with a
R mark are erased.
Select the pictures to be erased.
4 CAMERA MENU
WB
......................................................................... Adjusting the color of a picture
AUTOThe white balance is adjusted automatically for natural
5Sunny dayFor shooting under a clear sky.
3Cloudy dayFor shooting under a cloudy sky.
1Tungsten light For shooting under tungsten lighting.
wFluorescent
lamp 1
xFluorescent
lamp 2
yFluorescent
lamp 3
color, regardless of the light source.
For shooting under daylight fluorescent lighting. (This
type of lamp is mainly used in homes.)
For shooting under a neutral white fluorescent lamp.
(This type of lamp is mainly used in desk lamps.)
For shooting under a white fluorescent lamp. (This type
of lamp is mainly used in offices.)
2
Menu operations
ISO..............................................................................Changing the ISO sensitivity
AUTOSensitivity is automatically adjusted according to the conditions
64/100/200/
400/800/
1600/3200
• When the camera is set to [3200], the [IMAGE QUALITY] is limited to
[2048 × 1536] or less.
of the subject.
A low value lowers the sensitivity for daylight shooting of clear,
sharp pictures. The higher the value, the better the camera’s
light sensitivity and ability to shoot with a fast shutter speed and
in low light conditions. However, high sensitivity introduces noise
into the resulting picture, which may give it a grainy appearance.
oShoots 1 frame at a time when the shutter button is pressed.
iYou can take a sequence of pictures at one time while holding
The camera will take pictures in sequence until you release the shutter button.
• In high speed sequential shooting, [IMAGE QUALITY] will be limited to below
[2048 × 1536].
ESP/n ............. Changing the area for measuring the brightness of a subject
2
down the shutter button.
ESPMeters the brightness at the center of the monitor and the
surrounding area separately to create a picture with balanced
brightness. When taking pictures against strong backlight, the
center of the picture may appear dark.
nOnly the center of the monitor is metered. Suitable for taking a
picture of the subject in the center of the monitor against backlight.
Menu operations
DIGITAL ZOOM....................................................... Zooming in on your subject
OFF /ON
The digital zoom can be used to take close-up pictures with stronger
magnification than the optical zoom. (Optical zoom × Digital zoom: the maximum
15×)
Optical zoomDigital zoom
P
ʼnŒʼnŒĴijķĵ
[ ]
ȿijĵĵĹ
[
]
IN
44
White area: The optical zoom area
Red area: The digital zoom area
P
ʼnŒʼnŒĴijķĵ
[ ]
ȿijĵĵĹ
[
]
IN
44
Zoom bar
22
AF MODE .................................................................. Changing the focusing area
iESPThe camera determines which subject within the screen to focus
SPOTFocus selection is based on the subject within the AF target mark.
on. Even when the subject is not in the center of the screen,
focusing is possible.
R...................................................................... Recording sound with still pictures
OFF /ON
Recording starts about 0.5 seconds after the shutter button is released and lasts
about 4 seconds.
When recording, aim the camera microphone at the source of the sound you
want to record.
PANORAMA...........................................................Creating a panoramic picture
Panorama shooting lets you create a panoramic picture, using the OLYMPUS
Master software from the provided CD-ROM. An Olympus xD-Picture Card is
required for panorama shooting.
Connects pictures from
left to right
3: The next picture is connected at the
right edge.
4: The next picture is connected at the
left edge.
Use the arrow pad (1243) to specify at which edge you want to connect the
pictures, and then compose your shots so that the edges of the pictures overlap.
The part of the previous picture where it will be joined to the next picture does
not remain in the frame. You have to remember what the part in the frame looked
like and take the next picture so it overlaps.
Connects pictures from
bottom to top
1: The next picture is connected at the
top.
2: The next picture is connected at the
bottom.
2
Menu operations
Panorama shooting is possible for up to 10 pictures. Press o button to exit
panorama shooting.
23
Playback mode menuq
INDEX
MOVIE
EDIT
ERASE
SETUP
CALENDAR
YBAC
MENU
PRINT
ORDER
ALBUM
INDEX
SLIDESHOW
EDIT
ERASE
SETUP
CALENDAR
PLAYBACK
MENU
PRINT
ORDER
ALBUM
When a still picture is selected
*1*3
5
6
2
Menu operations
*1
EDIT
Q
P
REDEYE FIX
BLACK & WHITE
SEPIA
FRAME
TITLE
CALENDAR
LAYOUT
BRIGHTNESS
SATURATION
*1
EDIT
INDEX
EDIT
SLIDE-
SLIDE-
1
SHOW
SHOW
3
CALENDAR
CALENDAR
4
INDEX
INDEX
MENU
EXIT
When the move is selected
MOVIE
MOVIE
2
PLPLAY
PLAY
PLPLAYBAC
CALENDAR
CALENDAR
INDEX
INDEX
MENU
EXIT
PLAYBACK
3
4
EDIT
EDIT
PLAYBACK
PLAYBACK
MENU
MENU
ERASE
ERASE
8
5
EDIT
EDIT
MENU
MENU
ERASE
ERASE
8
7
K
PRINT
PRINT
ORDER
ORDER
SETUP
SETUP
ALBUM
ALBUM
SET
97
PRINT
PRINT
ORDER
ORDER
SETUP
SETUP
-
ALBUM
ALBUM
SET
9
P
OK
*1
0
y
R
ALBUM ENTRY
*1A picture card is
required.
*2This is not
displayed when a
movie is selected.
OK
*1
*3This is not
selected when the
movie is selected.
g “SETUP menus” (P. 34)
• The factory default settings are displayed in gray ().
1 SLIDESHOWPlaying back pictures automatically
SLIDESHOW
BGM
TYPE
OFF
ON
•Set [BGM] to [ON] or [OFF].
[IN]
•Select the transition effect between pictures from
[TYPE].
PLAYBACK
MENU
*2
*2
*1
24
BACK
MENU
SET
OK
BGM
TYPENORMAL
ON / OFF
SCROLL
FADER
SLIDE
ZOOM DOWN
ZOOM UP
CHECKERBOARD
BLINDS
SWIVEL
RANDOM
• Only the first frame of each movie is displayed.
IJijĻ Ĵı
Ĩı ķį ı Ĵį ijķ
IJı ı Į ı ı ı ĵ
IN
IJijĻ Ĵı
Ĩı ķį ı Ĵį ijķ
IJıı Į ı ı ı ĵ
ııĻıı
ııĻĴķ
IN
ııĻıĶ
ııĻĴķ
IN
• After setting [BGM] and [TYPE], press o to start the slideshow.
•Press o or m button to cancel the slideshow.
2 MOVIE PLAYPlaying back movies
Select [MOVIE PLAY] from the top menu, and press o to play back the movie.
Another option is to select a picture with the movie icon (n), and press o to
play back the movie.
[
]
IN
2
Menu operations
ĨıķįıĴįijķ
MOVIE PLAY
OK
IJijĻĴı
IJııĮıııĵ
ĵ
Operations during movie playback
[
]
IN
Playing time/Total recording time
IJııĮıııĵ
ııĻıı
ȟııĻĴķ
IJijĻĴı
1 : Increases the volume.
2 : Reduces the volume.
ĨıķįıĴįijķ
3 : Each time you press the button, the playback speed changes
in the following order: 2×; 20×; and back to 1×.
4 : Plays the movie in reverse. Each time you press the button, the
playback speed changes in the following order: 2×; 20×; and
back to 1×.
•Press o to pause the playback.
Operations during pause
[
]
IN
ııĻıĶ
ȟııĻĴķ
3 : Displays the next frame.
4 : Displays the previous frame.
• To resume the movie, press o.
1 : Displays the first frame.
2 : Displays the last frame.
• To cancel the playback of the movie in the middle of it or during pause, press
the m button.
25
3 CALENDARPlaying back the pictures in a calendar format
This function lets you play back the pictures in a calendar format by the date of
recording.
g “Zoom button Zooming while shooting/close-up playback” (P. 11)
4 INDEXViewing the pictures as a thumbnail
This function lets you view the pictures in 9 frames at the same time.
g “Zoom button Zooming while shooting/close-up playback” (P. 11)
2
5 EDIT
This function lets you edit still pictures saved on a card and store them as new
pictures.
Q
............................................................................ Changing the size of pictures
Menu operations
640 × 480/320 × 240
This changes the image size of a picture and saves it as a new file.
P ................................................................................................Cropping a picture
Crop a picture, and save the cropped picture as a new picture.
•Use 43 to select a picture to be cropped and press o.
• Press the arrow pad (1243) or zoom button, adjust
the position and size of the area-selection box and press
o.
O
SET
OK
REDEYE FIX...........................................................Fixing the red-eye in pictures
This function corrects the red-eye look that often occurs when taking pictures
with a flash.
BLACK & WHITE....................................Changing pictures to black and white
This changes the picture to black and white and saves it as a new file.
SEPIA ...............................................................Changing pictures to a sepia tone
This changes the picture to sepia and saves it as a new file.
26
FRAME........................................................Synthesize the frame and the picture
ŜŹŅŞ
This function lets you select the frame, and synthesize the frame and the picture,
and store it as a new picture.
FRAME
• Select a frame with 43 and press o .
ŜŹŅŞ
• Select the picture to be synthesized with the frame with
43, and press o. (Press 12 to turn the picture 90
degrees clockwise or 90 degrees counterclockwise.)
• Press the arrow pad (1243) and the zoom button to
ŘOŕ
OK
SETMOVE
adjust the position and size of the picture, and press o.
TITLE ..............................................................Synthesize the title and the picture
This function lets you select the title, synthesize the title and the picture, and store
it as a new picture.
TITLE
• Select the picture with 43, and press o.
• Select the title with 43, and press o. (Press 12 to
turn the title 90 degrees clockwise or 90 degrees
counterclockwise.)
• Press the arrow pad (1243) and the zoom button to
OK
SET
adjust the position and size of the picture, and press o.
• Set the color of the title with the arrow pad (1243),
and press o.
CALENDAR ...................................... Synthesize the calendar using the picture
This function lets you select the calendar, synthesize the calendar and the
picture, and store it as a new picture.
CALENDARŜŹŅŞ
• Select the picture with 43, and press o.
• Select the calendar with 43, and press o. (Press 12
to turn the picture 90 degrees clockwise or 90 degrees
counterclockwise.)
• Set the date of the calendar, and press o.
OK
SET
2
Menu operations
LAYOUT........................................ Making a layout of several recorded pictures
ALL IMAGESLayout of the all pictures stored in the card will be made.
ALBUMThe picture you want to make layout is selected from the album.
CALENDAR
SEL. IMAGE
LAYOUT
ALL IMAGES
ALBUM
CALENDAR
SEL. IMAGE
MENU
BACK
A monthly calendar appears and the pictures you want to make
layout are selected by the date.
Pictures that you want to make layout are specified one by one.
•Use 43 to select a layout pattern and press o.
• Select the picture type you want to make layout and press
o.
• Select the picture and press o. (When [SEL. IMAGE] is
selected, press 12 to turn the picture 90 degrees
OK
SET
clockwise or 90 degrees counterclockwise.)
27
Loading...
+ 61 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.