Nokia 5190 User Manual

OWNER’S

MANUAL

Keys

C key

Clears characters from the screen. Press and hold to return to the start screen.

Navi™ key

Its current function is displayed above it. Use to access the menu, make calls, etc.

Voice mail

Press and hold 1 to access voice mail (see p. 22).

Power key

Press and hold to turn your phone on or off.

0HQX

Scroll keys

Press to scroll through menus and phone book. They also adjust speaker volume while in a call.

Emergency 9 key

See p. 29.

Quick guide to functions

Call functions

Make a call Answer a call Answer a call

with call waiting End a call Reject a call Reject a call

with call waiting Redial

Enter phone number, press Press

$QVZHU

Press

2SWLRQV

Press

(QG

Press Press

2SWLRQV

Press , scroll to number, press

, select

&DOO

$QVZHU

5HMHFW

&DOO

Adjust call volume Use the in-call menu Use 1-touch dialing

Press or during a call In a call, press , press Press and hold one of keys 2 through 8

Phone book functions

Save a number

Find a name/number

Find a name/number during a call

View associated phone number

Store a 1-touch dial number

Enter a number, press or , press

6DYH

Press , scroll or enter first letter of name

Press , press

3KRQH ERRN

Scroll to name, press and hold

Press

0HQX

press

$VVLJQ

press

Other essential shortcuts

Turn Keyguard on Turn Keyguard off Check voic e mail

Choose a quick alert setting

Turn lights on for 15 seconds

Press

0HQX

Press

8QORFN

Press and hold the key (see p. 22)

Briefly press , select setting, press

If Keyguard is off, press any key; If Keyguard is on, briefly press

2SWLRQV

, enter a name, press

2SWLRQV

1 7, scroll to desired key,

, select name or number,

, select

Quick guide to the menu

Access menu Scroll Go back a level Exit the menu/

access start screen Menu shortcuts

Press

0HQX

Press or Press Press and hold

Press

, then the menu number

0HQX

Phone menu shortcuts

Note: Menu items in your phone vary depending on the network, SIM card, and accessories used.

1 Phone book

Add entry

Edit

Erase

Send entry

Options

1-touch dialing

Service nos.

2Messages

Text messages

Message settings

Voice mailbox number

News & info service

Service command editor

3 Call log

Missed calls

Received calls

Dialed calls

Clear call lists

Call timers

Show call costs

Call cost settings

4Settings

Call settings

Security settings

Phone settings

Analog module settings

5 Forwarding

Forward all voice calls

Forward when not able to

take calls Cancel all call forwarding

6Games

Memory

Snake

Logic

7Calculator 8Clock

Alarm clock

Clock settings

9Tones

Ringing options

Ringing tone

Ringing volume

Message alert tone

Keypad tones

Warning tones

Vibrating alert

Indicators and Icons

You have an active call .

You have one or more new voice messages.

You have one or more new text messages. (If blinking, text message memory is full.)

Keyguard is on. Your phone will not accept any keypresses. To turn it off, press

The alarm clock is set.

8QORFN

, then .

The have set the ringing option to

Incoming voice calls are being forwarded to another number. (1 above this icon means calls to line 1 are forwarded; 2 means calls to line 2 are forwarded; 12 means calls to both lines are forwarded.)

Analog mode is active (see “Optional analog

module” on page 64).

Your phone is roaming outside its home system.

The phone is ready for you to enter a response.

Characters entered will be upper-case letters. Press the key to switch letter case.

Characters entered will be lower-case letters. Press the key to switch letter case.

Characters entered will be numbers. (W hen entering letters, switch to numbers by pressing and holding the key.)

You are in “special character” mode; select a character, then press switch to special characters by pressing the key.)

quick alert setting is selected, or you

6LOHQW

. (When entering letters,

8VH

1. For your safety 1

FCC/Industry Canada Notice . . . . . . . . . . . . . . . .2

Using this Guide. . . . . . . . . . . . . . . . . . . . . . . . . .2

2. Preparing the phone for use 3

Inserting the SIM card. . . . . . . . . . . . . . . . . . . . .3

Attaching the battery . . . . . . . . . . . . . . . . . . . . .4

Removing the battery . . . . . . . . . . . . . . . . . . . . .5

Battery charging . . . . . . . . . . . . . . . . . . . . . . . . .5

Important battery information . . . . . . . . . . . . . .6

3. About the phone, keys & menu 8

Power key . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8

Nokia Navi™ key. . . . . . . . . . . . . . . . . . . . . . . . . .8

Scroll keys. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8

C key . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8

Lights. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9

Start screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9

Menu. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9

Entering letters and numbers . . . . . . . . . . . . . .12

Special characters in names and messages .1 3

Special characters in phone numbers . . . . . .14

Keyguard (locking the keypad) . . . . . . . . . . . . .14

4. Settings 16

Automatic redial . . . . . . . . . . . . . . . . . . . . . . . .16

Calling card set-up . . . . . . . . . . . . . . . . . . . . . .16

Clock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18

Language . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18

Lights. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19

Send own number . . . . . . . . . . . . . . . . . . . . . . .19

System selection . . . . . . . . . . . . . . . . . . . . . . . .19

Tones. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20

Quick alert settings. . . . . . . . . . . . . . . . . . . . .21

Voice mailbox number. . . . . . . . . . . . . . . . . . . .22

Welcome note . . . . . . . . . . . . . . . . . . . . . . . . . .23

5. Basic functions 24

Turning the phone on or off . . . . . . . . . . . . . . .24

Checking signal strength. . . . . . . . . . . . . . . . . .24

Making a call . . . . . . . . . . . . . . . . . . . . . . . . . . .25

Adjusting earpiece volume . . . . . . . . . . . . . . . .25

Ending a call. . . . . . . . . . . . . . . . . . . . . . . . . . . .25

Last number redial . . . . . . . . . . . . . . . . . . . . . . .25

Saving a name and number . . . . . . . . . . . . . . .26

Finding a name and number. . . . . . . . . . . . . . .26

Answering a call. . . . . . . . . . . . . . . . . . . . . . . . .26

Rejecting a call. . . . . . . . . . . . . . . . . . . . . . . . . .27

6. Emergency calls 28

Emergency key 9 . . . . . . . . . . . . . . . . . . . . . . . .29

7. Advanced functions 30

In-call menu. . . . . . . . . . . . . . . . . . . . . . . . . . . .30

Call hold . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .30

Making/receiving multiple calls . . . . . . . . . . . .31

Call waiting . . . . . . . . . . . . . . . . . . . . . . . . . . .31

Call forwarding. . . . . . . . . . . . . . . . . . . . . . . . . .32

1-touch dialing . . . . . . . . . . . . . . . . . . . . . . . . .32

Choosing an outgoing line . . . . . . . . . . . . . . . .33

Calling card calls . . . . . . . . . . . . . . . . . . . . . . . .34

List of own numbers . . . . . . . . . . . . . . . . . . . . .34

Automatic answer . . . . . . . . . . . . . . . . . . . . . . .34

Touch tones . . . . . . . . . . . . . . . . . . . . . . . . . . . .34

Fax and data calls . . . . . . . . . . . . . . . . . . . . . . .35

Service command editor . . . . . . . . . . . . . . . . . .36

8. Phone book 37

Saving names and numbers . . . . . . . . . . . . . . .37

Finding names and numbers. . . . . . . . . . . . . . .38

Editing names and numbers . . . . . . . . . . . . . . .39

Erasing names and numbers. . . . . . . . . . . . . . .39

Exchanging names and numbers . . . . . . . . . . .39

Scrolling view. . . . . . . . . . . . . . . . . . . . . . . . . . .39

Checking available memory . . . . . . . . . . . . . . .40

Service numbers. . . . . . . . . . . . . . . . . . . . . . . . .40

9. Call log 41

Missed calls . . . . . . . . . . . . . . . . . . . . . . . . . . . .41

Received calls. . . . . . . . . . . . . . . . . . . . . . . . . . .42

Dialed calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . .42

Clearing call lists . . . . . . . . . . . . . . . . . . . . . . . .42

Call timers. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .42

10. Controlling call costs 44

Viewing call costs . . . . . . . . . . . . . . . . . . . . . . .44

Limiting call costs . . . . . . . . . . . . . . . . . . . . . . .45

11. Voi ce messages 4 6

Saving your voice mailbox number. . . . . . . . . .46

Listening to voice messages . . . . . . . . . . . . . . .46

Calling your voice mailbox at any time . . . . . .46

12. Text messages 47

Writing a message . . . . . . . . . . . . . . . . . . . . . . .47

Saving a message. . . . . . . . . . . . . . . . . . . . . . . .47

Sending a message. . . . . . . . . . . . . . . . . . . . . . .47

Reading a message . . . . . . . . . . . . . . . . . . . . . .48

About the Inbox . . . . . . . . . . . . . . . . . . . . . . . . .48

About the Outbox . . . . . . . . . . . . . . . . . . . . . . .49

Message storage . . . . . . . . . . . . . . . . . . . . . . . .50

Message settings . . . . . . . . . . . . . . . . . . . . . . . .50

News & info service. . . . . . . . . . . . . . . . . . . . . .51

13. Other features 53

Games. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .53

Calculator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .54

Alarm clock. . . . . . . . . . . . . . . . . . . . . . . . . . . . .55

External antenna jack . . . . . . . . . . . . . . . . . . . .56

Nokia Xpress-on™ color covers. . . . . . . . . . . . .57

14. Security features 59

Access codes overview. . . . . . . . . . . . . . . . . . . .59

PIN code. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .60

PIN2 code. . . . . . . . . . . . . . . . . . . . . . . . . . . . .60

Security code. . . . . . . . . . . . . . . . . . . . . . . . . .61

iii

PUK and PUK2 codes . . . . . . . . . . . . . . . . . . . . .61

SIM card security . . . . . . . . . . . . . . . . . . . . . . . .61

Phone security . . . . . . . . . . . . . . . . . . . . . . . . . .62

Fixed dialing. . . . . . . . . . . . . . . . . . . . . . . . . . . .62

15. Optional analog module 64

Attaching the analog module. . . . . . . . . . . . . .64

Removing the analog module. . . . . . . . . . . . . .64

Analog features . . . . . . . . . . . . . . . . . . . . . . . . .65

Digital/analog selection. . . . . . . . . . . . . . . . . . .65

Analog system selection . . . . . . . . . . . . . . . . . .65

Call timers for analog calls. . . . . . . . . . . . . . . .66

Module security/module code. . . . . . . . . . . . . .67

Appendix A: Call forwarding 68

Call forwarding types. . . . . . . . . . . . . . . . . . . . .68

Adding a call type . . . . . . . . . . . . . . . . . . . . . . .69

Adding a timeout. . . . . . . . . . . . . . . . . . . . . . . .70

Appendix B: Accessories 71

Batteries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .72

Chargers and other accessories . . . . . . . . . . . .73

Appendix C: Reference information 77

Important safety information. . . . . . . . . . . . . .77

Emergency calls . . . . . . . . . . . . . . . . . . . . . . . . .79

Radio frequency (RF) signals. . . . . . . . . . . . . . .80

Care and maintenance. . . . . . . . . . . . . . . . . . . .81

Appendix D: Technical information 82 Appendix E: Nokia Limited Warranty 83

1. For your safety

Read these simple guidelines before using your phone. Failure to comply with these guidelines may be dangerous or illegal.

Road Safety Comes First

Don’t use a hand-held phone while driving; park the vehicle first.

Switch Off In Hos pitals

Follow any regulations or rules. Switch phone off near medical equipment.

Switch Off On Aircraft

Wireless phones can cause interference. Using them on aircraft is illegal.

Switch Off When Refueling

Don’t use phone at a refueling point. Don’t use near fuel or chemicals.

Switch Off Near Blasting

Do not use the phone where blasting is in progress. Observe restrictions, and follow any regulations or rules.

Interference

All wireless phones may get interference which could affect performance.

Use Sensibly

Use only in the normal position (to ear). Don’t touch the antenna unnecessarily.

Qualified Service

Only qualified service personnel must install or repair equipment.

Accessories and Batterie s

Use only approved accessories and batteries. Do not connect incompatible products.

FCC/Industry Canada Notice

Your phone may cause TV or radio interference (for example, when using a telephone in close proximity to receiving equipment). The FCC or Industry Canada can require you to stop using your telephone if such interference cannot be eliminated. If you require assistance, contact your local service facility.

This device complies with part 15 of the FCC rules. Operation is subject to the condition that this device does not cause harmful interference.

Using this Guide

The wireless phone described in this guide is approved for use in GSM 1900 and AMPS networks.

Network services

A number of features included in this guide are called network services. They are special services provided by wireless service providers. Before you can take advantage of any of these network services, you must subscribe to the service(s) from your home service provider and obtain instructions for their use.

Updates

The latest version of this Owner’s Manual may be found on Nokia’s World Wide Web site at

www.nokia.com

2. Preparing the ph on e for use

Before you can use your new phone, you need to:

Insert a miniature SIM card (available from your service

provider). Attach and charge the battery.

If you purchased an optional analog module, you should attach it to the phone.

Note: The analog module is a separate accessory that may be purchased from your service provider. It allows you to make and receive calls in analog networks. See ‘Optional analog module’ on page 64.

Inserting the SIM card

The SIM card and its contacts can be easily damaged by scratches or bending, so be careful when you handle, insert, or remove the card.

Note: Keep all miniature SIM cards out of small children’s reach.

Ensure that the phone is off and the battery is not

attached. Open the SIM card holder on

the back of the phone by sliding the latch toward the top of the phone, then lifting it up.

Place the SIM card in the

slot. Make sure that the bevelled corner is at top right and the card’s gold contacts face into the phone.

Close the holder.

Slide the SIM card holder

toward the bottom of the phone until it locks into place.

Attach the battery.

Attaching the battery

To attach the battery, place it on the back of the phone as shown and slide it toward the top of the phone until it clicks into place.

Attaching the battery when using optional analog module

Place the analog module

on the back of the phone.

Slide the module toward

the top of the phone until it clicks into place.

Place the battery on top

of the analog module.

Slide the battery toward

the top of the phone until it clicks into place.

Removing the battery

Note: Switch off the phone before removing the battery!

Press and hold the

button at the top of the battery.

Slide the battery

toward the bottom of the phone.

Lift the battery off the

phone.

Battery charging

Your phone is powered by a rechargeable NiMH or Li-Ion battery. Note that a new NiMH battery’s full performance is achieved only after two or three complete charge and discharge cycles.

How to charge your battery

Connect the lead from the charger to the bottom of your phone or to a charging stand. Then plug the charger into a standard 120V AC outlet.

When the battery is charging, the battery strength indicator (on the right side of the display) scrolls.

Note: When you charge the battery for the first time, the battery strength indicator does not scroll the entire time; this is normal.

Problems charging

If your phone displays Check that the battery is not connected to a non-approved charging device. If the battery is very hot or cold, wait for a while; charging will automatically resume after the battery is restored to its normal operating state. If charging still fails, contact your dealer.

1RW FKDUJLQJ

, charging is suspended.

When is charging complete?

When the charge indicators stop scrolling, your phone is considered fully charged. However, a slight increase in charge may occur if you leave your phone connected to the charger.

When is a good time to charge?

You can charge anytime, but remember that when your phone displays

%DWWHU\ ORZ

, you only have a couple of

minutes of talk time left.

Can I make call s while charging?

Yes, but your battery may not charge during a call. Charging should resume once you end the call.

Discharging NiMH batteries

For good operation times, discharge NiMH batteries from time to time by leaving your phone switched on until it turns itself off (or by using the battery discharge facility of any approved accessory available for your phone). Do not attempt to discharge the battery by any other means.

Important battery information

• The battery can be charged and discharged hundreds of times but it will eventually wear out. When the operating time (talk time and standby time) is noticeably shorter than normal, it is time to buy a new battery.

• Use only batteries approved by the phone manufacturer and recharge your battery only with the chargers approved by the manufacturer. When a charger is not in use, disconnect it from the power source. Do not leave the battery connected to a charger for longer than a week, since overcharging may shorten its life. If left unused a fully charged battery will discharge itself over time.

• Temperature extremes will affect the ability of your battery to charge: allow it to cool down or warm up first.

• Use the battery only for its intended purpose.

• Never use any charger or battery which is damaged or worn out.

• Do not short circuit the battery. Accidental short circuiting can occur when a metallic object (coin, clip, or pen) causes direct connection of the + and - terminals of the battery (metal strips on the back of the battery), for example when you carry a spare battery in your pocket or purse. Short circuiting the terminals may damage the battery or the connecting object.

• Leaving the battery in hot or cold places, such as in a closed car in summer or winter conditions, will reduce the capacity and lifetime of the battery. Always try to keep the battery between 59º F and 77º F (15º C and 25º C). A phone with a hot or cold battery may temporarily not work, even when the battery is fully charged. NiMH batteries’ performance is particularly limited in temperatures below 14º F (-10º C). Li-ion batteries’ performance is particularly limited in temperatures below 32º F (0º C).

• Do not dispose of batteries in a fire!

• Batteries must be recycled or disposed of properly. They must not be disposed of in municipal waste.

3. About the phone, keys & menu

Power key

The power key has several functions:

• To turn the phone on or off, press and hold it.

• When the phone is not attached to a headset or handsfree car kit, you can press it briefly to select a quick alert setting (see page 21).

• To turn the lights on when Keyguard is on, press it briefly.

Nokia Navi™ key

Your phone’s Navi™ key appears below the display. Its current function is indicated by the word that appears above it (for example, press the Navi™ key to perform the function.

Throughout this guide, when you see “press

,” etc., press the Navi™ key when that word appears

/LVWHQ

above it.

Scroll keys

The scroll keys are located to the right of the Navi™ key. Use the scroll keys to browse menus and move the cursor (see page 12) to the right or the left.

0HQX

). Simply

0HQX

,” “press

C key

Use the key to:

• delete a character to the left of the cursor

• clear all characters from the display (press and hold)

• return to the previous menu level

• return fr om the men u to the start screen (press and hol d)

• reject an incoming call

Lights

To turn your phone’s lights on for 15 seconds:

• if Keyguard is off, press any key

• if Keyguard is on, briefly press the key

Start screen

The start screen appears when you first turn on your phone. above the Navi™ ke y so you can a cces s your phone’s menu. Your phone must be at the start screen in order to use many of its features .

To get to the start screen, press and hold for a second.

0HQX

appears

Entering letters and numbers

Cursor

The cursor is a blinking vertical line that appears on the screen when you are entering text or numbers. Characters you enter appear to the right of the cursor. Pressing the

key deletes the character to the left of the cursor. Use

the scroll keys to move the cursor to the right or left.

ABC mode

When your phone is ready for you to enter text, such as a name or message, it switches to ABC mode. The shows that it is in ABC mode.

When pressing the indicated key repeatedly:

is displayed, you can enter these characters by

$%&

Key Characters Key Characters

1 . , ? ! - 1 7 PQRS7 2ABC2 8TUV8 3 DEF3 9 WXYZ9 4 GHI4 0 space, 0 5 JKL5 See ‘Special

characters in names and messages’

$%&

icon

6 MNO6 Changes letter case,

switches between letters and numbers

Changing letter case

Press the key to switch between upper- and lowercase letters. The you are using lower case.

Entering numb ers

To enter numbers while in ABC mode, you can:

• press and hold the corresponding key until the number appears, or

• switch between ABC mode and number mode by pressing and holding the key.

icon switches to

$%&

to indicate that

DEF

Special characters in names and messages

In ABC mode you can press the key to view the special characters below. If your SIM card supports special characters, you can use these characters when saving names in your phone book or when writing text messages. Simply press or to highlight the one you want, then press

8VH

. , ? ! : ; - + # * ( ) ‘ “ _ @ & $ £ % / < > ¿ ¡ § = ¥

Special characters in phone num bers

You can use special characters to dial or save international phone numbers as well as phone numbers of automated services such as bank account information. When entering numbers, press the key repeatedly to use these characters.

Character Use

This character is used to send command

strings to the network. Contact your service provider for details.

This character is a prefix used for dialing

international numbers.

Use this character to save phone numbers of

automated services that require you to enter a password or other information after the call is answered. For example, if your bank’s phone number is 555-1212 and you need to enter your account number (12345) and password (6789), you could save this phone number as

Note: In digital networks, digits to the right of the S are sent after a 2.5-second pause. In analog networks, digits to the right of the S are not sent until you press

This character creates a wait; digits to the

right of the Z are not sent until you press

6HQG

saved.

8884545S45678S9:;<

6HQG

. Currently this character cannot be

Keyguard (locking the keypad)

The Keyguard feature allows you to “lock” your phone’s keypad so that accidental keypresses have no effect. This is handy when your phone is in a pocket or purse.

Note: Keyguard is not a security feature and will not prevent unauthorized use of your phone.

To lock the keys

Press

0HQX

To unlock the keys

Press

8QORFN

Notes about Keyguard

• When Keyguard is on, calls may be possible to the emergency number programmed into your phone (e.g. 911 or other official emergency number). However, onekey emergency dialing (‘the 9 key’) does not operate.

• Keyguard is automatically turned off when the phone is connected to a car kit.

4. Settings

This section describes some phone settings that you probably won’t change very often, and others that allow you to customize your phone to suit your preferences. You can set them now or skip to ‘Basic functions’ on page 24 to get started using your phone.

Automatic redial

Use automatic redial is on, your phone will redial the number you’re trying to call up to 10 times. To stop the call attempts, press

Note: Automatic redial will not redial a busy number while you initiate or answer another call.

Calling card set-up

If you wish to use a calling card for long distance calls, you must first save your calling card information into your phone. Your phone can save information about two calling cards.

Saving calling card information

1 2

3 4

4 1 1 to turn this feature on or off. When

0HQX

or .

4XLW

Press Scroll to the calling card you want to edit, then press

2SWLRQV

Scroll to Enter your security code (see page 61), then press 2..

0HQX

4 1 5.

(GLW

, then press 2..

'LDOLQJ VHTXHQFH

, press

. Press to choose

6HOHFW

the dialing sequence your card uses, then press

6HOHFW

Dialing

sequence

Access number + phone number + card number

Use for cards that

require you to:

Dial 1-800 access number , then phone number, then card number (+ PI N if required)

Cards using

this sequence

MCI, AT&T True Choice, Sprint Canada, Unitel

Access number + card number + phone number

Dial 1-800 access number , then card number (+ PIN if required), then phone

networkMCI, WorldPhone MCI

number

Prefix + phone number + card number

Dial the prefix (any numbers that m ust precede the phone

GTE, PacBell, AT&T, Stentor

number) and phone number you want to dial, then card number (+ PIN if required)

Note: The order of the following steps may vary, depending on which dialing sequence your card uses.

Enter access number (usually the 1-800 number listed

on the back of the calling card), then press 2.. Enter your card number and/or PIN, then press 2.. Your

phone will display Press to reach

6DYH FKDQJHV"

&DUG QDPH

Press 2..

, then press

6HOHFW

. Enter

the card name using your phone’s keypad, then press 2..

Note: This procedure might not work with all calling cards. Please look at the back of your calling card or contact your long distance company for more information.

Choosing a call ing card to use

Use required to enter your security code.

4 1 5 to select a calling card to use. You will be

0HQX

Making calling card calls

See ‘Calling card calls’ on page 34.

Clock

Your phone has an internal clock that can be displayed on the start screen. The clock must be set for call times to be recorded (see ‘Call log’ on page 41).

Selecting time format

Use

Setting the clock

Use both hours and minutes (for example, enter 1:30 as the clock’s time format is set to choose DP or SP.

Displaying or hiding the clock

Press if it is currently hidden, or vice versa.

8 2 3 to set the clock’s format to

0HQX

8 2 2 to enter the current time. Use two digits for

0HQX

DP2SP

8 2 1 to display the clock on the phone’s screen

0HQX

570KRXU

, you will be asked to

3463

DP2

). If

Language

Use your phone’s display.

The shortcut for choosing English is to press

4 3 1 to set the language of

0HQX

4311.

0HQX

Lights

If you’re using your phone with a car kit, use set your phone’s lights to 2Q (lights stay on) or (after 15 seconds, lights turn off until the next key is pressed, phone rings, etc.).

For information about turning your phone’s lights on at any time, see page 9.

0HQX

$XWRPDWLF

4 3 7 to

Send own number

Use you to display your phone number to the person you are calling. This feature is only effective when calling a number that is equipped with Caller ID.

3UHVHW

your service provider to find out what the default is.

2II

call.

4 1 3 to access this network service, which allows

0HQX

uses the default network setting (on or off). Contact

displays your number to people you call.

prevents your number from being shown to people you

System selection

Use system (network) if more than one is available. Your selection remains active until you change it or change the SIM card.

If you choose available system. The phone beeps when it switches to a different system.

If you choose available systems. Scroll to the one you want, then press

6HOHFW

result. If you lose connection while in Manual mode, the phone prompts you to select a system again.

For information on analog system selection, see ‘Analog system selection’ on page 65.

4 3 5 to tell your phone how to choose a PCS

0HQX

$XWRPDWLF

0DQXDO

. The phone requests registration and displays the

, the phone automatically selects an

, the phone searches for and displays

Tones

Use ringing option, ringing tone, ringing volume, message alert tone, keypad tones, and warning tones.

The quick alert settings feature (see page 21) allows you to quickly select a fixed combination of these settings to suit your current environment, whether you are at a soccer game or in a library.

Ringing option

Use have a call.

5LQJ

ringing tone.

$VFHQGLQJ

ringing tone. The ringing volume starts low and increases with successive rings.

5LQJ RQFH

ringing tone.

%HHS RQFH

6LOHQW

the start screen.

Ringing tone

Your phone plays a ringing tone when someone calls you and the ringing option is set to

RQFH

to a tone to hear how it sounds.

Note: If the ringing option is set to play sample tones.

9 to change the six sound settings in your phone:

0HQX

9 1 to tell your phone how to notify you that you

0HQX

The phone rings normally using the currently selected

The phone rings using the currently selected

The phone rings once using the currently selected

The phone beeps once.

The phone makes no sound. The icon appears at

. Use

9 2 to choose one of 35 ringing tones. Scroll

0HQX

5LQJ, $VFHQGLQJ

6LOHQW

, or

5LQJ

, the phone won’t

+ 67 hidden pages

Nokia 5190 User Manual

Keys

Quick guide to functions

Phone menu shortcuts

Contents

FCC/Industry Canada Notice

Using this Guide

Inserting the SIM card

Attaching the battery

Removing the battery

Battery charging

Important battery information

Power key

Nokia Navi™ key

Scroll keys

C key

Lights

Start screen

Menu

Entering letters and numbers

Keyguard (locking the keypad)

Automatic redial

Calling card set-up

Clock

Language

Lights

Send own number

System selection

Tones