Olympus CAMEDIA D-630 ZOOM Basic Manual

DIGITAL CAMERA

D-630 ZOOM FE-5500 X-600

Shoot and Play!

ENGLISH

• Thank you for purchasing an Olympus digital camera. Before you start to use your new camera, please read these instructions carefully to enjoy optimum performance and a longer service life.

• This manual explains shooting and playback basics. For details on functions, read the advanced manual. Keep this manual in a safe place for future reference.

• We recommend that you take test shots to get accustomed to your camera before taking important photographs.

• The screen and camera illustrations shown in this manual were produced during the development stages and may differ from the actual product.

For customers in North and South America

For customers in USA

Declaration of Conformity Model Number : D-630 ZOOM/FE-5500/X-600 Trade Name : OLYMPUS Responsible Party :

Address : Two Corporate Center Drive, P.O. Box 9058, Melville, NY

Telephone Number : 1-631-844-5000

Tested To Comply With FCC Standards FOR HOME OR OFFICE USE

This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received, including interference that may

cause undesired operation.

For customers in Canada

This Class B digital apparatus meets all requirements of the Canadian InterferenceCausing Equipment Regulations.

11747-9058 U.S.A.

For customers in Europe

“CE” mark indicates that this product complies with the European requirements for safety, health, environment and customer protection. “CE” mark cameras are intended for sales in Europe.

This symbol [crossed-out wheeled bin WEEE Annex IV] indicates separate collection of waste electrical and electronic equipment in the EU countries. Please do not throw the equipment into the domestic refuse. Please use the return and collection systems available in your country for the disposal of this product. This product and bundled accessories conform to WEEE standards.

Trademarks

• IBM is a registered trademark of International Business Machines Corporation.

• Microsoft and Windows are registered trademarks of Microsoft Corporation.

• Macintosh is a trademark of Apple Computer Inc.

• xD-Picture Card™ is a trademark.

• All other company and product names are registered trademarks and/or trademarks of their respective owners.

• The standards for camera file systems referred to in this manual are the “Design Rule for Camera File System/DCF” standards stipulated by the Japan Electronics and Information Technology Industries Association (JEITA).

Manual Contents

Safety Precautions....................................................... 4

UNPACKING THE BOX CONTENTS

CHARGING THE BATTERY ............................. 12

LOADING THE BATTERY ............................... 13

TURNING THE CAMERA ON ........................... 15

TAKING A PICTURE...................................... 17

REVIEWING A PICTURE ................................ 19

TURNING THE CAMERA OFF ..........................20

Enjoy the camera more.............................................. 21

Things you can do with this camera

Installing OLYMPUS Master Software

...................10

Specifications............................................................. 23

Safety Precautions

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF ELECTRICAL SHOCK, DO NOT

REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE.

REFER SERVICING TO QUALIFIED OLYMPUS SERVICE PERSONNEL.

Lightning flash with an arrowhead, enclosed in a tria ngle, alerts you to the presence of uninsulated voltage points inside the product which could cause a s erious electrical shock.

An exclamation mark enclosed in a triangle alerts you to important operating and maintenance instructions in the documentation provided with the product.

WARNING! TO AVOID THE RISK OF FIRE OR ELECTRICAL SHOCK, NEVER EXPOSE THIS PRODUCT TO WATER OR

OPERATE IN A HIGH HUMIDITY ENVIRONMENT.

General Precautions

Read All Instructions — Before you use the product, read all operating

instructions.

Save These Instructions — Save all safety and operating instructions for future

reference.

Heed Warnings — Read carefully and follow all warning labels on the product and

those described in the instructions.

Follow Instructions — Follow all instructions provided with this product. Cleaning — Always unplug this product from the wall outlet before cleaning. Use

only a damp cloth for cleaning. Never use any type of liquid or aerosol cleaner, or any type of organic solvent to clean this product.

Attachments — For your safety, and to avoid damaging the product, use only

accessories recommended by Olympus.

Water and Moisture — Never use this product around water (near a bathtub,

kitchen sink, laundry tub, wet basement, swimming pool or in the rain). For precautions on products with weatherproof designs, read the weatherproofing sections of their manuals.

Location — To avoid damage to the product and prevent personal injury, never

place this product on an unstable stand, tripod, bracket, table or cart. Mount only on a stable tripod, stand, or bracket. Follow the instructions that describe how to safely mount the product, and use only the mounting devices recommended by the manufacturer.

Safety Precautions

Power Sources — Connect this product only to the power source described on

the product label. If you are not sure about the type of power supply in your home, consult your local power company. Refer to your operating instructions for information on using the product with a battery.

Grounding, Polarization — If this product can be used with a specified AC

adapter, the adapter may be equipped with a polarized alternating current line plug (a plug with one blade wider than the other). This safety feature allows the plug to fit into the power outlet only one way. If you cannot insert the plug into the wall outlet, pull it out, reverse it, and then reinsert it. If the plug still fails to fit, contact an electrician and have the receptacle replaced.

Protecting the Power Cord — The power supply cord should be placed so it will

not be walked on. Never put a heavy object on the power cord or wrap it around the leg of a table or chair. Keep the area around the power cord connection points, at the power outlet, and at the product connection, free of all AC adapter or accessory power cords.

Lightning — If a lightning storm occurs while using a specified AC adapter,

remove it from the wall outlet immediately. To avoid damage from unexpected power surges, always unplug the AC adapter from the power outlet and disconnect it from the camera when the camera is not in use.

Overloading — Never overload wall outlets, extension cords, power strips, or

other power connection points with too many plugs.

Foreign Objects, Liquid Spillage — To avoid personal injury caused by fire or

electrical shock from contact with internal high voltage points, never insert a metal object into the product. Avoid using the product where there is a danger of spillage.

Heat — Never use or store this product near any heat source such as a radiator,

heat register, stove, or any type of equipment or appliance that generates heat, including stereo amplifiers.

Servicing — Refer all servicing to qualified personnel. Attempting to remove the

covers or disassemble the product, could expose you to dangerous high voltage points.

Damage Requiring Service — If you notice any of the conditions described below

while using a specified AC adapter, unplug it from the wall outlet and refer servicing to qualified service personnel: a) Liquid has been spilled onto the product or some other object has fallen into

the product. b) The product has been exposed to water. c) The product does not operate normally despite following operating

instructions. Adjust only the controls described in the operating instructions

as improper adjustment of other controls could damage the product and

require extensive repair work by a qualified technician. d) The product has been dropped or damaged in any way. e) The product exhibits a distinct change in performance.

Safety Precautions

Replacement Parts — When replacement parts are required, make sure that the

service center uses only parts with the same characteristics as the originals, as recommended by the manufacturer. Unauthorized substitution of parts could result in fire, electrical shock, or create other hazards.

Safety Check — Upon completion of servicing or repairs, ask the service

technician to perform safety checks to determine that the product is in good working order.

If the product is used without observing the information given under this symbol, serious injury or death may result.

If the product is used without observing the information given under this symbol, injury or death may result.

If the product is used without observing the information given under this symbol, minor personal injury, damage to the equipment, or the loss of valuable data may result.

DANGER

WARNING

CAUTION

Handling the Camera

WARNING

( Do not use the camera near flammable or explosive gases.

• To avoid causing a fire or explosion, never use the camera near flammable or explosive gases.

( Do not use the flash on people (infants, small children, etc.) at

close range.

• Use caution when taking flash pictures at close range. When you fire the flash, you must be at least 1 m (3 ft.) away from the faces of your subjects, especially when taking pictures of infants and small children. Firing the flash too close to the subject’s eyes could cause a momentary loss of vision.

( Keep young children and infants away from the camera.

• Always use and store the camera out of the reach of young children and infants to prevent the following dangerous situations which could cause serious injury:

• Becoming entangled in the camera strap, causing strangulation.

• Accidentally swallowing the battery, cards or other small parts.

• Accidentally firing the flash into their own eyes or those of another child.

• Accidentally being injured by the moving parts of the camera.

( Do not look at the sun or strong lights with the camera.

• To avoid damaging your eyes, never aim the camera directly into the sun, or any other extremely bright light source.

Safety Precautions

( Do not touch charging battery (included in some areas) or the

battery charger until charging is finished and the battery has cooled.

• The battery and battery charger become hot while charging. A specified AC adapter also becomes hot during long use. At these times, they may cause minor burns.

( Do not use or store the camera in dusty or humid places.

• Using or storing the camera in dusty or humid places may result in a fire or electric shock.

( Do not cover the flash with a hand while firing.

• Do not cover the flash with a hand while firing or touch it after it has just been fired. It may be hot and cause minor burns. Avoid using the flash for extended periods.

( Do not take apart or modify the camera.

• Never attempt to disassemble the camera. The internal circuits contain high voltage points which could cause serious burns or electrical shock.

( Do not let water or foreign objects inside the camera.

• If the camera is accidentally dropped in water, or if liquid is spilled into the camera, stop using it, allow it to dry, and then remove the battery. Contact the nearest authorized Olympus service center.

CAUTION

( Stop using the camera immediately if you notice any unusual

odors, noise, or smoke around it.

• If you notice any unusual odors, noise, or smoke around the camera during operation, switch it off immediately – and disconnect a specified AC adapter (if attached). Allow the camera to sit idle for a few minutes to cool. Take the camera outdoors, away from flammable objects, and carefully remove the battery. Never remove the battery with bare hands, which may cause a fire or burn your hands. Contact the nearest Olympus service center immediately.

( Do not use the camera with wet hands.

• To avoid dangerous electrical shock, never hold or operate the camera with wet hands.

( Do not leave the camera in places where it may be subject to

extremely high temperatures.

• Doing so may cause parts to deteriorate and, in some circumstances, cause the camera to catch fire. Do not use the charger or AC adapter if it is covered (such as a blanket). This could cause overheating, resulting in fire.

Safety Precautions

( Handle the camera with care to avoid getting a low-temperature

burn.

• When the camera contains metal parts, overheating can result in a lowtemperature burn. Pay attention to the following:

• When used for a long period, the camera will get hot. If you hold on to the

camera in this state, a low-temperature burn may be caused.

• In places subject to extremely cold temperatures, the temperature of the

camera’s body may be lower than the environmental temperature. If possible, wear gloves when handling the camera in cold temperatures.

( Be careful with the strap.

• Be careful with the strap when you carry the camera. It could easily catch on stray objects – and cause serious damage.

( Use only the AC adapter specified by Olympus.

• Never use any AC adapter except one specified by Olympus. Using a

different AC adapter may damage the camera or power source, or result in accidents or fire. Ensure the adapter used is designed for your region or country. For more information, contact the nearest Olympus service center or the store of purchase. Olympus makes no representations or warranties regarding any damages caused by AC adapters not recommended by Olympus.

( Do not damage the power-supply cord.

• Never pull or modify the power-supply cord of the AC adapter or accessories. Make sure only the plug is securely held during insertion and removal from the outlet. Stop using the camera immediately, and contact the nearest Olympus service center or the store of purchase if:

• The power-supply cord becomes hot, or it gives off smoke or unusual

odors.

• The power-supply cord is cut or damaged, or the plug has a faulty

contact.

Battery handling precautions

Follow these important guidelines to prevent battery from leaking, overheating, burning, exploding, or causing electrical shocks or burns.

DANGER

• This camera uses a lithium ion battery specified by Olympus. Charge batteries with the specified charger. Do not use any other chargers.

• Never heat or incinerate the battery.

• Take precautions when carrying or storing battery to prevent the battery from coming into contact with any metal objects such as jewelry, pins, fasteners, etc.

• Never store the battery where the battery will be exposed to direct sunlight, or subjected to high temperatures in a hot vehicle, near a heat source, etc.

Safety Precautions

• To prevent causing battery leaks or damaging their terminals, carefully follow all

instructions regarding the use of battery. Never attempt to disassemble a battery or modify it in any way, by soldering, etc.

• If battery fluid gets into your eyes, flush your eyes immediately with clear, cold

running water and seek medical attention immediately.

• Always store battery out of the reach of small children. If a child accidentally

swallows a battery, seek medical attention immediately.

WARNING

• Keep battery dry at all times. Never allow them to come into contact with fresh

or salt water.

• Do not touch or hold the battery with wet hands.

• To prevent the battery from leaking, overheating, or causing a fire or explosion,

use only the battery recommended for use with this product.

• Insert the battery carefully as described in the operating instructions. Never load

the battery with its +/- terminals reversed. Never force the battery into the battery compartment.

• If the battery is not charged within the specified time, stop charging it and do not

use it.

• Do not use a battery if it is cracked or broken.

• If a battery leaks, becomes discolored or deformed, or becomes abnormal in

any other way during operation, stop using the camera and consult your dealer or an authorized Olympus service center. Continued use may result in fire or electric shock.

• If a battery leaks fluid onto your clothing or skin, remove the clothing and flush

the affected area with clean, running cold water immediately. If the fluid burns your skin, seek medical attention immediately.

• Never attempt to modify the battery compartment on the camera, never insert

anything (other than the recommended battery) into the battery compartment.

• Never subject battery to strong shocks or continuous vibration.

CAUTION

• Before loading, always inspect the battery carefully for leaks, discoloration,

warping, or any other abnormality.

• The battery may become hot during prolonged use. To avoid minor burns, do not

remove it immediately after using the camera.

• Remove the battery from the camera if it is not going to be used for a long time.

UNPACKING THE BOX CONTENTS

If you find any contents missing or damaged, contact the place of purchase.

Digital Camera Strap

Lithium ion Battery

Charger (LI-40C)

OLYMPUS Master

CD-ROM

USB Cable AV Cable

Basic Manual

(this manual)

Lithium ion Battery

(LI-40B)

Advanced Manual

(CD-ROM)

Warranty Card Registration Card

Contents vary depending on the area where you purchased this camera.

UNPACKING THE BOX CONTENTS

Attaching the strap

Attach the strap as shown.

Strap

Pull the strap tight so that it does not come loose.

Note

Be careful with the strap when you carry the camera, as it can easily catch on

stray objects, causing injury or damage.

Attach the strap correctly as shown above. Olympus is not responsible for any

damages resulting from the strap coming loose due to incorrect attachment.

CHARGING THE BATTERY

The battery is not fully charged at the time of purchase. Charge the battery fully with the LI-40C charger before use.

Insert the battery into the charger.

S mark

Lithium ion Battery (LI-40B)

Lithium ion Battery Charger (LI-40C)

Connect the power cable.

Power cable

Charging indicator

AC wall outlet

When charging starts, the indicator lights red. When fully charged, the indicator turns off.

TIPS

The LI-40B battery takes approximately 210 minutes to charge.

Note

This camera uses an Olympus LI-40B lithium ion battery. No other type of

battery can be used.

Use only the specified charger. Battery life varies depending on shooting conditions, etc. The charger can be used within the range of AC100V to AC240V (50/60Hz).

When using the charger abroad, you may need a plug adapter to convert the plug to the shape of the AC wall outlet. For details, ask at your local electrical shop or travel agent.

Do not use voltage converters sold in stores traveling overseas as this could

damage your charger.

LOADING THE BATTERY

Make sure the camera is turned off.

The lens is retracted.

The monitor is off.

The lamp is off.

Battery compartment/card cover

Open the battery compartment/card cover.

Slide

Insert the battery.

Battery lock knob

Lift

To remove the battery

Slide the lock knob as shown. The battery pops up allowing you to grasp it.

Battery compartment/ card cover

The battery is locked into place

when inserted correctly.

Battery lock knob

LOADING THE BATTERY

Close the battery compartment/card cover.

Press down on the center of the cover when sliding.

Note

Be careful to catch finger in the battery compartment/card cover.

The battery

Note

Power consumption by the camera varies depending on which functions are

used.

Power is consumed continuously during the conditions described below

causing battery to become exhausted quickly.

The zoom is used repeatedly. The shutter button is pressed halfway repeatedly in shooting mode,

The camera is played back still pictures or movies for a long time. The camera is connected to a computer or printer.

If you use an exhausted battery, the camera may turn off without displaying

the battery level warning.

Slide

activating the auto focus.

TURNING THE CAMERA ON

Press the POWER switch.

POWER switch

Battery check indicator

Shooting mode

The lens extends. The monitor turns on. The lamp on the camera lights orange.

Number of storable still picture

Note

To save battery power, the camera automatically enters sleep mode and

stops operating after about 3 minutes of non-operation. The camera activates again as soon as you operate the shutter button or zoom button.

15 minutes after the camera enters sleep mode, the camera turns off

automatically. Turn the camera on to use.

Lamp

TURNING THE CAMERA ON

When you first turn on the camera

Setting the date and time

The first time you use the camera, [Y/M/D] is displayed prompting you to set the date and time. See “Setting the date and time” in Chapter 6 of the Advanced Manual. The camera can be operated without making this setting.

Languages available on the camera

Available languages may vary according to where you purchased the camera. The instructions given in this manual and the

Advanced Manual apply to the camera screens in English. See “Changing the display language” in Chapter 6 of the Advanced Manual.

Battery check indicator

The battery check indicator is displayed for 3 seconds when the camera is turned on. And the indicator changes according to how much power is remaining especially when the battery power is low.

Lit (green)

(Disappears after a

while.)

Ready to shoot. No power is left. Charge the

Blinking (red)

The battery needs charging soon.

[BATTERY EMPTY]

is displayed.

battery. (When no battery power is left, the lamp of the camera blinks alternately green and orange.)

TAKING A PICTURE

Compose your picture.

AF target mark

Focus on your subject.

Shutter button

Lamp

Position the AF target mark on your

subject using the monitor.

[IN]: Indicates that pictures are recorded

in the camera’s internal memory.

Press the shutter button halfway and

hold.

Green lamp

# mark

The green lamp lights when the

focus and exposure are locked. (focus lock)

The # mark lights when the flash is

about to fire.

TAKING A PICTURE

Take the picture.

Press the shutter button fully.

The camera takes the picture. The

lamp on the camera blinks orange while the picture is recorded.

Note

Press the shutter button gently. If it is pressed forcefully, the camera may

move causing the picture to blur.

Recorded pictures are saved in the camera regardless of whether the camera

is turned off or the battery is replaced or removed.

Never open the battery compartment/card cover, remove the battery or

disconnect the AC adapter while the lamp on the camera is blinking orange. Doing so could destroy stored pictures and prevent storage of pictures you have just taken.

When taking pictures against strong backlight, the area of the picture in

shadow may appear colored.

REVIEWING A PICTURE

Press $.

Playback button

Lamp

Use the arrow pad to display the picture you want.

10 pictures back

10 pictures forward

Shooting button (#)

The lamp on the camera lights green

and playback mode is enabled. Last picture taken is displayed.

Press # when you are ready to take

another picture.

Next picturePrevious picture

TURNING THE CAMERA OFF

Press the POWER switch.

POWER switch

The monitor and the lamp

on the camera turn off.

The lens retracts.

Now that you have mastered how to shoot and play, refer to the Advanced Manual for additional camera features and applications. And to get the most out of your digital images, be sure to install the OLYMPUS Master software on the supplied CD-ROM for enhanced editing, storing, and sharing of your images.

Enjoy the camera more

Things you can do with this camera

Using the internal memory or card...

Pictures taken with this camera are stored in the internal memory or on an xD-Picture Card. An xD-Picture Card lets you store many more pictures than the memory. By storing the relevant print reservation data with the images on the card, you can print pictures at a photo store or on a PictBridge-compatible printer.

Using a printer...

With a PictBridge-compatible printer, you can print pictures directly from your camera.

Using the arrow pad and

button...

The arrow pad and Z button are for selecting and setting menu options as well as viewing pictures frame by frame.

Using the direct buttons...

Direct buttons let you perform functions such as switching between shooting mode and playback mode, erasing pictures, setting the flash mode, making camera operation easy. In SCENE mode, the mode lets you select th optimum settings for the shooting conditions.

Enjoy the camera more

Installing OLYMPUS Master Software

The supplied CD-ROM contains OLYMPUS Master software for installing and managing image files. Install it on your computer to enjoy the pictures you have taken. For details, refer to the online help after installing the OLYMPUS Master software.

Download images from the camera or other media

Make panoramic images

You can make panoramic images using pictures taken in panorama mode.

View images and movies

You can enjoy slideshows and play back movies.

Manage images

You can organize your images using the calendar display. Search the image you want by date or keyword.

Edit images

You can rotate images, trim them and change the size.

Print images

You can print images and make indexes, calendars and postcards.

User Registration

After installing the OLYMPUS Master software, we recommend that you fill out the user registration for your camera. By making your registration, you will receive information on software and firmware updates from Olympus.

Specifications

Camera

Product type : Digital camera (for shooting and displaying) Recording system

Still picture : Digital recording, JPEG (in accordance with Design rule

Applicable standards

Movie : QuickTime Motion JPEG support

Memory : Internal memory (14 MB)

Image size : 2,560 × 1,920 pixels (SHQ)

No. of storable pictures (when using the

internal memory)

No. of effective pixels : Approx. 5,000,000 pixels Image pickup device : 1/2.5" CCD solid-state image pickup, 5,360,000 pixels

Lens : Olympus lens 5.8 to 17.4 mm, f2.8 to 4.8

Photometric system : Center-weighted metering system, spot metering system Shutter speed : 2 to 1/2,000 sec. Shooting range :

Monitor : 2.0" TFT color LCD display, 115,000 pixels Auto focus : Contrast Detection System Outer connector : DC-IN jack, USB connector (Multi-connector),

Automatic calendar system Operating environment

Temperature : 0°C to 40°C (32°F to 104°F) (operation)/

Humidity : 30% to 90% (operation)/10% to 90% (storage)

Power supply : Only an Olympus LI-40B lithium ion battery

Dimensions : 91 mm (W) × 60.5 mm (H) × 24 mm (D) (3.6" × 2.4" × 1")

Weight : 125 g (0.27 lb.) without battery and card

for Camera File system (DCF))

: Exif 2.2, Digital Print Order Format (DPOF), PRINT Image

Matching III, PictBridge

xD-Picture Card (16 MB - 1 GB)

2,560 × 1,920 pixels (HQ) 1,600 × 1,200 pixels (SQ1) 640 × 480 pixels (SQ2)

: Approx. 3 frames (SHQ)

Approx. 11 frames (HQ) Approx. 21 frames (SQ1) Approx. 78 frames (SQ2)

(gross)

(equivalent to 35 to 105 mm on a 35 mm camera)

0.6 m (2.0 ft.) to ) (normal)

0.1 m (0.4 ft.) to 0.6 m (2.0 ft.) (macro mode)

A/V OUT jack (Multi-connector)

: 2005 up to 2099

-20°C to 60°C (-4°F to 140°F) (storage)

AC adapter specified by Olympus (optional)

excluding protrusions

Specifications

Lithium ion Battery (LI-40B)

Type : Lithium ion rechargeable battery Standard voltage : DC 3.7V Standard capacity : 660 mAh Battery life : Approx. 300 full recharges (varies on usage) Recommended

temperature

Dimensions : 31.5 × 39.5 × 6 mm (1.2" × 1.5" × 0.2") Weight : Approx. 15 g/0.5 oz.

Lithium ion Battery Charger (LI-40C)

Power requirements : AC 100 to 240V (50 to 60 Hz)

Output : DC 4.2V 200 mA Charging time : Approx. 210 minutes

Recommended temperature

Dimensions : 62 × 23 × 90 mm (2.4" × 0.8" × 3.5") Weight : Approx. 65 g/2.3 oz. (The power cable is not included.)

Design and specifications subject to change without notice.

: 0°C to 40°C/32°F to 104°F (charging)

0°C to 60°C/32°F to 140°F (operation)

-20°C to 35°C/-4°F to 95°F (storage)

3.2 VA (100V) to 5.5 VA (240V)

(The battery charging time may vary depending on the battery temperature.)

: 0°C to 40°C/32°F to 104°F (operation)

-20°C to 60°C/-4°F to 140°F (storage)

MEMO

• 저희 올림푸스 디지털 카메라를 구입해 주신데 대해 감사드립니다. 카메라를 사용하 시기 전에 본 설명서를 잘 읽으시고 최적의 기능을 즐기면서 제품을 오랫동안 사용하 시기 바랍니다.

• 본 설명서는 촬영과 재생의 기본에 관해서 설명합니다. 기능에 관한 상세한 내용은, 고 급편을 참조하십시오. 본 설명서를 안전한 곳에 보관하시고 계속해서 사용하시기 바 랍니다.

• 중요한 사진을 촬영하기 전 테스트 촬영을 권장합니다.

• 계속적인 제품 향상을 위하여 올림푸스는 본 취급 설명서에 들어있는 정보를 수정하 거나 갱신하는 권리를 가지고 있습니다.

사용자 안내문

이 기기는 가정용으로 전자파 적합등록을 한 기기로서

주거지역에서는 물론 모든 지역에서 사용할 수 있습니다.

인증내역

1.기기명칭(모델명):DIGITAL STILL CAMERA

(D-630 ZOOM/FE-5500/X-600)

2.인증받은자의 상호:올림푸스한국(주)

3.제조자:

등록 상표

•IBM은 International Business Machines Corporation의 등록 상표입니다.

•Microsoft 및 Windows는 Microsoft Corporation의 등록 상표입니다.

•Macintosh는 Apple Computer Inc. 의 상표입니다.

• xD-Picture Card™는 상표입니다.

• 그 외의 모든 상호 및 제품명은 관련 소유자의 등록 상표 및/또는 상표입니다.

• 이 설명서에서 언급된 카메라 파일 시스템용 표준은 일본 전자정보기술산업협

회 (JEITA) 가 규정한 “DCF(Design Rule for Camera File System; 카메라 파일 시스템용 디자인 규격)” 표준입니다.

사용 설명서 목차

안전 주의 사항.............................................................. 28

상자 내용물 꺼내기

배터리 충전 ................................................. 36

배터리 넣기 ................................................. 37

카메라 켜기 ................................................. 39

사진 촬영....................................................41

사진 확인....................................................43

카메라 끄기 ................................................. 44

카메라 더 활용하기 ...................................................... 45

이 카메라로 할 수 있는 것

OLYMPUS Master 소프트웨어 설치

........................................34

제품 사양...................................................................... 47

안전 주의 사항

주의

감전 위험이 있습니다.

열지 마십시오.

주의: 감전 위험을 줄이려면 커버(또는 뒷면)를 제거하지 마십시오.

사용자가 수리할 수 있는 부분이 아닙니다.

공인된 OLYMPUS 서비스 담당자에게 문의하십시오.

삼각형 내의 화살촉을 가진 번쩍이는 번개 모양은 제품 내부에 절연되지 않은 전압점이 있어 심각한 감전을 유발할 수 있으므로 주의를 요하는 부분입니다.

삼각형 내의 느낌표는 제품과 함께 제공된 설명서에서 설명하고 있는 중요한 작동 및 유지관리 지침에 대한 주의를 요하는 부분입니다.

경고! 본 제품을 물에서 젖게 하거나 다습한 환경에서 작동시키지 마십시오. 화재 또는 감전이 발생할 수 있습니다.

일반적인 주의 사항

모든 지침을 읽으십시오 — 제품을 사용하기 전에 모든 작동 지침을 읽으십시오.

이 지침들을 보관하십시오 — 나중에 참고할 수 있도록 모든 안전 및 작동 상의 지

침들을 보관하십시오.

경고에 주의하십시오 — 제품에 붙어 있는 경고 라벨 및 지침에 기술되어 있는 경

고를 모두 주의 깊게 읽고 따르십시오.

지침을 따르십시오 — 제품에 제공되는 모든 지침들을 따르십시오. 청소 — 청소를 하기 전에 항상 콘센트에서 제품의 플러그를 빼십시오. 청소할 때

는 축축한 천만 사용하십시오. 제품을 청소할 때는 용액, 분무식 클리너 또는 모 든 형태의 유기 용제를 절대 사용하지 마십시오.

부속물 — 고객의 안전과 제품 손상 방지를 위해 Olympus에서 권장하는 액세서리

만 사용하십시오.

물과 습기 — 이 제품은 물 근처(욕조, 부엌 싱크대, 세탁용 물통, 습기가 많은 지하

실, 수영장 등의 근처 또는 빗 속)에서 절대 사용하지 마십시오. 방수 설계된 제 품들의 주의 사항에 대해선 관련 사용 설명서의 방수 부분을 읽어 보시기 바랍 니다.

위치 선정 — 제품 손상을 예방하고 상해를 막기 위해 제품을 불안정한 스탠드, 삼

각대, 선반, 탁자 또는 짐수레에 절대로 올려 놓지 마십시오. 안정된 삼각대, 스 탠드 또는 선반 위에만 올려 놓으십시오. 제품을 안전하게 설치하는 방법을 설 명하는 지침을 준수하고 제조업체가 권장하는 설치 장비만 사용하십시오.

안전 주의 사항

전원 — 이 제품은 제품 라벨에 기술되어 있는 전원에만 연결하십시오. 집에서 사

용하는 전원의 종류를 잘 모를 경우 지역 전력 회사에 문의하십시오. 배터리를 이용한 제품 사용 방법에 대한 정보는 작동 지침들을 참조하십시오.

접지, 양극화 — 이 제품을 지정된 AC 어댑터와 함께 사용할 수 있다면 해당 어댑

터에는 양극화 되어 있는 교류 라인 플러그(한 쪽 날이 다른 쪽 날에 비해 넓은 플러그)가 장착되어 있을 것입니다. 이 안전 기능은 플러그가 콘센트에 한쪽 방 향으로만 끼워지도록 합니다. 콘센트에 플러그가 끼워지지 않으면 플러그를 뺀 뒤 뒤집은 다음 다시 끼우십시오. 그래도 플러그가 끼워지지 않으면 전기 기사 를 불러 소켓을 교체하십시오.

전원 코드 보호 — 전원 코드는 밟히지 않는 곳에 배치해야 합니다. 전원 코드에 절

대 무거운 물체를 올려 놓거나 탁자나 의자 다리에 전원 코드를 감아 두지 마십 시오. 전원 콘센트 및 제품의 전원 코드 연결 지점 주변의 AC 어댑터나 액세서리 전원 코드는 모두 치우십시오.

번개 — 지정된 AC 어댑터를 사용하는 동안 번개를 동반한 폭풍이 몰아치는 경우

에는 어댑터를 콘센트에서 즉시 분리하십시오. 예기치 않은 전압 증가로 인한 손 상을 피하기 위해 항상 AC 어댑터를 전원 콘센트에서 뽑아 두고 카메라를 사용 하고 있지 않을 때는 카메라와 분리해 두십시오.

과부하 — 콘센트, 확장 코드, 파워 스트립, 또는 기타 전원 연결 장치에 너무 많은

플러그를 사용해 과부하를 유발하지 마십시오.

이물질, 용액 유출 — 내부 고전압 부품과의 접촉으로 인한 화재나 감전에 의해 개

인적인 부상을 당하는 일을 피하기 위해 제품 안에 절대 금속 물체를 삽입하지 마십시오. 용액 유출 위험이 있다면 제품 사용을 삼가해 주십시오.

열 — 난방기, 열 조절장치, 스토브와 같은 열원 또는 스테레오 앰프를 포함해 열을

발생시키는 모든 종류의 장비 근처에서 이 제품을 사용하거나 보관하지 마십시 오.

서비스 — 모든 서비스는 서비스 센터에 문의하십시오. 커버 제거나 제품 분해를 시

도할 경우 위험한 높은 전압에 노출될 수 있습니다.

서비스가 필요한 손상 — 지정된 AC 어댑터를 사용하는 도중 아래 설명 중 하나가

발생할 경우 콘센트에서 어댑터를 뽑고 서비스를 요청하십시오.

a) 제품에 용액이 쏟아졌거나 다른 물체가 제품에 떨어졌습니다. b) 제품이 물에 노출되었습니다. c) 작동 지침을 준수하였음에도 불구하고 제품이 정상적으로 작동하지 않습니

다. 작동 지침에 설명되어 있는 카메라제어만 조정하십시오. 다른 카메라제어 를 잘못 조정할 경우 제품이 손상되어 공인 기술자에게 광범위한 수리를 맡겨 야 할 수도 있습니다.

d) 제품을 떨어뜨렸거나 어떤 형태로든 손상되었습니다. e) 제품 성능이 크게 달라졌습니다.

안전 주의 사항

부품 교환 — 부품 교환이 필요한 경우 서비스 센터가 제조업체에서 권장하는 원래

의 부품과 동일한 특성을 가진 부품들만 사용하도록 하십시오. 승인되지 않은 부품 교체는 화재, 감전을 유발하거나 기타 상해를 발생시킬 수 있습니다.

안전 검사 — 서비스나 수리를 끝낸 뒤 엔지니어에게 제품이 제대로 작동하는지 확

인을 요청하십시오.

이 기호가 표시된 정보를 준수하지 않고 제품을 사용하면 심각한 부상

위험

경고

주의

또는 생명의 위험이 있을 수 있습니다.

이 기호가 표시된 정보를 준수하지 않고 제품을 사용하면 부상 또는 생 명의 위험이 있을 수 있습니다.

이 기호가 표시된 정보를 준수하지 않고 제품을 사용하면 부상, 장비 손 상 또는 중요한 데이터의 손실이 초래될 수 있습니다.

카메라 취급

경고

( 카메라를 가연성 또는 폭발성 가스 근처에서 사용하지 마십시오.

• 화재나 폭발을 방지하기 위해 카메라를 가연성 또는 폭발성 가스 근처에서 사용하지 마십시오.

( 가까운 거리에 있는 사람 (유아, 아동 등) 에게 플래시를 사용하지 마십

시오.

• 가까운 거리에서 플래시 사진을 촬영할 때는 주의하십시오. 플래시를 발광 할 때, 특히 유아나 아동의 사진을 촬영할 때는 피사체 얼굴로부터 최소 1 m 이상 떨어지십시오. 피사체의 눈과 너무 가까운 거리에서 플래시가 발광되 면 일시적 시력 장애가 발생할 수 있습니다.

( 유아나 아동이 카메라를 만지지 않도록 하십시오.

• 심각한 부상을 초래할 수 있는 다음의 위험한 상황을 예방하기 위해, 카메라 는 항상 어린이나 유아의 손이 닿지 않는 곳에서 사용 및 보관하십시오.

• 카메라 스트랩에 감겨서 질식할 수도 있습니다.

• 배터리, 카드 또는 기타 작은 부품들을 삼킬 수 있습니다.

• 본인의 눈 또는 다른 어린이의 눈에 플래시를 발광할 수 있습니다.

• 카메라의 작동부에 의해 상해를 입을 수 있습니다.

( 카메라로 태양 또는 강한 빛을 직접 보지 마십시오.

• 눈의 손상을 방지하기 위해, 카메라로 태양 또는 기타 매우 강한 광원을 직접 보지 마십시오.

+ 70 hidden pages

Olympus CAMEDIA D-630 ZOOM Basic Manual

Specifications and Main Features

Frequently Asked Questions

User Manual