Numark N4 DJ controller Getting Started [ml]
N4
QUICKSTART GUIDE
ENGLISH ( 3 – 8 )
GUÍA DE INICIO RÁPIDO
ESPAÑOL ( 9 - 14 )
GUIDE D'UTILISATION RAPIDE
FRANÇAIS ( 15 – 20 )
ITALIANO ( 21 – 26 )
KURZANLEITUNG
DEUTSCH ( 27 – 32 )
GUIDA RAPIDA
QUICKSTART GUIDE
CONTENTS
N4
USB cable
Power Adapter
2 software CDs
Quickstart Guide
Serato DJ Intro Overlay
Safety & Warranty Information Booklet
REGISTRATION
Please go to http://www.numark.com
up-to-date with any new product developments and provide you with world-class technical support, should you run
into any problems.
SYSTEM REQUIREMENTS
Serato DJ Intro Minimum PC Requirements:
• Windows 7 / Vista / XP 32-bit
• Windows 7 / Vista 64-bit
• 32-bit: 2 GHz Processor w/ 2GB RAM
• 64-bit: 2.2GHz Processor w/ 4GB RAM
• 30MB free hard drive space
Serato DJ Intro Minimum Mac Requirements:
• Mac OS X 10.7.1 / 10.6.8 / 10.5.8
• 32-bit: 1.8GHz Intel Processor w/ 1GB RAM
• 64-bit: 2.2GHz Intel Processor w/ 4GB RAM
• Mac OS X 10.5
• 1.8GHz Processor w/ 1GB RAM
• 30MB free hard drive space
to register your N4. Registering your product ensures that we can k eep you
VirtualDJ LE Minimum PC Requirements:
• Intel Pentium 4 or AMD Athlon XP
• 1024x768 SVGA video
• 512MB RAM (1GB Recommended)
• CD drive
• Free USB 1.1 port
• 20MB free on the hard drive
VirtualDJ LE Minimum Mac Requirements:
• Intel processor
• Mac OS X v10.5
• 1024MB RAM
• CD drive
• Free USB 1.1 port
• 30MB free hard drive space
N4 AND VirtualDJ LE SETUP
INSTALL THE DRIVER
WINDOWS
Driver:
If you plan to mix video and audio, install the included ASIO4ALL driver:
1. Insert the included driver installation DVD into your computer's DVD-ROM drive.
2. Double-click "My Computer" then double-click the disc. Once the disc's contents are shown, double-cli ck .exe
file.
3. Follow the on-screen instructions to install the driver.
MAC
There is no Mac driver needed to install.
3
VirtualDJ LE SETUP
PC
Before you can begin using N4 with your computer, you must install the included VirtualDJ LE software:
1. Please insert the included installation disc into your computer's DVD/CD drive.
2. Open the CD to view its contents, Open the folder titled "PC." and double-click the ".Msi file".
3. Follow the on-screen instructions.
To start using N4:
1. Use the included power adapter to connect the N4 to a power outlet..
2. Connect N4 to an available USB port on your computer. (If po ssible, use a USB port on t he rear panel of your
computer.)
3. Open VirtualDJ LE by double-clicking the icon on your computer's Deskt op (if you created a Des ktop shortcut)
or by going to Start All Programs VirtualDJ.
For more information on how to use VirtualDJ LE, please see the manual located on the disc.
Note: Full Screen video mapping is not supported in VirtualDJ LE.
MAC
Before you can begin using N4 with your computer, you must install the included VirtualDJ LE software:
1. Please insert the included installation disc into your computer's CD-ROM drive.
2. Open the CD to view its contents, open the folder titled "Mac." and double-click the ".pkg” file.
3. Follow the on-screen instructions.
To start using N4:
1. Use the included power adapter to connect the N4 to a power outlet..
2. Connect N4 to an available USB port on your computer. (If po ssible, use a USB port on t he rear panel of your
computer.)
3. Open VirtualDJ LE by going to Applications VirtualDJ.
For more information on how to use VirtualDJ LE, please see the manual located on the disc.
Note: Full Screen video mapping is not supported in VirtualDJ LE.
TIMECODE SETUP
To setup N4 Deck 1 for use with timecode (available only in VirtualDJ Pro):
1. Set the N4 rear panel USB IN REC/TIMECODE switch to ‘TIMECODE’.
2. Set the N4 front panel Source switch to “PC” to avoid hearing the timecode signal beeps.
3. Adjust the Line/Phono switch to the appropriate setting and send a timecode signal through the N4 In put 3 or
Input 4.
4. In VirtualDJ Pro, go to the Config menu and set the Sound Setup Inputs tab to “Single Timecode”.
5. In Timecode Confi g, select a Vinyl preset that matches the timecode signal source that you are sending
through the N4 input.
6. Adjust the settings to ensure Quality reaches 100% to control Deck 1.
To setup both N4 decks for use with timecode (available only in VirtualDJ Pro):
1. Set the N4 rear panel USB IN REC/TIMECODE switch to ‘TIMECODE’.
2. Set the N4 front panel Source switches to “PC” to avoid hearing the timecode signal beeps.
3. Adjust the Line/Phono switch to the appropriate setting and send a timecode signal through N4 Inputs 3 and 4.
4. In VirtualDJ Pro, go to the Config menu and set the Sound Setup Inputs tab to “Timecodes”.
5. In Timecode Config, select a Vin yl preset that matches the timecode signal sources that you are sending
through the N4 inputs.
6. Adjust the settings for Line 1 and Line 2 to ensure Quality reaches 100% to control both decks.
4
N4 AND SERATO DJ INTRO
WINDOWS
Before you can begin using N4 with your computer, install the Serato DJ Intro software:
1. Insert the installation disc into your computer's DVD/CD drive. (Free updates to the Serato DJ Intro software
are available online at http://www.serato.com. We recommend checking t he website for the latest update of
Serato DJ Intro before installing it on your computer.)
2. Open the CD to view its contents, open the folder titled “PC” and run the installer file.
3. Follow the on-screen instructions to install the software.
To start using N4:
1. Use the included power adapter to connect the N4 to a power outlet..
2. Connect N4 to an available USB p ort on your computer. (If possible, use a USB p ort on the rear panel of your
computer.)
3. Open Serato DJ Intro by double-clicking the icon on your computer's Desktop (if you created a Desktop
shortcut) or by going to:
Windows XP: Start Menu Programs Serato DJ Intro
Windows Vista & Windows 7: Windows Menu All Programs Serato DJ Intro
For more information on how to use Serato DJ Intro, please see the manual located on the disc.
MAC
Before you can begin using N4 with your computer, you must install the Serato DJ Intro software:
1. Insert the included disc into your computer's DVD/CD drive.
2. Open the CD to view its contents, open the folder titled "Mac" and run the installer file.
3. Follow the on-screen instructions to install the software.
To start using N4:
1. Use the included power adapter to connect the N4 to a power outlet..
2. Connect N4 to an available USB p ort on your computer. (If possible, use a USB p ort on the rear panel of your
computer.)
3. Open Serato DJ Intro by going to Applications Serato DJ Intro.
For more information on how to use Serato DJ Intro, please see the manual located on the disc.
FRONT PANEL
3 4
7
6
1
1. MIC 1 GAIN – This knob controls the microphone level being sent to the Master output.
2. MIC 2 GAIN – This knob controls the microphone level being sent to the Master output.
3. TREBLE – Adjusts the high (treble) frequencies for both mic inputs.
4. BASS – Adjusts the low (bass) frequencies for both mic inputs.
5. MIC ON/OFF SWITCH – Turns the mic channel on/off.
6. SOURCE (PC/INPUT 3) – Toggles between playback from your computer or input 3.
7. SOURCE (PC/INPUT 4) – Toggles between playback from your computer or input 4.
8. CF CONTOUR – Adjusts the slope of the crossfader response.
9. HEADPHONES – 1/8” and ¼” headphone jacks.
3
2
5
4
8
5
9
REAR PANEL
2 3
1
1. POWER SWITCH – Turns the unit’s power on/off.
2. POWER INPUT – Connect the included power cable here to power the unit.
3. USB – This USB connection sends and receives control information to/from a connected computer.
4. USB IN REC/TIMECODE – Selects whether you are using th e USB connection to input audio to the compute r
or send a timecode signal through to control the software (unsupported in VirtualDJ LE).
5. XLR OUTPUT – Balanced stereo output.
6. GROUNDING LUG – Used to ground a turntable to the chasis.
7. MASTER OUTPUT – Outputs the signal to speakers sent by the computer, the RCA inputs or the microphone
inputs.
8. BOOTH OUTPUT – Secondary output used to go to a pair of speakers.
9. LINE/PHONO – Selects whether the corresponding input is set to line level or phono level.
10. INPUT 3 – RCA input for line level or phono level devices.
11. INPUT 4 – RCA input for line level or phono level devices.
5
4
7
6
8
9
34
10
9
4
11
TOP PANEL
1. PITCH FADER – Controls the track's
playback speed. An LED next to the
fader will light up when set at 0%.
2. FX PARAM/ FX SELECT – Turn
this knob to select the FX
parameter to use in the software.
Also hold the Shift button while
turning this knob to select the FX to
use in the software.
3. FX PARAM 2 – Turn this knob to
adjust the parameter of the effect,
which will be displayed in the
software.
4. SAMPLE VOLUME – Turn this knob to adjust the volume of a sample in the software. SAMPLE VOLUME 1
and 2 are on the DECK 1 side, and SAMPLES VOLUME for Samples 3 and 4 are on DECK 2 side.
5. SAMPLE VOLUME – Turn this knob toadjust the volume of a sample in the software. SAMPLE VOLUME 1 and
2 are on the DECK 1 side, and SAMPLES VOLUME for Samples 3 and 4 are on DECK 2 side.
6. EFFECT/ DELETE – Press this button to activate or deacti vate the effect, which w ill be displayed in
the software. Hold Shift while pressing this button to enable Delete Cue Mode, so you can erase
assigned Cue Points.
7. EFFECT/ CUE 1 – Press this button to activate or deacti vate the effect which will be displ ayed in the
software. Also hold Shift while pressing this button to assign a Cue Point or return the track to that
Cue Point.
8. SAMPLE 1/ CUE 2 – Press this button to activate or deactivate the sample which will be dis played in
the software. Also hold Shift while pressing this button t o assign a Cue Point or return the track to
that Cue Point.
9. SAMPLE 2/ CUE 3 – Press this button to activate or deactivate the sample which will be dis played in
the software. Also hold Shift while pressing this button t o assign a Cue Point or return the track to
that Cue Point.
10. LOOP IN/ 1-2 – Press this to set a "Loop In" point where your loop will begin. Also hold Shift while
pressing this button to halve the length of the loop.
11. LOOP OUT/ 2X – Press this to set a "Loop Out" point where your loop will end. Also hold Sh ift while
pressing this button to double the length of the loop.
12. RELOOP/ LEFT – Press this to jump to the start of the loop and enable it. If the Deck is already
looping when you press it, the Audio Pointer will jump to the start of the loop and continue. (If no loop
is set, nothing will happen.)
13. SMART/ RIGHT – Press this button to adjust the parameter of the effect, which will be displayed in
the software.
14. CUE-MIX-VOLUME – Adjusts the audio level of the Cue channel. Turn to mix between Cue and Progra m in t h e
Headphone channel. When all the way to the left, only channels routed to CUE will be heard. W hen set all the
way right, only the Program mix will be heard.
VIRTUALDJ LE MAP
SAMPLE 1
VOLUME
SAMPLE 1
8
CUE 2 CUE 3
12
LEFT
SAMPLE 2
VOLUME
5
SAMPLE 2
SMART
RIGHT
1
FX PARAM 2
FX PARAM 1
FX SELECT
4
3
2
EFFECT EFFECT
6
10
7
CUE 1
LOOP OUT RELOOP
11
2X
DELETE
LOOP IN
1/2
6
9
13
15. VIDEO TRANSITION – When the Shift
button is pressed along with this the video
transition type in the software will be
adjusted.
16. BOOTH – Adjusts the level of the signal
going to the Booth output.
17. MASTER - Adjusts the level of the signal
going to the Master output.
18. LOAD – Assigns a track to a deck.
19. GAIN – Adjusts the channel level.
20. CHANNEL TREBLE – Adjusts the high
(treble) frequencies of the corresponding
channel.
21. MID – Adjusts the mid-range frequencies of
the corresponding channel.
22. BASS – Adjusts the low (bass) frequencies
of the corresponding channel.
23. CUE – Sends pre-fader audio to the Cue
Channel for headphone monitoring.
24. FADER – Adjusts the audio level on the
corresponding channel.
25. PITCH RANGE – Adjusts the percent
range of the pitch control.
26. KEYLOCK – This feature allows you to
change the speed of the song without
changing the key. The key of the song will
lock to the position of the pitch fader when
Keylock is engaged.
27. SCRATCH/SEARCH – Turn this knob to
scroll through lists of tracks and directories
in the software. When a directory is
selected, press the knob to
enter it. (Press BACK to move
up to the previous level.) If a
directory is currently selected,
the FOLDER LED will
illuminate. If a track is currently
selected, the FILE LED will
illuminate.
28. TAP – When Shift is held with
TAP, this will bring the TRACK
VIEW back (when EFFECTS
or LOOPS are being accessed
the DECK view will change
automatically. Pressing TAP
with Shift returns the view to
TRACK INFO.
29. SYNC – Syncs the tempo of
both decks together.
30. PITCH BEND – Press or hold
down either of these buttons to
temporarily adjust the track's
playback speed. When
released, the track playback
will return to the speed
designated by the PITCH
FADER.
31. CUE – Sends pre-fader audio
to the Cue Channel for
headphone monitoring.
32. PLAY/PAUSE– Starts or
resumes playback if the Deck is paused. Pauses playback if the Deck is playing.
33. VIDEO FADE – Fades in/out the video signal.
34. XFADER ASSIGN – Assigns a deck to the left or right side of the crossfader. When SHIFT is held, these
controls become VIDEO FADE ASSIGNS, allowing you to assign a video deck either side of the crossfader.
35. INPUT (PC-LINE) – Select whether to monitor the PC signal or line input signal.
36. CROSSFADER – Blends audio playing between the assigned Decks.
37. SHIFT – Used to access multiple functions assigned to buttons or knobs.
38. DECK – Changes between Decks 1/3 or 2/4 respectively (if software supports 4 Decks)
39. PLATTER – Touch- sensitive control wheels used to manipulate the sound source.
18
36
19
20
21
22
23
24
TREBLE
MID
35
PC
34
14
LOAD
BASS
CUE
37
INPUT
LINE
MIX-CUE-VOLUME
18 18
38
DECK
33
VID FADE
X-FADER ASSIGN
VIDEO TRANSITION
15
LOAD
POWER
USB
EFFECT
CUE 1
LOOP OUT RELOOP
2X
39
CUE
19
24
SAMPLE 3
CUE 2
LEFT
32
21 21
22
19
20 20
TREBLE
21
MID
22
BASS
CUE CUE
23 23
24
EFFECT
DELETE
LOOP IN
1/2
31
16
LOAD
18
19
20
TREBLE
MID
22
BASS BASS
23
24
SAMPLE 4
CUE 3
SMART
RIGHT
TREBLE
PITCH RANGE
- PITCH BEND +
17
LOAD
MID
CUE
25
KEYLOCK
26
SCRATCH
27
SEARCH
TAP
28
SYNC
29
30
7
SERATO DJ INTRO MAP
FX BEATS/MULT
FX 1 PARA
M
1
FX 1
5
9
Refer to this control map to see what software features can be controlled by N4. For more information see the manual
for Serato DJ Intro.
1. FX 1 PARAM
2. FX 2 PARAM
3. FX 3 PARAM
4. FX BEATS/MULTIPLIER
5. FX1
6. FX2
7. FX3
8. FX AUTO/TAP
9. LOOP IN
10. LOOP OUT
11. RELOOP
12. SHIFT
13. CUE MIX
14. CUE VOLUME
15. BROWSE
16. BOOTH VOLUME
17. MASTER VOLUME
18. LOAD 3
19. LOAD 1
20. LOAD 2
21. LOAD 4
22. GAIN
23. TIME ELAPSED/REMAINING
FX 2 PARA
M
2
FX 2 FX 3
6
10
FX 3 PARA
3
7
RELOOP
11
I
M
14
12
13
18
22
4
FX AUTO/TAP
8
23
15
19
22
16
20 21
22
22
17
12
FX 1 PARA
1
FX 1
5
9
M
FX 2 PARA
2
FX 2 FX 3
6
10
FX BEATS/MULT
FX 3 PARA
M
M
4
3
FX AUTO/TAP
8
7
RELOOP
11
23
I
8
GUÍA DE INICIO RÁPIDO
CONTENIDO DE LA CAJA
N4
Cable USB
Adaptador de alimentación
2 CD de software
Guía de inicio rápido
Plantilla de Serato DJ Intro
Folleto de información sobre la seguridad y la garantía
REGISTRO
Visite http://www.numark.com
actualizado con los nuevos desarrollos de productos y brinda rle apoyo técnico de categorí a mundial en caso de q ue
tenga algún problema.
REQUISITOS DE SISTEMA
Requisitos mínimos de PC para Serato DJ Intro:
• Windows 7 / Vista / XP de 32 bits
• Windows 7 / Vista de 64 bits
• 32 bits: Procesador de 2 GHz con 2 GB de RAM
• 64 bits: Procesador de 2.2 GHz con 4 GB de RAM
• 30 MB de espacio libre en disco duro
Requisitos mínimos de Mac para Serato DJ Intro:
• Mac OS X 10.7.1 / 10.6.8 / 10.5.8
• 32 bits: Procesador de 1.8 GHz con 1 GB de
RAM
• 64 bits: Procesador de 2.2 GHz con 4 GB de
RAM
• Mac OS X 10.5
• Procesador de 1.8 GHz con 1 GB de RAM
• 30 MB de espacio libre en disco duro
para registrar su N4. El registro de su producto asegura que podamos manten erle
Requisitos mínimos de PC para VirtualDJ LE:
• Intel Pentium 4 o AMD Athlon XP
• Video SVGA de 1024x768
• 512 MB de RAM (se recomienda 1 GB)
• Lectora de CD
• Puerto USB 1.1 libre
• 20 MB de espacio libre en el disco duro
Requisitos mínimos de Mac para VirtualDJ LE:
• Procesador Intel
• Mac OS X v10.5
• 1.024 MB de RAM
• Lectora de CD
• Puerto USB 1.1 libre
• 30 MB de espacio libre en disco duro
INSTALACIÓN DE N4 Y VirtualDJ LE
INSTALACIÓN DEL DRIVER
WINDOWS
Driver:
Si piensa mezclar video y audio, instale el driver ASIO4ALL incluido:
1. Inserte el DVD de instalación del driver incluido en la lectora de DVD-ROM de la computadora.
2. Haga doble clic en "My Computer" (Mi PC) y luego doble clic en el disco. Una vez que se muestre el
contenido del disco, haga doble clic en el archivo .exe.
3. Siga las instrucciones de la pantalla para instalar el driver.
MAC
No es necesario instalar ningún driver para Mac.
9
INSTALACIÓN DE VirtualDJ LE
PC
Para poder usar el N4 con la computadora, debe instalar el software VirtualDJ LE incluido:
1. Inserte el disco de instalación incluido en la lectora de DVD/CD de su computadora.
2. Abra el CD para ver su contenido, abra la carpeta llamada "PC" y haga doble clic en el archivo ".Msi".
3. Siga las instrucciones de la pantalla.
Para comenzar a usar N4:
1. Utilice el adaptador de corriente incluido para conectar la N4 a una toma de corriente.
2. Conecte el N4 a un puerto USB disponible de la computadora. (Si es posible, use un puerto USB del panel
trasero de la computadora.)
3. Abra VirtualDJ LE haciendo doble clic en el icono del escritorio de la computadora (si creó un acceso directo
desde el escritorio) o yendo a Start All Programs VirtualDJ (Inicio Todos los Programas > VirtualDJ).
Para más información acerca de cómo usar VirtualDJ LE, consulte el manual incluido en el disco.
Nota: El mapeo de video de pantalla completa no se soporta en VirtualDJ LE.
MAC
Para poder usar el N4 con la computadora, debe instalar el software VirtualDJ LE incluido:
1. Inserte el disco de instalación incluido en la lectora de CD-ROM de su computadora.
2. Abra el CD para ver su contenido, abra la carpeta llamada "Mac" y haga doble clic en el archivo ".pkg".
3. Siga las instrucciones de la pantalla.
Para comenzar a usar N4:
1. Utilice el adaptador de corriente incluido para conectar la N4 a una toma de corriente.
2. Conecte el N4 a un puerto USB disponible de la computadora. (Si es posible, use un puerto USB del panel
trasero de la computadora.)
3. Abra VirtualDJ LE yendo a Applications VirtualDJ (Aplicaciones VirtualDJ.
Para más información acerca de cómo usar VirtualDJ LE, consulte el manual incluido en el disco.
Nota: El mapeo de video de pantalla completa no se soporta en VirtualDJ LE.
CONFIGURACIÓN DEL CÓDIGO DE TIEMPO
Para configurar la bandeja 1 de N4 a fin de usarla con código de tiempo (sólo disponible en VirtualDJ Pro):
1. Coloque el interruptor del panel trasero del N4 USB IN REC/TIMECODE en ‘TIMECODE’ (Código de tiempo).
2. Coloque el interruptor del panel frontal del N4 en “PC” para evitar oír los pitidos del código de tiempo.
3. Ajuste el conmutador línea/fonográfico a la posición apropiada y envíe una señal d e código de tiempo a través
de la entrada 3 o 4 de N4.
4. En VirtualDJ Pro, vaya al menú Config y configure la pestaña Sound Setup Inputs (Configuración de
sonido > Entradas) “Single Timecode” (Código de tiempo simple).
5. En Timecode Config (Configuración del código de tiempo) , seleccione un preset de vinilo que coincida con la
fuente de señal de código de tiempo que está enviando a través de la entrada del N4.
6. Ajuste los parámetros a fin de asegurar que Quality (Calidad) llegue al 100% para controlar la bandeja 1.
Para configurar ambas bandejas de N4 a fin de usarlas con código de tiempo (sólo dis ponible en VirtualDJ
Pro):
1. Coloque el interruptor del panel trasero del N4 USB IN REC/TIMECODE en ‘TIMECODE’ (Código de tiempo).
2. Coloque los interruptores del panel frontal del N4 en “PC” para evitar oír los pitidos del código de tiempo.
3. Ajuste el conmutador línea/fonográfico a la posición apropiada y envíe una señal d e código de tiempo a través
de la entrada 3 o 4 de N4.
4. En VirtualDJ Pro, vaya al menú Config y configure la pestaña Sound Setup Inputs (Configuración de
sonido > Entradas) como “Timecodes” (Códigos de tiempo).
5. En Timecode Config (Configuración del código de tiempo), seleccione un preset de vinilo que coincida con las
fuentes de señal de código de tiempo que está enviando a través de las entradas del N4.
6. Ajuste los parámetros de Line 1 (Línea 1) y Line 2 a fin de asegurar que Quality alcance el 100% para
controlar ambas bandejas.
10
N4 Y SERATO DJ INTRO
WINDOWS
Para poder usar el N4 con su computadora, instale el software Serato DJ Intro:
1. Inserte el disco de instalación incluido en la lectora de DVD/CD de su computadora. (Hay disponibles
actualizaciones gratuitas del software Serato DJ Intro por Internet en http://www.serato.com. Recomendamos
verificar en el sitio web para obtener la actualización más reciente de Serato DJ Intro antes de i nstalarlo en la
computadora.)
2. Abra el CD para ver su contenido, abra la carpeta llamada "PC" y ejecute el archivo instalador.
3. Siga las instrucciones de la pantalla para instalar el software.
Para comenzar a usar N4:
1.
Utilice el adaptador de corriente incluido para conectar la N4 a una toma de corriente.
2. Conecte el N4 a un puerto USB disponible de la computadora. (Si es posible, use un puerto USB del panel
trasero de la computadora.)
3. Abra Serato DJ Intro haciend o doble clic e n el icono del escri to rio de la comput adora (si creó un acceso directo
desde el escritorio) o yendo a:
Windows XP: Menú Start Programs Serato DJ Intro (Inicio Programas Serato DJ Intro)
Windows Vista y Windows 7: Menú Windows All Programs Serato DJ Intro
Serato DJ Intro)
Para más información acerca de cómo usar Serato DJ Intro, consulte el manual incluido en el disco.
MAC
Para poder usar el N4 con su computadora, debe instalar el software Serato DJ Intro:
1. Inserte el disco incluido en la lectora de DVD/CD de su computadora.
2. Abra el CD para ver su contenido, abra la carpeta llamada "Mac" y ejecute el archivo instalador.
3. Siga las instrucciones de la pantalla para instalar el software.
Para comenzar a usar N4:
1.
Utilice el adaptador de corriente incluido para conectar la N4 a una toma de corriente.
2. Conecte el N4 a un puerto USB disponible de la computadora. (Si es posible, use un puerto USB del panel
trasero de la computadora.)
3. Abra Serato DJ Intro yendo a Applications Serato DJ Intro (Aplicaciones Serato DJ Intro).
Para más información acerca de cómo usar Serato DJ Intro, consulte el manual incluido en el disco.
(Todos los programas
PANEL FRONTAL
3 4
7
6
1
1. GANANCIA DEL MICRÓFONO 1 – Con esta perilla se controla el nivel de micrófono enviado a la salida
Master (Maestra).
2. GANANCIA DEL MICRÓFONO 2 – Con esta perilla se controla el nivel de micrófono enviado a la salida
Master.
3. AGUDOS – Permite ajustar las frecuencias altas (agudos) de ambas entradas de micrófono.
4. GRAVES – Permite ajustar las frecuencias bajas (graves) de ambas entradas de micrófono.
5. INTERRUPTOR DE ENCENDIDO/APAGADO DE MICRÓFONO – Permite encender y apagar el canal de
micrófono.
6. FUENTE (PC/ENTRADA 3) – Permite conmutar entre la reproducción desde la computadora o la entrada 3.
7. FUENTE (PC/ENTRADA 4) – Permite conmutar entre la reproducción desde la computadora o la entrada 4.
8. CONTORNO DE CF – Permite ajustar la pendiente de la respuesta del crossfader.
9. AURICULARES – Conectores para auriculares de 1/8” y ¼”.
3
2
5
4
8
9
11
Loading...