SINGLE PHASE
POWER LIMITER
OM-110
1. Input terminals (voltage measurement circuit
and power supply)
2. POWE LOAD LED indicator
3. Digital LED indicator for measured and
controlled parameters
4. Multiply factor switch k (1 or 10 ) which sets
the range for the knob “maximal power
capacity” 0-2 kW or 0-20kW (kVA).
5. Mode selection switch – active power limiting//
total power limiting
6. Overload LED indicator
7. Adjustment knob – Maximal power threshold –
Wmax
8. Autoreclosing time delay (t
knob
9. Tripping time delay (t
10. Output terminals ~250V AC, 8A
Figure 1 – Front panel and main knobs and controls.
www.novatek-electro.com
off
) – adjustment
on
) – adjustment knob
Loading...