Norcent LM560 User Manual

LM560

LCD MONITOR

MANUAL

Thank you very much for choosing the Norcent Product.
We recommend that you take a few minutes to read carefully through this manual
before installing and switching on the product. Please keep this manual in a safe
place for your future reference.

Operation Instructions

Thank you for purchasing this monitor, a high-resolution multi-scan
color monitor.

Please read this guide thoroughly before installation.

FCC RADIO FREQUENCY INTERFERENCE STATEMENT
WARNING: (FOR FCC CERTIFIED MODELS)

This monitor has been tested and found compliant with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide proper protection against harmful
interference to a residential installation. This monitor generates, uses,
and can radiate radio frequency energy. Harmful interference to radio
communication may be led as a result if it‘s not properly installed and
used. However, there is no guarantee that interference will not occur
in a particular installation. If this monitor does cause serious
interference to radio or television reception, resetting the monitor may
determine it. Moreover, users are encouraged to correct interference
by doing one or more of the following:

 Reorient or relocate the receiving antenna.
 Move the monitor and the receiver further away from each other.
 Connect the monitor into an outlet on a circuit different from that

to which the receiver is connected.

 Consult your local dealer or an qualified technician

FCC Warning

To assure a continued FCC compliance, a user must use a grounded
power supply cord and the provided shielded video interface cable
with bonded ferrite cores. Also, any unauthorized changes or
modifications to this monitor would void the user‘s authority to
operate this device.

Note: If necessary, shielded interface cables and AC power cord must
be used to meet the emission level limits.

EMI Certification

The Class B digital apparatus meets all requirements of the Canadian
Interference-Causing Equipment Regulation.
Cet appareil numerique de class B respecte toutes les exigences du
Reglement sur le materiel brouilleur du Canada.

.

Content

Safety Precautions ......................................................................1

First Setup....................................................................................2

Front Panel Control .....................................................................3

Installation ...................................................................................3

Using OSD Functions..................................................................4

Timing modes............................................................................10

Technical Information ...............................................................11

Care and Maintenance ...............................................................12

Troubleshooting.........................................................................12

Safety Precautions

This monitor is manufactured and tested on a ground principle
that a user’s safety comes first. However, improper use or
installation may result danger to the monitor as well as to the
user. Carefully go over the following WARNINGS before
installation and keep this guide handy.

WARNINGS:

 This monitor should be operated only at the correct power

sources indicated on the label on the rear end of the monitor.
If you’re unsure of the power supply in your residence,
consult your local dealer or power company.

 Do not try to repair the monitor yourself as it contains no

user-serviceable parts. The monitor should only be repaired
by a qualified technician.

 Do not remove the monitor cabinet. There is high-voltage

parts inside that may cause electric shock to human bodies,
even when the power cord is disconnected .

 Stop using the monitor if the cabinet is damaged. Have it

checked by a service technician.

 Put your monitor only in a clean, dry environment. Unplug

the monitor immediately if it gets wet and consult
your service technician.

 Always unplug the monitor before cleaning it. Clean the

cabinet with a clean, dry cloth. Apply non-ammonia based
cleaner onto the cloth, not directly onto the glass screen.

 Keep the monitor away from magnetic objects, motors, TV

sets, and transformer.

 Do not place heavy objects on the cable or power cord.

 For PLUG CABLE EQUIPMENT, the Socket-outlet shall

be installed near the equipment and shall be easily
accessible.

1

First Setup

Congratulation for purchasing this monitor of high performance!
This monitor comes with the following accessories:

 Attached video Cable (15 pin D-SUB)
 Power Cable
 Audio Cable
 User Guide Book

Quick Installation

1. Connect video cable

Make sure both the monitor
and computer are powered
OFF. Connect the video cable
to the computer.

2. Connect power cord

Connect the power cord to a
properly grounded AC outlet,
then to the monitor.

3. Power-ON computer and
monitor

Power-ON the computer, then
Power-ON the monitor.

4.

Windows users : Setting the
Timing Mode (Resolution and

Refresh Rate)

Example: 1024 x 768 @ 60 Hz

Resolution Right-click on the
Windows desktop > Properties >
Settings > “Desktop Area”. Set
the resolution.
Refresh Rate (vertical frequency)
See your graphic card’s user
guide for instructions.

2

Front Panel Control

   

 OSD ON/OFF  ENTER
 SCROLL DOWN  POWER INDICATOR
 SCROLL UP  POWER ON/OFF

Installation

  

POWER INPUT (AC INPUT)



VIDEO CABLE



AUDIO IN



3