The Service Box JBU–6 is used:
– to make connection between transceiver and FLA–5/7 for flashing
– to help functional tests
– to enable connection to test/measurument devices
– to generate accurate 4.1 and 8.4 voltage for Vbatt and Vin/Vchar lines
– to generate accurate 500mA current for charging calibration Vin line
– to generate 10 ms IBI–pulse to BTMP–line
NOTE: JBU–6 cover should be closed during measurements.
RF Adapter RA6 and RF Coupler JS4 for Service Box JBU–6
RF Adapter RA6:0770174RF Coupler JS4:0201496
NOTE! See also
RA6 and JS4 calibration information in Service
Software–Tuning
Instructions section.
Issue 1 06/2000
E Nokia Mobile Phones Ltd.
Pinset Cable SCD–6:
Spare part for JBU–6.
Page 5
Page 6
NSB–6
Service Tools
Test Jig MJS–9
The Test Jig MJS–9 is used for repair of system/RF module*. The zoom in
picture contains two changeable over voltage protection components:
SM Fuse F2.0 A 32V 1206 F 001 T5119002 (larger of the two)
VWM 5.6V VC15.5 R 008 T1825019
Product Code
Module Jig MJS–9:0770154
View of MJS–9
PAMS Technical Documentation
Page 6
*Note: The nominal supply voltage for MJS–9 is +8.0 V.
The supply voltage must not exceed +15.0 V.
(MJS–9 has overvoltage protection).
E Nokia Mobile Phones Ltd.
Issue 1 06/2000
Page 7
PAMS Technical Documentation
Soldering Jig MJS–21
The Soldering Jig MJS–21 is used for soldering (in automatic soldering
machines) and as a rework jig for system module, if special fixtures (like
extra feet) are used.
Product Code
Module Jig MJS–21:0770225
Rubber Feet (4 pcs included with MJS–21):6501005
View of MJS–21
NSB–6
Service Tools
Issue 1 06/2000
E Nokia Mobile Phones Ltd.
Page 7
Page 8
NSB–6
Service Tools
RF Test Adapter AAT–8 (Service Antenna)
The Service Antenna AAT–8 is used in place of the phone’s normal
antenna during RF measurements. Use RF Cable XRF–1 (0730085).
Product Code
RF Test Adapter AAT–8:0770173
View of AAT–8
PAMS Technical Documentation
Page 8
E Nokia Mobile Phones Ltd.
Issue 1 06/2000
Page 9
PAMS Technical Documentation
Flash Loading Adapter FLA–10
The Flash Loading Adapter FLA–10 is used in place of the phone’s normal
battery during service or flashing, to supply a controlled operating voltage.
The Battery Connector Extractor Tool is used to remove the antenna or
battery connector from the main frame.
Product Code
Battery Connector Extractor Tool SRT–3:0770226
View of SRT–3
PAMS Technical Documentation
Page 10
E Nokia Mobile Phones Ltd.
Issue 1 06/2000
Page 11
PAMS Technical Documentation
Flash Loading Adapter FLA–5 (Sales Pack)
The Flash Loading Adapter FLA–5 is used with the Falsh Loading Adapter
FLA–10 and Service Cable XMS–3. Power is supplied to FLA–5 from the
Flash Security Box TDF–4 via the DC cable PCC–1, (The PCC–1 cable
can be replaced with a Travel Charger ACH–6), and is connected to the
Flash Prommer FPS–4S with the cable AXS–5.
The sales pack includes:
– Flash Loader Adapter FLA–50770085
– Service cable SCH–50730098
– D15 – D15 Cable AXS–50730091
– Installation software for FPS–48400041
Sales package code
Flash Loading Adapter FLA–5:0080178
NSB–6
Service Tools
View of FLA–5
Issue 1 06/2000
E Nokia Mobile Phones Ltd.
Page 11
Page 12
NSB–6
Service Tools
PAMS Technical Documentation
Flash Loading Adapter FLA–7 (Sales Pack) Optional
NOTE: If you already have FLA–5, FLA–7 is not needed. The Flash
Loading Adapter FLA–7 is used with the FLA–10 and Service Cable
XMS–3. Power is supplied to FLA–7 from the Flash Security Box TDF–4
via the DC cable PCC–1, (The PCC–1 cable can be replaced with a Travel
Charger ACH–6), and is connected to the Flash Prommer FPS–4S with
the cable AXS–5.
The sales pack includes:
– Flash Loading Adapter FLA–70770119
– *Service Cable XCM–50730142
– Power Cable SCF–70730141
– Service Cable assy AXS–50730091
Note: Service Cable XMS–3 (0730174) is used with NSB–6.
Sales package code
Flash Loading Adapter FLA–7:0080326
View of FLA–7
Page 12
E Nokia Mobile Phones Ltd.
Issue 1 06/2000
Page 13
PAMS Technical Documentation
Flash Prommer FPS–4S (Sales Pack)
The Flash Prommer FPS–4S is used to update the main software of the
phone. Updating is done by first loading the new MCU software from the
PC to the flash prommer, and then loading the new SW from the prommer
to the phone. When updating more than one phone in succession, the
MCU software only needs to be loaded to the prommer once.
The Security Box TDF–4 is required for updating MCU software, and infra
red testing.
Note 1:TDF–4 is delivered in de–activated mode. Fill in the enclosed
Activation Request Form, and fax to NMP Salo to get the
activation code
Note 2:The infra red module JLP–1 (P/N 0750079) is not included in
the TDF–4 sales package
Product Code
Security Box TDF–4:0770106
View of TDF–4
PAMS Technical Documentation
View of IR Data Interface Module JLP–1
IR Data Interface Module JLP–1 fits in the Security Box TDF–4 and can
be used to perform IR tests with WinTesla.
Product Code
IR Data Interface Module JLP–1:0750079
Page 14
E Nokia Mobile Phones Ltd.
Issue 1 06/2000
Page 15
PAMS Technical Documentation
Audio Box JBA–6
The Service Audio Box JBA–6 is used between the phone and audio
measuring equipment.
Product Code
Service Audio Box JBA–6:0770184
View of JBA–6
NSB–6
Service Tools
XMICP
XEARP
Issue 1 06/2000
E Nokia Mobile Phones Ltd.
Page 15
Page 16
NSB–6
Service Tools
Audio Cable ADS–3
The Audio Cable ADS–3 is used with JBA–6 Audio Box. Cable length is 40
cm.
Product Code
Audio Cable ADS–3:0730197
View of ADS–3
PAMS Technical Documentation
Page 16
E Nokia Mobile Phones Ltd.
Issue 1 06/2000
Page 17
PAMS Technical Documentation
Service Cable AXS–4
The D9–D9 Service Cable AXS–4 is used to connect two 9 pin D
connectors e.g. between PC and TDF–4 seurity box. Cable lenght is 2
meters.
Product code
D9–D9 Service Cable AXS–40730090
View of AXS–4
NSB–6
Service Tools
Issue 1 06/2000
E Nokia Mobile Phones Ltd.
Page 17
Page 18
NSB–6
Service Tools
Service Cable AXS–4U
The D9–D9 Service Cable AXS–4U is used to connect two 9 pin D
connectors e.g. between PC’s serial port and FLS–2D. Cable length is 30
cm.
Product code
D9–D9 Service Cable AXS–4U0730163
View of AXS–4U
PAMS Technical Documentation
Page 18
E Nokia Mobile Phones Ltd.
Issue 1 06/2000
Page 19
PAMS Technical Documentation
D15–D15 Cable AXS–5 (Option for Americas)
The D15–D15 Cable AXS–5 is used to connect two 15 pin D connectors.
e.g. between FLA–5/7 and FPS–4S.
Product Code
D15–D15 Cable AXS–5:0730091
View of AXS–5
NSB–6
Service Tools
Issue 1 06/2000
E Nokia Mobile Phones Ltd.
Page 19
Page 20
NSB–6
Service Tools
MBUS Cable DAU–9S
The MBUS Cable DAU–9S has a modular connector, and is used with the
service Audio Box JBA–4, or a modular T–adapter.
Product Code
MBUS Cable DAU–9S:0730108
View of DAU–9S
PAMS Technical Documentation
Page 20
E Nokia Mobile Phones Ltd.
Issue 1 06/2000
Page 21
PAMS Technical Documentation
DC Charging Cable PCC–1
The DC Cable PCC–1 is used e.g. to connect FLA–5/7 and TDF–4.
Product Code
DC Cable PCC–1 (with modular RJ connector):0730053
View of PCC–1
NSB–6
Service Tools
Issue 1 06/2000
E Nokia Mobile Phones Ltd.
Page 21
Page 22
NSB–6
Service Tools
Power Cable PCS–1
The Power Cable PCS–1 is used to connect the module jigs MJS–9 and
JBU–6 to an external power supply. Can be used with FPS–4 also.
Product Code
Power Cable PCS–1:0730012
View of PCS–1
PAMS Technical Documentation
Page 22
E Nokia Mobile Phones Ltd.
Issue 1 06/2000
Page 23
PAMS Technical Documentation
DC Cable SCB–3
The DC Cable SCB–3 is used to connect the Service Battery to the
charger connection Vin of the phone when doing the charger calibration
service procedure.
Product Code
DC Cable SCB–3:0730114
View of SCB–3
NSB–6
Service Tools
Issue 1 06/2000
E Nokia Mobile Phones Ltd.
Page 23
Page 24
NSB–6
Service Tools
DC Power Cable SCF–7
The DC Power Cable SCF–7 is used for connecting power from ACL–3
charger via FLA–7 to FPS–4.
Product code
The DC Power Cable SCF–7:0730141
View of SCF–7
PAMS Technical Documentation
Page 24
E Nokia Mobile Phones Ltd.
Issue 1 06/2000
Page 25
PAMS Technical Documentation
Service Cable XMS–3
XMS–3 is a modular cable for flashing and service purposes.
Product code
Service Cable XMS–3:0730174
View of XMS–3
NSB–6
Service Tools
Issue 1 06/2000
E Nokia Mobile Phones Ltd.
Page 25
Page 26
NSB–6
Service Tools
RF Cable XRF–1
RF cable XRF–1 is used to connect RF Test adapter AAT–8 or Test frame
MJS–9 to RF measurement equipment.
Product code
RF Cable XRF–1:0730085
View of XRF–1
PAMS Technical Documentation
Page 26
E Nokia Mobile Phones Ltd.
Issue 1 06/2000
Page 27
PAMS Technical Documentation
RF Cable XRS–3
RF cable XRS–3 is used to connect JBU–6 Service Box to RF
measurement equipment.
Product code
RF Cable XRS–3:0730184
View of XRS–3
NSB–6
Service Tools
Issue 1 06/2000
E Nokia Mobile Phones Ltd.
Page 27
Page 28
NSB–6
Service Tools
SW Security Device PKD–1
SW security device is a piece of hardware enabling the use of the service
software when connected to the parallel (LPT) port of the PC. Whithout
the dongle present it is not possible to use the service software. Printer or
any such device can be connected to the PC through the dongle if
needed.
Caution: Make sure thet you have switched off the PC and the printer
before making connections!
Caution: Do not connected the PKD–1 to the serial port. You may
damage your PKD–1!
Product Code
SW Security Device PKD–1:0750018
View of SW Security Device
PAMS Technical Documentation
Page 28
E Nokia Mobile Phones Ltd.
Issue 1 06/2000
Page 29
PAMS Technical Documentation
Dongle/Flash Device FLS–2D (Sales Pack)
FLS-2D is a dongle and flash device incorporated into one package,
developed specifically for POS use. Use Flash Loading Adapter FLA–10
(0081346) with FLS–2D.
Note: in addition to this Sales Pack, a Service Cable will be required to connect the
FLS-2D to the Product/Phone to be flashed, e.g. XMS-3, and a software package to run
the flashing process.
Issue 1 06/2000
AXS-4U Cable.
Disk- Installation package,16bit Dongle Drivers.
Disk - Installation package, 32bit Dongle Drivers.
Disk - Installation package for the FLE-5 Drivers.
Disk - Remote Update Application Installation Package.
Installation and User Guide
Registration Request Form
E Nokia Mobile Phones Ltd.
Page 29
Page 30
NSB–6
Service Tools
PAMS Technical Documentation
This page intentionally left blank.
Page 30
E Nokia Mobile Phones Ltd.
Issue 1 06/2000
Loading...
+ hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.