PAMS Technical Documentation
RAE–2 series PDA Phone
Chapter 12
QUICK GUIDE
Draft 01/99 Copyright 1999 Nokia Mobile Phones. All rights reserved.
RAE–2 series PDA Phone
PAMS
Quick Guide
Contents
Quick guide 12 – 4. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
First start–up 12 – 4. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
To charge the battery 12 – 5. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
To use the battery 12 – 6. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Note 12 – 6. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Communicator 12 – 7. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Display elements 12 – 7. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
To connect to a PC 12 – 7. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
To use the PC Suite with an infrared connection 12 – 8. . . . .
To use the PC Suite with a cable connection 12 – 8. . . . . . . . .
To use the Nokia Communicator Server 12 – 8. . . . . . . . . . . . .
Contacts 12 – 8. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
To make a contact card 12 – 8. . . . . . . . . . . . . . . . . . . . . . . . . . .
Technical Documentation
Page No
Telephone 12 – 9. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
To make a call 12 – 9. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
To answer a call 12 – 9. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Flight profile 12 – 9. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Fax 12 – 10. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
To send a fax 12 – 10. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
To read a received fax 12 – 10. . . . . . . . . . . . . . . . . . . . . . . . . . . .
Short messages 12 – 10. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
To send a message 12 – 11. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
To read a received message 12 – 11. . . . . . . . . . . . . . . . . . . . . .
Internet 12 – 11. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Mail 12 – 11. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
World Wide Web 12 – 12. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
To open a WWW page 12 – 12. . . . . . . . . . . . . . . . . . . . . . . . . . . .
Telnet and Terminal 12 – 12. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
To connect to a Telnet or Terminal host 12 – 13. . . . . . . . . . . . .
Text Web 12 – 13. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
To fetch information 12 – 13. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Notes 12 – 13. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
To write a note 12 – 13. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
To read documents 12 – 13. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
To send a document 12 – 14. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Calendar 12 – 14. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Monthly schedule 12 – 14. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Weekly schedule 12 – 14. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Daily schedule 12 – 14. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
To book events 12 – 14. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Page 12 – 2
Draft 01/99
PAMS
RAE–2 series PDA Phone
Technical Documentation
System 12 – 14. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
To lock the communicator 12 – 15. . . . . . . . . . . . . . . . . . . . . . . . .
To unlock the communicator 12 – 15. . . . . . . . . . . . . . . . . . . . . . .
Infrared activation 12 – 15. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Digital camera connectivity 12 – 15. . . . . . . . . . . . . . . . . . . . . . . .
To use the communicator as a fax modem 12 – 15. . . . . . . . . .
To remove data 12 – 16. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Calculator 12 – 16. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Clock 12 – 16. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Alarm clock 12 – 16. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Composer 12 – 16. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Voice recorder 12 – 16. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Help 12 – 17. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Phone 12 – 17. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
To make and answer calls 12 – 17. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Keys 12 – 17. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Accessories guide 12 – 18. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Memory Card 12 – 18. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Headset 12 – 18. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Advanced Desktop Stand 12 – 18. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Convenient data transfer 12 – 19. . . . . . . . . . . . . . . . . . . . . . . . . .
Advanced HF Car Kit 12 – 19. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Handset Kit 12 – 19. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
To connect to a computer 12 – 20. . . . . . . . . . . . . . . . . . . . . . . . . . .
Ignition sense 12 – 20. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Car radio mute 12 – 21. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Antenna motor control 12 – 21. . . . . . . . . . . . . . . . . . . . . . . . . . . .
Carrying Case 12 – 21. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Other available accessories 12 – 21. . . . . . . . . . . . . . . . . . . . . . . . .
Nokia Wireless Data Forum 12 – 21. . . . . . . . . . . . . . . . . . . . . . . . . . . .
Care and maintenance 12 – 23. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Important safety information 12 – 23. . . . . . . . . . . . . . . . . . . . . . . . . . .
Quick Guide
Draft 01/99
Page 12 – 3
RAE–2 series PDA Phone
PAMS
Quick Guide
Quick guide
FOR YOUR SAFETY Read these simple guidelines. Breaking the rules
may be dangerous or illegal. Further detailed information is given in this
manual.
ROAD SAFETY COMES FIRST Do not use the communicator while
driving; park the vehicle first.
INTERFERENCE All wireless phones may get interference which could
affect performance.
SWITCH OFF IN HOSPITALS Follow any regulations or rules. Switch off
the phone near medical equipment.
SWITCH OFF IN AIRCRAFT Wireless phones can cause interference.
Using them on aircraft is illegal.
SWITCH OFF WHEN REFUELLING Do not use the phone at a refuelling
point. Do not use near fuel or chemicals.
SWITCH OFF NEAR BLASTING Do not use the phone where blasting is
in progress. Observe restrictions, and follow any regulations or rules.
USE SENSIBLY Use only in the normal position (to ear). Do not touch the
antenna unnecessarily.
USE QUALIFIED SERVICE Only qualified service personnel must install
or repair equipment.
ACCESSORIES AND BATTERIES Use only approved accessories and
batteries. Do not connect incompatible products.
MAKING CALLS VIA THE PHONE Close the cover and ensure the phone
is switched on and in service. Enter the phone number, including the
area code, then press ”CALL”. To end a call press ”END CALL”. To
answer a call press ”CALL” .
EMERGENCY CALLS Close the device cover. Ensure the phone is
switched on and in service. Hold for several seconds, to clear the display.
Enter the emergency number, then press ”CALL”. Give your location. Do
not end the call until told to do so.
MAKE BACKUP COPIES Remember to make backup copies of all
important data.
CONNECTING TO OTHER DEVICES When connecting to any other
device, read its user’s guide for detailed safety instructions. Do not
connect incompatible products.
INFRARED PRECAUTIONS Do not point the IR beam at anyone’s eye or
allow it to interfere with other IR devices.
Technical Documentation
First start–up
The Nokia 9110 Communicator can send and receive calls and messages
only when the phone is switched on, has a valid SIM card fitted, and is
Page 12 – 4
Draft 01/99
PAMS
RAE–2 series PDA Phone
Technical Documentation
located in the service area of the cellular network. However, emergency
calls to the international emergency number 112 may be made without
the SIM card in some networks. Please, check with your network
operator.
1 Close the device cover and ensure that the phone is switched off. If it is
on, press the power on/off switch
2 If the battery is connected to the communicator, remove the battery:
press the catch at the top of the battery and lift the battery away from the
battery cavity.
3 Slide the SIM card into the SIM card slot: ensure that the gold contacts
of the SIM card are facing down and that the bevelled corner of the card
is on the right.
Note: Keep all miniature SIM cards out of small children’s reach.
4 When the SIM card is properly inserted into the SIM card slot, the
bevelled corner will remain visible.
5 When you are sure that the SIM card is correctly installed, replace the
battery. If there is little or no charge in the battery, it is recommended that
you connect the communicator to the charger and start charging the
battery before continuing with the start–up procedure. See below.
Quick Guide
6 Open the cover of the communicator. You will see a welcome screen
while the communicator performs a self–test.
7 After the self–test is complete, you will see a list of countries on the
display, see figure 4. Scroll the dark grey selection frame using the arrow
keys on the keyboard over the name of your home country. Press
thebutton on the right side of the display next to the command OK.
Thecapital of your home country will be set as your home city.
8 Write the current date in the input field using the format
forexample
Note: The battery does not fit into place if the SIMcard is not correctly
installed. Do not force the battery into place! Check that you have
inserted the SIM card into the slot as described above. If the SIM card is
incorrectly installed, remove it by pulling it away from the slot, and insert it
again.
9 Write the current time using the 24–hour format
17:25, and press OK.
10 Enter your contact information in the user data card and press OK.
The first start–up is now completed.
After the start–up, do not immediately remove the battery, as the battery
charges the backup battery that supplies power to the real–time clock of
the communicator.
22.03.98
, and press OK.
hh:mm
dd.mm.yy
, for example
,
To charge the battery
1 Connect the charger lead to the bottom of the communicator:
Draft 01/99
Page 12 – 5
RAE–2 series PDA Phone
PAMS
Quick Guide
2 Connect the charger to the proper voltage AC wall outlet. While
charging is in progress, the battery charge indicator scrolls on the display.
To use the battery
Use only batteries approved by the communicator manufacturer and
recharge the battery only with the chargers approved by the
manufacturer. With approved chargers and accessories, the battery can
be charged continuously. The battery need not be fully discharged before
recharging. When a charger is not in use, disconnect it from the power
source. Do not leave the battery connected to a charger for longer than a
week, since excessive charging may shorten its life. If left unused, a fully
charged battery will discharge itself over time.
The battery can be charged and discharged hundreds of times, but it will
eventually wear out. When the operating time (talk–time and standby
time) is noticeably shorter than normal, it is time to buy a new battery.
Note: The communicator can be used normally during charging.
Technical Documentation
Note
Temperature extremes will affect the ability of your battery to charge:
allow it to cool down or warm up first.
Battery operation time is affected by the following: whether both the
phone and the communicator interface are on, radio signal strength,
various phone settings, the use of the backlight, and the length of the
screen blanker period.
It is recommended always to keep a charged battery in the communicator.
Keeping the battery charged maximises the lifetime of the backup battery
supplying power to the real–time clock of the communicator. In case the
backup battery is drained, it will be automatically charged the next time a
charged battery is reconnected to the communicator.
Always close the device cover before removing the battery. Closing the
cover will save all data.
Use the battery only for its intended purpose.
Never use any charger or battery that is damaged or worn out.
Do not short–circuit the battery. Accidental short–circuiting can occur
when a metallic object (coin, clip or pen) causes direct connection of the +
and –terminals of the battery (metal strips on the back of the battery), for
example, when you carry a spare battery in your pocket or purse.
Short–circuiting the terminals may damage the battery or the connecting
object.
Leaving the battery in hot or cold places, such as in a closed car in
summer or winter conditions, will reduce the capacity and lifetime of the
battery. Always try to keep the battery between +15°C (+59°F) and +25°C
(+77°F). A communicator with a hot or cold battery may temporarily not
Page 12 – 6
Draft 01/99
PAMS
RAE–2 series PDA Phone
Technical Documentation
work, even when the battery is fully charged. The performance of
Lithium–ion batteries is particularly limited in temperatures below 0°C
(+32°F).
Do not dispose of batteries in a fire!
Batteries must be recycled or disposed of properly. Batteries must not be
disposed of in municipal waste.
Communicator
To switch on the communicator interface:
The communicator interface is switched on simply by opening the cover.
The application that was active the last time the communicator was used
is shown on the display. When you close the cover, the communicator
interface switches off its display and saves all data.
Display elements
Quick Guide
The indicators show the currently active application along with other
information about the communicator, e.g. battery level and field strength.
The commands always relate to the four command buttons. In this guide,
commands are in bold and items shown on the display are in
When this guide instructs you, for example, to press Open, it means that
you must press the command button next to the command name.
When the search field is shown at the bottom of the display, you can
search for items by using the keyboard to enter text into the search field.
The scroll bar indicates that there are more items than currently shown on
the display. You can scroll the display with the arrow keys of the
keyboard.
When the selection frame is shown, one item is always automatically
selected. You can select other items by moving the selection frame with
the arrow keys on the keyboard. After the correct item has been selected,
press the command you wish to apply to the item, for example, Open or
Delete.
The Menu button opens up a new set of options.
The Zoom button magnifies the view on the display.
italics
.
The Backlight button switches the display light on and off.
To connect to a PC
You can connect your communicator to a suitable PC using the PC Suite
for Nokia 9110 Communicator program, which is found on the CD–ROM
supplied in the communicator sales package. With the PC Suite you can
synchronise contact information, calendar and To–do list between your
communicator and a PC, transfer and backup data, and install various
Draft 01/99
Page 12 – 7
RAE–2 series PDA Phone
PAMS
Quick Guide
software on your communicator. You need only to connect your
communicator to a PC; everything else is done on the PC.
The PC Suite for Nokia 9110 Communicator works with Windows 95/98
and NT.
When connecting your communicator to a PC, you can also select
whether to use the infrared or the cable connection.
To use the PC Suite with an infrared connection
1 Make sure that the infrared port of the communicator faces the infrared
port of the PC.
2 Start the PC Suite software on the PC.
3 Start the Infrared activation application on your communicator and
press Activate. See ”System” in this guide.
To use the PC Suite with a cable connection
1 Connect the 9–pin end of the RS–232 cable to the COM port of the PC,
and the other end to the connector at the bottom of the communicator.
Technical Documentation
2 Start the PC Suite software on the PC.
To use the Nokia Communicator Server
If you have Windows 3.11 or Apple Macintosh, use the Nokia
Communicator Server program for PC connectivity. The Windows version
of the Nokia Communicator Server is found on the diskette in the sales
package, and the Apple Macintosh version is on the CD–ROM.
With the Nokia Communicator Server you can use the communicator
applications that require PC connectivity. You need to connect your
communicator to a PC and start the necessary application on the
communicator.
Contacts
Contacts is used to manage contact information, such as phone numbers
and addresses. The entries in the Contacts directory are called contact
cards. The Contacts directory is used by all the communications
applications: Telephone, Fax, SMS and Mail.
To make a contact card
1 Press the Contacts application button on the communicator keyboard to
start the Contacts application.
2 Press New and write the necessary contact information in the empty
contact card.
Caution: Beware of viruses. Only install on the communicator software
you have obtained from sources that offer adequate protection against
viruses.
Page 12 – 8
Draft 01/99
PAMS
RAE–2 series PDA Phone
Technical Documentation
Telephone
Telephone is used for making and receiving voice calls and adjusting the
Telephone settings. To start the Telephone application, press the Tel.
application button on the keyboard.
To make a call
There are two ways to make a call via the communicator interface:
1 Select a contact from the Telephone directory by moving the selection
frame over the contact’s name, and press Call. If the contact has only
one phone number, the number is called directly.
If the contact has several phone numbers, a pop–up box opens, listing
the phone numbers. Choose a number from the list and press Call. Or,
2 Type the phone number in the search field with the keyboard and press
Call.
Quick Guide
To answer a call
You can answer a call either via the phone or the communicator interface.
When you receive a phone call, a note appears on the communicator
interface display. Press Answer to answer the call, or press End call to
dismiss the call.
Flight profile
The flight profile prevents you from accidentally turning on your phone in
an aircraft.
To set on the flight profile
1 Press Settings in the Telephone main view.
2 Choose
3 Select
4 Press OK.
With the flight profile active, you may read previously downloaded mail,
write mail, notes, short messages, faxes, or update your calendar. Once
you have left the aircraft, you can turn off the flight profile by pressing Exit
profile, turn on the phone by pressing , and your short messages, faxes
and mail will be sent automatically.
Profiles
Profile in use
and press Change.
, press Change and scroll to
Flight
.
Draft 01/99
When the communicator is in the flight profile, emergency calls must be
made from the phone:
1 Press ”CALL” . The phone display will read FLIGHT PROFILE ACTIVE.
2 While the FLIGHT PROFILE ACTIVE text is visible (for approximately
five seconds) you can dial the emergency number, e.g. 112.
Page 12 – 9
RAE–2 series PDA Phone
PAMS
Quick Guide
3 Press ”CALL”.
IMPORTANT! Never use the phone when in an aircraft. If the aircraft
personnel allow use of the communicator interface, you MUST activate
the flight profile. The flight profile will allow use of the communicator
interface only and will prevent use of the phone.
Be aware that all communications applications, Telephone, Fax, SMS,
Mail, and Internet, require use of the phone.
Fax
To start the Fax application, press the Fax button on the communicator
keyboard.
Fax sending and receiving requires that fax calls are supported by the
network you are using and that the fax service is activated for your SIM
card. Contact your service provider for details.
To send a fax
Technical Documentation
1 Press Write fax, and write the fax message.
2 Press Recipient. The Fax directory opens.
3 Select a recipient and press Select.
4 Press Send to send the fax.
To read a received fax
Faxes are received automatically. There are two ways to read a received
fax:
1 When you receive a note informing you that you have received a fax,
press View. To read the fax later, press Cancel. Or,
2 Select the Received faxes folder and press Open. Select the fax and
press Open.
Use the arrow keys to scroll up and down in the fax, or from left to right.
To zoom the fax, press View, and then Zoom in or Zoom out.
Short messages
To start the short message application, press the SMS application button
on the communicator keyboard.
Short message sending and receiving requires that the Short Message
Service (SMS) is available in the network you are using and activated for
your SIM card. Contact your service provider for details.
Before you can send short messages, you must store the SMS message
centre number in the settings of the SMS application.
To send a message
1 Press Write message and write the message contents.
Page 12 – 10
Draft 01/99
PAMS
RAE–2 series PDA Phone
Technical Documentation
2 Press Recipient. The SMS directory opens.
3 Select a recipient and press Select.
4 Press Send. If your message is longer than 160 characters, it will be
sent as several short messages, provided that your network support this
function.
To read a received message
There are two ways to read a received message:
1 When you receive a note informing you that you have received a
message, press View. To read the message later, press Cancel. Or,
2 Select the Received messages folder and press Open. Select the
message and press Open.
Internet
Quick Guide
Mail
Internet access requires that you have obtained an Internet access point
from an Internet service provider and configured the Internet settings
correctly.
Contact your dealer for details.
1 Press the Internet application button on the communicator keyboard.
2 Choose one of the applications and press Select.
The connection to the Internet is established via a data call. This requires
that data calls are supported by the network you are using and that this
service is activated for your SIM card. Contact your service provider for
details.
To close the connection to the Internet, press Hang up in the Internet
main view.
Mail enables you to send and receive e–mail. Mail is compliant with the
Internet standards SMTP, IMAP4, POP3, MIME1 and MIME2. Before
using this application, be sure to enter the correct Mail settings.
1 Press Write mail and write the message.
Draft 01/99
2 Press Recipient. The Mail directory opens.
3 Select a contact and press Select. If the contact has several mail
addresses, choose the address from the pop–up box and press Select.
4 The Mail envelope opens. In the Mail envelope you can check the
sending information and add more recipients by pressing Add recipient
or entering addresses manually.
5 Press Send.
Page 12 – 11
RAE–2 series PDA Phone
PAMS
Quick Guide
The Mail application main view shows the Remote mailbox. The Remote
mailbox, which receives all your mail, is located on a remote computer.
1 Move the selection frame over the Remote mailbox and press Connect.
The communicator connects to the Remote mailbox. All mail in the
Remote mailbox is shown. An unread message has the icon next to it.
2 Fetch all new mail by pressing Fetch new, or fetch individual messages
by selecting the message(s) and pressing Fetch selected. All fetched
mail goes to the Received mail folder of the communicator.
3 When you have fetched all the mail messages you want, disconnect
from the Remote mailbox by pressing Hang up. If you have pressed
Fetch new, the connection is closed automatically after the message(s)
have been fetched.
4 In the Mail application, select the Received mail folder and press Open.
Select a message and press Open again to read the message.
World Wide Web
Technical Documentation
The World Wide Web application is a hypertext–based system for finding
and accessing resources on the Internet.
To open a WWW page
1 Write the URL address of the page in the input field, or select a page
from the Bookmarks list in the WWW main view.
2 Press Go.
3 A data call is made to your Internet access point. After a connection has
been established, the chosen page is fetched from the Internet and
shown on the display.
4 To follow a hyperlink, select it with the selection frame and press Go.
Telnet and Terminal
These applications allow your communicator to connect to computers, like
mainframe computers, which provide terminal services through the
Internet (Telnet) or direct dial–in terminal services (Terminal). Both
applications emulate the VT100 terminal.
To connect to a Telnet or Terminal host
1 Press Define and define a new host (press New) or edit an existing host
(press Edit).
2 Return to the Telnet or Terminal main view, select a host and press
Connect.
3 To send or copy texts between the host computer and the
communicator, press Send text or Capture text. The command is
available once you have connected to the host.
Page 12 – 12
Draft 01/99
PAMS
RAE–2 series PDA Phone
Technical Documentation
4 To disconnect from the host, press Hang up.
Note: The Telnet application canbe installed to your communicator from
the CD–ROM included in the sales package.
Text Web
With Text Web you can fetch information from the Internet, using SMS.
You can also access services provided by your network operator and
Nokia. To define services
1 Press Settings in the Text Web main view.
2 Press New to open an empty service information card, or press Edit to
modify an existing service. Enter the title of the service, the server
number, and the service number.
To fetch information
1 In the Text Web main view, scroll to one of the service access points
that you have defined and press Select.
Quick Guide
2 Enter in the space provided a keyword that describes the type of
information you are looking for.
3 Press Send. When you receive a reply from the service provider, the
TTML browser opens up. Press the arrow keys on the keyboard to move
from one hotspot to another. To follow a hyperlink, press Fetch.
Notes
Notes is used for writing texts and managing documents stored on the
communicator.
To start the Notes application, press the Notes application button on the
communicator keyboard.
To write a note
1 Press Write note in the Notes main view. If you want to format the text,
press Style.
To read documents
1 Select a folder in the Notes main view and press Open.
2 Select a document and press Open.
To send a document
1 Press Send in the opened Note editor.
2 Select one of the following options and press Select:
Draft 01/99
Page 12 – 13
RAE–2 series PDA Phone
PAMS
Quick Guide
To send as a fax, select
To send as a short message, select
To send as e–mail, select
Calendar
To start the Calendar application, press the Calendar application button
onthe communicator keyboard.
Monthly schedule
The monthly schedule is the main view of the Calendar. The daily events
list on
the right side of the display can be edited in the daily schedule.
Weekly schedule
Send as fax
Send as mail
Technical Documentation
.
Send as short message
.
.
To check the weekly schedule, press Week in the monthly or the daily
schedule. The weekly schedule shows the timetable of the selected week.
Daily schedule
The daily schedule is opened by pressing Day in the monthly or the
weekly schedule. The daily schedule displays the events of the selected
day. To adjust the details of the selected event, press Details.
To book events
You can book events in other communicators or remote calendar servers.
1 Select an event in the daily schedule or write a new one.
2 Press Calendar booking in the Details view and select whether to make
the booking as a request or a reservation.
3 Press Send as SMS to open the SMS directory where you can select
the recipient.
4 Press Send to send the booking.
System
To start one of the System applications, press the System application
button on the communicator keyboard, choose an application and press
Select.
The Install/Remove software and Backup/restore applications require the
use of either the PC Suite or the Nokia Communicator Server.
To lock the communicator
1 Open the Security application and press Lock system.
Page 12 – 14
Draft 01/99
PAMS
RAE–2 series PDA Phone
Technical Documentation
2 Enter your lock code if prompted.
To unlock the communicator
1 Enter your lock code in the input field.
2 Press OK.
Infrared activation
If you want to use the PC Suite for Nokia 9110 Communicator program
with the infrared connection, or you want to transfer data between your
communicator and another device via the infrared, you need to use the
Infrared activation application.
1 Make sure that the infrared port of the communicator faces the infrared
port of the PC or another device.
2 Open the Infrared activation application on the communicator.
Quick Guide
3 Press Activate. When transferring data between two communicators,
the activation is done in the communicator that receives the data.
4 To end the infrared connection, press Disable.
Digital camera connectivity
The Digital camera connectivity application enables you to transfer
images between your communicator and a digital still camera via the
infrared connection.
1 Open the Digital camera connectivity application and press Image list.
2 If you are transferring files from your communicator, select the UPF
image(s) you want to transfer.
3 Make sure that the infrared port of your communicator faces the
infrared port of the other device.
4 Press Send to send the images from your communicator, or press
Receive to start transferring images from the other device to your
communicator.
To use the communicator as a fax modem
Draft 01/99
The communicator can be used as a PC fax modem. This requires that
data calls are supported by the network you are using and that this
service is activated for your SIM card. Contact your service provider for
details.
1 Open the Fax modem application, press Settings and select either the
cable or the infrared connection. The infrared connection is
recommended.
2 Connect the communicator to a PC.
Page 12 – 15
RAE–2 series PDA Phone
PAMS
Quick Guide
3 Press Activate. When the communicator is used as a fax modem, the
communications features of the communicator are disabled.
4 To stop using the communicator as a fax modem, press Disable.
To remove data
Data removal enables you to remove data from your communicator.
1 Select one of the data groups:
Documents
Contacts and speed dials.
2 Press Delete. Before the data is removed, you will be prompted for your
lock code.
To start one of the Extras applications, press the button on the
communicator keyboard, select an application and press Select.
Calculator
Technical Documentation
All device data, Calendar data
,
,
Write the calculation in the input field with the keyboard. Press Enter to
perform the calculation. Previous calculations are shown in the list above
the input field.
Clock
The Clock shows the time and date in your home city and country, as well
as in several other cities and countries throughout the world. The time
and date can be adjusted in the Clock settings.
Alarm clock
Press Alarm clock in the Clock main view to access the Alarm clock.
Adjust the alarm time with the + and – command buttons. The alarm
occurs according to the home city time.
Composer
The Composer enables you to compose ringing tones. To compose a new
tune, press Compose.
Voice recorder
The Voice recorder enables you to record telephone conversations,
voicememos, and other sounds. You can also listen to your recordings
and other sound files.
Help
Press the button on the communicator keyboard. The application icon in
the indicator area on the left side of the screen remains in view, reminding
you of the application from where the help was launched.
Page 12 – 16
Draft 01/99
PAMS
RAE–2 series PDA Phone
Technical Documentation
To view the help topics for the current application, press Application
help.
To view general help topics about the communicator, press General help.
To exit the help, press Close.
Phone
To switch on the phone:
1 Close the device cover, if it is open.
2 Press and hold to switch on the phone.
If you are prompted for the PIN code, enter your PIN code, which is
provided with the SIM card, and press the key directly under the OK text
on the display.
As with any other radio transmitting device, do not touch the antenna
unnecessarily when the phone is switched on. Contact with the antenna
affects call quality and may cause the phone to operate at a higher power
level than otherwise needed.
Quick Guide
To make and answer calls
To make a call, enter the area code and the phone number, then press
”CALL”.
To answer a call press ”CALL”.
To end a call press ”END CALL” .
IMPORTANT! Do not switch on the phone when wireless phone use is
prohibited or when it may cause interference or danger.
Keys
— Switches between different operating environments.
— Scroll through menus, submenus or settings. When a call is active,
pressing the scroll keys adjusts the volume level. 0 ... 9
— The number and alphabet keys. To call your voice mailbox, press and
hold 1.
— Used for special purposes in certain functions.
— The function of these two selection keys depends on the text
shown on the bottom line of the display.
Accessories guide
The Nokia 9110 Communicator accessories have been designed for
different users and communication needs. For availability of approved
accessories, please check with your local dealer.
Draft 01/99
Page 12 – 17
RAE–2 series PDA Phone
PAMS
Quick Guide
Use only batteries, chargers, and accessories approved by the
communicator manufacturer for use with this particular communicator
model. The use of any other types will invalidate any approval or warranty
applying to the communicator, and may be dangerous.
Memory Card
The postage stamp sized Memory Card DTS–4 provides 4 MB of
removable storage for the communicator. The memory card increases the
available memory for data and software applications. For further
information, see chapter 3 “Special features” of the User’s manual.
Note: Keep all memory cards out of small children’s reach.
Headset
The Headset HDC–8 offers private headset audio operation. With the
remote control button, which is located in the microphone part of the
headset, you can answer and later end a call. The Headset connects
directly to the connector at the bottom of the communicator.
Technical Documentation
Advanced Desktop Stand
The Advanced Desktop Stand DCH–7 enables charging of the battery of
the communicator, when the communicator is placed in the stand. The
advanced feature of the stand is the easy connection to a computer. The
stand also has a slot for charging batteries separately from the
communicator. This is especially convenient for charging spare batteries.
To charge the communicator battery with the desktop stand
1 Plug the Performance Travel Charger into the stand.
2 Place the communicator in the desktop stand connector end first.
3 Plug the charger into a mains outlet.
To charge a spare battery with the desktop stand
1 Plug the Performance Travel Charger into the stand.
2 Insert the battery in the second slot the golden contacts first. Push the
battery slightly backwards. Ensure that the battery clicks into place.
3 Plug the charger into a mains outlet. Check that the light on the left of
the stand is on. The red light indicates charging, and the steady green
light indicates that the battery is charged.
4 To remove the battery, reverse the procedure
To connect to a PC
With the communicator in the desktop stand, you can connect to a PC
with the RS–232 adapter cable DLR–2.
1 Plug the adapter cable into the connector at the back of the stand.
Page 12 – 18
Draft 01/99
PAMS
RAE–2 series PDA Phone
Technical Documentation
2 Connect the other end of the cable to the PC.
Note: If the communicator is also charging in the desk stand, the charging
of the spare battery will cease until the battery in the communicator is
charged.
3 Place the communicator in the desktop stand connector end first.
4 Start the PC Suite for Nokia 9110 Communicator program on the PC.
Convenient data transfer
You can also synchronise data between your communicator and a
compatible PC organiser program with a single press of the button. For
more information, see the CD–ROM supplied with your communicator.
Advanced HF Car Kit
The Advanced HF Car Kit CARK–99 offers a convenient handsfree option
for using the communicator in a car. The handsfree microphone and
external loudspeaker are always on when the communicator is placed in
its holder. The car kit provides automatic charging and improves network
reception for your communicator. Battery charging times are the same as
those for the charger ACP–9. The car kit must be installed by qualified
personnel.
Quick Guide
Note: For correct button operation, the ACP–9 charger must be
connected to the desk stand.
To place the communicator in the holder
1 Close the cover of the communicator and turn the antenna to a closed
position.
2 Insert the communicator in the car kit holder connector end first.
3 In order not to damage the connectors, press the communicator down
gently until it is securely held by the locking mechanism.
Handset Kit
The optional Handset Kit HSU–1 is a simple handset with no display or
keypad.
It provides privacy for conversation and comfort in a car environment
while your communicator is connected to the car antenna for better
reception. However, do not use the handset while in motion.
To make a call with the car kit
1 Key in the desired number with the keypad.
Draft 01/99
2 Press . For a private call, lift the handset if installed.
To answer a call
1 Press , or, if the handset is installed, lift the handset.
Page 12 – 19
RAE–2 series PDA Phone
PAMS
Quick Guide
If you set the Automatic answer feature on in the Car profile, the
communicator will automatically answer incoming calls.
To switch from handset operation to handsfree operation
Press the Options selection key once and replace the handset in 5
seconds. If you do not press Options before replacing the handset, the
call will end.
To end a call
Press , or, if the handset is installed, replace the handset.
To connect to a computer
With the RS–232 adapter cable DLR–2 you can connect the
communicator to a laptop computer for fax modem use or PC Suite
operation.
1 Close the device cover and place the communicator securely in the car
kit holder.
Technical Documentation
2 Insert the plug of the adapter cable into the connector of the holder. The
connector is located at the bottom of the holder.
Note: The car kit does not include an antenna. Ask your car kit dealer for
available products.
3 Connect the other end of the adapter cable to the serial port of the
computer.
4 Start the necessary application on the computer. If you want to use the
communicator as a fax modem, see chapter 11 “System: Fax modem” of
the User’s manual.
Ignition sense
The ignition sense feature allows the communicator to be automatically
switched on or off whenever the communicator is in the charging holder
and the vehicle is started or switched off. This prevents the communicator
from draining the car battery, if accidentally left on for a long period of
time. If installed, the ignition sense is always available. If you do not wish
to enable the ignition sense, ask your dealer to leave it uninstalled.
When the ignition is turned off, the message
used
seconds unless
Phone will power off, if not
is displayed. The communicator will be switched off after 15
you press any key or take the communicator from the holder during this
time.
Car radio mute
This feature mutes the car radio during a phone call, if supported by the
car radio. Ask your dealer to connect the car radio mute during
installation.
Page 12 – 20
Draft 01/99
PAMS
RAE–2 series PDA Phone
Technical Documentation
Antenna motor control
If installed, this feature will activate the electrical motor of the mobile
antenna.
Carrying Case
The convenient Carrying Case (CBR–4, CBR–5) protects the
communicator wherever you are, and keeps the communicator always at
hand.
Mobile Charger
The Mobile Charger LCH–9 provides an easy and convenient way to
charge the communicator battery in a vehicle. It is suitable for most
vehicles’ cigarette lighter sockets. Plug the lead from the Mobile Charger
into the bottom connector of the communicator.
Other available accessories
Quick Guide
High Power Battery BLN–3 — This is a powerful slim Lithium–ion battery.
It provides the same capacity as the battery supplied with your
communicator.
RS–232 Adapter Cable DLR–2 — The cable provides a convenient way
to connect your communicator to a PC or to a printer.
Performance Travel Charger ACP–9 — This charger is a lightweight and
durable charger which functions over most mains voltages. The
communicator can be operated normally during charging. Charging time
is typically 2 hours, depending on how drained the battery is. To charge
the communicator, connect the charger lead to the bottom connector of
the communicator and plug the charger into the mains.
Upgrade HF Car Kit — The Upgrade HF Car Kit CARK–102 offers an
easy way to upgrade from CARK–74, which is compatible with the Nokia
8100 series and 3110 wireless phones, to CARK–99.
Note: Use only the ACP–9 and LCH–9 chargers with the communicator.
Nokia Wireless Data Forum
Nokia Wireless Data Forum is a Web service that offers support for Nokia
9110 Communicator and the other Nokia wireless data products. The
Web site contains documents, drivers, manuals, information on
compatibility issues, etc.
Draft 01/99
The main focus of the Nokia Wireless Data Forum is to serve corporate
and business users. It provides, for example, references on solutions that
have been tailored for the needs of corporate customers.
Nokia Wireless Data Forum can be found at http://www.forum.nokia.com
Club Nokia Careline
Page 12 – 21
RAE–2 series PDA Phone
PAMS
Quick Guide
You can contact the Club Nokia Careline for help or questions you may
have concerning the Nokia 9110 Communicator and its functions.
Free support is available for Club Nokia Careline members for the first
membership year. Before calling you have to register with Club Nokia
either via http://club.nokia.com or by sending the invitation, enclosed in
the sales package, to Club Nokia.
Please look up the serial number of your device before calling. It is visible
when you remove the battery from the device. The serial number appears
on the sticker attached to the device. You also need to note your Club
Nokia membership number.
The Club Nokia Careline is available Monday–Friday 9.00 am to 5.30 pm
local time, but not on national holidays. Nokia reserves the right to
changes without prior notice.
Club Nokia Careline phone numbers
Non–members
Technical Documentation
If you are not a member of Club Nokia you can call +32 70 23 30 58
(charge for international call) from all the countries mentioned above.
You can also contact your dealer when you have a problem.
Country Careline number Tariff per minute
Austria 0660 7420 charge for local call
Belgium 0800 965 76 charge for local call
Czech Republic +3270 233 412 charge for international call
Denmark 8001 5437 charge for local call
Finland 0800 113 275 charge for local call
France 0800 901 953 charge for local call
Germany 0130 860 355 charge for local call
Greece 00800 3222 303 charge for local call
Hungary 00800 125 31 charge for local call
Ireland 1800 55 32 75 charge for local call
Italy 1677 803 06 charge for local call
Luxembourg 0800 2493 charge for local call
Netherlands 0602 248 98 charge for local call
Norway 8001 1475 charge for local call
Poland 00800 3211 231 charge for local call
Portugal 0505 329 930 charge for local call
Spain 9009 832 30 charge for local call
Sweden 0207 945 38 charge for local call
Page 12 – 22
Draft 01/99
PAMS
RAE–2 series PDA Phone
Technical Documentation
Switzerland 0800 557 749 charge for local call
Turkey 00800 3291 303 charge for local call
UK 0800 898 397 charge for local call
Care and maintenance
Your Nokia 9110 Communicator is a product of superior design and
craftsmanship and should be treated with care. The suggestions below
will help you fulfil any warranty obligations and enjoy this product for
many years.
When using your communicator, battery, charger OR any accessory:
Keep it and all its parts and accessories out of small children’s reach.
Keep it dry. Precipitation, humidity and liquids contain minerals that will
corrode electronic circuits.
Do not use or store it in dusty, dirty areas. Its moving parts can be
damaged.
Quick Guide
Do not store it in hot areas. High temperatures can shorten the life of
electronic devices, damage batteries, and warp or melt certain plastics.
Do not store it in cold areas. When the communicator warms up (to its
normal temperature), moisture can form inside the communicator, which
may damage electronic circuit boards.
Do not attempt to open it. Non–expert handling of the device may
damage it. Do not drop, knock or shake it. Rough handling can break
internal circuit boards.
Do not use harsh chemicals, cleaning solvents, or strong detergents to
clean it. Wipe it with a soft cloth slightly dampened in a mild
soap–and–water solution.
Do not paint it. Paint can clog the device’s moving parts and prevent
proper operation.
Use only the supplied or an approved replacement antenna.
Unauthorised antennas, modifications or attachments could damage the
communicator and may violate regulations governing radio devices.
If the communicator, battery, charger or any accessory is not working
properly, take it to your nearest qualified service facility. The personnel
there will assist you and, if necessary, arrange for service.
Important safety information
Traffic safety
Do not use a communicator while driving a vehicle. If using a
communicator, park the vehicle first. Always secure the communicator in
its holder; do not place the communicator on the passenger seat or where
it can break loose in a collision or sudden stop.
Draft 01/99
Page 12 – 23
RAE–2 series PDA Phone
PAMS
Quick Guide
The use of an alert device to operate a vehicle’s lights or horn on public
roads is not permitted.
Remember, road safety always comes first!
Operating environment
Remember to follow any special regulations in force in any area and
alwaysswitch off the phone of your communicator whenever it is forbidden
to use it, or when it may cause interference or danger.
When connecting the communicator or any accessory to another device,
read its user’s guide for detailed safety instructions. Do not connect
incompatible products.
As with other mobile radio transmitting equipment, users are advised that
for the satisfactory operation of the equipment and for the safety of
personnel, it is recommended that the equipment should only be used in
the normal operating position (held to your ear with the antenna pointing
over your shoulder).
Technical Documentation
Do not point the infrared beam at anyone’s eye or allow it to interfere with
other infrared devices.
Electronic devices
Most modern electronic equipment is shielded from radio frequency (RF)
signals. However, certain electronic equipment may not be shielded
against the RF signals from your communicator.
Pacemakers: Pacemaker manufacturers recommend that a minimum
separation of 20 cm (6 inches) be maintained between a handheld
wireless phone and a pacemaker to avoid potential interference with the
pacemaker.
These recommendations are consistent with the independent research by
and recommendations of Wireless Technology Research. Persons with
pacemakers:
Should always keep the communicator more than 20 cm (6 inches) from
their pacemaker when the phone is switched on;
Should not carry the communicator in a breast pocket;
Should use the ear opposite the pacemaker to minimise the potential for
interference.
If you have any reason to suspect that interference is taking place, switch
off the phone of your communicator immediately.
Hearing aids: Some digital wireless phones may interfere with some
hearing aids.
In the event of such interference, you may want to consult your service
provider.
Other medical devices: Operation of any radio transmitting
equipment,including communicators, may interfere with the functionality
Page 12 – 24
Draft 01/99
PAMS
RAE–2 series PDA Phone
Technical Documentation
of inadequately protected medical devices. Consult a physician or the
manufacturer of the medical device to determine if they are adequately
shielded from external RF energy or if you have any questions. Switch off
the phone of your communicator in health care facilities when any
regulations posted in these areas instruct you to do so. Hospitals or
health care facilities may be using equipment that could be sensitive to
external RF energy.
Vehicles: RF signals may affect improperly installed or inadequately
shielded electronic systems in motor vehicles (e.g. electronic fuel injection
systems, electronic anti–skid (anti–lock) braking systems, electronic
speed control systems, air bag systems). Check with the manufacturer or
its representative regarding your vehicle. You should also consult the
manufacturer of any equipment that has been added to your vehicle.
Posted facilities: Switch off the phone of your communicator in any facility
where posted notices so require.
Potentially explosive atmospheres Switch off the phone of your
communicator when in any area with a potentiallyexplosive atmosphere
and obey all signs and instructions. Sparks in such areas could cause an
explosion or fire resulting in bodily injury or even death.
Quick Guide
Users are advised to switch off the phone when at a refuelling point
(service station). Users are reminded of the need to observe restrictions
on the use of radio equipment in fuel depots (fuel storage and distribution
areas), chemical plants or where blasting operations are in progress.
Areas with a potentially explosive atmosphere are often but not always
clearly marked. They include below deck on boats; chemical transfer or
storage facilities; vehicles using liquified petroleum gas (such as propane
or butane); areas where the air contains chemicals or particles, such as
grain, dust or metal powders; and any other area where you would
normally be advised to turn off your vehicle engine.
Vehicles
Only qualified personnel should service the communicator, or install the
communicator in a vehicle. Faulty installation or service may be
dangerous and may invalidate any warranty which may apply to the unit.
Check regularly that all wireless phone equipment in your vehicle is
mounted and operating properly.
Do not store or carry flammable liquids, gases or explosive materials in
the same compartment as the communicator, its parts or accessories.
For vehicles equipped with an air bag, remember that an air bag inflates
with great force. Do not place objects, including both installed or portable
wireless
Draft 01/99
equipment in the area over the air bag or in the air bag deployment area.
If in–vehicle wireless equipment is improperly installed and the air bag
inflates, serious injury could result.
Switch off the phone of your communicator before boarding an aircraft.
The use of wireless telephones in an aircraft may be dangerous to the
Page 12 – 25
RAE–2 series PDA Phone
PAMS
Quick Guide
operation of the aircraft, disrupt the wireless telephone network and may
be illegal. Failure to observe these instructions may lead to suspension or
denial of telephone services to the offender, or legal action or both.
Emergency calls
IMPORTANT!
The Nokia 9110 Communicator, like any wireless phone, operates using
radio signals, wireless and landline networks as well as
user–programmed functions which cannot guarantee connection in all
conditions. Therefore you should never rely solely upon any wireless
phone for essential communications (e.g. medical emergencies).
Remember, to make or receive any calls the phone must be switched on
and in a service area with adequate signal strength. Emergency calls may
not be possible on all wireless phone networks or when certain network
services and/ or phone features are in use. Check with local service
providers.
To make an emergency call
Technical Documentation
1 If the device cover is open, close the cover.
2 If the phone is not on, switch it on (press the key). Some networks may
require that a valid SIM card is properly inserted in the communicator.
3 Press and hold the key for several seconds to ready the phone for calls
and to end possible active data or fax calls.
4 Key in the emergency number for your present location (e.g. 112 or
other official emergency number). Emergency numbers vary by location.
5 Press the key.
If certain features are in use (call barring, fixed dialling, closed user
group, system lock, etc.), you may first need to turn those features off
before you can make an emergency call. Consult the User’s manual and
your local cellular service provider.
When making an emergency call, remember to give all the necessary
information as accurately as possible. Remember that your communicator
may be the only means of communication at the scene of an accident –
do not cut off the call until given permission to do so.
To use this guide
The wireless phone described in this guide is approved for use in the
GSMnetworks.
A number of features included in this manual are called network services.
They are special services provided by wireless service providers. Before
you cantake advantage of any of these network services, you must
subscribe to theservice(s) you require from your home service provider
and obtain instructionsfor their use. You can then activate these functions
as described in this manual. The manual activation commands for various
services are not presented in this manual (e.g. using the and characters
Page 12 – 26
Draft 01/99
PAMS
RAE–2 series PDA Phone
Technical Documentation
for activating or deactivating services). The Nokia 9110 Communicator is,
nevertheless, capable of handling commands given in that form. For
these commands, please consult with your service providers.
WARNING! This apparatus is intended for use when supplied with power
from a Lithium–ion battery and chargers ACP–9E, ACP–9X and ACP–9A.
Other usage will invalidate any approval given to this apparatus and may
be dangerous.
Quick Guide
Draft 01/99
Page 12 – 27
RAE–2 series PDA Phone
PAMS
Quick Guide
Technical Documentation
This page intentionally left blank.
Page 12 – 28
Draft 01/99
Loading...