Nokia 8801, 8800 User Manual
User Guide
Guide de l’utilisation
Nokia 8800 and Nokia 8801 User Guide
Issue 1_draft07
Remarque: La version française du guide se trouve à la page 99.
9232467
1
LEGAL INFORMATION
DECLARATION OF CONFORMITY
We, NOKIA CORPORATION declare under our sole responsibility that the products RM-13 and
RM-33 are in conformity with the provisions of the following Council Directive:1999/5/EC.
A copy of the Declaration of Conformity can be found at
http://www.nokia.com/phones/declaration_of_conformity/
.
PART NO. 9238832, ISSUE NO. 1
Copyright © 2005 Nokia. All rights reserved.
Nokia, Nokia Connecting People, Nokia 8800, Nokia 8801, Pop-Port, PC Suite, and the Nokia
Original Enhancements logos are trademarks or registered trademarks of Nokia Corporation.
Other company and product names mentioned herein may be trademarks or trade names of
their respective owners.
Nokia tune is a sound mark of Nokia Corporation.
US Patent No 5818437 and other pending patents. T9 text input software
Copyright © 1999-2005. Tegic Communications, Inc. All rights reserved.
Includes RSA BSAFE cryptographic or security protocol software from
RSA Security.
Java is a trademark of Sun Microsystems, Inc.
Bluetooth is a registered trademark of Bluetooth SIG, Inc.
This product is licensed under the MPEG-4 Visual Patent Portfolio License (i) for personal and
non-commercial use in connection with information which has been encoded in compliance
with the MPEG-4 Visual Standard by a consumer engaged in a personal and non-commercial
activity and (ii) for use in connection with MPEG-4 video provided by a licensed video
provider. No license is granted or shall be implied for any other use. Additional information
including that relating to promotional, internal and commercial uses may be obtained from
MPEG LA, LLC. See http://www.mpegla.com
The information contained in this user guide was written for the Nokia 8800 and Nokia 8801
products. Nokia operates a policy of ongoing development. Nokia reserves the right to make
changes to any of the products described in this document without prior notice.
.
2
UNDER NO CIRCUMSTANCES SHALL NOKIA BE RESPONSIBLE FOR ANY LOSS OF DATA OR
INCOME OR ANY SPECIAL, INCIDENTAL, AND CONSEQUENTIAL OR INDIRECT DAMAGES
HOWSOEVER CAUSED. THE CONTENTS OF THIS DOCUMENT ARE PROVIDED "AS IS." EXCEPT
AS REQUIRED BY APPLICABLE LAW, NO WARRANTIES OF ANY KIND, EITHER EXPRESS OR
IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY
AND FITN ESS FOR A PARTICULAR PURPOSE, ARE MADE IN RELATION TO THE A CCURACY AND
RELIABILITY OR CONTENTS OF THIS DOCUMEN T. NOKIA RESERVES THE RIGHT TO REVISE THIS
DOCUMENT OR WITHDRAW IT AT ANY TIME WITHOUT PRIOR NOTICE.
EXPORT CONTROLS
This device may contain commodities, technology, or software subject to export laws and
regulations from the U.S. and other countries. Diversion contrary to law is prohibited.
FCC/INDUSTRY CANADA NOTICE
Your device may cause TV or radio interference (for example, when using a telephone in close
proximity to receiving equipment). The FCC or Industry Canada can require you to stop using
your telephone if such interference cannot be eliminated. If you require assistance, contact
your local service facility. This device complies with part 15 of the FCC rules. Operation is
subject to the condition that this device does not cause harmful interference.
3
Contents
Contents
For your safety...................................................................................... 5
1. Welcome......................................................................................... 8
2. Getting started............................................................................. 10
3. Your phone................................................................................... 14
4. Phone security.............................................................................. 17
5. Call functions............................................................................... 19
6. Phone menus................................................................................ 21
7. Messages....................................................................................... 22
8. Contacts........................................................................................ 37
9. Call log.......................................................................................... 43
10. Settings......................................................................................... 44
11. Operator menu............................................................................. 54
12. Gallery........................................................................................... 55
13. Media............................................................................................ 56
14. Organizer ...................................................................................... 61
15. Applications.................................................................................. 69
16. Web............................................................................................... 71
17. SIM services.................................................................................. 78
18. Computer connectivity ................................................................ 79
19. Enhancements.............................................................................. 80
20. Reference information................................................................. 81
Care and maintenance ....................................................................... 88
Statements from other agencies ....................................................... 89
Index.....................................................................................................96
4
For your safety
For your safety
Read these simple guidelines. Not following them may be dangerous or illegal.
Read the complete user guide for further information.
SWITCH ON SAFELY
Do not switch the device on when wireless phone use is prohibited or
when it may cause interference or danger.
ROAD SAFETY COMES FIRST
Obey all local laws. Always keep your hands free to operate the
vehicle while driving. Your first consideration while driving should be
road safety.
INTERFERENCE
All wireless phones may be susceptible to interference, which could
affect performance.
SWITCH OFF IN HOSPITALS
Follow any restrictions. Switch the phone off near medical equipment.
SWITCH OFF IN AIRCRAFT
Follow any restrictions. Wireless devices can cause interference
in aircraft.
SWITCH OFF WHEN REFUELING
Do not use the phone at a refuelling point. Do not use near fuel
or chemicals.
SWITCH OFF NEAR BLASTING
Follow any restrictions. Do not use the phone where blasting is
in progress.
USE SENSIBLY
Use only in the normal position as explained in the product
documentation. Do not touch the antenna unnecessarily.
QUALIFIED SERVICE
Only qualified personnel may install or repair this product.
ENHANCEMENTS AND BATTERIES
Use only approved enhancements and batteries. Do not connect
incompatible products.
5
For your safety
BACKUP COPIES
Remember to make back-up copies or keep a written record of all
important information.
WATER-RESISTANCE
Your phone is not water-resistant. Keep it dry.
CONNECTING TO OTHER DEVICES
When connecting to any other device, read its user guide for detailed
safety instructions. Do not connect incompatible products.
EMERGENCY CALLS
Ensure the phone is switched on and in service. Press the end key as
many times as neede d to clear the display and return to the sta rt screen.
Enter the emergency num ber, then press the call key. Give your loca tion.
Do not end the call until given permission to do so.
■ About your device
The wireless device described in this guide is approved for use on the EGSM 850,
EGSM 900, GSM 1800, and EGSM 1900 networks:
Nokia 8800 phone RM-13 900, 1800, and 1900 networks
Nokia 8801 phone RM-33 850, 1800, and 1900 networks
When using the features in this device, obey all laws and respect privacy and
legitimate rights of others.
Warning: To use any features in this device, other than the alarm clock,
the phone must be switched on. Do not switch the device on when
wireless phone use may cause interference or danger.
■ Network services
To use the phone you must have service from a wireless service provider. Many of
the features in this device depend on features in the wireless network to function.
These network services may not be available on all networks or you may have to
make specific arrangements with your service provider before you can utilize
network services. Your service provider may need to give you additional instructions
for their use and explain what charges will apply. Some networks may have
limitations that affect how you can use network services. For instance, some
networks may not support all language-dependent characters and services.
6
For your safety
Your service provider may have requested that certain features be disabled or not
activated in your device. If so, they will not appear on your device menu. Your
device may also have been specially configured. This configuration may include
changes in menu names, menu order and icons. Contact your service provider for
more information.
■ Shared memory
The phone has two different memory allocations. The following features in this
device may share the first memory: contacts, text messages, multimedia messages
(but no attachments), instant messages, groups, voice tags, calendar, and to-do
notes. The second shared memory is used by files stored in the Gallery, attachments
of multimedia messages, e-mail, and Java
these features may reduce the memory available for the remaining features sharing
memory. For example, saving many Java
memory. Your device may display a message that the memory is full when you try
to use a shared me mory feature. In this case, delete some o f the information or
entries stored in the shared memory features before continuing. Some of the
features, such as text messages, may have a certain amount of memory specially
allotted to them in addition to the memory shared with other features.
TM
applications. Use of one or more of
applications may use all of the available
7
Welcome
1. Welcome
Congratulations on your purchase of the Nokia 8800 or Nokia 8801 mobile phone.
This is a product of superior design and craftsmanship, so please handle your
phone with special care. Besides your mobile phone having stainless steel covers
and a glass display treated for scratch resistance, some of its other features include
a calendar, a clock, an alarm clock, a radio, a music player, and a built-in camera.
■ Updates
From time to time, Nokia may update this guide to reflect changes. The latest
version may be available at www.nokiausa.com
be available at www.nokiausa.com
.
■ Register your phone
Make sure to register your phone at www.warranty.nokiausa.com or call
1-888-NOKIA-2U (1-888-665-4228) so that we can serve your needs better if
you should need to call a customer center or to have your phone repaired.
■ Get help
Find your phone label
If you need to call the Nokia Customer Care
Center or your service provider, you will
need to provide specific information about
your phone. This information is provided on
the phone label (1), which is on the back of
the phone (under the battery). It contains
the model and serial numbers, as well as
other important information about your phone.
To help Nokia promptly answer your questions, please have the following
information available before contacting the Nokia Customer Care Center:
• Your phone model number (8800 or 8801)
• Type number (RM-13 or RM-33)
• International mobile equipment identity (IMEI)
• Your postal code
• The phone or enhancement in question
. Also, an interactive tutorial may
8
Welcome
■ Accessibility solutions
Nokia is committed to making mobile phones easy to use for all individuals,
including those with disabilities. For more information, visit the web site at
www.nokiaaccessibility.com
.
■ E-newsletters
When you register your phone, you can sign up for the Nokia e-newsletter, Nokia
Connections. You will receive tips and tricks on using your phone, enhancement
information, and special offers.
■ Copyright protection
Copyright protections may prevent some images, ringing tones, and other content
from being copied, modified, transferred, or forwarded.
■ Configuration settings service
To use some of the network services, such as mobile Internet services, multimedia
messaging service (MMS), or remote Internet server synchronization, your phone
needs the correct configuration settings. You may be able to receive the settings
directly as a configuration message. After receiving the settings, you need to save
them on your phone. The service provider may provide a PIN that is needed to
save the settings. For more information on availability of the settings, contact
your service provider.
When you have received a configuration message, Configuration settings received
is displayed.
• To save the settings, select Show > Save. If the phone requests Enter settings'
PIN:, enter the PIN code for the settings, and select OK. To receive the PIN code,
contact the service provider who supplies the settings. If no settings are saved
yet, these settings are saved and set as default configuration settings.
Otherwise, the phone asks, Activate saved configuration settings?.
• To discard the received settings, select Show > Discard.
• To edit the settings, see "Configuration" on page 51.
■ Network support
This device supports WAP 2.0 protocols (HTTP and SSL) that run on TCP/IP protocols.
Some features of this device, such as text messages, multimedia messages, instant
messages, e-mail, presence enhanced contacts, mobile Internet services, content
and application downloads, and synchronization with a remote Internet server,
require network support for these technologies.
9
Getting started
2. Getting started
■ SIM card installation
Keep all SIM cards out of the reach of small children. For availability and
information on using SIM card services, contact your SIM card vendor. This may
be the service provider, network operator, or another vendor. Before installing
the SIM card and removing the battery, always make sure that the phone is
switched off and disconnected from any enhancement.
The SIM card and its contacts can easily be damaged by scratches or bending, so
be careful when handling, inserting, or removing the card.
To install the SIM card:
1. Push the sideways release buttons to
release the back cover of the phone.
2. Slide the back cover to remove it from
the phone.
3. Unlock the battery for the Nokia 8801
phone. See "Battery lock" on page 11.
Remove the battery, as shown in the
illustration.
4. Insert the SIM card into the SIM card
holder as shown. Make sure that the gold
colored contact area on the SIM card is
facing downwards.
10
Getting started
5. Position the
battery so the
gold colored
contacts match
up with those on
the phone. Insert
the battery,
contact end first
into the battery
slot. Snap the other end of the battery into place. Lock the battery for the
Nokia 8801 phone. See "Battery lock" on page 11.
6. Slide the back cover into place.
■ Battery lock
The battery lock feature allows the phone battery to remain securely in place. The
battery lock is only available in the Nokia 8801 phone.
• To lock the battery, push the battery lock mechanism to the right (1) until it
locks into place (2).
• To unlock the battery, push the battery lock mechanism to the left until it unlocks.
■ Charge the battery
Warning: Use only batteries, chargers, and enhancements approved by
Nokia for use with this particular model. The use of any other types may
invalidate any approval or warranty, and may be dangerous.
This device is intended for use with the BL-5X battery. Always use original Nokia
batteries. See "Nokia battery authentication guidelines" on page 81.
11
Getting started
Check the model number of any charger before use with this device. This device is
intended for use when supplied with power from the ACP-12 charger.
For availability of approved enhancements, please check with your dealer.
1. Connect the charger to a standard
wall outlet.
2. Insert the charger plug into the
round jack in the bottom of the
phone. If the battery is completely
empty, it may take a few minutes
before the charging indicator
appears on the display or before
any calls can be made.
3. Disconnect the charger from
the phone when the battery is
fully charged.
You can use the phone while the charger is connected. The charging time depends
on the charger and the battery used. For example, charging a BL-5X battery with
the ACP-12 charger takes approximately 1 hour and 5 minutes while the phone is
in the standby mode.
■ Turn the phone on and off
Press and hold the power key as shown. If the phone asks for a
PIN, enter the code, and select OK.
When you turn on your phone for the first time, the phone is in
standby mode (see "Standby mode" on page 15) and a query
appears, asking for the configuration settings from your service
provider (network service). Confirm or decline the query.
See "Configuration settings service" on page 9.
■ Open the keypad
1. Hold the phone in one hand.
2. With the other hand, press your thumb on the part of the
phone that is below the display screen.
3. Push the top part of the phone (slide) upwards, as shown in
the illustration.
12
Getting started
■ Normal operating position
Use the phone only in its normal
operating position.
Your device has an internal antenna.
Note: As with any other radio transmitting device, do not touch the
antenna unnecessarily when the device is switched on. Contact with the
antenna affects call quality and may cause the device to operate at a
higher power level than otherwise needed. Avoiding contact with the
antenna area when operating the device optimizes the antenna
performance and the battery life.
13
Your phone
3. Your phone
■ Keys and parts
• Power key (1)
• Loudspeaker (2)
• Earpiece (3)
• Left selection key (4)
Right selection key (5)
Middle selection key (6)
The function of the selection key depends
on the guiding text shown on the display
above the key.
• 4-way scroll key (7) that allows you to scroll
up, down, left and right
• Call key (8) dials a phone number and answers
a call
• End key (9) ends an active call and allows you
to exit from any function
• Battery cover release buttons (10)
• Microphone (11)
• Charger connector (12)
• Enhancements connector (13)
• Camera lens (14)
• Headset HS-15, rotating clip (15)
14
15
Your phone
■ Standby mode
When you turn on your phone, the first screen that appears is the start screen,
which indicates your phone is in the standby mode. When your phone is in the
standby mode, the selection keys access specific functions, and the indicators
appear on the start screen. Indicators show the status of the phone.
• The name of the wireless service provider (1) displays
in the middle of the start screen.
• The signal strength indicator (2) shows the strength
of the signal to your phone. The higher the bar, the
stronger the signal.
• The battery strength indicator (3) shows how much
power is left in your phone battery. The higher the
bar, the more power in the battery.
• The left selection key (4) in the standby mode is Go to. Your most frequently
used functions can be quickly accessed from the Go to menu.
To activate a function, select it.
To view a list with available functions, select Options > Select options. To
add a function to the shortcut list, select Mark or to remove a function from
the list, select Unmark.
To rearrange the functions in your personal shortcut list, select Options >
Organize. Scroll to the function you want, select Move, and scroll to where
you want to move the function.
• The middle selection key in the standby mode is Menu (5).
• The right selection key in the standby mode may be Names (6) to access the
Names menu, an operator-specific key to access an operator’s home page, or
a specific function that you have selected in the right selection key menu.
Power saving screen saver
To save power, a digital clock screen saver overwrites the
display when no function of the phone has been used for a
certain period of time. Select Menu > Settings > Display >
Power saver > On to activate the screen saver or press any
key to deactivate it.
15
Your phone
■ Indicators and icons
Your phone has two types of identifiers: indicators and icons.
Indicators
See "Standby mode" on page 15 for information on indicators.
Icons
Icons are graphical representations of a specific item or situation. The following
list describes each icon.
You have received one or several text or multimedia messages.
You have received one or several multimedia messages.
The phone registered a missed call.
The phone keypad is locked.
The phone does not ring for an incoming call or text message when
Incoming call alert is set to Off and Message alert tone is set to Off.
The alarm clock is set.
Shown in the top left of the display when the packet data connection
mode Always online is selected and the packet data service is available.
Shown in the top left of the display when the packet data connection
is established.
Shown in the top right of the display when the packet data connection
is suspended (on hold); for example, if there is an incoming or outgoing
call during the packet data connection.
Indicates an active Bluetooth wireless connection.
16
Phone security
4. Phone security
Your phone is equipped with different security features that allow you to avoid
making accidental calls and prevent unauthorized use of your phone.
■ Keypad lock (keyguard)
The keyguard disables your keypad to prevent accidental key presses.
• To lock the keypad and the power key, close the slide, and press the left
selection key (Lock) to confirm; or select Menu and press * within 3.5seconds.
• To unlock the keypad, open the slide; or select Unlock and press *
within 1.5 seconds.
If the Security keyguard is set to On, enter the security code if requested.
To answer a call when the keyguard is on, press the call key. When you end or reject
the call, the keypad is automatically locked.
When the keyguard is on, calls still may be possible to the official emergency number
programmed into your phone. Enter the emergency number and press the call key.
For information about Automatic keyguard and Security keyguard, see "Phone"
on page 50.
■ Access codes
Security code
The security code (5 to 10 digits) helps to protect your phone against unauthorized
use. The preset code is 12345. To change the code, and to set the phone to request
the code, see "Security" on page 52.
PIN codes
The PIN (personal identification number) code and the UPIN (universal personal
identification number) code (4 to 8 digits) help to protect your SIM card against
unauthorized use. See "Security" on page 52.
The PIN2 code (4 to 8 digits) may be supplied with the SIM card and is required to
access some functions, such as call counters.
The module PIN is required to access the information in the security module.
See "Security module" on page 76.
The signing PIN is required for the digital signature. See "Digital signature" on
page 77.
17
Phone security
PUK codes
The PUK (personal unblocking key) code and the UPUK (universal personal unblocking
key) code (8 digits) is required to change a blocked PIN code and UPIN code,
respectively. The PUK2 code (8 digits) is required to change a blocked PIN2 code.
Call restrictions password
The call restrictions password (4 digits) is required when using the Call restrictions
function. See "Security" on page 52.
Wallet code
The wallet code (4 to 10 digits) is required to access the wallet services.
For further information, see "Wallet" on page 63.
18
Call functions
5. Call functions
■ Make a call
1. Enter the phone number, including the area code. To delete an incorrect
character, select Clear.
For international calls, press * twice for the international prefix (the + character
replaces the international access code) and then enter the country code, the area
code without the leading 0, if necessary, and the phone number.
2. To call the number, press the call key.
3. To end the call or to cancel the call attempt, press the end key, or close the slide.
■ 1-touch dialing
Assign a phone number to one of the 1-touch dialing keys, 2 to 9. Call the number
by one of the following ways:
• Press a 1-touch dialing key and then press the call key.
•If 1-touch dialing is set to On, press and hold a 1-touch dialing key until the
call is started. See 1-touch dialing in "Call" on page 50.
■ Answer or reject a call
• Open the slide or press the call key to answer the call. To mute the ringing
tone, select Silence.
• To reject an incoming call when the slide is open, press the end key.
If Forward if busy is activated in your voice is activated in your voice mailbox, the
call is forwarded to your voice mail. If not, the call is rejected. If a compatible headset
supplied with the headset key is connected to the phone, press the headset key to
answer and end a call.
Call waiting (network service)
To answer the waiting call during an active call, press the call key. The first call is
put on hold. To end the active call, press the end key.
To activate the Call waiting function, see "Call" on page 50.
19
Call functions
■ Options during a call
Many of the options that you can use during a call are network services.
For availability, contact your network operator or service provider.
To increase or decrease the volume during a call, press the navigation key right or left.
For some of the following options, select Options during a call:
Mute or Unmute, Contacts, Menu, Record, Lock keypad, Loudspeaker or Handset,
and the network services Hold or Unhold, Answer and Decline, New call, Touch
tones (to send tone strings), Swap (to switch between the active call and the call
on hold), Transfer calls (to connect a call on hold to an active call and disconnect
yourself), Conference (to make a conference call that allows up to five persons to
take part in a conference call), Add to conference, Private call (to discuss privately
in a conference call), End call, and End all calls.
Do not hold the device near your ear when the loudspeaker is in use, because the
volume may be extremely loud.
20
Phone menus
6. Phone menus
Phone features are grouped according to function and are accessed through the
main menus of your phone. Each main menu contains submenus and lists from
which you can select or view items and customize phone features. You can access
these menus and submenus by using the scroll method.
Some menus may not be available, depending on your network. For more information,
contact your service provider.
■ Menu views
Your phone may have two types of menu views: List and Grid.
In the List interface, images introduce every menu. Use the scroll up and scroll down
keys to navigate through the menus. As you scroll through the menus, the menu
number appears in the upper right corner of the display. Below the menu number is a
scroll bar with a tab. The tab moves up or down as you scroll through the menus,
providing a visual representation of your current position in the menu structure.
In the Grid interface, multiple menu icons appear on a single display. Use the
four-way scroll key to navigate through the icons. The name of the menu appears
at the top of the display and the icon for the selected menu is outlined.
To change the menu view, select Options > Main menu view > List or Grid.
■ Access a menu function
1. Select Menu and the menu you want.
2. If the menu contains submenus, select the one that you want.
3. If the selected menu contains further submenu s, select the one that you want
4. To return to the previous menu level, select Back. To exit the menu, select Exit.
21
Messages
7. Messages
You can use mobile messages to keep in touch with friends,
family, and business associates by using the short message
service (SMS). Not all messaging features are available in all
wireless networks. Contact your service provider for availability
and subscription information.
When sending messages, your phone may display the w ords Message sent. This is an
indication that the message has been sent by your device to the message centre
number programmed into your device. This is not an indication that the message
has been received at the intended destination. For more details about messaging
services, check with your service provider.
■ Text messages (network service)
Your device supports the sending of text messages beyond the character limit for a
single message. If your message exceeds 160 characters, it will be sent as a series
of two or more messages. In the navigation bar, you can see the message length
indicator counting backwards from 160. For example, 10/2 means that you can
still add 10 characters for the text to be sent as two messages.
Using special (Unicode) characters, such as ë, â, á, ì, takes up more space. If there
are special characters in your message, the indicator may not show the message
length correctly. Before the message is sent, the device tells you if the message
exceeds the maximum length allowed for one message. You can cancel sending
by selecting Cancel or you can save the message in the inbox.
You can add pictures and templates to your text messages. Text templates are
indicated by and picture templates are indicated by . Each picture message
is made up of several text messages. Therefore, sending one picture message may
cost more than sending one text message. Contact your service provider for
pricing information.
Before you can send any text, picture, or e-mail message, you need to save some
message settings. See "Message settings" on page 34.
To check SMS e-mail service availability and to subscribe to the service, contact
your service provider.
22
Messages
Text entry
You can enter text while writing messages by using traditional or predictive text
input. When using traditional text input, press a number key, 1 to 9, repeatedly
until the character you want appears. In predictive text input you can enter a
letter with a single key press.
When you write text, appears at the top left of the display, indicating predictive
text input, and appears, indicating traditional text input. , , or
appears next to the text input indicator, indicating the character case. To change the
character case, press #. indicates number mode. To change from the letter to
number mode, press and hold #, and select Number mode.
Settings
To set the writing language to a language other than that selected (see Phone
language on page 50), select Options > Writing language. Predictive text input
is only available for the languages on the list.
To set the predictive text input option, select Options > Dictionary on, or to set
traditional text input option select Options > Dictionary off.
Predictive text input
Predictive text input allows you to write text quickly by using the phone keypad
and a built-in dictionary.
1. Start writing a word, using the keys, 2 to 9, and press each key only once for
one letter. The word changes after each keystroke.
2. When you finish writing the word and it is correct, press 0.
3. If a displayed word is not correct, press * repeatedly or select Options >
Matches. When the word that you want appears, select Use.
4. If the ? character is displayed after the word, the word you intended to write
is not in the dictionary. To add the word to the dictionary, select Spell. The
phone displays the entered letters. Enter the word (traditional text input is
used), and select Save.
Traditional text input
Press a number key, 1 to 9, repeatedly until the character you want appears. Not
all characters available under a number key are printed on the key. The characters
available depend on the selected writing language. See "Settings" on page 23.
If the next letter you want is located on the same key as the present one, wait
until the cursor appears, or press any of the navigation keys, and enter the letter.
The most common punctuation marks and special characters are available under
the number key 1 and a space can be inserted by pressing 0.
23
Messages
Write and send
1. Select Menu > Messages > Create message > Text message.
2. Enter a message. See "Text entry" on page 23.
3. To insert a template to the text message, select Use template and the
template you want to insert.
4. To send the message, select Send > Recently used, To phone number, To many,
or To e-mail address and enter a phone number or e-mail address.
5. To send a message using a predefined message profile, select Via sending profile.
For the sending profile, see "Text and SMS e-mail" on page 34.
Read and reply
is shown when you have receiv ed a message or an e-mail using SMS.
The blinking indicates that the message memory is full. Before you can
receive new messages, delete some of your old messages in the Inbox folder.
1. To view a new message, select Show. To view it later, select Exit.
To read the message later, select Menu > Messages > Inbox. If more than
one message has been received, select the message that you want to read.
indicates an unread message.
2. While reading a message, select Options and delete or forward the message,
edit the message as a text message or an SMS e-mail, rename the message you
are reading or move it to another folder, or view or extract message details.
You can also copy text from the beginning of the message to your phone
calendar as a reminder note. To save the picture in the Templates folder when
reading a picture message, select Save picture.
3. To reply as a message, select Reply > Text message or Multimedia msg..
Enter the reply message. When replying to an e-mail, first confirm or edit the
e-mail address and subject.
4. To send the message to the displayed number, select Send > OK.
Templates
To access the template list, select Menu > Messages > Saved items > Text
messages > Templates.
24
Messages
■ Multimedia messages (network service)
Note: Only devices that offer compatible multimedia message or e-mail
features can receive and display multimedia messages. Multimedia
message objects may contain viruses or otherwise be harmful to your
device or PC. Do not open any attachment if you are not sure of the
trustworthiness of the sender.
A multimedia message can contain text, sound, a picture, a calendar note, a business
card, or a video clip. The phone supports multimedia messages that are up to 300KB
(some operators/networks may limit this to 100 KB) in size. If the message is too
large, the phone may not be able to receive it. Some networks allow text messages
that include an Internet address where you can view the multimedia message.
Multimedia messaging supports the following formats:
• Picture: JPEG, GIF, WBMP, BMP, and PNG
• Sound: MP3, AAC, Scalable polyphonic MIDI (SP-MIDI), AMR audio and
monophonic ringing tones
• Video clips: 3GP format with QCIF and SubQCIF image size and AMR, WB
AMR, or ACC LC audio
You cannot receive multimedia messages during a call, a game, another Java
application, or an active browsing session over GSM data. Because delivery of
multimedia messages can fail for various reasons, do not rely solely upon them
for essential communications.
Write and send
To set the settings for multimedia messaging, see "Multimedia" on page 34. To
check availability and to subscribe to the multimedia messaging service, contact
your service provider.
1. Select Menu > Messages > Create message > Multimedia msg..
2. Enter a message. See "Text entry" on page 23.
• To insert a file from the Gallery, select Options > Insert > Image, Sound
clip or Video clip and the option you want.
If you select Options > Insert > New sound clip, the Recorder opens, and
you can start a new recording. When you have finished the recording, it is
added to the message.
If you select Options > Insert > New image, the Camera opens, and you
can take a new photo to add to the message.
• To insert a business card or a calendar not e in the message, se lect
Options > Insert > Business card or Calendar note.
25
Messages
• Your phone supports multimedia messages that contain several pages (slides).
Each slide can contain text, one image, a calendar note, a business card,
and one sound clip. To insert a slide in the message, select Options >
Insert > Slide.
To open the slide you want (if the message contains several slides),
select Options > Previous slide > Next slide or Slide list.
To set the interval between the slides, select Options > Slide timing.
To move the text component to the top or bottom of the message,
select Options > Place text first or Place text last.
• The following options may also be available: Delete to delete an image,
slide or sound clip from the message, Clear text, Preview, Save message.
In More options, the following options may be available: Insert contact,
Insert number, Message details, and Edit subject.
3. To send the message, select Send > Recently used, To phone number,
To e-mail address or To many.
4. Enter the recipient’s phone number or e-mail address, or search for it in
Contacts > Names. Select OK and the message is moved to the Outbox
folder for sending.
While the multimedia message is being sent, the animate d icon is displayed
and you can use other functions on the phone. If the sending fails, the phone
tries to resend it a few times. If this fails, the message remains in the Outbox
folder and you can try to resend it later.
If Save sent messages > Yes is selected, the sent message is saved in the Sent
items folder. See "Multimedia" on page 34. When the message is sent, it is not
an indication that the message has been received at the intended destination.
Read and reply
The default setting of the multimedia message service is generally on. The appearance
of a multimedia message may vary depending on the receiving device.
When your phone is receiving a multimedia message, the animated icon is
displayed. When the message has been received, and the text Multimedia
message received are shown.
1. To read the message, select Show. To view it later, select Exit.
To read the message later, select Menu > Messages > Inbox. In the list of
messages, indicates an unread message. Select the message that you
want to view.
26
Messages
2. The function of the middle selection key changes according to the currently
displayed attachment in the message.
To view the whole message if the received message contains a presentation,
select Play.
Otherwise, select Play to listen to a sound clip or view a video clip attached to
the message. To zoom in on an image, select Zoom. To vie w a b usi nes s ca rd o r
a calendar note, or to open a theme object, select Open. To open a streaming
link, select Load.
3. To reply to the message, select Options > Reply > Text message or Multimedia
msg.. Enter the reply message, and select Send. You can send the reply message
only to the person who sent you the original message.
Select Options and some of the following options may be also available: Play
presentation, View text, Open image, Open sound clip or Open video clip,
Save image, Save sound clip, Save video clip, Details, Delete message, Reply,
Reply to all, Forward to no., Forward to e-mail or Forward to many, Edit,
and Message details.
Memory full
When you have a new multimedia message waiting and the memory for the messages
is full, blinks and Multimedia memory full. View waiting message. is shown.
To view the waiting message, select Show. To save the message, select Save.
To delete old messages, select the folder and the message you want to delete.
To discard the waiting message, select Exit > Yes. If you select No, you can view
the message.
Folders
The phone saves received text and multimedia messages in the Inbox folder.
Multimedia messages that have not yet been sent are moved to the Outbox folder.
If you have selected Message settings > Text messages > Save sent messages >
Yes > Message settings > Multimedia msgs. > Save sent messages > Yes, the
sent messages are saved in the Sent items folder.
To save the text message that you are writing and wish to send later in the Saved
items folder, select Options > Save message > Saved text msgs. For multimedia
messages, select the option Save message. indicates unsent messages.
To organize your text messages, you can move some of them to My folders, or
add new folders for your messages. Select Messages > Saved items > Text
messages > My folders.
27
Messages
To add a folder, select Options > Add folder. If you have not saved any folders,
select Add.
To delete or rename a folder, scroll to the folder you want, and select Options >
Delete folder or Rename folder.
■ Instant messaging (network service)
You can take text messaging to the next level by experiencing instant messaging
(IM) in a wireless environment. You can engage in instant messaging with friends
and family, regardless of the mobile system or platform (like the Internet) they
are using, as long as you all use the same instant messaging service.
Before you can start using instant messaging, you must first subscribe to your
wireless service provider’s text messaging service and register with the instant
messaging service you want to use. You must also obtain a user name and password
before you can use instant messaging. See "Register with an instant messaging
service" on page 28 for more information.
Note: Depending on both your IM service provider and your wireless
service provider, you may not have access to all of the features described
in this guide.
To set the required settings for the instant messaging service, see Connect. settings
in "Access" on page 28. The icons and texts on the display may vary, depending
on the instant messaging service.
Depending on the network, the active instant mes saging conversation may consume
the phone battery faster, and you may need to connect the phone to a charger.
Register with an instant messaging service
You can do this by registering over the Internet with the IM service provider you
have selected to use. During the registration process, you will have the opportunity
to create the user name and password of your choice. For more information about
signing up for instant messaging services, contact your wireless service provider.
Access
To access the menu while still offline, select Menu > Messages > Instant messages.
If more than one set of connection settings for instant messaging service is available,
select the one you want. If there is only one set defined, it is selected automatically.
The following options are shown: Login to connect to the instant messaging service,
Saved conversations to view, erase or rename the instant messages conversations
that you have saved during the instant messages session, or Connect. settings to
edit the settings needed for messaging and presence connection.
28
Messages
Connect
To connect to the instant messaging service, open the Instant messages menu,
activate an instant messaging service, and select Login. When the phone has
successfully connected, Logged in is displayed.
To disconnect from the instant messaging service, select Logout.
Sessions
Connect to the instant messaging service and select one of the following
Conversations to view the list of new and read instant messages or invitations to
instant messaging during the active instant m essaging session. Scroll to the message
or invitation that you want and select Open to read the message.
• indicates a new group message
• indicates a read group message
• indicates a new instant message
• indicates a read instant message
• indicates an invitation
The icons and texts on the display may vary, depending on the instant messaging
service you have selected.
IM contacts includes the contacts that you have added. Scroll to the contact with
whom you would like to chat and select Chat or Open if a new contact is shown
in the list. To add contacts see "IM contacts" on page 31.
indicates the online and the offline contacts in the phone contacts memory.
indicates a blocked contact. indicates a contact that has been sent a
new message.
Groups > Public groups. The list of bookmarks to public groups provided by the
service provider is displayed. To start a instant messaging session with a group,
scroll to a group, and select Join. Enter the screen name that you want to use in the
conversation. When you have successfully joined the group conversation, you can
start a group conversation. To create a private group, see "Groups" on page 31.
Search > Users or Groups to search for other instant messaging users or public
groups on the network by phone number, screen name, e-mail address, or name.
If you select Groups, you can search for a group by a member in the group, or by
group name, topic, or ID.
To start the conversation when you have found the user or the group that you
want, select Options > Chat or Join group.
29
Loading...