Olympus FR-WR User Manual

FR‑WR Flash Receiver

• Charging completion
indication

• Quick configuration via dials • Wireless Receiver to control

• Enables versatile wireless
flash photography

• Dust, splash & freezeproof

multiple flash units remotely
from the camera

Receiver to control multiple flashes

The FR‑WR sync terminal can be used to connect commercial flash units, such as a monoblock flash, which can then be remotely
fired. As is the case with the FL‑700WR flash, a dust‑, splash‑, and freezeproof (‑10°C) construction allows use in a variety of
fields. With the FR‑WR charging completion indication emits an an electronic sound, when flash charging is completed. Groups and
channels can easily be set and checked with dials on the FR‑WR.

Specifications

Wireless Flash Control

Modes RCV (commander flash

control)

X-RCV (connected flash

control)

Maximum range 30m / 98.4'' *

Number of channels 15 channels

3groups

Frequency band 2.4GHz

* Measurements obtained

from in‑house tests at

Olympus, using new or fully

charged batteries. Actual

figures may vary depending

on shooting conditions.

Connections

External terminal Sync terminal (output)

Power Supply

Power source 2 AAA batteries

Battery (Alkaline or Ni‑MH)

Battery life 6.4h (using alkaline batteries)

*

Charging completion indication Beeping sound

* Measurements obtained

from in‑house tests at

Olympus, using new or fully

charged batteries. Actual

figures may vary depending

on shooting conditions.

Dimensions

Width 59.1mm

Height 46.1mm

Depth 51.0mm

Weight 75g (excluding batteries)

Environment

Humidity 30 ‑ 90% operation humidity /

10 ‑ 90% storage humidity

Temperature ‑10 ‑ 40°C Operating

temperature / ‑20 ‑ 60°C

storage temperature

Tough Features Dust, splash and freezeproof

Specifications and appearances are subject to change without any notice or obligation on the part of the manufacturer