Oki B2400N, B2400, B2200N, B 2200 User Manual
B2200, B2200n, B2400, B2400n
Safety, Warranty and Regulatory Information . . . . . . . . . . . . . . . .2
Informations de sécurité, de garantie, et de réglementation . . . .10
Información sobre seguridad, garantía, y regulaciones . . . . . . . .18
Informações sobre segurança, garantia, e normativas . . . . . . . . .28
Country/Region • Pays/Région • País/región • País/região
United States and Canada, Etats-Unis et
Canada, Estados Unidos y Canadá
English
Safety Information . . . . . . . . . . . . . . . . . . . . . . 2
Warranty Information . . . . . . . . . . . . . . . . . . . . 4
Service and Support . . . . . . . . . . . . . . . . . . . . . 6
Regulatory Information . . . . . . . . . . . . . . . . . . . 7
Material Safety Data Sheet (MSDS) . . . . . . . . . . 8
Français
Informations sur la sécurité . . . . . . . . . . . . . . . .10
Information sur la garantie . . . . . . . . . . . . . . . .12
Service et soutien. . . . . . . . . . . . . . . . . . . . . . .14
Informations réglementaires . . . . . . . . . . . . . . .15
Fiche technique santé-sécurité (MSDS) . . . . . . . .16
Español
Información de Seguridad . . . . . . . . . . . . . . . . .18
Información sobre la garantía . . . . . . . . . . . . . .20
Servicio y Apoyo. . . . . . . . . . . . . . . . . . . . . . . .22
Información reglamentaria . . . . . . . . . . . . . . . .25
Hojas de Información sobre Seguridad
de los Materiales (MSDS). . . . . . . . . . . . . . . . 26
Mexico, México
Español
Información de Seguridad . . . . . . . . . . . . . . . . .18
Información sobre la garantía . . . . . . . . . . . . . .23
Servicio y Apoyo. . . . . . . . . . . . . . . . . . . . . . . .23
Información reglamentaria . . . . . . . . . . . . . . . .25
Hojas de Información sobre Seguridad
de los Materiales (MSDS). . . . . . . . . . . . . . . . 26
America Latina (otro),
Latin America (other)
Español
Información de Seguridad . . . . . . . . . . . . . . . . 18
Información sobre la garantía . . . . . . . . . . . . . . 24
Servicio y Apoyo . . . . . . . . . . . . . . . . . . . . . . . 24
Información reglamentaria . . . . . . . . . . . . . . . . 25
Hojas de Información sobre Seguridad
de los Materiales (MSDS) . . . . . . . . . . . . . . . . 26
English
Safety Information . . . . . . . . . . . . . . . . . . . . . . 2
Regulatory Information . . . . . . . . . . . . . . . . . . . 7
Material Safety Data Sheet (MSDS) . . . . . . . . . . . 8
Brasil, Brazil
Português
Informações de segurança . . . . . . . . . . . . . . . . 28
Informações sobre a garantia . . . . . . . . . . . . . . 30
Informações normativas. . . . . . . . . . . . . . . . . . 32
Ficha de Informação de Segurança
do Produto . . . . . . . . . . . . . . . . . . . . . . . . . . 33
English
Safety Information . . . . . . . . . . . . . . . . . . . . . . 2
Regulatory Information . . . . . . . . . . . . . . . . . . . 7
Material Safety Data Sheet (MSDS) . . . . . . . . . . 8
English
Safety Information . . . . . . . . . . . . . . . . . . . . . . 2
Regulatory Information . . . . . . . . . . . . . . . . . . . 7
Material Safety Data Sheet (MSDS) . . . . . . . . . . 8
1
Safety, Warranty and Regulatory Information
• Do not make any adjustments other than those outlined in
Safety Information,
120-Volt Models
Your OKI product has been carefully designed to give you
years of safe, reliable performance. As with all electrical
equipment, there are a few basic precautions you should
take to avoid hurting yourself or damaging the product.
• Carefully read the provided setup and operating
instructions.
• Save all provided documentation for future reference.
• Read and follow all warning and instruction labels on the
product itself.
• Unplug the product before you clean it. Use only a damp
cloth; do not use liquid or aerosol cleaners.
• Place your product on a firm, solid surface. If you put it on
something unsteady, it may fall and be damaged. If you
place it on a soft surface, such as a rug, sofa, or cushion,
the vents may be blocked, causing the product to
overheat.
• Protect your product from overheating. Make sure no
obstructions block the openings of the product. Do not put
the product on or near a heat source (such as a radiator or
heat register). Keep the product out of direct sunlight.
• Always use this product in a well ventilated area. Allow
enough room around the product for adequate ventilation
and easy access to the paper trays. If you put the product
in any kind of enclosure, make sure the enclosure is well
ventilated.
• Do not use your product near water. Do not spill liquid of
any kind into it.
• Be certain that your power source matches the rating
listed on the back of the product. If you are not sure,
check with your dealer or with your local power company.
• Do not connect this product to an uninterruptible power
supply (UPS). For further information please contact Oki
Data at 1-800-OKI-DATA.
• Your product has a grounded, three-prong plug as a safety
feature. This plug only fits into a grounded outlet. If the
plug does not fit, the outlet may be an older,
non-grounded type. Contact an electrician to have the
outlet replaced. Do not use an adapter to defeat the
grounding.
• Install the product near an easily accessed power outlet.
• Avoid damaging the power cord. Do not put anything on it
or place it where it will be walked on. If the cord becomes
damaged or frayed, replace it immediately.
• If you are using an extension cord or power strip with the
product, make sure that the total of the amperes required
by all the equipment on the extension is less than the
extension’s rating. The total ratings of all equipment
plugged into the outlet should not exceed 15 amperes.
• Do not poke anything into the ventilation slots of the
product. You could get an electrical shock or cause
hazardous electrical arcing, which could cause a fire.
• Aside from the routine maintenance described in the
documentation, do not try to service the product yourself.
Removing the cover may expose you to shocks or other
hazards.
the documentation. You may cause damage that will
require extensive repair work. The provided
documentation explains how to get your product serviced
by qualified Oki Data technicians.
If anything happens that indicates that your product is not
working properly or has been damaged, unplug it
immediately and follow the procedures in the provided
documentation for having your product serviced.
Here are some of the things to look for.
• The power cord or plug is frayed or damaged.
• Liquid has been spilled into the product, or the product has
been exposed to water.
• The product has been dropped, or the cabinet is damaged.
• The product does not function normally when you are
following the operating instructions.
2 - English
Safety Information,
220/240-Volt Models
This product has been carefully designed to give years of
safe, reliable performance. As with all electrical equipment,
however, there are a few basic precautions that should be
taken to avoid injury or damage:
Ensure this and all other documentation is both read carefully
and retained for future reference.
Ensure all warning and instruction labels on the product are
read, understood and followed in order to prevent any risk of
injury.
This product may be heavy. Please check the weight of the
product and take all necessary precautions to prevent the risk
of personal injury.
The product must be placed on a flat solid surface strong
enough to support its weight to prevent any risk of injury.
Ensure that there is adequate ventilation all around the
product to prevent overheating and any risk of fire.
Keep the product away from direct heat sources such as
radiators and out of direct sunlight to prevent any risk of
overheating.
The power supply required for this product is 220-240 VAC,
50/60 Hz. (For any DC powered product, the figures are 9.6-
31.2VDC, 4-1.8A.) Refer to your product's rating label on the
machine for full power rating details. Ensure that you have a
suitable power supply before connecting the product. If in
doubt contact your dealer or check with your local power
provider.
Ensure both the product and mains power switches are in the
OFF position before connecting the AC power cable.
Do not connect or disconnect the power plug with a wet hand
as this may cause electric shock.
Always hold the power plug to connect/disconnect the power
cable to/from the mains socket. Unplugging by pulling on the
cable can cause fraying and may lead to fire or electric shock.
This product has an earthed plug as a safety feature and will
only connect to an earthed socket. Do not attempt to defeat
the earthing or there is a risk of fire or shock.
If using an extension cable or power strip ensure that the total
current rating (amperes) of all connected equipment is less
than the maximum rating of the extension cable, power strip
or wall outlet. If the product is already supplied with a fitted
power strip then no additional power strip or extension cable
should be used to connect to the mains wall outlet. Otherwise,
fire or shock may occur.
Ensure the power cable is routed so as not to be damaged or
cause a trip hazard. If the cable becomes frayed or damaged
replace it immediately to prevent any risk of shock.
Do not twist, constrict or knot the power cable as this can
cause overheating which may lead to fire or electric shock.
Ensure the power socket to which the product is connected is
easily accessible at all times and not obstructed.
Use only the power cable supplied. Using a power cable not
intended for this product may lead to fire or electric shock.
To avoid risk of fire and electric shock, do not use the power
cable supplied with this product for any other electrical
equipment.
If you do not connect the power cord or any other cables only
as directed in the User's Guide, this may result in a fire.
It is recommended that the machine is switched off prior to
opening covers; otherwise there is a risk of electric shock.
When the product cover is open, do not touch the fuser unit or
print head as you may receive burns. Allow it to cool before
touching.
If the product casing gets extremely hot or smoke, unusual
smells or abnormal noises are emitted from the product, there
is a risk of fire. Unplug the mains connector and contact your
dealer.
If the product has been knocked over or damaged, there is a
risk of electric shock, fire and/or injury. Unplug the mains
connector and contact your dealer.
If any liquid (for example water) is allowed to enter the
product, there is a risk of fire. Unplug the mains connector
and contact your dealer.
Do not place containers containing liquid on the product as
electric shock, fire and/or injuries may occur.
If any foreign objects (for example clips) are allowed to enter
the product, there is a risk of electric shock, fire and/or injury.
Unplug the mains connector before removing the object.
Do not introduce foreign objects into the ventilation holes or
operate this product with any covers open or doors removed as
electric shock, fire and/or injuries may occur.
Do not use an extremely flammable spray near the product as
the product contains high temperature parts that may cause a
fire.
Switch the product off before cleaning to prevent any risk of
injury. Clean using a damp cloth. Do not use liquid or aerosol
cleaners.
Ensure loose clothing and hair is kept clear of moving parts
when the product is in operation to prevent possible risk of
injury.
Do not carry out any operations on the product that are not
specified in the User's Guide. This may result in electric shock,
fire and/or injury.
Do not touch the battery if one is fitted to the product. There
is a risk of explosion if the battery is replaced by an incorrect
type. The product battery should not require replacement
during the life of the product.
Do not throw toner cartridges or image drum cartridges into a
fire as you may receive burns from a dust explosion.
After installing additional memory, hard disk drive, or any
other internally fitted option, any covers removed or doors
opened must be closed or replaced and secured to prevent
risk of fire.
The acoustic noise of this product is less than 70 dB (A) as
measured in accordance with EN ISO 7779.
The operating condition range for your product is: 10 to 32°C
and 20 to 80% RH. Operation of the product outside this
range could result in damage to the product.
If a scanner, finisher etc. is fitted, exercise care when moving
these items so as to avoid risk of entrapment or personal
injury.
If the product is installed on a cabinet or high capacity feeder,
ensure wheel locks are applied once placed in final position for
use, to prevent risk of movement or injury.
3 - English
Limited Warranty, US and Canada
U.S. and Canada only
Oki Data Americas, Inc. (Oki Data) warrants this B2200
Series or B2400 Series printer (hereinafter "the Product") to
be free from defects in material and workmanship and will
remedy any such defect according to, the terms of this
Limited Warranty
Oki Data will repair or at its option, replace, with the same or
its functional equivalent, at no charge, any defective
component(s) of the Product for one (1) year from the date
of purchase except for the printhead (LED imaging array),
which is warranted for a period of five (5) years from the
date of purchase.
Limited Warranty
This
purchaser of the warranted item. This
not transferable. This
consumable items or supplies, such as toner cartridges,
image drums, ribbon cartridges, fuses, etc.
Overnight Exchange
US and Canada Only
Oki Data offers Overnight Exchange of the Product under
this
Limited Warranty
available in the United States and Canada and it does not
include the replacement or repair of the Product's
consumable items or supplies.
If you choose to use our Overnight Exchange service, call
1-800-654-3282 (1-800-OKI-DATA): our trained
personnel will try to solve your problem over the phone. If
they determine that your Product hardware is defective,
an exchange product will be shipped to you via overnight
carrier. Have your credit card available as our
representative will be asking for this information. You will
receive the exchange product the next business day—or
no later than the second business day.
Return the original Product to Oki Data by using the same
packaging materials you received with the exchange
product. The Product to be returned must be made
available for pickup by Oki Data's representative within
two (2) business days of your receipt of the exchange
product: failure to do so may result in your being charged
the full price of the exchange unit.
Before you ship the Product, remove the image drum and
toner cartridge to prevent damage to the Product during
shipment: failure to do so may result in your credit card
being charged for cleaning and/or repairs to the Product.
When Overnight Exchange is used, the returned machine
becomes the property of Oki Data, once it has been
picked up by Oki Data or its representative. Exchange
machines may be new or reconditioned, at the option of
Oki Data: the exchange machine becomes the property of
the customer when the returned machine has been picked
up by Oki Data's designated carrier.
The exchange printer will be warranted for thirty (30)
days or the remaining warranty period of the returned
Product, whichever is longer.
Overnight Exchange of the printer for a printhead failure
is limited to one (1) year from date of purchase. For the
remaining printhead warranty period, replacement will be
.
only extends to the original
Limited Warranty
Limited Warranty
. Overnight Exchange is only
is
does not extend to
on a parts only basis at an authorized service center or
authorized third party service organization. Call 1-800654-3282 (1-800-OKI-DATA) for authorized service
locations or if you would like to take advantage of our
Depot Repair Option.
To make a request or claim for service under this
Warranty
center, Oki Data at 1-800-654-3282 (1-800-OKI-DATA), or
www.okiprintingsolutions.com.
A written receipt for the Product, showing the date of
purchase, dealer's name, and both the model and serial
numbers of this Product must accompany any request or
claim for work to be performed under this
This
tear and shall not apply if the Product has been damaged
due to abuse, misuse, misapplication, accident, improper
storage, or installation, an unsuitable physical operating
environment, or as a result of service or modification by any
other than an authorized Oki Data service center.
THERE ARE NO EXPRESS WARRANTIES OTHER THAN
THOSE ON THE FACE HEREOF AND DESCRIBED ABOVE.
NO WARRANTIES WHETHER EXPRESS OR IMPLIED,
INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED
WARRANTIES OF MERCHANTABILITY OR FITNESS FOR
A PARTICULAR PURPOSE, SHALL EXTEND BEYOND THE
RESPECTIVE WARRANTY PERIODS DESCRIBED
ABOVE.
Some states do not allow limitations on how long an implied
warranty lasts, so the above limitation may not apply to you.
IN NO EVENT SHALL OKI DATA OR ITS AFFILIATES BE
LIABLE TO A PURCHASER OR ANY OTHER PERSON FOR
SPECIAL, COLLATERAL, PUNITIVE, INCIDENTAL OR
CONSEQUENTIAL DAMAGES INCLUDING LOST
PROFITS, BUSINESS REVENUE, GOODWILL OR
ANTICIPATED SAVINGS IN CONNECTION WITH OR
ARISING OUT OF THE PURCHASE OR USE OF THE OKI
DATA PRODUCT, WHETHER ARISING IN CONTRACT OR
IN TORT, WHETHER OR NOT CUSTOMER SHALL HAVE
INFORMED OKI DATA OF THE POSSIBILITY OR
LIKELIHOOD OF ANY SUCH DAMAGES.
Some states do not allow the exclusion or limitation of
incidental or consequential damages, so the above exclusion
may not apply to you.
ADDITIONAL WARRANTY DISCLAIMERS FOR ALL
PURCHASERS EXCEPT CONSUMERS:
Additional information on obtaining service under this
Limited Warranty
contacting the Oki Data dealer from whom the Product was
contact your local Oki Data authorized service
Limited Warranty
Limited Warranty
WHEN ANY OKI DATA PRODUCT SHALL BE
PURCHASED BY ANY PERSON SUCH THAT THE OKI
DATA PRODUCT IS NOT A "CONSUMER GOOD" (AS
DEFINED IN THE UNIFORM COMMERCIAL CODE
ADOPTED IN THE STATE OF PURCHASE OR IN OTHER
APPLICABLE LAW), OKI DATA EXPRESSLY
DISCLAIMS ALL IMPLIED WARRANTIES, INCLUDING
WITHOUT LIMITATION THE IMPLIED WARRANTIES
OF MERCHANTABILITY AND FITNESS FOR A
PARTICULAR PURPOSE
shall not apply to normal wear and
.
in the U.S. and Canada is available by
Limited
.
4 - English
purchased, by contacting Oki Data directly at
1-800-654-3282 (1-800-OKI-DATA), or by contacting one of
the service locations listed below. Spanish Only: call
1-856-222-5276. Canada Only: call 1-905-238-4275.
United States
Oki Data Americas, Inc.
2000 Bishops Gate Blvd.
Mt. Laurel, NJ 08054
Phone: 1-800-654-3282
Fax: 1-856-222-5247
This
Limited Warranty
Canada
Oki Data Americas, Inc.
2735 Matheson Blvd. East, Unit 1
Mississauga, Ontario
Canada L4W 4M8
Phone: 1-800-654-3282
Fax: 1-905-238-4421
applies to this Product. However, the
procedure for obtaining service may vary outside the
continental United States. Contact your Oki Data dealer for
such warranty service information.
This warranty gives you specific legal rights, and you may
also have other rights which vary from state to state.
5 - English
Service and Support,
US and Canada
U.S. and Canada only
Oki Data is firmly committed to the satisfaction of our
customers. If you have a problem that your customer
documentation cannot solve, contact the listed sources for
service or support.
Oki Data Authorized Service Providers
For the most comprehensive, up-to-date listing of Oki Data
authorized Service Centers in the United States and Canada:
• In the U.S. go to www.okiprintingsolutions.com.
• In Canada and the U.S., call 1-800-654-3282
(1-800-OKI-DATA).
Oki Data Contact Locations
United States
Oki Data Americas, Inc.
2000 Bishops Gate
Blvd.
Mt. Laurel, NJ 08054
Phone: 1-800-654-3282
Fax: 1-856-222-5247
Canada
Oki Data Americas, Inc.
2735 Matheson Blvd. East, Unit 1
Mississauga, Ontario
Canada L4W 4M8
Phone: 1-800-654-3282
Fax: 1-905-238-4421
Get started today by visiting http://MY.OKIDATA.com.
Customer Support Representatives
1-800-654-3282 (1-800-OKI-DATA)
Customer Support Representatives are available 24 hours a
day, 7 days a week. Please have the model number and
serial number for your machine handy. Be sure that you are
calling from a telephone close to your machine so you can
describe your problem accurately and follow up on the
suggestions of the Customer Support Representative right
while you are on the phone. Our Customer Support
Representatives are trained on all current OKI products.
They can answer your questions regarding:
• Locations of sales and service dealers
• Installation of your machine
• Usage/normal maintenance of your machine
• Error message interpretation/solutions
• Parts and supplies identification
• Consumer relations
Note: Customer Support Representatives are not trained
to provide assistance with the use of commercial
software packages. Please consult your software
user’s manual for times and availability of their
support.
Sales and Service Dealers
Consult the store location where you purchased your
machine, or contact Oki Data for the location of the nearest
Authorized Oki Data Service Dealer.
• Prices and minimum charges may vary.
• Proof of purchase is required for warranty work. Be sure to
retain your purchase documents.
Automated Services for Your Convenience
Quick Referrals
To get quick referrals for a local Sales and Service
Authorized Reseller, including products, parts and
consumable supplies, contact us at any time:
• 1-800-654-3282 (1-800-OKI-DATA)
• www.okiprintingsolutions.com
Your Own Personal Solutions Center
You can easily create your own Personal Solutions Center
providing up-to-the-minute Oki information specifically for
your product, including:
•Product news
• Manuals
•Drivers and utilities
• Material Safety Data Sheets
• Searchable knowledge base
•and much more!
Just take a few minutes setting it up once, then you can
check your Personal Solutions Center for the latest
information at any time.
6 - English
Regulatory Information
ENERGY STAR®
As an ENERGY STAR Partner, Oki Data has
determined that this product meets the
ENERGY STAR guidelines for energy
efficiency.
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the
receiver.
• Plug the unit into an outlet on a circuit different from that
to which the receiver is connected.
• Consult the dealer or an experienced radio/television
technician for help.
Note:
It is the responsibility of the user to obtain the
required shielded cable in order to ensure
compliance of this equipment with FCC regulations.
Year 2000 Compliance
This product is Year 2000 Compliant. It contains information
technology that accurately processes date and time data
between the years 1999 and 2000, and carries no issue for
the September 9, 1999 (9999) programming concern. This
product, when used in combination with products purchased
from other manufacturers, whose products properly
exchange data and time information, will accurately process
the date and time.
Federal Communications Commission (FCC)
Declaration of Conformity
1. Product Identification
Product Name Model Name
B2200, B2200n N22108A
B2400, B2400n N22109A
2. Statement
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1)
This device may not cause harmful interference, and (2)
this device must accept any interference received,
including interference that may cause undesired
operation.
3. Responsible Party
Oki Data Americas, Inc.
2000 Bishops Gate Boulevard
Mt. Laurel, NJ 08054-4620
1-800-654-3282 (1-800-OKI-DATA)
FCC Requirements for End Users
FCC Radio Frequency Interference Statement for
120-Volt Models
WARNING: This equipment has been tested and found to
comply with the limits for a Class B digital device, pursuant
to Part 15 of the FCC rules. These limits are designed to
provide reasonable protection against harmful interference
in a residential installation. This equipment generates, uses
and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause
harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more
of the following measures:
Changes or modifications not expressly approved by Oki
Data may void your authority to operate this device.
FCC Radio Frequency Interference Statement for 220/
240-Volt Models
WARNING: This equipment has been tested and found to
comply with the limits for a Class A digital device, pursuant
to Part 15 of the FCC rules. These limits are designed to
provide reasonable protection against harmful interference
in a commercial environment. This equipment generates,
uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may
cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to
cause harmful interference in which case the user will be
required to correct the interference at their own expense.
Note:
Changes or modifications not expressly approved by Oki
Data may void your authority to operate this device.
It is the responsibility of the user to obtain the
required shielded cable in order to ensure
compliance of this equipment with FCC regulations.
Industry Canada (IC) Radio Interference
Statements
120-Volt Models
This Oki Data apparatus complies with the Class B limits for
radio interference as specified in the IC Radio Interference
Regulations.
220/240-Volt Models
This Oki Data apparatus complies with the Class A limits for
radio interference as specified in the IC Radio Interference
Regulations.
European Union Council of the European
Communities Staterments for
220/240-Volt Models
Electromagnetic Conformance
This product complies with the requirements of the Council
Directive 89/336/EEC on the approximation of the laws of
the member states relating to electromagnetic compatibility.
Safety Conformance
This product is in conformity with Directive 73/23/EEC on
the harmonization of the laws of Member States relating to
electrical equipment designed for use within certain voltage
limits.
7 - English
Material Safety Data Sheet
#
58382301
Black Toner, Type X: P/N 43640301
Black Image Drum/with Toner, Type 11:
P/N 43650301
For more information, contact Oki Data at: 2000 Bishops
Gate Boulevard, Mount Laurel, NJ 08054-4620.
Emergency Information: call 1-800-654-3282; US and
Canada only.
Emergency First Aid Procedures ______
Toner inhaled.
Remove person to fresh air. Seek medical attention.
Toner swallowed (ingested)
Immediately seek medical attention. Never give anything by
mouth to an unconscious person. If possible, rinse out
mouth and give one or two glasses of water or milk to drink.
Toner gets in the eyes.
Flush eyes with large quantities of cool water for 15 minutes,
keeping the eyelids open with fingers. If necessary, seek
medical attention.
Toner gets on the skin.
Wash toner off the skin with plenty of cool water and soap. If
necessary, seek medical attention.
Note:
Small amounts of toner on skin or clothing can easily
be removed with soap and cold water. Hot water
makes toner harder to remove.
Hazardous Ingredients _____________
Carbon Black (4-8%)
CAS#: 1333-86-4.
OSHA TWA: 3.5 ppm.
ACGIH TLV: 3.5 ppm.
Styrene (<50 ppm)
CAS#: 100-42-6.
OSHA TWA: 50 ppm.
ACGIH TLV: 20 ppm.
Other Ingredients _________________
Styrene Acrylate Copolymer (70-90%)
CAS#: 25767-47-9.
Fatty Acid Ester (0-2.5%)
CAS#: 75587-84-7.
PMMA (0-3%)
CAS#: 9011-14-7
Silicon Dioxide (amorphous) (0-5%)
CAS#: 67762-90-7
Physical Data _____________________
Physical State:
Melting/Freezing Point:
Boiling Point:
PH:
Not available.
Vapor Pressure:
Vapor Density (Air=1):
Evaporation Rate (Butyl Acetate=1):
Specific Gravity (H2O=1):
Solubility in Water:
Solubility in Solvents:
Coefficient of water/oil Distribution:
Appearance and Odor:
Odor Threshold: Not available.
Solid.
110°C (230°F).
Not applicable.
Not available.
Not available.
Not available.
1.15.
Negligible.
Not available.
Not available.
Black powder, no odor.
Fire and Explosion Hazard Data _______
Minimal fire hazard. Large quantities may cause risk of dust
explosion.
Flash Point (Method Used):
Flammable Limits
Lower Explosive Limit:
Upper Explosive Limit:
Auto-Ignition Temperature
Explosion Data
Sensitivity to Mechanical Impact:
Sensitivity to Static Discharge:
Extinguishing Media:
foam.
Special Fire Fighting Procedures:
that may create a dust cloud, such as high pressure water
and/or steam. Avoid inhalation of smoke or gases. Wear
self-contained breathing apparatus.
Hazardous Combustion Products:
nitrogen.
Dry chemicals, CO2, water spray or
Not available.
60 g/m2.
Not available.
: Not available.
Not available.
Not available.
Do not use methods
Oxides of carbon and
Toxicological Properties_____________
Routes of Entry:
Effects of Acute Exposure:
LD50: >2000mg/kg (rat)
LC50: >4.98 mg/l (rat)
Effects of Chronic Exposure:
Exposure Limits:
Irritancy:
Skin Irritation: no irritant (rabbit)
Eye Irritation: minimal irritant (rabbit)
Sensitivity:
Carcinogenicity
IARC: Carbon Black: Group 2B, "Possible Carcinogen."
NTP: No components are listed.
OSHA: Carbon black is designated hazardous according to
OSHA 29 CFR 1910.1200.
Reproductive Toxicity:
Teratogenicity:
Mutagenicity:
Inhalation, Ingestion, Eyes, Skin.
Not available.
Not available.
Not available.
Not available.
Not available.
Negative (Ames Test).
8 - English
Name of Toxicoligically Synergistic Products:
available.
Not
Reactivity Data ___________________
Stability:
Conditions to Avoid:
[392°F]) and all sources of ignition
Polymerization:
Hazardous Decomposition or Byproducts:
Combustion products include harmful gases such as carbon
monoxide and nitrogen.
Incompatibility:
reducing agents.
Stable.
Avoid excess heat (over 200°C
Will not occur.
Avoid exposure to strong oxidizers or
Preventive Measures_______________
Personal Protective Equipment
Respiratory Protection:
spills, use dust respirator during cleanup.
Protective Gloves and/or Eye Protection:
normally required. For large spills, use rubber gloves and
safety goggles during cleanup.
Engineering Controls
Ventilation:
(general) recommended.
Other Protective Equipment and/or Hygienic
Practices:
Local exhaust recommended, mechanical
None.
Spill Cleanup
Small Spills
1. Remove sources of ignition.
2. Carefully clean up the spill with a wet cloth, avoiding
inhalation of fine dust.
Large Spills
1. Remove sources of ignition and keep unnecessary and
unprotected personnel away from area.
2. Wear protective gear: respirator, rubber gloves, safety
goggles.
3. Vacuum the spill: vacuum motor must be rated as dust
explosion-proof. Then wipe up remainder with a wet
cloth.
Waste Disposal
• Prevent release of material into natural waters and
sewers.
• Follow appropriate federal, state and local regulations.
• Small amounts can be incinerated.
Careful! Combustion can create harmful gases such as
carbon monoxide and nitrogen oxides.
• Large amounts must be passed to a licensed waste
contractor.
Precautions
Precautions for Handling or Storage:
reach of children. Protect from the sun. Store in a cool
room, under 104°F (40°C). Use with adequate ventilation.
Keep away from sparks and open flame. Keep away from
oxidizing materials.
Other Precautions:
Not normally required. For large
Not
Keep out of
None.
Shipping Information
Special Shipping Information:
regulated as hazardous materials by the DOT (United
States Department of Transportation).
This product is not
User’s Responsibility _______________
This bulletin cannot cover all possible situations which the
user may experience when using this product. Each aspect
of your operation must be examined in regard to if, or
where, additional precautions may be necessary. All health
and safety information contained in this bulletin must be
provided to your employees or customers. It is your
responsibility to use this information to develop appropriate
work practice guidelines and employee instructional
programs for your operation.
Preparation Date of MSDS ___________
Date:
August 15, 2007.
Prepared by:
Oki Data Americas, Inc
Engineering Services Department.
2000 Bishops Gate Blvd.
Mt. Laurel, NJ 08054-4620
Tel: (856) 235-2600
Fax: (856) 222-5320
http://www.okiprintingsolutions.com
my.okidata.com
9 - English
Informations de sécurité, de garantie, et de
réglementation
• Si vous utilisez une rallonge électrique ou une barre
Informations sur la sécurité,
Modèles de 120 volts
Votre produit OKI a été conçue avec soin pour vous fournir
des années de rendement sûr et fiable. Comme pour tout
matériel électrique, un certain nombre de précautions de
base doivent être observées pour vous protéger de toute
blessure ou éviter tout dommage à le produit.
• Lisez attentivement les directives d'installation et
d'utilisation fournies.
• Conservez tous les documents pour fins de référence
future.
• Lisez et observez les avertissements et directives des
étiquettes apposés sur le produit.
• Débranchez le produit avant de la nettoyer. Utilisez
uniquement un chiffon humide; n'utilisez pas de
nettoyants liquides ou en aérosol.
• Placez le produit sur une surface stable et solide. Sur une
surface instable, le produit peut tomber et être
endommagée. Évitez toute surchauffe de le produit. Ne la
placez pas sur une surface souple, comme une couverture,
un divan ou un coussin. Les aérateurs pourraient être
obstrués et provoquer une surchauffe de le produit.
• Protégez le produit contre la surchauffe. Vérifiez qu'aucun
aérateur n'est obstrué. Ne placez pas le produit sur une
source de chaleur (p. ex., radiateur ou grille de chauffage)
ou à proximité de celle ci. Protégez le produit contre les
rayons du soleil.
• Utilisez toujours le produit dans un endroit bien ventilé.
Prévoyez assez d'espace autour de le produit pour assurer
une ventilation adéquate et un accès facile aux bacs à
papier. Si vous placez le produit dans une armoire d'une
quelconque nature, assurez-vous qu'elle est bien ventilée.
• N'utilisez pas le produit à proximité d'un point d'eau.
Évitez de renverser quelque liquide que ce soit sur le
produit.
• Assurez-vous que la source d'alimentation correspond aux
exigences indiquées à l'arrière de le produit. En cas de
doute, communiquez avec votre détaillant ou fournisseur
d'électricité.
• Ne branchez pas ce produit dans un système
d'alimentation sans coupure. Pour plus d'information,
contactez Oki Data au 1 800 OKI-DATA.
• Pour des raisons de sécurité, le produit possède une prise
à trois broches de mise à la terre. Elle ne s'adapte qu'à
une prise murale reliée à la terre. Si vous ne pouvez pas la
brancher, votre prise de courant est sans doute un ancien
modèle sans prise de terre. Communiquez avec un
électricien pour la remplacer par une prise mise à la terre.
N'utilisez pas d'adaptateur pour contourner la mise à la
terre.
• Le produit doit être installée à proximité d'une prise de
courant aisément accessible.
• Évitez d’endommager le cordon d’alimentation. Évitez de
posez quoi que ce soit sur le cordon d'alimentation ou de
le placer dans une zone de passage. Si le câble est
endommagé ou effiloché, remplacez-le immédiatement.
d'alimentation avec le produit, assurez-vous que
l'ampérage nécessaire à l'ensemble de l'équipement relié
est inférieur à l'ampérage maximum pris en charge par la
rallonge. L'ampérage maximum de tout équipement
branché sur une seule ligne électrique ne doit
généralement pas dépasser 15 ampères.
• N'enfoncez aucun objet dans les fentes de ventilation
situées sur les côtés de ll produit, au risque d’être
électrocuté ou de provoquer un incendie.
• À l'exception de l'entretien de routine décrit dans la
documentation, n'effectuez aucune réparation sur le
produit. L'ouverture du capot peut vous exposer à des
risques d'électrocution ou autres.
• N'effectuez aucun réglage autre que ceux indiqués dans la
documentation. Vous pourriez provoquer des dommages à
l'appareil nécessitant de lourdes réparations. La
documentation fournie contient les informations requises
pour faire réparer votre produit par des techniciens
qualifiés Oki Data.
Si vous constatez le moindre signe indiquant le
fonctionnement inadéquat de le produit ou que celle-ci a été
endommagée, débranchez-la immédiatement et observez
ensuite la procédure décrite dans la documentation fournie
pour faire réparer le produit.
Vérifiez notamment les éléments suivants :
• Le câble d'alimentation est endommagé ou effiloché.
• Du liquide a été renversé dans le produit, ou le produit a
été en contact avec de l'eau.
• Le produit est tombée ou son boîtier a été endommagé.
• Le produit ne fonctionne pas normalement après avoir
suivi les directives d’utilisation.
10 - Français
Informations sur la sécurité,
Modèles de 220/240 volts
Ce produit a été conçu avec soin afin de vous garantir des
performances sûres et fiables pendant de nombreuses
années. Cependant, comme pour tout équipement
électrique, vous devez prendre quelques précautions
élémentaires afin d'éviter blessures et dommages :
Assurez-vous que ce document ainsi que toute autre
documentation a été lu avec attention et est conservé pour
servir ultérieurement de référence.
Assurez-vous que toutes les étiquettes d'avertissement et
d'instructions sur le produit sont lues, comprises et suivies
pour éviter tout risque de blessures.
Ce produit peut être lourd. Vérifiez son poids et prenez toutes
les précautions nécessaires pour éviter tout risque de
blessure.
Le produit doit être placé sur une surface plane et stable,
assez solide pour supporter son poids et éviter tout risque de
blessures.
Assurez-vous que la ventilation autour de du produit est
suffisante pour éviter une surchauffe et tout risque
d'incendie.
Tenez le produit à l'écart des sources de chaleur, telles que les
radiateurs, et à l'abri d'une lumière directe du soleil pour
éviter tout risque de surchauffe.
L'alimentation électrique requise par ce produit est 220240 V c.a., 50/60 Hz. (Pour les produits alimentés en courant
continu, l'alimentation électrique requise est la suivante : 9,631,2 V c.c., 4-1,8 A.) Reportez-vous à l'étiquette signalétique
de votre machine pour connaître tous les détails. Vérifiez que
votre source d'alimentation est appropriée avant de brancher
le produit. En cas de doute, contactez votre revendeur ou
demandez conseil à votre fournisseur local d'électricité.
Assurez-vous que l'interrupteur du produit et celui du secteur
sont sur OFF avant de brancher le câble d'alimentation.
Ne branchez ou ne débranchez pas la prise d'alimentation
avec les mains mouillées car vous pourriez être électrocuté.
Tenez toujours la prise pour brancher/débrancher le câble
d'alimentation de la prise secteur. Tirer sur le câble pour le
débrancher peut casser les fils du câble et provoquer un
incendie ou une électrocution.
Ce produit est équipé d'une prise de terre et ne doit être
connecté qu'à une prise dotée d'une prise de terre. Ne passez
pas outre cet élément de sécurité, il pourrait s'ensuivre un
risque d'incendie ou d'électrocution.
Si vous utilisez une rallonge ou une barrette d'alimentation,
assurez-vous que le courant total (ampères) de tous les
équipements connectés est inférieur à la spécification
maximum du câble de rallonge, de la barrette ou de la prise
murale. Si le produit est déjà fourni avec une barrette
d'alimentation intégrée, n'utilisez aucune autre barrette ou
rallonge pour la connexion à la prise murale, faute de quoi un
incendie ou une électrocution pourrait se produire.
Assurez-vous que le câble d'alimentation chemine sans risque
d'être endommagé ou de faire trébucher quelqu'un. S'il est
usé ou abîmé, remplacez-le immédiatement pour éviter tout
risque d'électrocution.
Ne tordez pas, ne comprimez pas et ne faites pas de nœuds
avec le câble d'alimentation car cela pourrait entraîner des
surchauffes et provoquer un incendie ou une électrocution.
Vérifiez que la prise secteur à laquelle est branché le produit
est toujours accessible facilement et qu'elle n'est pas
obstruée.
Utilisez uniquement le câble d'alimentation fourni. L'utilisation
d'un câble non approprié peut provoquer un incendie ou une
électrocution.
Pour éviter tout risque d'incendie et d'électrocution, n'utilisez
pas le câble fourni ici avec un autre équipement électrique.
Si vous ne connectez pas le cordon d'alimentation ou d'autres
câbles en respectant la méthode donnée dans le Guide de
l'utilisateur, vous pouvez provoquer un incendie.
Il est recommandé d'éteindre la machine avant d'en ouvrir
des capots, faute de quoi il pourrait s'ensuivre un risque
d'électrocution.
Quand le capot du produit est ouvert, ne touchez pas l'unité
de fusion ou la tête d'impression, car vous pourriez vous
brûler. Laissez-les refroidir avant de les toucher.
Si le boîtier du produit devient très chaud ou fume, s'il émet
des odeurs inhabituelles ou des bruits anormaux, il y a risque
d'incendie. Débranchez la prise secteur et contactez votre
revendeur.
Si le produit a été renversé ou endommagé, il existe un risque
d'électrocution, d'incendie et/ou de blessure. Débranchez la
prise secteur et contactez votre revendeur.
Si du liquide (par exemple de l'eau) pénètre dans le produit, il
y a risque d'incendie. Débranchez la prise secteur et
contactez votre revendeur.
Ne placez pas de conteneurs de liquide sur l'imprimante car
cela pourrait provoquer une électrocution, un incendie et/ou
des blessures.
Si des corps étrangers (par exemple des trombones)
pénètrent dans l'imprimante, il y a risque d'électrocution,
d'incendie et/ou de blessure. Débranchez la prise secteur
avant de retirer l'objet.
N'introduisez pas de corps étrangers dans les orifices de
ventilation et n'utilisez pas ce produit en laissant le capot
arrière ouvert car il y a alors risque d'électrocution, d'incendie
et/ou de blessures.
N'utilisez pas de spray inflammable près du produit car il
contient des pièces à haute température pouvant provoquer
un incendie.
Éteignez l'imprimante avant de la nettoyer pour éviter tout
risque de blessure. Utilisez un chiffon humide. N'utilisez pas
de nettoyant liquide ou en aérosol.
Assurez-vous que les pièces en mouvement de l'imprimante
ne peuvent pas happer des vêtements lâches ou des cheveux
lorsque le produit est en fonctionnement afin d'éviter tout
risque possible de blessures.
N'effectuez pas d'opérations non spécifiées dans le Guide de
l'utilisateur. Cela pourrait provoquer une électrocution, un
incendie et/ou des blessures.
Ne touchez pas la batterie (si le produit en utilise une). Il
existe un risque d'explosion si vous la remplacez par une
batterie de type incorrect. Il n'est normalement pas
nécessaire de remplacer la batterie du produit pendant la durée de
vie du produit.
Ne jetez pas les cartouches de toner ou de tambour au feu car
vous pourriez être brûlé par les explosions de poussières.
Après avoir installé de la mémoire supplémentaire, un disque
dur ou une autre option interne, vous devez refermer ou
remplacer les capots qui ont été retirés ou les portent qui ont
été ouvertes et les sécuriser pour éviter tout risque d'incendie
ou d'électrocution.
Le niveau acoustique de ce produit est inférieur à 70 dB (A)
conformément à la norme EN ISO 7779.
Les plages de fonctionnement du produit sont les suivantes :
10 à 32°C et 20 à 80 % HR. L'utilisation du produit en dehors
de ces plages pourrait endommager ce dernier.
Si vous montez des éléments tels que des scanners ou des
finisseurs, faites attention lorsque vous les déplacez afin de
ne pas vous coincer ou de vous blesser.
Si le produit est installé sur un meuble ou un chargeur haute
capacité, assurez-vous que les blocages de roues sont
enclenchés une fois le produit en position finale pour
utilisation, afin d'éviter tout risque de mouvement du produit
ou de blessures.
11 - Français
Loading...