Nokia T6EQ1 Manual

0 (0)

SCt4812ET Optimization/ATP

Manual

Software Release R16.1.x.x

English

Aug 2002 68P09255A57- 2

800 and 1900 MHz

CDMA

PRELIMINARY

Notice

While reasonable efforts have been made to assure the accuracy of this document, Motorola, Inc. assumes no liability resulting from any inaccuracies or omissions in this document, or from use of the information obtained herein. The information in this document has been carefully checked and is believed to be entirely reliable. However, no responsibility is assumed for inaccuracies or omissions. Motorola, Inc. reserves the right to make changes to any products described herein and reserves the right to revise this document and to make changes from time to time in content hereof with no obligation to notify any person of revisions or changes. Motorola, Inc. does not assume any liability arising out of the application or use of any product, software, or circuit described herein; neither does it convey license under its patent rights or the rights of others.

It is possible that this publication may contain references to, or information about Motorola products (machines and programs), programming, or services that are not announced in your country. Such references or information must not be construed to mean that Motorola intends to announce such Motorola products, programming, or services in your country.

Copyrights

This instruction manual, and the Motorola products described in this instruction manual may be, include or describe copyrighted Motorola material, such as computer programs stored in semiconductor memories or other media. Laws in the United States and other countries preserve for Motorola certain exclusive rights for copyrighted material, including the exclusive right to copy, reproduce in any form, distribute and make derivative works of the copyrighted material. Accordingly, any copyrighted Motorola material contained herein or in the Motorola products described in this instruction manual may not be copied, reproduced, distributed, merged or modified in any manner without the express written permission of Motorola. Furthermore, the purchase of Motorola products shall not be deemed to grant either directly or by implication, estoppel, or otherwise, any license under the copyrights, patents or patent applications of Motorola, as arises by operation of law in the sale of a product.

Usage and Disclosure Restrictions

License Agreement

The software described in this document is the property of Motorola, Inc. It is furnished by express license agreement only and may be used only in accordance with the terms of such an agreement.

Copyrighted Materials

Software and documentation are copyrighted materials. Making unauthorized copies is prohibited by law. No part of the software or documentation may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language or computer language, in any form or by any means, without prior written permission of Motorola, Inc.

High Risk Activities

Components, units, or third-party products used in the product described herein are NOT fault-tolerant and are NOT designed, manufactured, or intended for use as on-line control equipment in the following hazardous environments requiring fail-safe controls: the operation of Nuclear Facilities, Aircraft Navigation or Aircraft Communication Systems, Air Traffic Control, Life Support, or Weapons Systems (“High Risk Activities”). Motorola and its supplier(s) specifically disclaim any expressed or implied warranty of fitness for such High Risk Activities.

Trademarks

and Motorola are registered trademarks of Motorola, Inc.

Product and service names profiled herein are trademarks of Motorola, Inc. Other manufacturers’ products or services profiled herein may be referred to by trademarks of their respective companies.

Printed on

Recyclable Paper

REV012501

SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE

SCt4812ET Optimization/ATP

Manual

Table of Contents

Aug 2002

SCt4812ET Optimization/ATP Manual Software Release R16.1.x.x

PRELIMINARY

Table of Contents			68P09255A57-2

		Contents
FCC Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .			. . . . . . . . xviii
		Content . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .	. . . . . . . xviii
		FCC Part 15 Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .	. . . . . . . xviii
		FCC Part 68 Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .	. . . . . . . xix
Foreword . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .			. . . . . . . xx
General Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .			. . . . . . . xxii
Revision History . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .			. . . . . . . xxiv
Chapter 1 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .			. . . 1-1
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .			. . . . . . . 1-2
		Scope of This Document . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .	. . . . . . . 1-2
		Document Composition . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .	. . . . . . . 1-2
		CDMA LMF Product Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .	. . . . . . . 1-3
		Online Help . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .	. . . . . . . 1-3
		Why Optimize? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .	. . . . . . . 1-3
		What Is Optimization? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .	. . . . . . . 1-3
		When to Optimize . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .	. . . . . . . 1-5
Documentation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .			. . . . . . . 1-6
Site Documents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .			. . . . . . . 1-6
		Product Documentation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .	. . . . . . . 1-6
Test Equipment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .			. . . . . . . 1-7
		Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .	. . . . . . . 1-7
		LMF Hardware Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .	. . . . . . . 1-8
		Test Equipment Guidelines . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .	. . . . . . . 1-8
		Test Equipment Calibration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .	. . . . . . . 1-8
		Test Cable Calibration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .	. . . . . . . 1-9
		Equipment Warm-up . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .	. . . . . . . 1-9
		Test Equipment List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .	. . . . . . . 1-9
		Optional Equipment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .	. . . . . . . 1-12
Abbreviations and Acronyms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .			. . . . . . . 1-13
BTS Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .			. . . . . . . 1-15
		Major Components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .	. . . . . . . 1-16
		RF Cabinet Internal FRUs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .	. . . . . . . 1-17
Sector Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .			. . . . . . . 1-22
Power Cabinet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .			. . . . . . . 1-25
		Internal FRUs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .	. . . . . . . 1-26
Chapter 2 Power Up Procedures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .			. . . 2-1
Prepower-up . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .			. . . . . . . 2-2
		Cellsite Types . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .	. . . . . . . 2-2
		CDF . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .	. . . . . . . 2-2
		Site Equipage Verification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .	. . . . . . . 2-2
		Initial Installation of Boards/Modules . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .	. . . . . . . 2-2
		Setting Frame C-CCP Shelf Configuration Switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .	. . . . . . . 2-3
		Checking for shorts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .	. . . . . . . 2-3
		Cabling Inspection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .	. . . . . . . 2-4
		Initial Inspection and Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .	. . . . . . . 2-4
		AC Power Check . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .	. . . . . . . 2-4

	ii	SCt4812ET Optimization/ATP Manual Software Release R16.1.x.x	Aug 2002

PRELIMINARY

	68P09255A57-2		Table of Contents

AC Power Up Sequence . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .			. . . . . . . . . . . . .	2-6
	Applying AC Power . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .		. . . . . . . . . . . . .	2-6
	Power Cabinet Power Tests . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .		. . . . . . . . . . . . .	2-7
DC Power Pre-test . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .			. . . . . . . . . . . . .	2-8
	DC Power Checks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .		. . . . . . . . . . . .	2-8
	RF Cabinet Power Up . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .		. . . . . . . . . . . .	2-9
Battery Test . . .		. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .	. . . . . . . . . . . .	2-11
	Charge Test (Connected Batteries) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .		. . . . . . . . . . . .	2-11
	Discharge Test . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .		. . . . . . . . . . . .	2-12
Heat Exchanger Power Up . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .			. . . . . . . . . . . .	2-13
Chapter 3 Optimization/ATP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .			. . . . . . . .	3-1
Basic Optimization . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .			. . . . . . . . . . . .	3-2
	Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .		. . . . . . . . . . . .	3-2
	Optimization Process . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .		. . . . . . . . . . . .	3-2
	Cell-site	Types . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .	. . . . . . . . . . . .	3-3
	Cell-site	Data File . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .	. . . . . . . . . . . .	3-3
	BTS System Software Download . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .		. . . . . . . . . . . .	3-4
	Site Equipage Verification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .		. . . . . . . . . . . .	3-4
	Isolate BTS from T1/E1 Spans . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .		. . . . . . . . . . . .	3-4
Configure Channel Service Unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .			. . . . . . . . . . . .	3-5
Alarm and Span Line Cable Pin/Signal Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .			. . . . . . . . . . . .	3-7
	Alarm and Span Line Cable Pin/Signal Information . . . . . . . . . . . . . . . . . . . . . . . . . . . .		. . . . . . . . . . . .	3-8
	T1/E1 Span Isolation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .		. . . . . . . . . . . .	3-12
	Isolate BTS from T1/E1 Spans . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .		. . . . . . . . . . . .	3-12
LMF Operation .		. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .	. . . . . . . . . . . .	3-13
	Preparing the LMF . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .		. . . . . . . . . . . .	3-13
	LMF Operating System Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .		. . . . . . . . . . . .	3-13
	CDMA LMF Home Directory . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .		. . . . . . . . . . . .	3-14
	Copy CBSC CDF Files to the LMF Computer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .		. . . . . . . . . . . .	3-14
	Creating a Named HyperTerminal Connection for MMI Connection . . . . . . . . . . . . . .		. . . . . . . . . . . .	3-16
	Folder Structure Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .		. . . . . . . . . . . .	3-18
	LMF to BTS Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .		. . . . . . . . . . . .	3-19
	Pinging the Processors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .		. . . . . . . . . . . .	3-20
	Log into and out of the BTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .		. . . . . . . . . . . .	3-21
Download Files to the LMF - Site Specific BTS Files . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .			. . . . . . . . . . . .	3-22
	Download Files to the LMF - Master-bts-cdma Files . . . . . . . . . . . . . . . . . . . . . . . . .		. . . . . . . . . . . .	3-22
	Create BTS Specific CDF File . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .		. . . . . . . . . . . .	3-25
	Update BTS Specific CDF File Device Load Version and Site Type . . . . . . . . . . . . . .		. . . . . . . . . . . .	3-25
	Update Antenna Mapping Files . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .		. . . . . . . . . . . .	3-26
	. . . . . . . .	. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .	. . . . . . . . . . . .	3-26
Operating the LMF . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .			. . . . . . . . . . . .	3-28
	Basic Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .		. . . . . . . . . . . .	3-28
	Logging into a BTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .		. . . . . . . . . . . .	3-29
	Logging Out . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .		. . . . . . . . . . . .	3-31
	Establishing an MMI Communication Session . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .		. . . . . . . . . . . .	3-32
	BTS Download Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .		. . . . . . . . . . . .	3-33
	Verify GLI ROM Code Loads . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .		. . . . . . . . . . . .	3-35
	Download RAM Code and Data to MGLI and GLI . . . . . . . . . . . . . . . . . . . . . . . . . . . . .		. . . . . . . . . . . .	3-35
	Download RAM Code and Data to Non-GLI Devices . . . . . . . . . . . . . . . . . . . . . . . . . .		. . . . . . . . . . . .	3-36
System Tests . . .		. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .	. . . . . . . . . . . .	3-38

	Aug 2002	SCt4812ET Optimization/ATP Manual Software Release R16.1.x.x		iii

PRELIMINARY

Table of Contents			68P09255A57-2

	Select CSM Clock Source . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .		. . . . . . . . 3-38
	Enable CSMs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .		. . . . . . . 3-38
	Enable MCCs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .		. . . . . . . 3-39
	Clock Synchronization Manager System Time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .		. . . . . . . 3-40
	LFR/HSO	. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .	. . . . . . . 3-40
	CSM Frequency Verification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .		. . . . . . . 3-41
	Test Equipment Setup
	(GPS & LFR/HSO Verification) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .		. . . . . . . 3-41
	GPS Initialization/Verification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .		. . . . . . . 3-43
	LORAN-C	Initialization/Verification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .	. . . . . . . 3-47
Calibration and Test Equipment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .			. . . . . . . 3-49
	Connecting Test Equipment to the BTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .		. . . . . . . 3-49
	Test Equipment GPIB Address Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .		. . . . . . . 3-49
	Supported Test Sets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .		. . . . . . . 3-49
	Test Equipment Preparation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .		. . . . . . . 3-50
	Test Equipment Connection Charts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .		. . . . . . . 3-51
	Equipment Warm-up . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .		. . . . . . . 3-53
	Automatic Cable Calibration Set-up . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .		. . . . . . . 3-53
	Manual Cable Calibration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .		. . . . . . . 3-53
	Set-up for TX Calibration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .		. . . . . . . 3-55
	Set-up for Optimization/ATP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .		. . . . . . . 3-59
	TX ATP Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .		. . . . . . . 3-65
Loss/Gain Offset .		. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .	. . . . . . . 3-67
	Background . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .		. . . . . . . 3-67
	Purpose . .	. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .	. . . . . . . 3-67
	GPIB Addresses . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .		. . . . . . . 3-67
	Selecting Test Equipment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .		. . . . . . . 3-67
	Manually Selecting Test Equipment in a Serial Connection Tab . . . . . . . . . . . . . . . . . . . . . .		. . . . . . . 3-68
	Automatically Selecting Test Equipment in a Serial Connection Tab . . . . . . . . . . . . . . . . . .		. . . . . . . 3-69
	Calibrating Test Equipment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .		. . . . . . . 3-69
	Calibrating Cables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .		. . . . . . . 3-70
	Calibrating Cables with a CDMA Analyzer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .		. . . . . . . 3-70
	Calibrating TX Cables Using a Signal Generator and Spectrum Analyzer . . . . . . . . . . . . .		. . . . . . . 3-71
	Calibrating RX Cables Using a Signal Generator and Spectrum Analyzer . . . . . . . . . . . . .		. . . . . . . 3-73
	Setting Cable Loss Values . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .		. . . . . . . 3-73
	Setting Coupler Loss Value . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .		. . . . . . . 3-74
Adjusting for loss . .		. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .	. . . . . . . 3-75
	Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .		. . . . . . . 3-75
	RF Path Bay Level Offset Calibration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .		. . . . . . . 3-75
	When to Calibrate BLOs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .		. . . . . . . 3-75
	TX Path Calibration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .		. . . . . . . 3-75
	BLO Calibration Data File . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .		. . . . . . . 3-76
	Test Equipment Setup: RF Path Calibration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .		. . . . . . . 3-78
	Transmit (TX) Path Calibration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .		. . . . . . . 3-78
	Download BLO Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .		. . . . . . . 3-81
	Calibration Audit Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .		. . . . . . . 3-82
	Transmit (TX) Path Audit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .		. . . . . . . 3-82
	TX Audit Test . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .		. . . . . . . 3-82
	All Cal/Audit Test . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .		. . . . . . . 3-84
	Create CAL File . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .		. . . . . . . 3-85
	RFDS Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .		. . . . . . . 3-86
	RFDS Parameters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .		. . . . . . . 3-86
	Checking and Setting RFDS Parameters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .		. . . . . . . 3-87

	iv	SCt4812ET Optimization/ATP Manual Software Release R16.1.x.x	Aug 2002

PRELIMINARY

	68P09255A57-2		Table of Contents

	RFDS TSU NAM Programming . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .		. . . . . . . . . . . . .	3-89
	Explanation of Parameters Used When Programming the TSU NAM . . . . . . . . . . .		. . . . . . . . . . . . .	3-89
	Valid NAM Ranges . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .		. . . . . . . . . . . .	3-90
	Set Antenna Map Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .		. . . . . . . . . . . .	3-90
	Set RFDS Configuration Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .		. . . . . . . . . . . .	3-91
	RFDS Calibration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .		. . . . . . . . . . . .	3-92
	RFDS Calibration Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .		. . . . . . . . . . . .	3-93
	Program TSU NAM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .		. . . . . . . . . . . .	3-94
Alarms . . . . . . . . . . . . .		. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .	. . . . . . . . . . . .	3-96
	Alarm Reporting Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .		. . . . . . . . . . . .	3-96
	Heat Exchanger Alarm Test . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .		. . . . . . . . . . . .	3-96
	Door Alarm . .	. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .	. . . . . . . . . . . .	3-97
	AC Fail Alarm .	. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .	. . . . . . . . . . . .	3-97
	Minor Alarm . .	. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .	. . . . . . . . . . . .	3-97
	Rectifier Alarms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .		. . . . . . . . . . . .	3-98
	Single Rectifier Failure (Three Rectifier System) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .		. . . . . . . . . . . .	3-98
	Multiple Rectifier Failure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .		. . . . . . . . . . . .	3-98
	Single Rectifier Failure
	(Six Rectifier System) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .		. . . . . . . . . . . .	3-99
	Multiple Rectifier Failure (Six Rectifier System) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .		. . . . . . . . . . . .	3-99
	Battery Over Temperature Alarm (Optional) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .		. . . . . . . . . . . .	3-100
	Rectifier Over Temperature Alarm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .		. . . . . . . . . . . .	3-102
Before Leaving the site . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .			. . . . . . . . . . . .	3-103
Chapter 4 Automated Test Procedures (ATP) . . . . . . . . . . . . . . . . . . . . . . . .			. . . . . . . .	4-1
ATP Tests . . . . . . . . . . .		. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .	. . . . . . . . . . . .	4-2
	Introduction . .	. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .	. . . . . . . . . . . .	4-2
	Reduced ATP .	. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .	. . . . . . . . . . . .	4-2
	ATP Test Prerequisites . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .		. . . . . . . . . . . .	4-3
	TX/RX OUT Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .		. . . . . . . . . . . .	4-4
	ATP Test Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .		. . . . . . . . . . . .	4-4
	CDMA 2000 Testing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .		. . . . . . . . . . . .	4-4
	Individual Acceptance Tests . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .		. . . . . . . . . . . .	4-5
	ATP Test Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .		. . . . . . . . . . . .	4-6
	Background: Tx Mask Test . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .		. . . . . . . . . . . .	4-6
	Background: Rho Test . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .		. . . . . . . . . . . .	4-8
	Background: Pilot Offset Acceptance Test . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .		. . . . . . . . . . . .	4-8
	Background: Code Domain Power Test . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .		. . . . . . . . . . . .	4-9
	Background: FER Test . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .		. . . . . . . . . . . .	4-10
	Background . .	. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .	. . . . . . . . . . . .	4-11
	ATP Report . . .	. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .	. . . . . . . . . . . .	4-11
Chapter 5 Prepare to Leave the Site . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .			. . . . . . . .	5-1
Initializing Active Service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .			. . . . . . . . . . . .	5-2
	External Test Equipment Removal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .		. . . . . . . . . . . .	5-2
	Reset All Devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .		. . . . . . . . . . . .	5-2
	Updating BTS CAL LMF Files in the CBSC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .		. . . . . . . . . . . .	5-2
	BTS Site Span Configuration Verification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .		. . . . . . . . . . . .	5-3
	Set BTS Site Span Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .		. . . . . . . . . . . .	5-5
	Re-connect BTS T1 Spans and Integrated Frame Modem . . . . . . . . . . . . . . . . . . . . .		. . . . . . . . . . . .	5-7
	LMF Removal	. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .	. . . . . . . . . . . .	5-7
	Reestablish OMC-R Control/ Verifying T1/E1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .		. . . . . . . . . . . .	5-7
Chapter 6 Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .			. . . . . . . .	6-1
Troubleshooting . . . . . .		. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .	. . . . . . . . . . . .	6-2

	Aug 2002	SCt4812ET Optimization/ATP Manual Software Release R16.1.x.x		v

PRELIMINARY

Table of Contents			68P09255A57-2

	Overview .	. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .	. . . . . . . . 6-2
	Cannot Log into Cell-Site . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .		. . . . . . . 6-2
	Cannot Communicate to Power Meter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .		. . . . . . . 6-3
	Cannot Communicate to Communications Analyzer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .		. . . . . . . 6-3
	Code Download Failure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .		. . . . . . . 6-3
	Cannot Download DATA to Any Device (Card) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .		. . . . . . . 6-4
	Cannot ENABLE Device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .		. . . . . . . 6-4
	LPA Errors	. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .	. . . . . . . 6-5
	Bay Level Offset Calibration Failure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .		. . . . . . . 6-5
	Calibration Audit Failure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .		. . . . . . . 6-6
	Forward link problem . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .		. . . . . . . 6-6
	Cannot Perform Txmask Measurement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .		. . . . . . . 6-7
	Cannot Perform Rho or Pilot Time Offset Measurement . . . . . . . . . . . . . . . . . . . . . . . . . . . .		. . . . . . . 6-7
	Cannot Perform Code Domain Power and Noise Floor Measurement . . . . . . . . . . . . . . . . .		. . . . . . . 6-7
	Cannot Perform Carrier Measurement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .		. . . . . . . 6-8
	Multi-FER	Test Failure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .	. . . . . . . 6-8
	Problem Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .		. . . . . . . 6-8
	Intermittent 19.6608 MHz Reference Clock/GPS Receiver Operation . . . . . . . . . . . . . . . . .		. . . . . . . 6-8
	No GPS Reference Source . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .		. . . . . . . 6-8
	Checksum Failure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .		. . . . . . . 6-9
	GPS Bad RX Message Type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .		. . . . . . . 6-9
	CSM Reference Source Configuration Error . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .		. . . . . . . 6-9
	Takes Too Long for CSM to Come INS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .		. . . . . . . 6-9
	C-CCP Backplane . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .		. . . . . . . 6-10
	Connector Functionality . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .		. . . . . . . 6-10
	C-CCP Backplane Troubleshooting Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .		. . . . . . . 6-11
	Digital Control Problems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .		. . . . . . . 6-11
	DC Power Problems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .		. . . . . . . 6-14
	RFDS . . .	. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .	. . . . . . . 6-15
	All tests fail . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .		. . . . . . . 6-15
	All RX and TX paths fail . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .		. . . . . . . 6-16
	All tests fail on a single antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .		. . . . . . . 6-16
	Module Status Indicators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .		. . . . . . . 6-16
	LED Status Combs All Modules (except GLI3, CSM, BBX2, MCC8/24E) . . . . . . . . . . . . . .		. . . . . . . 6-17
	DC/DC Converter LED Status Combinations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .		. . . . . . . 6-17
	CSM LED Status Combinations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .		. . . . . . . 6-17
	GLI3 LED Status Combinations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .		. . . . . . . 6-19
	GLI3 Pushbuttons and Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .		. . . . . . . 6-20
	BBX LED Status Combinations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .		. . . . . . . 6-21
	MCC LED Status Combinations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .		. . . . . . . 6-21
	LPA Shelf LED Status Combinations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .		. . . . . . . 6-22
	Span Problems
	(No Control Link) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .		. . . . . . . 6-22
Appendix A System Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .			. . . A-1
Site Operation Verification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .			. . . . . . . A-2
	Verification of Test Equipment Used . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .		. . . . . . . A-2
	Site Checklist . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .		. . . . . . . A-3
	Preliminary Operations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .		. . . . . . . A-4
	Pre-Power and Initial Power Tests . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .		. . . . . . . A-5
	General Optimization Checklist . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .		. . . . . . . A-6
	GPS Receiver Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .		. . . . . . . A-7
	LFR Receiver Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .		. . . . . . . A-8
	LPA IM Reduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .		. . . . . . . A-9

	vi	SCt4812ET Optimization/ATP Manual Software Release R16.1.x.x	Aug 2002

PRELIMINARY

	68P09255A57-2		Table of Contents

	TX Bay Level Offset / Power Output Verification for 3-Sector Configurations . . . .		. . . . . . . . . . . . .	A-10
	TX Bay Level Offset / Power Output Verification for 6-Sector Configurations . . . . .		. . . . . . . . . . . .	A-15
	TX Antenna VSWR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .		. . . . . . . . . . . .	A-17
	RX Antenna VSWR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .		. . . . . . . . . . . .	A-17
	Alarm Verification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .		. . . . . . . . . . . .	A-18
	C-CCP Shelf	. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .	. . . . . . . . . . . .	A-19
	LPAs . . . . . . . .	. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .	. . . . . . . . . . . .	A-20
Appendix B ATP Matrix Table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .			. . . . . . . .	B-1
Re-optimization . . . . . .		. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .	. . . . . . . . . . . .	B-2
	Usage & Background . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .		. . . . . . . . . . . .	B-2
	Detailed Optimization/ATP Test Matrix . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .		. . . . . . . . . . . .	B-2
Appendix C BBX Gain . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .			. . . . . . . .	C-1
BBX Gain Set Point . . .		. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .	. . . . . . . . . . . .	C-2
	Usage & Background . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .		. . . . . . . . . . . .	C-2
Appendix D CDMA Operating Frequency Programming . . . . . . . . . . . . . .			. . . . . . . .	D-1
Channel Frequencies .		. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .	. . . . . . . . . . . .	D-2
	Introduction . .	. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .	. . . . . . . . . . . .	D-2
	1900 MHz PCS Channels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .		. . . . . . . . . . . .	D-2
	Calculating 1900 MHz Center Frequencies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .		. . . . . . . . . . . .	D-3
	800 MHz CDMA Channels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .		. . . . . . . . . . . .	D-4
	Calculating 800 MHz Center Frequencies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .		. . . . . . . . . . . .	D-5
Appendix E PN Offset . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .			. . . . . . . .	E-1
PN Offset . . . . . . . . . . .		. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .	. . . . . . . . . . . .	E-2
	Background . .	. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .	. . . . . . . . . . . .	E-2
	Usage . . . . . . .	. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .	. . . . . . . . . . . .	E-2
Appendix F Test Preparation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .			. . . . . . . .	F-1
Test Equipment Setup .		. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .	. . . . . . . . . . . .	F-2
	Purpose . . . . .	. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .	. . . . . . . . . . . .	F-2
	HP8921A Test Equipment Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .		. . . . . . . . . . . .	F-2
	HP8921A System Connectivity Test . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .		. . . . . . . . . . . .	F-6
	Setting HP8921A and HP83236A/B GPIB Address . . . . . . . . . . . . . . . . . . . . . . . . . . .		. . . . . . . . . . . .	F-6
	Pretest Setup for HP8921A . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .		. . . . . . . . . . . .	F-7
	Pretest Setup for HP8935 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .		. . . . . . . . . . . .	F-7
	Advantest R3465 Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .		. . . . . . . . . . . .	F-7
	R3465 GPIB Address & Clock setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .		. . . . . . . . . . . .	F-10
	Pretest Setup for Advantest R3465 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .		. . . . . . . . . . . .	F-10
	Agilent E4406A/E4432B Test Equipment Interconnection . . . . . . . . . . . . . . . . . . . . . .		. . . . . . . . . . . .	F-11
	Calibrating Test Cable Setup
	using HP PCS Interface (HP83236) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .		. . . . . . . . . . . .	F-12
	Calibrating Test Cable Setup using Advantest R3465 . . . . . . . . . . . . . . . . . . . . . . . . . .		. . . . . . . . . . . .	F-16
	Calibrating HP 437 Power Meter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .		. . . . . . . . . . . .	F-19
Calibrating Gigatronics 8541C power meter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .			. . . . . . . . . . . .	F-21
Appendix G Power Calibration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .			. . . . . . . .	G-1
Calibrating Output Power . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .			. . . . . . . . . . . .	G-2
	Power Calibration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .		. . . . . . . . . . . .	G-2
	Equipment Warm up . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .		. . . . . . . . . . . .	G-2

	Aug 2002	SCt4812ET Optimization/ATP Manual Software Release R16.1.x.x		vii

PRELIMINARY

Table of Contents		68P09255A57-2

	Power Delta Calibration Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .	. . . . . . . . G-2
	HP8921A Power Delta Calibration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .	. . . . . . . . G-3
	Advantest R3465 Power Delta Calibration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .	. . . . . . . G-4
	HP8935 Power Delta Calibration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .	. . . . . . . G-7
	Agilent E4406A Power Delta Calibration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .	. . . . . . . G-9
	In-Service Calibration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .	. . . . . . . G-11
Appendix H Cable Interconnection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .		. . . H-1
Intra-Cabinet Cabling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .		. . . . . . . H-2
	SC 4812ET Intra-Cabinet Cabling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .	. . . . . . . H-2
	C-CCP Cables and Cable Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .	. . . . . . . H-5
	RF Cabinet LPA Cables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .	. . . . . . . H-8
	LPAC Cabling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .	. . . . . . . H-12
	ETIB Cables and Cable Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .	. . . . . . . H-13
	SPAN I/O Cable Connection Diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .	. . . . . . . H-14
	DRDC/TRDC Cables and Cable Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .	. . . . . . . H-16
	MPC Functional Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .	. . . . . . . H-21
	RFDS Cabling Details . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .	. . . . . . . H-23
	50 Pair Punchblock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .	. . . . . . . H-25
	Alarm and Span Line Cable Pin/Signal Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .	. . . . . . . H-28
	RF Cabinet Parts Locator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .	. . . . . . . H-32
Appendix I GPIB Addressing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .		. . . I-1
GPIB . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .		. . . . . . . I-2
	GPIB Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .	. . . . . . . I-2
	HP437 Power Meter GPIB Address . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .	. . . . . . . I-2
	Gigatronics 8541C Power Meter GPIB Address . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .	. . . . . . . I-3
	Motorola CyberTest GPIB Address . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .	. . . . . . . I-4
	HP8935 Test Set GPIB Address . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .	. . . . . . . I-4
	Setting HP8921A and HP83236A/B GPIB Address . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .	. . . . . . . I-6
	Advantest R3465 GPIB Address . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .	. . . . . . . I-7
	RS232 GPIB Interface Box . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .	. . . . . . . I-8
	Advantest R3267 Spectrum Analyzer GPIB Address . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .	. . . . . . . I-8
	Advantest R3562 Signal Generator GPIB Address . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .	. . . . . . . I-9
	Agilent E4406A Transmitter Tester GPIB Address . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .	. . . . . . . I-11
	Agilent E4432B Signal Generator GPIB Address . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .	. . . . . . . I-12
Appendix J Downloading ROM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .		. . . J-1
Downloading ROM Code . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .		. . . . . . . J-2
	Exception Procedure - Downloading ROM Code . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .	. . . . . . . J-2
Appendix K Companion Frame Optimization . . . . . . . . . . . . . . . . . . . . . . . . . . . . .		. . . K-1

Optimizing the Companion Frame Optimizing the TX section Optimizing the RX section

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . K-2

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . K-3

Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Index-1

viii

SCt4812ET Optimization/ATP Manual Software Release R16.1.x.x

Aug 2002

PRELIMINARY

68P09255A57-2		Table of Contents

		List of Figures
Figure 1-1: Null Modem Cable Detail . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .			1-10
Figure 1-2: SC 4812ET RF Cabinet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .			1-16
Figure 1-3: RF Cabinet Internal FRUs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .			1-17
Figure 1-4: SC 4812ET C-CCP Shelf . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .			1-18
Figure 1-5: SC 4812ET Intercabinet I/O Detail (Rear View) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .			1-19
Figure 1-6: SC 4812ET		I/O Plate Diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .	1-20
Figure 1-7: RFDS Location in an SC 4812ET RF Cabinet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .			1-21
Figure 1-8: SC4812ET LPA Configuration with Combiners/Filters . . . . . . . . . . . . . . . . . . . . . . . . . . .			1-24
Figure 1-9: Power Cabinet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .			1-25
Figure 1-10: Power Cabinet with Batteries Installed (Doors Removed for Clarity) . . . . . . . . . . . . . .			1-26
Figure 2-1: Backplane DIP Switch Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .			2-3
Figure 2-2: AC Load Center Wiring . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .			2-5
Figure 2-3: Meter Alarm Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .			2-6
Figure 2-4: Temperature Compensation Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .			2-6
Figure 2-5: RF Cabinet Circuit Breaker Panel and 27Vdc Terminal Locations . . . . . . . . . . . . . . . . .			2-10
Figure 2-6: Heat Exchanger Blower Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .			2-13
Figure 2-7: Power Cabinet Circuit Breaker Assemblies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .			2-14
Figure 2-8: Power Cabinet AC Circuit Breakers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .			2-15
Figure 2-9: Power Cabinet DC Circuit Breakers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .			2-16
Figure 3-1: Back and Front View of the CSU . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .			3-6
Figure 3-2: 50 Pair Punch Block . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .			3-7
Figure 3-3: LMF Folder Structure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .			3-18
Figure 3-4: LMF Connection Detail . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .			3-19
Figure 3-5: BTS Ethernet LAN Interconnect Diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .			3-20
Figure 3-6: CDMA LMF Computer Common MMI Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . .			3-33
Figure 3-7: CSM MMI Terminal Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .			3-42
Figure 3-8: Cable Calibration Test Setup - CyberTest, Agilent 8935, Advantest R3465, and HP 8921A . . .
3-54
Figure 3-9: Cable Calibration Test Setup - Agilent E4406A/E4432B and Advantest R3267/R3562			3-55
Figure 3-10: TX Calibration Test Setup - CyberTest (IS-95A/B) and
Agilent 8935 (IS-95A/B and CDMA2000 1X) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .			3-56
Figure 3-11: TX Calibration Test Setup - Using Power Meter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .			3-57
Figure 3-12: TX Calibration Test Setup - Agilent E4406A and Advantest R3567
(IS-95A/B and CDMA2000 1X) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .			3-58
Figure 3-13: IS-95A/B Optimization/ATP Test Set-up, TRDC Shown - CyberTest and Advantest R3465 .
3-59
Figure 3-14: IS-95A/B Optimization/ATP Test Setup - HP 8921A . . . . . . . . . . . . . . . . . . . . . . . . . . .			3-60
Figure 3-15: IS-95A/B and CDMA2000 1X Optimization/ATP Test Setup With DRDCs -
Agilent Test Equipment .		. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .	3-61
Figure 3-16: IS-95A/B and CDMA2000 1X Optimization/ATP Test Setup With DRDCs -
Advantest R3267/3562 Test Equipment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .			3-62
Figure 3-17: IS-95A/B and CDMA2000 1X Optimization/ATP Test Setup With TRDCs -
Agilent Test Equipment .		. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .	3-63

Aug 2002	SCt4812ET Optimization/ATP Manual Software Release R16.1.x.x		ix

PRELIMINARY

Table of Contents			68P09255A57-2

		Figure 3-18: IS-95A/B and CDMA2000 1X Optimization/ATP Test Setup With TRDCs -
		Advantest R3267/3562 Test Equipment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .	. . . . . . . .		3-64
		Figure 3-19: Typical TX ATP Setup with Directional Coupler (shown with and without RFDS) . . .			3-65
		Figure 3-20: Typical RX ATP Setup with Directional Coupler (shown with or without RFDS) . . . . .			3-66
		Figure 3-21: Calibrating Test Equipment Setup for TX Cable Calibration
		(Using Signal Generator and Spectrum Analyzer) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .	. . . . . . . .		3-72
		Figure 3-22: Calibrating Test Equipment Setup for RX ATP Test
		(Using Signal Generator and Spectrum Analyzer) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .	. . . . . . .		3-73
		Figure 3-23: Battery Over-temperature Sensor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .	. . . . . . .		3-101
		Figure 3-24: Location of Connector J8 on the Meter Alarm Panel . . . . . . . . . . . . . . . . . . . .	. . . . . . .		3-102
		Figure 4-1: TX Mask Verification Spectrum Analyzer Display . . . . . . . . . . . . . . . . . . . . . . . .	. . . . . . .		4-7
		Figure 4-2: Code Domain Power and Noise Floor Levels . . . . . . . . . . . . . . . . . . . . . . . . . . . .	. . . . . . .		4-10
		Figure 5-1: MGLI3/SGLI3 MMI Port Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .	. . . . . . .		5-5
		Figure 6-1: CSM Front Panel Indicators & Monitor Ports . . . . . . . . . . . . . . . . . . . . . . . . . . . .	. . . . . . .		6-18
		Figure 6-2: GLI3 Front Panel Operating Indicators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .	. . . . . . .		6-20
		Figure 6-3: MCC24/8E Front Panel LEDs and LED Indicators . . . . . . . . . . . . . . . . . . . . . . .	. . . . . . .		6-22
		Figure D-1: North America PCS Frequency Spectrum (CDMA Allocation) . . . . . . . . . . . . .	. . . . . . .		D-2
		Figure D-2: North American Cellular Telephone System Frequency Spectrum (CDMA Allocation).			D-4
		Figure F-1: HP8921A/600 Cables Connection for 10 MHz Signal and GPIB without Rubidium . . .			F-3
		Figure F-2: HP8921A Cables Connection for 10 MHz Signal and GPIB with Rubidium . .	. . . . . . .		F-5
		Figure F-3: Cable Connections for Test Set without 10 MHz Rubidium Standard . . . . . . .	. . . . . . .		F-8
		Figure F-4: Cable Connections for Test Set with 10 MHz Rubidium Standard . . . . . . . . . .	. . . . . . .		F-9
		Figure F-5: Agilent 10 MHz Reference Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .	. . . . . . .		F-11
		Figure F-6: Cable CalibrationUsing HP8921 with PCS Interface . . . . . . . . . . . . . . . . . . . . . .	. . . . . . .		F-15
		Figure F-7: Cable Calibration using Advantest R3465 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .	. . . . . . .		F-18
		Figure F-8: Power Meter Detail . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .	. . . . . . .		F-19
		Figure F-9: Gigatronics 8541C Power Meter Detail . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .	. . . . . . .		F-21
		Figure G-1: Delta Calibration Setup - HP8921A to HP437B . . . . . . . . . . . . . . . . . . . . . . . . .	. . . . . . .		G-4
		Figure G-2: Delta Calibration Setup - HP8921A to HP8921A . . . . . . . . . . . . . . . . . . . . . . . .	. . . . . . .		G-4
		Figure G-3: Delta Calibration Setup - R3561L to HP437B . . . . . . . . . . . . . . . . . . . . . . . . . .	. . . . . . .		G-6
		Figure G-4: Delta Calibration Setup - R3561L to R3465 . . . . . . . . . . . . . . . . . . . . . . . . . . . .	. . . . . . .		G-7
		Figure G-5: Delta Calibration Setup - HP8935 to HP437B . . . . . . . . . . . . . . . . . . . . . . . . . .	. . . . . . .		G-8
		Figure G-6: Delta Calibration Setup - HP8935 to HP8935 . . . . . . . . . . . . . . . . . . . . . . . . . .	. . . . . . .		G-8
		Figure G-7: Delta Calibration Setup - Agilent E4432B to HP437 . . . . . . . . . . . . . . . . . . . . .	. . . . . . .		G-11
		Figure G-8: Delta Calibration Setup - Agilent E4432B to Agilent E4406A . . . . . . . . . . . . .	. . . . . . .		G-11
		Figure G-9: Optimization/ATP Test Setup Using RFDS . . . . . . . . . . . . . . . . . . . . . . . . . . . . .	. . . . . . .		G-13
		Figure G-10: IS-95 A/B/C Optimization/ATP Test Setup Using RFDS . . . . . . . . . . . . . . . . .	. . . . . . .		G-14
		Figure H-1: 4812ET RF Cabinet Internal FRU Locations . . . . . . . . . . . . . . . . . . . . . . . . . . . .	. . . . . . .		H-4
		Figure H-2: C-CCP Shelf Cable Numbers and Connectors . . . . . . . . . . . . . . . . . . . . . . . . . .	. . . . . . .		H-6
		Figure H-3: C-CCP Backplane . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .	. . . . . . .		H-7
		Figure H-4: LPAs for the SC 4812ET . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .	. . . . . . .		H-8
		Figure H-5: BTS Combiner to LPA Backplane Cables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .	. . . . . . .		H-9

	x	SCt4812ET Optimization/ATP Manual Software Release R16.1.x.x		Aug 2002

PRELIMINARY

Aug 2002

SCt4812ET Optimization/ATP Manual Software Release R16.1.x.x

PRELIMINARY

Table of Contents			68P09255A57-2

		List of Tables
		FCC Part 68 Registered Devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .	. . . . . . . . xix
		Table 1-1: CDMA LMF Test Equipment Support Table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .	. . . . . . . 1-7
		Table 1-2: Abbreviations and Acronyms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .	. . . . . . . 1-13
		Table 1-3: C-CCP Shelf/Cage Card/Module Device ID Numbers (Top Shelf) . . . . . . . . . . .	. . . . . . . 1-15
		Table 1-4: C-CCP Shelf/Cage Card/Module Device ID Numbers (Bottom Shelf) . . . . . . .	. . . . . . . 1-15
		Table 1-5: BTS Sector Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .	. . . . . . . 1-22
		Table 1-6: Sector Configurations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .	. . . . . . . 1-23
		Table 2-1: Initial Installation of Boards/Modules . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .	. . . . . . . 2-2
		Table 2-2: Initial Inspection and Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .	. . . . . . . 2-4
		Table 2-3: AC Voltage Measurements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .	. . . . . . . 2-4
		Table 2-4: Applying AC Power . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .	. . . . . . . 2-6
		Table 2-5: Power Cabinet Power Up Tests . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .	. . . . . . . 2-7
		Table 2-6: DC Power Pre-test (BTS Frame) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .	. . . . . . . 2-8
		Table 2-7: RF Cabinet Power Up . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .	. . . . . . . 2-9
		Table 2-8: Battery Charge Test (Connected Batteries) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .	. . . . . . . 2-11
		Table 2-9: Battery Discharge Test . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .	. . . . . . . 2-12
		Table 2-10: Heat Exchanger Power Up . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .	. . . . . . . 2-13
		Table 3-1: Pin-Out for 50-Pair Punchblock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .	. . . . . . . 3-8
		Table 3-2: T1/E1 Span Isolation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .	. . . . . . . 3-12
		Table 3-3: LMF Operating System Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .	. . . . . . . 3-13
		Table 3-4: Copying CBSC CDF Files to the LMF . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .	. . . . . . . 3-15
		Table 3-5: Creating a Named Hyperlink Connection for MMI Connection . . . . . . . . . . . . . .	. . . . . . . 3-17
		Table 3-6: LMF to BTS Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .	. . . . . . . 3-19
		Table 3-7: Pinging the Processors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .	. . . . . . . 3-21
		Table 3-8: Logging into the BTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .	. . . . . . . 3-21
		Table 3-9: Downloading Site Specific BTS Files . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .	. . . . . . . 3-22
		Table 3-10: Downloading and linking master-bts-cdma directory files for device loads . .	. . . . . . . 3-23
		Table 3-11: Create BTS Specific CDF File . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .	. . . . . . . 3-25
		Table 3-12: Update BTS Specific CDF File Device Load Version . . . . . . . . . . . . . . . . . . . . .	. . . . . . . 3-26
		Table 3-13: Update Antenna Mapping Files . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .	. . . . . . . 3-27
		Table 3-14: BTS GUI Login Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .	. . . . . . . 3-30
		Table 3-15: BTS CLI Login Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .	. . . . . . . 3-31
		Table 3-16: BTS GUI Logout Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .	. . . . . . . 3-31
		Table 3-17: BTS CLI Logout Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .	. . . . . . . 3-32
		Table 3-18: Establishing MMI Communications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .	. . . . . . . 3-32
		Table 3-19: Verify GLI ROM Code Loads . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .	. . . . . . . 3-35
		Table 3-20: Download and Enable MGLI and GLI Devices . . . . . . . . . . . . . . . . . . . . . . . . . .	. . . . . . . 3-35
		Table 3-21: Download RAM Code and Data to Non-GLI Devices . . . . . . . . . . . . . . . . . . . .	. . . . . . . 3-36
		Table 3-22: Select CSM Clock Source . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .	. . . . . . . 3-38

	xii	SCt4812ET Optimization/ATP Manual Software Release R16.1.x.x	Aug 2002

PRELIMINARY

68P09255A57-2	Table of Contents

Table 3-23: Enable CSMs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .		3-39
Table 3-24: Enable MCCs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .		3-40
Table 3-25: Test Equipment Setup (GPS & LFR/HSO Verification) . . . . . . . . . . . . . . . . . . . . . . . . . .		3-41
Table 3-26: GPS Initialization/Verification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .		3-43
Table 3-27: LORAN-C Initialization/Verification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .		3-47
Table 3-28: IS-95A/B-only Test Equipment Interconnection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .		3-51
Table 3-29: CDMA2000 1X/IS-95A/B Test Equipment Interconnection . . . . . . . . . . . . . . . . . . . . . . .		3-52
Table 3-30: Selecting Test Equipment Manually in a Serial Connection Tab . . . . . . . . . . . . . . . . . . .		3-68
Table 3-31: Selecting Test Equipment Using Auto-Detect . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .		3-69
Table 3-32: Test Equipment Calibration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .		3-69
Table 3-33: Cable Calibration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .		3-71
Table 3-34: Calibrating TX Cables Using Signal Generator and Spectrum Analyzer . . . . . . . . . . . .		3-71
Table 3-35: Calibrating RX Cables Using a Signal Generator and Spectrum Analyzer . . . . . . . . . .		3-73
Table 3-36: Setting Cable Loss Values . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .		3-74
Table 3-37: Setting Coupler Loss Values . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .		3-74
Table 3-38: BLO BTS.cal file Array Branch Assignments . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .		3-76
Table 3-39: BTS.cal File Array (Per Sector) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .		3-77
Table 3-40: Test Equipment Setup (RF Path Calibration) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .		3-78
Table 3-41: BTS TX Path Calibration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .		3-80
Table 3-42: Download BLO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .		3-82
Table 3-43: BTS TX Path Audit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .		3-83
Table 3-44: All Cal/Audit Test . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .		3-85
Table 3-45: Create CAL File . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .		3-86
Table 3-46: RFDS Parameter Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .		3-87
Table 3-47: Definition of Parameters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .		3-89
Table 3-48: Valid NAM Field Ranges . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .		3-90
Table 3-49: Set Antenna Map Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .		3-91
Table 3-50: Set RFDS Configuration Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .		3-91
Table 3-51: RFDS TSIC Calibration Channel Frequencies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .		3-93
Table 3-52: RFDS Calibration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .		3-94
Table 3-53: Program NAM Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .		3-95
Table 3-54: Heat Exchanger Alarm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .		3-97
Table 3-55: Door Alarm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .		3-97
Table 3-56: AC Fail Alarm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .		3-97
Table 3-57: Minor Alarm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .		3-98
Table 3-58: Single Rectifier Fail or Minor Alarm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .		3-98
Table 3-59: Multiple Rectifier Failure or Major Alarm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .		3-98
Table 3-60: Single Rectifier Fail or Minor Alarm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .		3-99
Table 3-61: Multiple Rectifier Failure or Major Alarm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .		3-99
Table 3-62: Battery Over Temperature Alarm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .		3-100
Table 3-63: Rectifier Over Temperature Alarm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .		3-102

Aug 2002	SCt4812ET Optimization/ATP Manual Software Release R16.1.x.x	xiii

PRELIMINARY

Table of Contents			68P09255A57-2

		Table 3-64: Check Before Leaving the Site . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .	. . . . . . . 3-103
		Table 4-1: ATP Test Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .	. . . . . . . 4-6
		Table 4-2: Generate an ATP Report . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .	. . . . . . . 4-11
		Table 5-1: External Test Equipment Removal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .	. . . . . . . 5-2
		Table 5-2: Copy Files from LMF to a Diskette . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .	. . . . . . . 5-2
		Table 5-3: Copy CAL Files From Diskette to the CBSC . . . . . . . . . . . . . . . . . . . . . . . . . . . . .	. . . . . . . 5-3
		Table 5-4: BTS Span Parameter Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .	. . . . . . . 5-4
		Table 5-5: Set BTS Span Parameter Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .	. . . . . . . 5-5
		Table 5-6: T1/E1 Span/IFM Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .	. . . . . . . 5-7
		Table 5-7: Terminate the LMF Session and Remove the LMF . . . . . . . . . . . . . . . . . . . . . . . .	. . . . . . . 5-7
		Table 6-1: Login Failure Troubleshooting Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .	. . . . . . . 6-2
		Table 6-2: Troubleshooting a Power Meter Communication Failure . . . . . . . . . . . . . . . . . .	. . . . . . . 6-3
		Table 6-3: Troubleshooting a Communications Analyzer Communication Failure . . . . . . .	. . . . . . . 6-3
		Table 6-4: Troubleshooting Code Download Failure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .	. . . . . . . 6-3
		Table 6-5: Troubleshooting Data Download Failure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .	. . . . . . . 6-4
		Table 6-6: Troubleshooting Device Enable (INS) Failure . . . . . . . . . . . . . . . . . . . . . . . . . . . .	. . . . . . . 6-4
		Table 6-7: LPA Errors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .	. . . . . . . 6-5
		Table 6-8: Troubleshooting BLO Calibration Failure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .	. . . . . . . 6-5
		Table 6-9: Troubleshooting Calibration Audit Failure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .	. . . . . . . 6-6
		Table 6-10: Troubleshooting Forward Link Failure (BTS Passed Reduced ATP) . . . . . . . .	. . . . . . . 6-6
		Table 6-11: Troubleshooting TX Mask Measurement Failure . . . . . . . . . . . . . . . . . . . . . . . . .	. . . . . . . 6-7
		Table 6-12: Troubleshooting Rho and Pilot Time Offset Measurement Failure . . . . . . . . . .	. . . . . . . 6-7
		Table 6-13: Troubleshooting Code Domain Power and Noise Floor Measurement Failure	. . . . . . . 6-7
		Table 6-14: Troubleshooting Carrier Measurement Failure . . . . . . . . . . . . . . . . . . . . . . . . . .	. . . . . . . 6-8
		Table 6-15: Troubleshooting Multi-FER Failure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .	. . . . . . . 6-8
		Table 6-16: No GLI3 Control via LMF (all GLI3s) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .	. . . . . . . 6-11
		Table 6-17: No GLI3 Control through Span Line Connection (Both GLI3s) . . . . . . . . . . . . .	. . . . . . . 6-12
		Table 6-18: MGLI3 Control Good - No Control over Co-located GLI3 . . . . . . . . . . . . . . . .	. . . . . . . 6-12
		Table 6-19: MGLI3 Control Good - No Control over AMR . . . . . . . . . . . . . . . . . . . . . . . . . . .	. . . . . . . 6-12
		Table 6-20: MGLI3 Control Good - No Control over Co-located GLI3s . . . . . . . . . . . . . . .	. . . . . . . 6-12
		Table 6-21: BBX Control Good - No (or Missing) Span Line Traffic . . . . . . . . . . . . . . . . . . .	. . . . . . . 6-13
		Table 6-22: No MCC-1X/MCC24E/MCC8E Channel Elements . . . . . . . . . . . . . . . . . . . . . .	. . . . . . . 6-13
		Table 6-23: No DC Input Voltage to Power Supply Module . . . . . . . . . . . . . . . . . . . . . . . . . .	. . . . . . . 6-14
		Table 6-24: No DC Input Voltage to any C-CCP Shelf Module . . . . . . . . . . . . . . . . . . . . . . .	. . . . . . . 6-14
		Table 6-25: No DC Input Voltage to any C-CCP Shelf Module . . . . . . . . . . . . . . . . . . . . . . .	. . . . . . . 6-15
		Table 6-26: RFDS Fault Isolation - All tests fail . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .	. . . . . . . 6-15
		Table 6-27: RFDS Fault Isolation - All RX and TX paths fail . . . . . . . . . . . . . . . . . . . . . . . . .	. . . . . . . 6-16
		Table 6-28: RFDS Fault Isolation - All tests fail on single antenna path . . . . . . . . . . . . . . .	. . . . . . . 6-16
		Table 6-29: Troubleshooting Control Link Failure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .	. . . . . . . 6-23
		Table A-1: Verification of Test Equipment Used . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .	. . . . . . . A-2
		Table A-2: Site Checklist . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .	. . . . . . . A-3

	xiv	SCt4812ET Optimization/ATP Manual Software Release R16.1.x.x	Aug 2002

PRELIMINARY

68P09255A57-2		Table of Contents

Table A-3: Preliminary Operations . . . . . . . . . . . . . . . .		. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .	A-4
Table A3a: Pre-power Checklist . . . . . . . . . . . . . . . . . . .		. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .	A-5
Table A3b: Pre-power Checklist . . . . . . . . . . . . . . . . . . .		. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .	A-6
Table A-4: GPS Receiver Operation . . . . . . . . . . . . . . . .		. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .	A-7
Table A-5: LFR Receiver Operation . . . . . . . . . . . . . . . .		. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .	A-8
Table A-6: LPA IM Reduction . . . . . . . . . . . . . . . . . . . . . .		. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .	A-9
Table A-7: TX BLO Calibration (3-Sector: 1-Carrier,		2-Carrier and 4-Carrier Non-adjacent Channels) . .
A-10
Table A-8: TX Bay Level Offset Calibration (3-Sector: 2-Carrier Adjacent Channels) . . . . . . . . . .			A-11
Table A-9: TX Bay Level Offset Calibration (3-Sector: 3 or 4-Carrier Adjacent Channels) . . . . . .			A-12
Table A-10: TX BLO Calibration (6-Sector: 1-Carrier, 2-Carrier Non-adjacent Channels) . . . . . .			A-15
Table A-11: TX Antenna VSWR . . . . . . . . . . . . . . . . . . .		. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .	A-17
Table A-12: RX Antenna VSWR . . . . . . . . . . . . . . . . . . .		. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .	A-17
Table A-13: CDI Alarm Input Verification . . . . . . . . . . . .		. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .	A-18
Table B-1: SC 4812ET BTS Optimization and ATP Test Matrix . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .			B-3
Table C-1: BBX Gain Set Point vs. Actual BTS Output (in dBm) . . . . . . . . . . . . . . . . . . . . . . . . . . . .			C-2
Table D-1: 1900 MHz TX and RX Frequency vs. Channel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .			D-3
Table D-2: 800 MHz TX and RX Frequency vs. Channel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .			D-5
Table E-1: PnMaskI and PnMaskQ Values for PilotPn		. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .	E-3
Table F-1: HP8921A/600 Communications Test Set Rear Panel Connections Without Rubidium .			F-2
Table F-2: HP8921A/600 Communications Test Set Rear Panel Connections With Rubidium . . .			F-4
Table F-3: System Connectivity . . . . . . . . . . . . . . . . . . .		. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .	F-6
Table F-4: Setting HP8921A GPIB Address . . . . . . . . .		. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .	F-6
Table F-5: Pretest Setup for HP8921A . . . . . . . . . . . . .		. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .	F-7
Table F-6: Pretest Setup for HP8935 . . . . . . . . . . . . . . .		. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .	F-7
Table F-7: Advantest R3465 GPIB Address and Clock Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .			F-10
Table F-8: Pretest Setup for Advantest R3465 . . . . . . .		. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .	F-10
Table F-9: Calibrating Test Cable Setup (using the HP PCS Interface) . . . . . . . . . . . . . . . . . . . . . . .			F-12
Table F-10: Procedure for Calibrating Test Cable Setup Using Advantest R3465 . . . . . . . . . . . . . .			F-16
Table F-11: Power Meter Calibration Procedure . . . . .		. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .	F-19
Table F-12: Calibrate Gigatronics 8541C Power Meter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .			F-21
Table G-1: HP8921A Power Delta Calibration Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .			G-3
Table G-2: Advantest Power Delta Calibration Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .			G-5
Table G-3: HP8935 Power Delta Calibration Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .			G-7
Table G-4: Agilent E4406A Power Delta Calibration Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . .			G-9
Table G-5: In-Service Calibration . . . . . . . . . . . . . . . . . .		. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .	G-15
Table H-1: SC4812ET RF CABINET INTER-CONNECT CABLES . . . . . . . . . . . . . . . . . . . . . . . . . .			H-2
Table H-2: SC 4812ET Series 3-Sector Duplexed Directional Coupler to RFDS Cabling Table . . .			H-23
Table H-3: SC 4812ET Series 6-Sector Duplexed Directional Coupler to RFDS Cabling Table . . .			H-24
Table H-4: Pin-Out for 50-Pair Punchblock . . . . . . . . .		. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .	H-28
Table I-1: Verify and/or Change HP437 Power Meter GPIB Address . . . . . . . . . . . . . . . . . . . . . . . . .			I-2

Aug 2002	SCt4812ET Optimization/ATP Manual Software Release R16.1.x.x		xv

PRELIMINARY

Table of Contents		68P09255A57-2

	Table I-2: Verify and/or Change Gigatronics 8541C Power Meter GPIB Address . . . . . .	. . . . . . . . I-3
	Table I-3: Verify and/or Change Motorola CyberTest GPIB Address . . . . . . . . . . . . . . . . . .	. . . . . . . I-4
	Table I-4: Verify and/or Change HP8935 GPIB Address . . . . . . . . . . . . . . . . . . . . . . . . . . . .	. . . . . . . I-4
	Table I-5: Verify and/or Change HP8921A and HP83236A GPIB Addresses . . . . . . . . . . .	. . . . . . . I-6
	Table I-6: Verify and/or Change Advantest R3465 GPIB Address . . . . . . . . . . . . . . . . . . . .	. . . . . . . I-7
	Table I-7: Verify and Change Advantest R3267 GPIB Address . . . . . . . . . . . . . . . . . . . . . . .	. . . . . . . I-9
	Table I-8: Verify and Change Agilent E4406A GPIB Address . . . . . . . . . . . . . . . . . . . . . . . .	. . . . . . . I-11
	Table I-9: Verify and Change Agilent E4432B GPIB Address . . . . . . . . . . . . . . . . . . . . . . . .	. . . . . . . I-12
	Table J-1: Download ROM and RAM Code to Devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .	. . . . . . . J-3
	Table K-1: Optimizing the TX section of the Companion Frame . . . . . . . . . . . . . . . . . . . . . .	. . . . . . . K-2
	Table K-2: Optimizing the RX (Main) section of the Companion Frame . . . . . . . . . . . . . . . .	. . . . . . . K-3
	Table K-3: Optimizing the RX (Diversity) on a Single Frame . . . . . . . . . . . . . . . . . . . . . . . . .	. . . . . . . K-3
	Table K-4: Optimizing the RX (Diversity) on a Two Frame Companion Site . . . . . . . . . . . .	. . . . . . . K-3

xvi

SCt4812ET Optimization/ATP Manual Software Release R16.1.x.x

Aug 2002

PRELIMINARY

FCC Requirements

Content

This section presents Federal Communications Commission (FCC)

Rules Parts 15 and 68 requirements and compliance information for the

SCt4812T/ET/ET Lite series Radio Frequency Base Transceiver

Stations.

FCC Part 15 Requirements

Part 15.19a(3) - INFORMATION TO USER

NOTE	This device complies with Part 15 of the FCC Rules. Operation
	is subject to the following two conditions:
	1.	This device may not cause harmful interference, and
	2.	This device must accept any interference received, including
		interference that may cause undesired operation.

Part 15.21 - INFORMATION TO USER

CAUTION Changes or modifications not expressly approved by Motorola could void your authority to operate the equipment.

	15.105(b) - INFORMATION TO USER

NOTE	This equipment has been tested and found to comply with the
	limits for a Class B digital device, pursuant to Part 15 of the
	FCC Rules. These limits are designed to provide reasonable
	protection against harmful interference in a residential
	installation. This equipment generates, uses and can radiate radio
	frequency energy and, if not installed and used in accordance
	with the instructions, may cause harmful interference to radio
	communications. However, there is no guarantee that
	interference will not occur in a particular installation. If this
	equipment does cause harmful interference to radio or television
	reception, which can be determined by turning the equipment
	OFF and ON, the user is encouraged to try to correct the
	interference by one or more of the following measures:
	S	Reorient or relocate the receiving antenna.
	S	Increase the separation between the equipment and receiver.
	S	Connect the equipment into an outlet on a circuit different
		from that to which the receiver is connected.
	S	Consult the dealer or an experienced radio/TV technician for
		help.

Aug 2002

SCt4812ET Optimization/ATP Manual Software Release R16.1.x.x

xvii

PRELIMINARY

FCC Requirements		68P09255A57-2

FCC Part 68 Requirements

This equipment complies with Part 68 of the Federal Communications Commission (FCC) Rules. A label on the GLI3 board, easily visible with the board removed, contains the FCC Registration Number for this equipment. If requested, this information must be provided to the telephone company.

FCC Part 68 Registered Devices

Device	FCC Part 68 ID

Group Line Interface (GLI3) See Note	US: IHEXDNANGLI3-1X

Cisco Model 1900-27 Router	US: 5B1DDNDN0006

ADC KENTROX Model 537	US: F81USA-31217-DE-N

NOTE

The BTS equipment is always equipped with the GLI3,

< US: IHEXDNANGLI3-1X>, and may be used in conjunction with one or both of the listed registered CSU devices, or another registered CSU device not listed above.

The telephone company may make changes in its facilities, equipment, operations, or procedures that could affect the operation of your T1. If this happens, the telephone company will provide advance notice so that you can modify your equipment as required to maintain uninterrupted service.

If this equipment causes harm to the telephone network, the telephone company will notify you in advance that temporary discontinuance of service may be required. If advance notice is not practical, the telephone company will notify you as soon as possible. Also, you will be advised of your right to file a complaint with the FCC if you believe it is necessary.

If you experience trouble operating this equipment with the T1, please contact:

Global Customer Network Resolution Center (CNRC)

1501 W. Shure Drive, 3436N

Arlington Heights, Illinois 60004

Phone Number: (847) 632-5390

for repair and/or warranty information. You should not attempt to repair this equipment yourself. This equipment contains no customer or user-serviceable parts.

Changes or modifications not expressly approved by Motorola could void your authority to operate this equipment.

xviii

SCt4812ET Optimization/ATP Manual Software Release R16.1.x.x

Aug 2002

PRELIMINARY

68P09255A57-2	Foreword

Foreword

Scope of manual

This manual is intended for use by cellular telephone system craftspersons in the day-to-day operation of Motorola cellular system equipment and ancillary devices.

This manual is not intended to replace the system and equipment training offered by Motorola, although it can be used to supplement or enhance the knowledge gained through such training.

Obtaining Manuals

To view, download, order manuals (original or revised), visit the Motorola Lifecycles Customer web page at http://services.motorola.com, or contact your Motorola account representative.

If Motorola changes the content of a manual after the original printing date, Motorola publishes a new version with the same part number but a different revision character.

Text conventions

The following special paragraphs are used in this manual to point out information that must be read. This information may be set-off from the surrounding text, but is always preceded by a bold title in capital letters. The three categories of these special paragraphs are:

NOTE	Presents additional, helpful, non-critical information that you can
	use. Bold-text notes indicate information to help you avoid
	an undesirable situation or provides additional information
	to help you understand a topic or concept.


CAUTION	Presents information to identify a situation in which equipment
	damage could occur, thus avoiding damage to equipment.


WARNING	Presents information to warn you of a potentially hazardous
	situation in which there is a possibility of personal injury.

The following typographical conventions are used for the presentation of software information:

SIn text, sans serif BOLDFACE CAPITAL characters (a type style without angular strokes: i.e., SERIF versus SANS SERIF) are used to name a command.

SIn text, typewriter style characters represent prompts and the system output as displayed on an operator terminal or printer.

SIn command definitions, sans serif boldface characters represent those parts of the command string that must be entered exactly as shown and typewriter style characters represent command output responses as displayed on an operator terminal or printer.

SIn the command format of the command definition, typewriter style characters represent the command parameters.

Aug 2002

SCt4812ET Optimization/ATP Manual Software Release R16.1.x.x

xix

PRELIMINARY

Foreword		68P09255A57-2

Reporting manual errors

To report a documentation error, call the CNRC (Customer Network

Resolution Center) and provide the following information to enable

CNRC to open an MR (Modification Request):

-the document type

-the manual title, part number, and revision character

-the page number(s) with the error

-a detailed description of the error and if possible the proposed solution Motorola appreciates feedback from the users of our manuals.

Send questions and comments regarding user documentation to the email address below:

cdma.documentation@motorola.com

Motorola appreciates feedback from the users of our information.

Manual banner definitions

A banner (oversized text on the bottom of the page, for example, PRELIMINARY) indicates that some information contained in the manual is not yet approved for general customer use.

24-hour support service

If you have problems regarding the operation of your equipment, please contact the Customer Network Resolution Center for immediate assistance. The 24 hour telephone numbers are:

NA CNRC	+1-800-433-5202
EMEA CNRC	+44- (0) 1793-565444
ASPAC CNRC	+86-10-88417733
Japan & Korea CNRC	+81-3-5463-3550
LAC CNRC	+51-1-212-4020

For further CNRC contact information, contact your Motorola account representative.

SCt4812ET Optimization/ATP Manual Software Release R16.1.x.x

Aug 2002

PRELIMINARY

68P09255A57-2 General Safety

General Safety

Remember! . . . Safety depends on you!!

The following general safety precautions must be observed during all phases of operation, service, and repair of the equipment described in this manual. Failure to comply with these precautions or with specific warnings elsewhere in this manual violates safety standards of design, manufacture, and intended use of the equipment. Motorola, Inc. assumes no liability for the customer’s failure to comply with these requirements. The safety precautions listed below represent warnings of certain dangers of which we are aware. You, as the user of this product, should follow these warnings and all other safety precautions necessary for the safe operation of the equipment in your operating environment.

Ground the instrument

	To minimize shock hazard, the equipment chassis and enclosure must be
	connected to an electrical ground. If the equipment is supplied with a
	three-conductor ac power cable, the power cable must be either plugged
	into an approved three-contact electrical outlet or used with a
	three-contact to two-contact adapter. The three-contact to two-contact
	adapter must have the grounding wire (green) firmly connected to an
	electrical ground (safety ground) at the power outlet. The power jack and
	mating plug of the power cable must meet International Electrotechnical
	Commission (IEC) safety standards.

NOTE	Refer to Grounding Guideline for Cellular Radio Installations -
	68P81150E62.

Do not operate in an explosive atmosphere

Do not operate the equipment in the presence of flammable gases or fumes. Operation of any electrical equipment in such an environment constitutes a definite safety hazard.

Keep away from live circuits

Operating personnel must:

S not remove equipment covers. Only Factory Authorized Service Personnel or other qualified maintenance personnel may remove equipment covers for internal subassembly, or component replacement, or any internal adjustment.

S not replace components with power cable connected. Under certain conditions, dangerous voltages may exist even with the power cable removed.

S always disconnect power and discharge circuits before touching them.

Do not service or adjust alone

Do not attempt internal service or adjustment, unless another person, capable of rendering first aid and resuscitation, is present.

Aug 2002

SCt4812ET Optimization/ATP Manual Software Release R16.1.x.x

xxi

PRELIMINARY

General Safety		68P09255A57-2

Use caution when exposing or handling the CRT

Breakage of the Cathode-Ray Tube (CRT) causes a high-velocity scattering of glass fragments (implosion). To prevent CRT implosion, avoid rough handling or jarring of the equipment. The CRT should be handled only by qualified maintenance personnel, using approved safety mask and gloves.

Do not substitute parts or modify equipment

Because of the danger of introducing additional hazards, do not install substitute parts or perform any unauthorized modification of equipment. Contact Motorola Warranty and Repair for service and repair to ensure that safety features are maintained.

Dangerous procedure warnings

Warnings, such as the example below, precede potentially dangerous procedures throughout this manual. Instructions contained in the warnings must be followed. You should also employ all other safety precautions that you deem necessary for the operation of the equipment in your operating environment.

WARNING Dangerous voltages, capable of causing death, are present in this equipment. Use extreme caution when handling, testing, and adjusting.

xxii

SCt4812ET Optimization/ATP Manual Software Release R16.1.x.x

Aug 2002

PRELIMINARY

68P09255A57-2		Revision History

Revision History
Manual Number
		68P09255A57- 2
Manual Title
		SCt4812ET Optimization/ATP Manual Software Release R16.1.x.x
Version Information
		The following table lists the manual version, date of version, and
		remarks on the version. Revision bars printed in page margins (as shown
		to the side) identify material which has changed from the previous
		release of this publication.

Version	Date of Issue	Remarks
Level


1	Mar 2002	Preliminary manual submitted for engineering markup

2	Jul 2002	LMF software updates. Preliminary manual submitted for DV&V
		evaluation

Aug 2002

SCt4812ET Optimization/ATP Manual Software Release R16.1.x.x

xxiii

PRELIMINARY

Chapter 1

Introduction

Aug 2002

SCt4812ET Optimization/ATP Manual Software Release R16.1.x.x

1-1

PRELIMINARY

		Introduction	68P09255A57-2
		Introduction	68P09255A57-2

1 Introduction

Scope of This Document

This document provides information pertaining to the optimization and audit tests of Motorola SC 4812ET Base Transceiver Subsystem (BTS) equipment frames equipped with trunked high-power Linear Power Amplifiers (LPAs) and their associated internal and external interfaces.

Also covered is software release 2.16.1.X and can support the following versions of SC 4812ET BTS sites:

-1X Packet Backhaul BTS

-1X Circuit BTS

-1X Packet backhaul BTS

The 1X packet BTS has a packet backhaul network interface which provided via a pair of external routers together with a GLI upgrade (GLI3) that can handle voice (IS-95A/B, 1X) and data (IS-95B, 1X).

This BTS equipment is configured with all 1X cards (BBX-1X andMCC1X) or a mix of 1X cards and non-1X cards (BBX2 and MCC8E/24E). This configuration is compliant with all applicable cdma2000 1X specifications. It provides the forward link and reverse link RF functions to support 2G features and 3G-1X features (i.e., high capacity voice & high bit rate data).

The 1X circuit BTS has a split backhaul (circuit/packet pipe) network interface that can handle circuit based voice (IS-95A/B, 1X) and data (IS-95B) as well as packet based data (1X).

This document assumes the following prerequisites: The BTS frames and cabling have been installed per the BTS Hardware Installation Manual which covers the physical “bolt down” of all SC series equipment frames, and the specific cabling configurations.

Document Composition

This document covers the following major areas:

SIntroduction, consisting of preliminary background information (such as component and subassembly locations and frame layouts) to be considered by the Cell Site Field Engineer (CFE) before optimization or tests are performed.

SPreliminary Operations, consisting of cabinet power up and power down procedures.

SOptimization/calibration, covering topics of Local Maintenance Facility (LMF) connection to the BTS equipment, Global Positioning System (GPS) Verification, test equipment setup, downloading all BTS processor boards, RF path verification, Bay Level Offset (BLO) calibration and calibration audit, and Radio Frequency Diagnostic System (RFDS) calibration.

SAcceptance Test Procedures (ATPs), consisting of ATP tests executed by the LMF and used to verify all major transmit (TX) and

receive (RX) performance characteristics on all BTS equipment.

SPreparing to leave the site, presents instructions on how to properly exit customer site, ensure that all equipment is operating properly, and all work is complete according to Motorola guidelines.

1-2

SCt4812ET Optimization/ATP Manual Software Release R16.1.x.x

Aug 2002

PRELIMINARY

68P09255A57-2	Introduction
68P09255A57-2	Introduction


S	Basic troubleshooting, consisting of procedures for installation,	1
S
	calibration, transmit and receive tests, backplane problems, GPS
	failures, and module connectors.
	failures, and module connectors.
S	Appendices contain pertinent Pseudorandom Noise (PN) Offset,
	frequency programming, output power data tables, data sheets that are
	filled out manually by the CFE at the site, an optimization/ATP test
	matrix, BBX gain set point information, CDMA operating frequency
	information, PN Offset programminginformation, information on test
	equipment preparation, manual cable calibration procedures, power
	Delta calibration procedures, RF cabinet interconnect cable
	information, procedures for checking changing GPIB addresses, and
	proceduress for downloading ROM Code from the LMF.

CDMA LMF Product Description

The Code Division Multiple Access (CDMA) LMF is a graphical user interface (GUI) based LMF. This product is specifically designed to provide cellular communications field personnel the vehicle to support the following CDMA BTS operations:

SInstallation

SMaintenance

SCalibration

SOptimization

The LMF also provides Command Line Interface (CLI) capability. Activate the CLI by clicking on a shortcut icon on the desktop. The CLI cannot be launched from the GUI, only from the desktop icon.

Online Help

Task oriented online help is available in the LMF by clicking on Help from the menu bar.

Why Optimize?

Proper optimization and calibration assures:

SAccurate downlink RF power levels are transmitted from the site.

SAccurate uplink signal strength determinations are made by the site.

What Is Optimization?

Optimization compensates for the site-specific cabling and normal equipment variations. Cables that interconnect the BTS and Duplexer assemblies (if used), for example, are cut and installed at the time of the BTS frame installation at the site. Site optimization guarantees that the combined losses of the new cables and the gain/loss characteristics and built-in tolerances of each BTS frame do not accumulate, causing improper site operation.

Optimization identifies the accumulated loss (or gain) for all receive and transmit paths at the BTS site, and stores that value in a database.

SThe RX path starts at the ancillary equipment frame RFDS RX directional coupler antenna feedline port, through the RX input port

Aug 2002

SCt4812ET Optimization/ATP Manual Software Release R16.1.x.x

1-3

PRELIMINARY

	Introduction		68P09255A57-2
	Introduction		68P09255A57-2


1			on the rear of the frame, through the DDRCs, Multicoupler Preselector

			Card (MPC), and additional splitter circuitry, ending at a CDMA
			Channel Processor (C-CCP) backplane Broad Band Transceiver
			Channel Processor (C-CCP) backplane Broad Band Transceiver
			(BBX) slot in the C-CCP shelf.
		S	A transmit path starts at the BBX, through the C-CCP backplane slot,
			travels through the LPA/Combiner TX Filter and ends at the rear of
			the input/output (I/O) Panel. If the RFDS option is added, then the
			TX path continues and ends at the top of the RFDS TX directional
			coupler antenna feedline port installed in the ancillary equipment
			frame.

1-4

SCt4812ET Optimization/ATP Manual Software Release R16.1.x.x

Aug 2002

PRELIMINARY

+ 338 hidden pages

68P09255A57-2	Table of Contents

Figure H-6: Combiner to LPA Backplane/LPA Backplane To CIO Board Cables . .	. . . . . . . . . . . . .	H-10
Figure H-7: Components Located on CIO Card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .	. . . . . . . . . . . .	H-11
Figure H-8: LPAC Interface Board Connectors and Attaching Cable Numbers . . . .	. . . . . . . . . . . .	H-12
Figure H-9: ETIB I/O Connectors and Attaching Cable Numbers . . . . . . . . . . . . . . . .	. . . . . . . . . . . .	H-13
Figure H-10: SPAN I/O Cables and Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .	. . . . . . . . . . . .	H-15
Figure H-11: 3 Sector, 2 Carrier BTS Combiner DRDC/TRDC Cable Connection . .	. . . . . . . . . . . .	H-17
Figure H-12: BTS 2 to 1, 3 or 6 Sector Combiner DRDC/TRDC Cable Connection	. . . . . . . . . . . .	H-18
Figure H-13: BTS Combiner DRDC/TRDC Cable Connection . . . . . . . . . . . . . . . . . . .	. . . . . . . . . . . .	H-19
Figure H-14: SC 4812ET BTS Combiner DRDC/TRDC Cable Connection . . . . . . . .	. . . . . . . . . . . .	H-20
Figure H-15: DRDC To C-CCP Cage MPC Boards Cable Connections . . . . . . . . . .	. . . . . . . . . . . .	H-22
Figure H-16: RFDS Component Identification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .	. . . . . . . . . . . .	H-23
Figure H-17: SC 4812ET BTS Combiner DRDC/TRDC RFDS Cable Connection . .	. . . . . . . . . . . .	H-25
Figure H-18: 50 Pair Punchblock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .	. . . . . . . . . . . .	H-27
Figure H-19: SC 4812ET RF Cabinet Parts Locator . . . . . . . . . . . . . . . . . . . . . . . . . . .	. . . . . . . . . . . .	H-32
Figure I-1: HP437 Power Meter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .	. . . . . . . . . . . .	I-2
Figure I-2: Gigatronics 8541C Power Meter Detail . . . . . . . . . . . . . . . . . . . . . . . . . . . .	. . . . . . . . . . . .	I-3
Figure I-3: HP8935 Test Set . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .	. . . . . . . . . . . .	I-5
Figure I-4: HP8921A and HP83236A/B . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .	. . . . . . . . . . . .	I-7
Figure I-5: R3465 Communications Test Set . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .	. . . . . . . . . . . .	I-8
Figure I-6: RS232 GPIB Interface Box . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .	. . . . . . . . . . . .	I-8
Figure I-7: Setting Advantest R3267 GPIB Address . . . . . . . . . . . . . . . . . . . . . . . . . . .	. . . . . . . . . . . .	I-9
Figure I-8: Advantest R3562 GPIB Address Switch Setting . . . . . . . . . . . . . . . . . . . . .	. . . . . . . . . . . .	I-10
Figure I-9: Setting Agilent E4406A GPIB Address . . . . . . . . . . . . . . . . . . . . . . . . . . . . .	. . . . . . . . . . . .	I-12
Figure I-10: Setting Agilent E4432B GPIB Address . . . . . . . . . . . . . . . . . . . . . . . . . . .	. . . . . . . . . . . .	I-13
Figure K-1: Cabling of SC 4812ET Companion BTS to SC 4812ET Companion BTS (3 Sector) .		K-2
Figure K-2: WinLMF Display Screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .	. . . . . . . . . . . .	K-4