Nokia 5160i User Manual

Download

Keys

Earpiece

See p. 15.

Current function of Navi™ key

Navi™ key

See p. 6.

Clear key

See p. 7.

Voice mail key

See p. 23.

Power key

See p. 6.

0HQX

Fixed-length antenna

See p. 14.

Do not attempt to extend or remove!

Screen

Scroll keys

See p. 6.

Number key

See p. 11.

Emergency 9 key

See p. 26.

Indicators and icons

You have an active call.

You have one or more new voice messages.

You have one or more new text messages.

Keyguard is on. Your phone will not accept any keypresses. To turn it off, press

The alarm clock is set.

Unlock

, then .

The ringing option is set to

Digital service is available.

Your phone is roaming outside its home system.

The phone is ready for you to enter a response.

Characters entered will be upper-case letters. Press the key to switch letter case.

Characters entered will be lower-case letters. Press the key to switch letter case.

Characters entered will be numbers. (When entering letters, switch to numbers by pressing and holding the key.)

You are in “special character” mode; select a character, then press to special characters by pressing the key.)

. (When entering letters, switch

Use

Silent

1. For your safety 1

FCC/Industry Canada Notice . . . . . . . . . . . . . . . . 2

Using this Guide . . . . . . . . . . . . . . . . . . . . . . . . . . 2

2. Battery installation and charging 3

Attaching the battery . . . . . . . . . . . . . . . . . . . . . . 3

Battery charging . . . . . . . . . . . . . . . . . . . . . . . . . . 3

Removing the battery . . . . . . . . . . . . . . . . . . . . . . 4

Important battery information. . . . . . . . . . . . . . . 5

3. About the phone, keys and menu 6

Power key. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Nokia Navi™ key . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Scroll keys . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Clear key . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Lights . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

External antenna jack . . . . . . . . . . . . . . . . . . . . . . 7

Start screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Entering letters and numbers. . . . . . . . . . . . . . . 11

Special characters in names . . . . . . . . . . . . . .12

Special characters in phone numbers . . . . . .12

Keyguard (locking the keypad) . . . . . . . . . . . . . .13

4. Basic functions 14

Turning the phone on or off . . . . . . . . . . . . . . . .14

About the antenna . . . . . . . . . . . . . . . . . . . . . . . 14

Checking signal strength . . . . . . . . . . . . . . . . . . 14

Making a call . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

Volume adjustment (earpiece) . . . . . . . . . . . . . . 15

Muting the microphone . . . . . . . . . . . . . . . . . . .15

Ending a call . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

Last number redial . . . . . . . . . . . . . . . . . . . . . . . 16

Saving a name and number . . . . . . . . . . . . . . . . 16

Finding a name and number . . . . . . . . . . . . . . . 16

Answering a call . . . . . . . . . . . . . . . . . . . . . . . . .16

Silencing an incoming call . . . . . . . . . . . . . . . . .17

5. Settings 18

Automatic redial . . . . . . . . . . . . . . . . . . . . . . . . .18

Calling card set-up . . . . . . . . . . . . . . . . . . . . . . .18

Clock. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20

Language . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

Lights . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21

Tones . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

Quick alert settings . . . . . . . . . . . . . . . . . . . . .23

Voice mailbox number . . . . . . . . . . . . . . . . . . . .23

Voice privacy . . . . . . . . . . . . . . . . . . . . . . . . . . . .24

Welcome note . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

6. Emergency calls 25

Emergency key 9 . . . . . . . . . . . . . . . . . . . . . . . . .26

7. Advanced functions 27

Network feature setting . . . . . . . . . . . . . . . . . . .27

Adding feature activation codes

to the menu . . . . . . . . . . . . . . . . . . . . . . . . . . .27

Adding feature cancellation codes

to the menu . . . . . . . . . . . . . . . . . . . . . . . . . . .27

In-call menu . . . . . . . . . . . . . . . . . . . . . . . . . . . .28

Making/receiving multiple calls . . . . . . . . . . . . .28

Call forwarding . . . . . . . . . . . . . . . . . . . . . . . . . . 30

1-touch dialing . . . . . . . . . . . . . . . . . . . . . . . . . . 31

Choosing your phone number

(NAM selection). . . . . . . . . . . . . . . . . . . . . . . . . .32

Send own number . . . . . . . . . . . . . . . . . . . . . . . .32

Calling card calls . . . . . . . . . . . . . . . . . . . . . . . . .33

System selection . . . . . . . . . . . . . . . . . . . . . . . . .33

Automatic answer . . . . . . . . . . . . . . . . . . . . . . . .34

Touch tones . . . . . . . . . . . . . . . . . . . . . . . . . . . . .34

Restore factory settings . . . . . . . . . . . . . . . . . . . 35

8. Phone book 36

Saving names and numbers . . . . . . . . . . . . . . . .36

Finding names and numbers . . . . . . . . . . . . . . .37

Editing names and numbers. . . . . . . . . . . . . . . . 38

Erasing names and numbers. . . . . . . . . . . . . . . . 38

Scrolling view . . . . . . . . . . . . . . . . . . . . . . . . . . .38

Checking available memory . . . . . . . . . . . . . . . .38

9. Call log 39

Missed calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . .39

Received calls . . . . . . . . . . . . . . . . . . . . . . . . . . . 40

Dialed calls. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .40

Clearing call lists . . . . . . . . . . . . . . . . . . . . . . . . .40

Call timers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40

10. Voice mes sages 42

Saving your voice mailbox number . . . . . . . . . . 42

Listening to new voice messages. . . . . . . . . . . .42

Calling your voice mailbox at any time. . . . . . .42

11. Text messages 43

Reading messages . . . . . . . . . . . . . . . . . . . . . . . . 43

Storage of incoming messages . . . . . . . . . . . . .44

Erasing all text messages . . . . . . . . . . . . . . . . . .44

Writing and sending text messages. . . . . . . . . . 45

Forwarding and replying to a message . . . . . . . 46

12. Extra features 48

Alarm clock . . . . . . . . . . . . . . . . . . . . . . . . . . . . .48

Games . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .49

13. Security features 51

Access codes overview . . . . . . . . . . . . . . . . . . . . 51

Lock code . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51

Security code . . . . . . . . . . . . . . . . . . . . . . . . . . 51

Restricting calls . . . . . . . . . . . . . . . . . . . . . . . . . . 51

Phone lock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53

iii

14. Accessories 55

Nokia Xpress-on™ colour covers . . . . . . . . . . . .55

Batteries. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .58

Chargers and other accessories . . . . . . . . . . . . .59

15. Reference information 63

Important safety information. . . . . . . . . . . . . . .63

Emergency calls. . . . . . . . . . . . . . . . . . . . . . . . . .65

Radio frequency (RF) signals . . . . . . . . . . . . . . .66

Care and maintenance . . . . . . . . . . . . . . . . . . . . 67

16. Technical information 68

17. NOKIA 1-YEAR LIMITED WARRANTY 69

18. Index 72

1. For your safety

Read these simple guidelines before using your phone. Failure to comply with these guidelines may be dangerous or illegal.

Road Safety Comes First

Don’t use a hand-held phone while driving; park the vehicle first.

Switch Off In Hospitals

Follow any regulations or rules. Switch phone off near medical equipment.

Switch Off On Aircraft

Wireless phones can cause interference. Using them on aircraft is illegal.

Switch Off When Refueling

Don’t use phone at a refueling point. Don’t use near fuel or chemicals.

Switch Off Near Blasting

Do not use the phone where blasting is in progress. Observe restrictions, and follow any regulations or rules.

Interference

All wireless phones may get interference which could affect performance.

Use Sensibly

Use only in the normal position (to ear). Don’t touch the antenna unnecessarily.

Qualified Service

Only qualified service personnel must install or repair equipment.

Accessories and Batteries

Use only approved accessories and batteries. Do not connect incompatible products.

FCC/Industry Canada Notice

Your phone may cause TV or radio interference (for example, when using a telephone in close proximity to receiving equipment). The FCC or Industry Canada can require you to stop using your telephone if such interference cannot be eliminated. If you require assistance, contact your local service facility.

This device complies with part 15 of the FCC rules. Operation is subject to the condition that this device does not cause harmful interference.

Using this Guide

The wireless phone described in this guide is approved for use in TDMA and AMPS networks.

Network services

A number of features included in this guide are called network services. They are special services provided by wireless service providers. Before you can take advantage of any of these network services, you must subscribe to the service(s) from your home service provider and obtain instructions for their use.

Updates

The latest version of this Owner’s Manual may be found on Nokia’s World Wide Web site at

www.nokia.ca

2. Battery installation and charging

Before you can use your new phone, you need to attach and charge the battery.

Attaching the battery

To attach the battery, place it on the back of the phone as shown and slide it toward the top of the phone until it clicks into place.

Battery charging

Your phone is powered by a rechargeable NiMH or Li-Ion battery. Note that a new NiMH battery’s full performance is achieved only after two or three complete charge and discharge cycles. For charging times, see ‘Charging times’ on page 58.

How to charge your battery

Connect the lead from the charger to the bottom of your phone or to a charging stand. Then plug the charger into a standard wall outlet.

When the battery is charging, the battery strength indicator on the right side of the display scrolls.

Note: When you charge the battery for the first time, the battery strength indicator will not scroll the entire time; this is normal.

Problems charging

If your phone displays Check that the battery is connected to an approved charging device. If the battery is very hot or cold, wait for a

Not charging

, charging is suspended.

while; charging will automatically resume after the battery is restored to its normal operating state. If charging still fails, contact your dealer.

When is charging complete?

When the charge indicators stop scrolling, your phone is considered fully charged. However, a slight increase in charge may occur if you leave your phone connected to the charger.

When is a good time to charge?

You can charge anytime, but remember that when your phone displays minutes of talk time left.

Battery low

, you only have a couple of

Can I make calls while charging?

Yes, but depending on the charger used, your battery may not charge during a call.

Discharging NiMH batteries

For good operation times, discharge NiMH batteries from time to time by leaving your phone switched on until it turns itself off (or by using the battery discharge facility of any approved accessory available for your phone). Do not attempt to discharge the battery by any other means.

Removing the battery

Note: Switch off the phone before removing the battery!

Press and hold the

button at the top of the battery.

Slide the battery toward

the bottom of the phone.

Lift the battery off the

phone.

Important battery information

• Note that a new battery’s full performance is achieved only after

two or three complete charge and discharge cycles!

• The battery can be charged and discharged hundreds of times

but it will eventually wear out. When the operating time (talk time and standby time) is noticeably shorter than normal, it is time to buy a new battery.

• Use only batteries approved by the phone manufacturer and

recharge your battery only with the chargers approved by the manufacturer.

• When a charger is not in use, disconnect it from the power

source. Do not leave the battery connected to a charger for longer than a week, since overcharging may shorten its life. If left unused a fully charged battery will discharge itself over time.

• (NiMH batteries only) For good operation times, discharge the

battery from time to time by leaving your phone switched on until it turns itself off (or by using the battery discharge facility of any approved accessory available for your phone). Do not attempt to discharge the battery by any other means.

• Temperature extremes will affect the ability of your battery to

charge: allow it to cool down or warm up first.

• Use the battery only for its intended purpose.

• Never use any charger or battery which is damaged or worn out.

• Do not short circuit the battery. Accidental short circuiting can

occur when a metallic object (coin, clip, or pen) causes direct connection of the + and - terminals of the battery (metal strips on the back of the battery), for example when you carry a spare battery in your pocket or purse. Short circuiting the terminals may damage the battery or the connecting object.

• Leaving the battery in hot or cold places, such as in a closed car

in summer or winter conditions, will reduce the capacity and lifetime of the battery. Always try to keep the battery between 59º F and 77º F (15º C and 25º C). A phone with a hot or cold battery may temporarily not work, even when the battery is fully charged. NiMH batteries’ performance is particularly limited in temperatures below 14º F (-10º C). Li-Ion batteries’ performance is particularly limited in temperatures below 32º F (0º C).

• Do not dispose of batteries in a fire!

• Dispose of used batteries in accordance with any local

regulations.

3. About the phone, keys and menu

Power key

You can use the power key to:

• turn the phone on or off (press and hold)

• turn the phone’s lights on for 15 seconds

• select a quick alert setting (see page 23) (if Keyguard is off and the phone is not connected to a headset or handsfree car kit)

• silence the ringing of an incoming call

Nokia Navi™ key

Your phone’s Navi™ key appears below the display. Its current function is indicated by the word that appears above it (for example, press the Navi™ key to perform the function.

Throughout this guide, when you see “press

,” etc., press the Navi™ key when that word appears

Listen

above it.

Scroll keys

The scroll keys are located to the right of the Navi™ key. Use the scroll keys to:

• browse menus

• move the cursor (see page 11) to the right or the left

• adjust the earpiece volume while in a call

• access your phone book (press from the start screen)

• access the dialed calls list (press from the start screen)

). Simply

,” “press

Clear key

Use the clear key to:

• delete a character to the left of the cursor

• clear all characters from the display (press and hold)

• return to the previous menu level

• return from the menu to the start screen (press and hold)

• access the in-call menu while in a call

Lights

To turn your phone’s lights on for 15 seconds:

• if Keyguard is off, press any key

• if Keyguard is on, you must press the key briefly (this conserves battery power by keeping the lights from turning on when the phone is in a pocket or purse)

For information about controlling your phone’s lights when the phone is in a car kit, see page 21.

External antenna jack

At the back of the phone, below the antenna, there is a connector for an external antenna. The connector may be protected by a rubber cap. Remove the cap before connecting an external antenna. After removing the antenna, replace the cap.

Note: Keep the cap out of the reach of small children.

Start screen

The start screen appears when you first turn on your phone. above the Navi™ key so you can access your phone’s menu. Several features can be used only when the phone is at the start screen.

appears

To get to the start screen, press and hold for a second. (If there are characters on the display this clears the characters, then you must press and hold again.)

Entering letters and numbers

Cursor

The cursor is a blinking vertical line that appears on the screen when you are entering text or numbers. Characters you enter appear to the right of the cursor. Pressing the key deletes the character to the left of the cursor. Use the scroll keys to move the cursor to the right or left .

ABC mode

When your phone is ready for you to enter text, such as a name or message, it switches to ABC mode. The icon shows that it is in ABC mode.

When is displayed, you can enter these characters by pressing the indicated key repeatedly:

Key Characters Key Characters

1. , ? ! - 17PQRS7

2ABC2 8TUV8

3 DEF3 9 WXYZ9

4GHI4 0space, 0

5 JKL5 See ‘Special characters

6 MNO6 Changes letter case,

in names’ on page 12.

switches between letters and numbers

Changing letter case

Press the key to switch between upper- and lower-case letters. The icon switches to to indicate that you are using lower case.

Entering numbers

To enter numbers while in ABC mode, you can:

• press and hold the corresponding key until the number appears, or

• switch between ABC mode and number mode by pressing and holding the key.

Special characters in names

In ABC mode you can press the key to view the special characters below. You can use these characters when saving names in your phone book. Simply press or to highlight the one you want, then press

. , ? ! : ; - + # * ( ) ‘ “ _ @ & $ % / < > ¿ ¡ =

To choose a character that appears near the end

Tip:

of the list, immediately press to go to the end of the list.

Use

Special characters in phone numbers

You can use special characters to dial or save phone numbers of automated services such as bank account information. When entering numbers, press the key repeatedly until you see the character you want.

Character Use

This character is used to request services

from the network. Contact your service provider for details.

This character is not currently used.

This character creates a

right of the p are sent as touch tones after a

2.5-second pause.

Use this character to save phone numbers of automated services that require you to enter a password or other information after the call is answered. For example, if your voice mail number at work is 555-1212 and you need to enter your extension (1234) and then a password (5678) in order to listen to your messages, you could save this phone number as

5551212p1234p5678

This character creates a

similarly to the pause character except that digits to the right of the w are not sent until you press

Send

pause

wait

. It works

. Digits to the

Keyguard (locking the keypad)

The Keyguard feature allows you to “lock” your phone’s keypad so that accidental keypresses have no effect. This is handy when your phone is in a pocket or purse.

Note: Keyguard is not a security feature and will not prevent unauthorized use of your phone.

To lock the keys

Press

To unlock the keys

Press

Notes about Keyguard

• When Keyguard is on, the only way to answer a call is to

• When Keyguard is on, calls may be possible to the

• Keyguard is automatically turned off when the phone is

9 or

Unlock

press

Answer

emergency number programmed into your phone (e.g. 911 or other official emergency number). However, one-touch emergency dialing (‘emergency key 9’) does not operate.

connected to a car kit.

4. Basic functions

Turning the phone on or off

Press and hold the key for one second.

Note: If the phone asks for a lock code, see ‘Lock code’ on page 51. If the phone asks for a security code, see ‘Security code’ on page 51.

WARNING! Do not switch on the phone when wireless phone use is prohibited or when it may cause interference or danger.

About the antenna

Your Nokia phone has a fixed-length antenna. Do not attempt to extend or remove it.

Normal position

Hold the phone as you would any other telephone, with the antenna pointed up and over your shoulder.

Tips on efficient operation

As with any other radio transmitting device, do not touch the antenna unnecessarily when the phone is switched on. Contact with the antenna affects call quality and may cause the phone to operate at a higher power level than otherwise needed.

Checking signal strength

Your phone operates on radio waves. Radio signal coverage is maintained by a wireless network, and the quality of calls on your phone depends on the strength of the wireless radio signal.

Get a strong signal

When you are at the start screen (see page 7) or in a call, the strength of the radio signal is indicated by the signal indicators on the left side of your phone’s display. These indicators scroll as the signal strength increases and decreases.

To improve your phone’s reception, try moving your phone slightly. If you’re inside a building, move toward a window.

Making a call

Enter the area code and phone

number. (

Press

Call

party to answer.

changes to

and wait for the other

Call

Volume adjustment (earpiece)

To adjust the earpiece volume, press or during a call. If an accessory with its own loudspeaker is connected to your phone, the scroll keys will adjust the volume for that accessory.

Muting the microphone

When you are in a call, you can mute the phone’s microphone by pressing , pressing selecting press

Note: For more information about the in-call menu, see page 28.

. To unmute the microphone, press ,

Mute

Options

, and select

Unmute

Options

, and

Ending a call

Press

End

Last number redial

The last 10 numbers you dialed are stored in the dialed calls list. Use this list to redial a number you have called recently.

From the start screen, press to access the dialed

calls list.

Scroll to the desired number.

Press

Call

Saving a name and number

See ‘Saving names and numbers’ on page 36.

Finding a name and number

Press to access your phone book.

Scroll to the number you want. (To skip ahead quickly in

the list, press the number key that corresponds to the first letter of the name.)

Press

For other ways to find names and numbers, see ‘Finding names and numbers’ on page 37.

Call

Answering a call

When someone calls, the phone will alert you (see ‘Tones’ on page 21) and call, press any key except .

Note: To prevent accidental answering when the phone is in a pocket or purse, the phone will not answer the call if you press the key for longer than one second.

For information on setting your phone to answer incoming calls automatically, see ‘Automatic answer’ on page 34.

will flash on the display. To answer the

Call

Caller ID

Caller ID is a network service that can display the name and phone number of the person calling you, if the information is available. Contact your service provider for details.

If the caller can be identified, the phone may display the caller's name and phone number. The information displayed depends on the information available through the network and your phone book. It is possible that only the name or the number will appear.

Call - caller ID unavailable

network does not recognize the calling number. Also,

caller ID blocked

blocked caller ID.

may display if the calling party has

will display when the wireless

Call -

Silencing an incoming call

To silence the ringing of an incoming call, press briefly.

5. Settings

This section describes some phone settings that allow you to customize your phone to suit your preferences and that you probably won’t change very often.

Automatic redial

Use feature is on and the wireless network is busy, your phone will redial a number up to three times. This feature will not redial to a busy phone number.

To stop the call attempts, press

Calling card set-up

If you wish to use a calling card for long distance calls, you must first save your calling card information into your phone. Your phone can save information about two calling cards.

To learn how to make calling card calls, see ‘Calling card calls’ on page 33.

Saving calling card information

4 1 2 to turn this feature on or off. When this

or .

Quit

Press

Scroll to the desired calling card, then press

Scroll to

Enter your security code (see page 51), then press OK.

At the dialing sequence your card uses, then press

4 1 3.

, then press OK.

Edit

Dialing sequence

, press

. Press to choose

Select

Options

Select

Dialing

sequence

Access no. + phone no. + card no.

Access no. + card no. + phone no.

Prefix + phone no. + card no.

Note: The order of the following steps may vary, depending on which dialing sequence your card uses.

Enter access number (usually the 1-800 number listed

on the back of the calling card), then press OK.

Enter your card number and/or PIN, then press OK. Your

phone will display

Press to reach

the card name using your phone’s keypad, then press OK.

Note: This procedure might not work with all calling cards. Please look at the back of your calling card or contact your long distance company for more information.

Use for cards that

require you to:

Dial 1-800 access number, then phone number, then card number (+ PIN if required)

Dial 1-800 access number, then card number (+ PIN if required), then phone number

Dial the prefix (any numbers that must precede the phone number) and phone number you want to dial, then card number (+ PIN if required)

Save changes?

Card name

Press OK.

, then press

Cards using

this sequence

MCI, AT&T True Choice, Sprint Canada, Unitel

networkMCI, WorldPhone MCI

GTE, PacBell, AT&T, Stentor

. Enter

Select

Choosing a calling card to use

To select a calling card to use, press card you want, then press press OK. Enter your security code, then press OK.

Options. Select

4 1 3, scroll to the

is highlighted;

Clock

Your phone has an internal clock that can be displayed on the start screen. The clock must be set in order for call times to be recorded (see ‘Call log’ on page 39).

If you remove the battery for longer than a couple of seconds, the time will be lost. The next time you turn on the phone, you will be asked to enter the time.

Selecting time format

Use

Setting the time

Use both hours and minutes (for example, enter 1:30 as If the clock’s time format is set to to choose am or pm.

Note: The key does not work on this screen. If you make a mistake, re-enter all four digits.

Displaying or hiding the clock

Press if it is currently hidden, or vice versa.

When the clock is displayed and the time format is set to square will appear next to the time indicating a.m. or p.m.

7 2 3 to set the clock’s format to

7 2 2 to enter the current time. Use two digits for

7 2 1 to display the clock on the phone’s screen

, a black

am/pm

24-hour

, you will be asked

am/pm

36=48 36=48

am/pm

0130

3:15 a.m. 3:15 p.m.

Language

Use your phone’s display. You can choose from English, French, Spanish, and Portuguese.

The shortcut for choosing English is to press

4 2 2 to set the language of

42 21.

Lights

If you’re using your phone with a car kit, use set your phone’s lights to On (lights stay on) or (after 15 seconds, lights turn off until the next key is pressed, phone rings, etc.).

For information about turning your phone’s lights on at any time, see page 7.

4 2 4 to

Automatic

Tones

Use Menu 8, My tones, to change the six sound settings in your phone: ringing option, ringing tone, ringing volume, message alert tone, keypad tones, and warning and game tones.

The quick alert settings feature (see page 23) allows you to select a fixed combination of these settings to suit your current environment.

Ringing option

Use have a call.

Note: If you choose will only sound a quiet beep.

Ring

ringing tone.

Ascending

ringing tone. The ringing volume starts low and increases with successive rings.

Ring once

selected ringing tone.

Beep once

Silent

The icon appears at the start screen.

8 1 to tell your phone how to notify you that you

Beep once

The phone rings normally using the currently selected

The phone rings using the currently selected

The phone rings once using the currently

The phone beeps once.

The phone makes no sound when you receive a call.

, the alarm clock

Silent

Ringing tone

Your phone plays a ringing tone when someone calls you and the ringing option is set to

. Use

once

Scroll to a tone to hear how it sounds.

Note: If the ringing option is set to phone won’t play sample tones.

8 2 to choose one of 30 ringing tones.

Ring, Ascending

Silent

Beep once

, or

Ring

, the

Ringing volume

Use your phone’s ringing and of message alert tones.

Note: If your phone does not ring loudly enough at maximum volume, try a different ringing tone; some tones are louder than others.

8 3 to control the volume of

Message alert tone

Use text message. Scroll to a tone to hear how it sounds.

8 4 to choose the tone played when you receive a

Keypad tones

Use makes when you press its keys.

8 5 to adjust the volume of the tones your phone

Warning and game tones

Use on or off. Warning tones are created by events such as confirmations, errors, power on, battery low, and recharge battery.

8 6 to turn your phone’s warning and game tones

Vibrating alert

If your phone has a vibrating battery attached, use 7 to set your phone to vibrate when you receive a voice call. If you turn vibrating alert on, your phone will vibrate even if its ringing option is set to

Note: The vibrating battery does not vibrate when your phone is connected to or placed in any charging device.

Silent

Quick alert settings

You can quickly adjust your phone’s sound settings when you go into a meeting, go outdoors, etc. To choose a quick alert setting, briefly press the key, scroll to the setting you want, then press OK.

Instead of using the scroll keys, you can press the

Tip:

key repeatedly to scroll through this menu. After you

reach the setting you want, press and hold the key.

Note: If you choose only sound a quiet beep.

My tones

tones.

Silent

Quiet

text message. Other tones are turned off.

Loud

Headset

connected to a headset. Remembers any changes you make to settings in Menu 8, My tones, and uses them the next time you connect the phone to a headset.

Car

to a car kit. Remembers any changes you make to settings in Menu 8, My tones, and uses them the next time you connect the phone to a car kit.

Note: If the chosen and you change a setting in Menu 8, My tones, the phone switches the current quick alert setting to

Uses the settings you have made in Menu 8, My

All sound is turned off.

Your phone beeps once when you receive a call or

Your phone rings loudly. Other tones are not affected.

Automatically selected when your phone is

Automatically selected when your phone is connected

Silent, Quiet

Silent

Quiet

, or

quick alert setting is

Loud

, the alarm clock will

My tones

Voice mailbox number

If you have a voice mail subscription, use save the voice mailbox number given to you by your service provider. This number may be up to 32 digits long. Once you save your voice mailbox number, you can press and hold the

key to dial your voice mailbox. (You can also press briefly and then press

Call

2 2 2 to

For more information on voice mail, see ‘Voice messages’ on page 42.

Voice privacy

Available only in digital networks, voice privacy encrypts the voice channel so it is more difficult for anyone to eavesdrop on your conversations. Use on or off.

This feature may not be available in all areas; contact your service provider for details. If voice privacy becomes inactive, the phone beeps and displays

4 4 1 to turn voice privacy

Voice privacy not active

Welcome note

Use welcome note for your phone. This note is displayed briefly each time you turn on your phone. It can be your name, a reminder, etc. To save the note, press

Options

2 3 to create or change the

, then

Options

, then

Erase

. To erase the note, press

Save

6. Emergency calls

If the phone is not on, switch it on.

Press and hold the key for several seconds to

ready the phone for calls.

Key in the emergency number for your present location

(e.g. 911 or other official emergency number). Emergency numbers vary by location.

Press

IMPORTANT!

This phone, like any wireless phone, operates using radio signals, wireless and landline networks as well as userprogrammed functions which cannot guarantee connection in all conditions. Therefore you should never rely solely upon any wireless phone for essential communications (e.g. medical emergencies).

Remember, to make or receive any calls the phone must be switched on and in a service area with adequate signal strength. Emergency calls may not be possible on all wireless phone networks or when certain network services and/or phone features are in use. Check with local service providers.

If certain features are in use (Keyguard, call restrictions, etc.), you may first need to turn those features off before you can make an emergency call. Consult this document and your local cellular service provider.

When making an emergency call, remember to give all the necessary information as accurately as possible. Remember that your wireless phone may be the only means of communication at the scene of an accident - do not cut off the call until given permission to do so.

Call

Emergency key 9

Use on, the phone attempts to make an emergency call when you:

• press and hold the 9 key, or

• press 9, then press

Note: When Keyguard is active, the only way to make an emergency call is to dial the emergency number, then press

Call

IMPORTANT!

Official emergency numbers (for example, 911) vary by location. Only one number is dialed automatically by Emergency Key 9, and it might not be the proper number in all circumstances.

4 1 1 to turn on this feature. When this feature is

Call

7. Advanced functions

Network feature setting

Call forwarding, call waiting, and send own number are network services available through your service provider. These features do not appear in your phone’s

menu until you save the related feature code(s)

services

given to you by your service provider. After you save the feature activation or cancellation code, the feature appears in the phone’s menu and you can use the menu to turn the feature on or off.

Note: Feature codes can be saved only when your primary phone number (NAM 1) is selected. See page 32.

Adding feature activation codes to the menu

To save a feature activation code, press

Feature code:

then press OK. Scroll to the feature that the code applies to, then press one of the four types of call forwarding.) Finally, scroll to

Activate

prompt, enter the feature activation code,

. (If the feature is call forwarding, choose

Select

, then press OK.

will now appear in the menu for that feature.

Adding feature cancellation codes to the menu

To save a feature cancellation code, press

Feature code:

then press OK. Scroll to the feature that the code applies to, then press one of the four types of call forwarding.) Finally, scroll to

Cancel

prompt, enter the feature cancellation code,

. (If the feature is call forwarding, choose

Select

, then press OK.

will now appear in the menu for that feature.

Network

4 4 2. At the

In-call menu

When you are in a call, the function of the Navi™ key is However, your phone has an in-call menu that allows you to perform several functions while in a call. To use the in-call menu, press while you are in a call, then press Press to scroll to the first item in the menu, or to scroll to the last item in the menu.

The in-call menu is:

Answer Swap New call End Phone book Menu Touch tones Mute/End mute

answer a waiting call switch between two calls make a call when you have one in progress end all calls access the phone book access your phone’s menu send touch tones mute/unmute the phone’s microphone

End

Options

Making/receiving multiple calls

Making a new outgoing call

While you are in a call, select menu. Enter the number (or press number in the phone book), then press automatically put on hold while you are in your new call.

Note: This feature might not be supported in your network. Contact your service provider for details.

New call

from the in-call

to locate the

. The first call is

Call

Three-way calling

Note: This feature might not be supported in your network or might work differently than described. For more information, contact your service provider.

To create a three-way call, call the first person. Then select

from the in-call menu, enter or find the phone

New call

number of the second person, press OK and then press The first person is put on hold. After the second person answers, choose three of you can talk to each other at the same time.

Connect all

from the in-call menu. Now all

Call

Ending calls

Press

Note: The wireless network does not support ending individual calls when more than one call is in progress.

End

or select

from the in-call menu.

End

Call waiting

Call waiting is a network service that allows you to receive an incoming call when you’re already in a call. Contact your service provider for details.

Answering a waiting call

Note: Call waiting is a network service that requires a subscription from your service provider.

If you are in a call with someone and another person calls you, the function of the Navi™ Key changes from

. Press

Options

selected. Press OK.

Answer

Swapping between calls

When you are in a call and you receive an indication of a waiting call, select call will be put on hold. To swap back to the first call, select

from the in-call menu.

Swap

Cancelling call waiting: standard method

To cancel call waiting before making a call, you must get the call waiting cancellation code from your service provider.

Dial the code for cancelling call waiting followed by the

phone number you want to call.

Press

Example: If the code for cancelling call waiting is #43# and the number you want to call is (416) 555-1234, dial

#43#4165551234

Call

. The in-call menu appears with

Options

from the in-call menu. Your first

Answer

, then press

Call

End

Cancelling call waiting: menu method

You can save the code for cancelling call waiting given by your service provider and then use the cancel call waiting. See ‘Adding feature cancellation codes to the menu’ on page 27.

4 4 4 2 to

Call forwarding

Call forwarding is a network service that lets you forward your incoming calls to another phone number. Check with your service provider for details and feature codes.

Activating call forwarding

Standard method

To activate call forwarding, you must get the call forwarding activation code from your service provider.

Dial the code for activating call forwarding followed by the

phone number to which you want to forward your calls.

Press

Example: If the call forwarding activation code is *21* and the number you want to forward calls to is (416) 555-1234, dial

Menu method

You can save the code for activating call forwarding and then use the menu to activate call forwarding. See ‘Adding feature activation codes to the menu’ on page 27.

Call

*21*4165551234

, then press

Call

Cancelling call forwarding

Standard method

To cancel call forwarding, you must get the call forwarding cancellation code from your service provider.

Dial the code for cancelling call forwarding (for example,

#21#).

Press

Call

Menu method

You can save the code for cancelling call forwarding and then use the menu to cancel call forwarding. See ‘Adding feature cancellation codes to the menu’ on page 27.

1-touch dialing

This feature allows you to make phone calls quickly and easily with the touch of a button. Once you have assigned a phone number to a number key (2 through 8), you can press and hold that key to dial the number. (You can also press the number key briefly and then press

Note: Keys 1 and 9 are used exclusively for dialing your voice mailbox and for attempting emergency calls, respectively (see ‘Voice messages’ on page 42 and ‘Emergency calls’ on page 25).

Assigning numbers to keys

Before you can assign a phone number to a key, the phone number must be saved in your phone book (see page 16). Then follow the steps below.

Press

Scroll to the desired key, then press

Press or to choose the name you want to assign

to the selected key, then press

If a key already has a number assigned to it, you can press

Options

assignment.

1 6.

and then view, change, or erase the number

Call

Select

Assign

Making calls using one-touch dialing

Press and hold a number key (2 through 8) for a few seconds to call the number assigned to it. Your phone finds the phone number, displays it briefly, then dials it.

You can also enter the number of the 1-touch dialing key (for example, 2) and press

Call

Choosing your phone number (NAM selection)

Your service provider can set up your phone to have two phone numbers that are activated in different service areas—for example, one number for the Toronto area and one number for the Montreal area.

A number assignment module, or NAM, consists of a phone number and network information that the service provider programs into your phone. When you select a NAM, you’re not only selecting a phone number, you’re also selecting a home system in which you will not be charged roaming fees.

The two NAMs are not equal. Some features, such as system selection (see page 33) and network feature setting (see page 27), are available only when the primary NAM is selected.

Use

4 5 to select a NAM.

Send own number

This network service allows you to hide your phone number from a person you are calling who has Caller ID. (If for some reason your network prevents phone numbers from being displayed, you may be able to use this feature to number to the person you are calling.) Contact your service provider for feature codes for showing/hiding your phone number.

show

your

Standard method

Dial the feature code followed by the number you want

to call.

Press

Example: If the feature code to hide your number is *67 and the number you want to dial is (416) 555-1234, dial

*674165551234

Call

, then press

Call

Menu method

You can save the feature code given by your service provider so that

Send own number

and then use feature setting’ on page 27.

This feature must be activated before each call.

displays your number to the person you are calling.

Yes

prevents your number from being shown to the person

you are calling.

appears in your phone’s menu,

4 4 5 to use this feature. See ‘Network

Calling card calls

Before you can make a call using a calling card, you have to enter your calling card information into the phone. See ‘Calling card set-up’ on page 18.

To make a call using a calling card:

Enter the phone number, including any prefix (such as 0

or 1) that your calling card may require when you make a calling card call. See your calling card for instructions.

Press and hold

displays

Card call

Your phone displays

Wait for the tone, then press OK.

Your phone displays

Wait for the tone again, then press OK.

for a few seconds until your phone

Call

Wait for tone, then press OK

Wait for tone, press OK again

System selection

Your phone is capable of working in residential, private, and public systems. You can choose how your phone selects a network to use.

This feature is which means your phone automatically searches for networks available to you and chooses the appropriate one. Every time you switch on your phone,

5 in your phone. The default is

Automatic

is selected.

If you choose and unavailable networks. (You can’t use unavailable networks.) Scroll through the choices and press OK when you reach the one you want.

If you choose for new private and residential systems. When it finds the best new system, it displays it. You can then select it or start another search by pressing

Note: The only when your primary phone number (NAM1) is selected. See page 32.

Manual

, your phone displays a list of available

Manual

New Search

, your phone begins a new search

and

New search

features can be used

To switch from private to public

If you are in a private system and want access to a public system, press and hold Your phone will display and your phone will use the public system for the next outgoing call. After the call it will revert to

system selection

when you are not in a call.

Search public systems?

Automatic

Press OK

Automatic answer

This feature is available only when your phone is connected to a headset or to an approved handsfree car kit equipped with the ignition sense option, with the ignition on.

When automatic answer is turned on, your phone answers incoming voice calls after one ring. Use this feature on or off.

4 1 4 to turn

Touch tones

Your phone can generate various sounds, called touch tones, when the keys are pressed.

Touch tones can be used for many automated services such as checking voice mail, movie times, and airline arrival/ departure times.

Note: Sending confidential information over the air using touch tones is not recommended.

Setting manual touch tone length

Use when you press a key:

Continuous

and hold the key.

Fixed

regardless of how long you press and hold the key.

Off

press the keys.

4 2 1 1 to set the length of touch tones created

means the tone sounds for as long as you press

sets the tone length to one tenth of a second,

turns off touch tones. No tones will be sent when you

Setting automatic touch tone length

Use automatically by the phone to or

4 2 1 2 to set the length of touch tones sent

(one tenth of a second)

(half a second).

Long

Short

Saving touch tone strings

Touch tone strings can be used for sending and receiving information with your phone. Save touch tone strings the same way you save phone numbers (see page 16).

For example, you can save your office voice mailbox number along with your password for easy access to your messages. See ‘Special characters in phone numbers’ on page 12.

Sending touch tone strings

During a call, press to clear any numbers from the

display.

Press

Scroll to

Enter or find the touch tone string, then press OK.

Options

Touch tones

, then press OK.

Restore factory settings

You can use your phone to their factory defaults (as in a new phone). You will be required to enter the security code.

Note: The phone book, language setting, call timers, security code, and lock code are not affected.

4 2 3 to reset many of the settings in

8. Phone book

Your phone allows you to save 100 phone numbers and associated names so they are right at your fingertips for easy dialing.

Saving names and numbers

Saving a name and number is easy! Just enter the phone number, press

or , then press

name if you wish, then press OK.

Each name may consist of up to 16 characters and each phone number may consist of up to 32 characters.

Saving a number quickly

To save a number quickly, enter the phone number, press

or , then press and hold to your phone book and you can add a name to it later (see ‘Editing names and numbers’ on page 38).

Saving a name and number while in a call

To save a name and number while in a call:

Press .

Press

Scroll to

Enter a name if you like, then press OK.

Enter the phone number, then press OK.

The entry is displayed in your phone list. Press the number or to clear the screen (the current call will not be affected).

Options

Phone book

Add new

. Enter a

Save

, then press OK.

, then press

. The number is saved

Save

Select

Call

to call

Notes about saving names

• A name may appear only once in memory. If you try to save a name that already exists in memory, the phone asks if you want to replace the existing name.

• If you try to save a phone number and your phone book is full, you are given the option to replace an existing entry. Scroll to the entry you want to replace and press

, or press to cancel.

Finding names and numbers

There are several ways to find names and numbers in your phone book.

From the start screen

Press to access your phone book, then scroll to the desired name/number.

You can also press the number key that corresponds

Tip:

to the first letter of the name. The first matching entry is displayed at the top of the screen.

Using the Phone book menu

Press letters of the name, then press OK. Your phone displays the first matching entry at the top of the screen.

1 1, enter the first few

While performing other functions

Say you want to forward your phone calls to a number that is saved in your phone book. When you are prompted to enter the phone number, you can find it instead—simply press access your phone book.

Editing names and numbers

To edit phone book entries, press entry you want to edit, then press number as needed.

1 3, scroll to the

. Edit the name and

Edit

Erasing names and numbers

Use

One by one Erase all

to enter your security code first).

1 4 to erase entries from your phone book.

lets you select one entry at a time to be erased.

erases your entire phone book (you will be required

Scrolling view

Use book (

1 5 1 to choose a scrolling view for your phone

Name list, Name+number

If your phone book’s scrolling view is set to

Tip:

Name list

number associated with a name by pressing and holding the key.

Name only

, or

Name only

, you can view the phone

Checking available memory

Use and how many are being used. (Each memory location holds one phone number and associated name.)

1 5 2 to see how many memory locations are free

9. Call log

For your convenience, the call log (Menu 3) saves a list of phone numbers you have dialed, and can show you how much time you have spent on the phone. If you subscribe to the caller ID network service, the call log also records the phone numbers of missed calls and received calls. Contact your service provider for details.

The Options key

When you access

and press

calls

phone’s display.

dials the number.

Call

Call time

clock must be set; see page 20.)

Edit number

allows you to enter a name for the number, edit the

Save

number if needed, and save both to your phone book.

erases the number from the call list.

Erase

View number

the name is currently displayed.

Missed calls, Received calls

, a list of options appears on your

Options

shows the time of the last call. (Your phone’s

allows you to edit the number.

displays the associated phone number if only

Missed calls

If you subscribe to the caller ID network service, your phone automatically stores the last 10 numbers that have tried unsuccessfully to reach you (as long as the caller allowed his or her number to be shown to you).

, or

Dialed

When the display says Missed calls

Press

. If you have missed more than one call, you can

List

scroll through the list of numbers. To dial the displayed number, press

Options

, then choose

Call

Viewing the missed calls list at any time

Use To dial a number, press

3 1 to view the missed calls list at any time.

Options

, then choose

Call

Received calls

If you subscribe to the caller ID network service, your phone automatically stores the phone numbers of the 10 most recent calls you’ve answered. Use received calls list. To dial a number, press choose

Call

3 2 to view the

, then

Options

Dialed calls

Your phone automatically stores the last 10 numbers you’ve dialed. From the start screen, press to access the dialed calls list. Scroll to the desired number, then press

Note: To perform any of the options listed on page 39, access the dialed calls list by pressing

33.

Call

Clearing call lists

Use call lists.

3 4 to clear the missed, received, and/or dialed

Call timers

Use time you’ve spent in calls. Times are for the currently selected phone number; your phone has a separate timer for each phone number, or NAM (see page 32).

Note: The actual time invoiced for calls by your service provider may vary, depending upon network features, rounding-off for billing, and so forth.

3 5 to see the amount of

Viewing call timers

Use

Last call

applicable.

All calls

reset.

Life timer

your phone and cannot be reset.

3 5 to view the various call timers.

is the duration of the last call, or current call if

is the duration of all calls since the timers were last

displays the duration of all calls for the life of

Setting timers back to 0

Use enter your security code.

3 5 4 to clear call timers. You will be required to

Displaying the current call timer during calls

Press

Scroll to On, then press OK.

During a call, the amount of time spent in that call will be displayed.

Details

Select

3 5 1.

10. Voice messages

Voice mail is a network service that allows callers to record a message when you cannot be reached. You can then call your voice mailbox and retrieve your messages.

Saving your voice mailbox number

When you subscribe to voice mail, your service provider will give you a voice mailbox number. You should save this number so you can call your voice mailbox by pressing and holding the

key. See ‘Voice mailbox number’ on page 23.

Listening to new voice messages

When you receive a voice message, you by beeping, displaying the voice message indicator

, and displaying

display the number of messages if there is more than one.

Note: The method of notification depends on your service provider.

When your phone notifies you that you have a new voice message, press number, if you have saved it.

New voice message

. Your phone dials your voice mailbox

Listen

Calling your voice mailbox at any time

Once you have saved your voice mailbox number, you can press and hold the key to dial your voice mailbox.

your

phone may notify

. The phone may

11. Text messages

The text message network service allows you to receive text messages from a variety of sources, such as a Web page set up by your service provider. Contact your service provider for more information.

Reading messages

When you receive a text message, the phone displays the

indicator, either

emergency message

received), and makes a sound (depending on the message alert tone; see page 22).

To read the message, press Inbox, with the new message selected. Press If necessary, use the scroll keys to read the entire message.

After reaching the end of the message, use the scroll keys to view the sender’s name or phone number, and the date and time the message was received.

Message received

(if an emergency message has been

Read

Options when reading messages

Several options are available while you’re reading a message. Just press

Storage of incoming messages

When you have an incoming text message and your phone’s memory is full, one or more low-priority messages, which have been read, will automatically be deleted in order to receive the new text message. Messages are usually deleted from your Inbox, but an emergency message may cause messages to be deleted from the Saved folder.

If the message memory is still full, your phone will display

No space: message waiting

by pressing OK. You should delete one or more old messages to make room for the new message. The network will re-send the message at a later time.

. You can clear this notification

Erasing all text messages

Use

messages. Erase all

messages from one of the following categories:

All read All in inbox All saved All in outbox

2 1 5 to access the

Erases all read messages in the inbox Erases all messages in the inbox Erases all messages stored in the Saved folder Erases all messages in the outbox

option for

allows you to permanently erase all

Erase all

Text

Writing and sending text messages

Note: The availability of writing and sending text messages may vary according to your wireless service provider, and you must subscribe to the text messaging network service. Please contact your service provider for details.

The phone allows you to write a text message using your keypad. Once you have written a message on your screen, you will have options for sending your message.

Writing a text message

Press

Write your text message by entering letters and numbers

from your keypad

The function of the Navi™ key will change to

Your

Options

Send Back Clear screen Settings Save

Sending a text messages

Write a text message and press

To send the message, highlight

Enter the phone number (or press

number in the phone book), then press

2 1 3 and select

menu is:

send the message return to the clear all entered text from the screen choose a setting for your message store the text message to

Write new

Text messages

Options

Send

Saved

and press

to locate the

Send

Options

Message settings

This network feature allows you to mark your text message as urgent, place your number within the text message, or request a read receipt. This is a network feature. Contact your service provider for more information.

Message settings are located in the menu as settings by pressing

Urgent

Read receipt

Callback no.

Received exclamation mark (!) in front of the message.

Note:

Callback no.

. You may select or deselect the following

Settings

notify recipient that your message is important

notify you that the recipient has opened your message

place your phone number within the message

Urgent

Mark

messages are indicated with an

is the default setting for your phone.

Unmark

Write new

options

About the Outbox

Use Menu 2 1 4 to access the Outbox. The Outbox stores messages that were sent successfully as well as messages that were sent unsuccessfully. The icon in front of a message heading shows that you have sent the message to the text message center. The icon shows that you attempted to send the message, but your attempt was unsuccessful.

Press

to read the selected message.

Read

Forwarding and replying to a message

You can forward or reply to messages which are located in the

Inbox, Saved

the message and press

folder or

Read

of your phone. Highlight

Outbox

. The

Options

menu appears.

Forwarding a text message

Highlight the message that you want to forward

Press

Scroll to

Send the message as you normally would

Read

Forward

, then press

, press

Options

Replying to a text message

Highlight the message that you want to reply to

Press

Scroll to

Send the message as you normally would

Read

Reply,

, then press

press

Options

12. Extra features

Alarm clock

The alarm clock feature is based on your phone’s internal clock and sounds an alert at a time you specify.

Setting the alarm clock

Use

Note that when you’re entering the alarm time, use two digits for both hours and minutes (for example, enter 1:30 as

am/pm

Note: The key does not work on this screen. If you make a mistake, re-enter all four digits.

Alarm volume

The alarm volume is determined by the current ringing volume. However, if you have manually set the ringing option (see page 21) to the phone only sounds a quiet beep.

When the alarm sounds

• To shut off the alarm, press any key except

•If you press

• If you let the alarm sound for one minute without

7 1 to turn the alarm clock on or off.

). If the clock’s time format (see page 20) is set to

0130

, you will be asked to choose am or pm.

Silent

minutes. To turn off the alarm before then, press

pressing a key, it stops for 10 minutes, then starts again.

quick alert setting (see page 23), the

Quiet

Snooze

Beep once

, the alarm sounds again in 10

or have selected

Snooze

Stop

If you turn off the phone

If you turn off the phone and the alarm is set, the phone switches itself on at alarm time, then the alarm sounds.

• To shut off the alarm, press any key except The phone displays keep it on or to switch it off.

•If you press minutes, then the alarm sounds again.

REMEMBER! Do not switch on the phone when wireless phone use is prohibited or when it may cause interference or danger.

Keep the phone on?

, the phone turns itself off for 10

Snooze

Press

Snooze

Yes

Games

Use fun games in your phone. To pause a game, press . To resume, choose

REMEMBER! Your phone must be switched on to use this function. Do not switch on the phone when wireless phone use is prohibited or when it may cause interference or danger.

Memory

Reveal pictures to find pairs in as few tries as possible. Move the cursor with the 2 (up), 4 (left), 6 (right), and 8 (down) keys. Press the 5 key to reveal pictures. Once found, pairs stay visible. Press the key to jump to the right over revealed pictures or to move from the bottom right of the screen to the top left. Press the key to jump to the left over revealed pictures or to move from the top left of the screen to the bottom right.

6 to challenge yourself or a friend to the three

Continue

Snake

Feed the snake with as many goodies as possible and watch it grow. Use keys 2, 4, 6, and 8 to turn the snake toward food. The longer the snake’s tail grows, the higher your score. If the snake hits its own tail or the surrounding wall, the game is over.

Logic

Find the secret combination of figures in a column. Possible figures are shown at the top of the display. Press the 5 key repeatedly to select a figure and the 2, 4, and 8 keys to move the cursor. Once you think you have the right combination, press the key. The result appears as a set of marks above the column. A correct figure in the right place gets a full mark; a correct figure in the wrong place gets a half mark. The game ends when the correct figures are in the right place.

To copy a figure from the previous column, move

Tip:

the cursor over it using the 2, 4, or 8 key, then press the 5 key.

13. Security features

Access codes overview

Access codes consist of the lock code and security code. When you get your phone, you should change these codes from their defaults, write down the new codes, and keep them in a safe place away from the phone. Avoid using access codes that are similar to emergency numbers, such as 911, to prevent accidental dialing of the emergency number.

Lock code

Your phone’s lock code is used to lock and unlock your phone. The default lock code is 1234. Use the lock code.

When the phone requires the lock code, it displays

lock code:

If you enter a wrong lock code five times in succession, your phone prompts you for the security code.

Enter the code, then press OK.

Security code

The security code is required to restrict calls and to restore factory settings. The default security code is 12345. Use

4 3 2 4 to change the security code.

When the phone requires the security code, it displays

Security code:

If you enter an incorrect security code five times in succession, the phone will not accept any input for the next five minutes.

Enter the code, then press OK.

4 3 2 3 to change

Enter

Restricting calls

Use handy if you want to lend your phone to someone but don’t want them to make long-distance or other expensive calls.

4 3 1 to restrict outgoing or incoming calls. This is

Restricting incoming calls

Choose

Restrict incoming calls

receiving incoming calls. Enter your security code, then press OK. Press this change (or to cancel).

Note: This feature requires the caller ID network service, and the caller’s ID must be available to the phone in order for the restriction to work.

Allowing incoming calls

To allow incoming calls once again, choose

and enter your security code. Press

calls

. Press

, then press . Press

Mark

to save this change (or to cancel).

Yes

to prevent your phone from

to save

Yes

Restrict incoming

, then press

Unmark

Restricting outgoing calls

You can create a list of numbers to which outgoing calls cannot be made. A call restriction can consist of an entire phone number, an area code, etc. When the restriction is selected, calls cannot be made to any number beginning with those digits. For example, entering block calls to (214) 555-1234 only. 1 will block all calls starting with 1, including long distance calls and 1-800 calls.

Adding numbers to the restricted outgoing calls list

To prevent your phone from making outgoing calls, choose

Restrict outgoing calls OK

will block 1-800 calls only.

1800

. Continue with the steps illustrated below.

Add restriction

. Enter your security code, then press

is selected. Press OK.

2145551234

will

Enter the phone number, area code,

etc. to which you want to restrict calls, then press OK.

If you want, give a name of up to

10 characters to the restriction (such as

Joey, Long dist

), then press OK.

The entry is added to your list of restricted numbers.

Allowing calls to a number on the list

If you later decide to allow calls to a restricted number, press your list of numbers. Press remove the restriction. (The number remains in the list so that you can restrict it again later by pressing press . Press cancel).

Making changes to the restricted outgoing calls list

To edit or completely erase an entry in the list, choose or

, select the entry you want to edit or erase, and

Erase

follow the instructions on the screen.

, or

1-800

to see

Select

to save your changes (or to

Yes

Unmark

.) When you’re done,

Mark

Edit

Phone lock

You can prevent unauthorized use of your phone by locking it. When your phone is locked, only incoming calls and calls to the unlocked phone number (see below) are allowed. The memory and menu are unavailable.

Note: Calls may still be possible to emergency numbers.

How to lock your phone

Press press OK. Scroll to On, then press OK.

4 3 2 1. Enter the lock code (see page 51), then

How to unlock your phone

Press

, enter the lock code, then press OK.

Answering a call when the phone is locked

Press

Answer

Saving the unlocked phone number

Use when your phone is locked. You will be required to enter the lock code.

4 3 2 2 to save a number that may be called even

Calling the unlocked phone number

Press or , or manually enter the number exactly as it is saved, then press

Call

14. Accessories

An extensive range of accessories is available for your phone. You can select the accessories that best suit your specific communication needs. For availability, see your local authorized Nokia dealer.

A few practical rules for accessory operation:

• Keep accessories out of small children's reach.

• When you disconnect the power cord of any accessory, grasp and pull the plug, not the cord.

• Check regularly that all wireless phone equipment in your vehicle is mounted and operating properly.

• Installation of complex car equipment must be completed by qualified personnel only.

WARNING!

Use only batteries, chargers and accessories approved by the phone manufacturer for use with this particular phone model. The warranty does not cover defects or damages caused by a product which is not a Nokia Original Accessory.

Nokia Xpress-on™ colour covers

Your phone’s Xpress-on™ cover is available in several fashion colours. Extra covers may be purchased from your authorized Nokia dealer.

Note: Always store the phone with cover attached.

Changing covers

When changing covers, don’t use the phone’s antenna as leverage!

Switch off the power and disconnect the phone from

the charger or any other device.

Using a coin, depress the

coloured tab on the top of the phone and slide the colour cover forward.

Remove the cover.

Remove the rubber

keypad from the back of the cover. Place it into the back of the new cover.

Place the bottom of the

cover against the bottom of the phone. Make sure all three sets of plastic tabs line up with their respective slots, as shown at left. Close the cover and snap it shut all the way around the edge of the phone.

Batteries

Several batteries are available for your phone:

• BLS-2N Extended Li-Ion 900 mAh

• BMS-2S Extended NiMH 900 mAh

• BMS-2V Vibrating NiMH 900 mAh

• BLS-4 Ultra Extended Li-Ion 1500 mAh

Charging times

The table below displays approximate battery charging

. These charging times will charge your phone to

times

about 80% of its capacity, and the battery strength indicator will stop scrolling. If you wish to obtain 100% battery capacity, please allow another two hours for “maintenance” charge.

Battery

BLS-2N Extended Li-Ion 900 mAh

BMS-2S Extended NiMH 900 mAh

BMS-2V Vibrating NiMH 900 mAh

BLS-4 Ultra Extended Li-Ion 1500 mAh

Standard

Travel Charger

ACP-7U

4 hours

5 hours 3 hours 30 minutes

Rapid Travel

Charger ACP-9U

2 hours 2 hours

1 hour

30 minutes

1 hour

30 minutes

Rapid Cig.

Lighter Charger

LCH-9

1 hour

30 minutes

1 hour

30 minutes

Talk and standby times

Battery

BLS-2N Extended Li-Ion 900 mAh

BMS-2S Extended NiMH 900 mAh

BMS-2V Vibrating NiMH 900 mAh

BLS-4 Ultra Extended Li-Ion 1500 mAh

Note: The times shown are approximate. Battery operation times vary according to signal conditions, network parameters set by the service provider, and how you use your phone.

Talk Time Standby Time

Digital Analog Digital Analog

2 hrs to

3 hrs 15 min

2 hrs to

3 hrs 15 min

2 hrs to

3 hrs 15 min

3 to

5 hrs

1 hr to

1 hr 45 min

1 hr to

1 hr 45 min

1 hr to

1 hr 45 min

1 hr 30 min to

2 hrs 45 min

100 to

200 hrs

100 to

200 hrs

100 to

200 hrs

170 to

335 hrs

30 to

50 hrs

30 to

50 hrs

30 to

50 hrs

50 to

83 hrs

Chargers and other accessories

WARNING!

This apparatus is intended for use when supplied with power from the Standard Travel Charger (ACP-7U), Rapid Travel Charger (ACP-9U), or Rapid Cigarette Lighter Charger (LCH-9).

The following chargers and other accessories are available for your phone; please see your dealer for details. Also, refer to any accessory options manual that may have been included in your sales package for the entire line of Nokia Original Accessories.

Note: When a charger is not in use, disconnect it from the power source. Do not leave the battery connected to a charger for longer than a week, since overcharging may shorten its life. If left unused, a fully charged battery will discharge itself over time.

ACP-7U Standard Travel Charger

Use this durable and economical charger to charge all battery options. Plug the charger into a wall outlet and connect the connector to the bottom of your phone. Check the charging status on the phone display.

Calls can be made during charging, but charging will stop for the duration of the call.

Note: If the battery is completely empty, you cannot use the phone until it has enough charge to operate.

The Standard Travel Charger is available for different voltage levels and can also be used with the DCH-9 Compact Desktop Charging Stand.

ACP-9U Rapid Travel Charger

The extremely light, functionally designed Rapid Travel Charger charges your phone battery quickly.

Plug the charger into a wall outlet and connect the connector to the bottom of your phone. Check the charging status on the phone display. You can use your phone while charging.

Operating within a voltage range of 100V-240V AC (50Hz-60Hz), the Rapid Travel Charger is practically voltage-independent in normal office and household use. Like the Standard Travel Charger, the Rapid Travel Charger is compatible with all battery options. The Rapid Travel Charger can also be used with the DCH-9 Compact Desktop Charging Stand.

LCH-9 Rapid Cigarette Lighter Charger

The multivoltage Rapid Cigarette Lighter Charger allows you to charge your phone when you travel. The small charger's functional design fits well with most car lighters and interiors.

Charging times are the same as for the Rapid Travel Charger ACP-9U. Calls can be made during charging.

A green light indicates that the Rapid Cigarette Lighter Charger is ready to charge. Check the charging status on the phone display. The input voltage is 12 or 24 V DC, negative grounding.

The Rapid Cigarette Lighter Charger can be used with all accessories available for your phone.

Avoid prolonged charging with the Rapid Cigarette Lighter Charger when the car engine is not running. This may cause the battery of your car to drain.

Note: In some cars the cigarette lighter plug is not provided with power when the ignition is switched off. Verify that the green LED light is lit.

DCH-9 Compact Desktop Charging Stand

Compatible with all battery options, the Compact Desktop Charging Stand can be used with the Standard Travel Charger ACP-7U or the Rapid Travel Charger ACP-9U. The Compact Desktop Charging Stand provides mounting for both the phone and a spare battery. Plug the charger into a wall outlet and connect the connector to the back of the Compact Desktop Charging Stand. Place your phone and/or a spare battery in the stand to begin battery charging.

When the phone is charging, no lights are displayed on the stand; check the charging status of the phone battery on the phone display.

Charging moves to the rear slot once the front battery is 100% charged.

When the spare battery is charging, check the status indicator on the left side of the charging stand. A red light indicates that the battery is charging; a green light indicates that the battery is charged to at least 80% of its capacity.

DCH-9 Rear Slot Charging Times

Battery

BLS-2N Extended Li-Ion 900 mAh

BMS-2S Extended NiMH 900 mAh

BMS-2V Vibrating NiMH 900 mAh

BLS-4 Ultra Extended Li-Ion 1500 mAh

Using ACP-7U Using ACP-9U

Front slot

6 hours,

30 minutes

12 hours

empty

Front slot

occupied

8 hours,

30 minutes

15 hours,

45 minutes

Front slot

empty

4 hours,

30 minutes

8 hours

Front slot

occupied

5 hours,

30 minutes

10 hours,

30 minutes

The phone has the built-in intelligence to maintain the battery, so there is no need for a discharge feature on the stand.

15. Reference information

Important safety information

Traffic safety

Do not use a hand-held telephone while driving a vehicle. If using a hand-held phone park the vehicle before conversing. Always secure the phone in its holder; do not place the phone on the passenger seat or where it can break loose in a collision or sudden stop.

The use of an alert device to operate a vehicle’s lights or horn on public roads is not permitted.

Remember, road safety always comes first!

Operating environment

Remember to follow any special regulations in force in any area and always switch off your phone whenever it is forbidden to use it, or when it may cause interference or danger.

When connecting the phone or any accessory to another device, read its user’s guide for detailed safety instructions. Do not connect incompatible products.

As with other mobile radio transmitting equipment, users are advised that for the satisfactory operation of the equipment and for the safety of personnel, it is recommended that the equipment should only be used in the normal operating position (held to your ear with the antenna pointing over your shoulder).

Electronic devices

Most modern electronic equipment is shielded from radio frequency (RF) signals. However, certain electronic equipment may not be shielded against the RF signals from your wireless phone.

Pacemakers

Pacemaker manufacturers recommend that a minimum separation of 6 inches (20 cm.) be maintained between a handheld wireless phone and a pacemaker to avoid potential interference with the pacemaker. These recommendations are consistent with the independent research by and recommendations of Wireless Technology Research.

Persons with pacemakers:

• Should always keep the phone more than 6 inches (20 cm) from their pacemaker when the phone is switched on;

• Should not carry the phone in a breast pocket;

• Should use the ear opposite the pacemaker to minimize the potential for interference.

• If you have any reason to suspect that interference is taking place, switch off your phone immediately.

Hearing aids

Some digital wireless phones may interfere with some hearing aids. In the event of such interference, you may want to consult your service provider.

Other medical devices

Operation of any radio transmitting equipment, including cellular phones, may interfere with the functionality of inadequately protected medical devices. Consult a physician or the manufacturer of the medical device to determine if they are adequately shielded from external RF energy or if you have any questions. Switch off your phone in health care facilities when any regulations posted in these areas instruct you to do so. Hospitals or health care facilities may be using equipment that could be sensitive to external RF energy.

Vehicles

RF signals may affect improperly installed or inadequately shielded electronic systems in motor vehicles (e.g. electronic fuel injection systems, electronic anti-skid (anti-lock) braking systems, electronic speed control systems, air bag systems). Check with the manufacturer or its representative regarding your vehicle. You should also consult the manufacturer of any equipment that has been added to your vehicle.

Posted facilities

Switch your phone off in any facility where posted notices so require.

Potentially explosive atmospheres

Switch off your phone when in any area with a potentially explosive atmosphere and obey all signs and instructions. Sparks in such areas could cause an explosion or fire resulting in bodily injury or even death.

Users are advised to switch off the phone while at a refueling point (service station). Users are reminded of the need to observe restrictions

on the use of radio equipment in fuel depots (fuel storage and distribution areas), chemical plants or where blasting operations are in progress.

Areas with a potentially explosive atmosphere are often but not always clearly marked. They include below deck on boats; chemical transfer or storage facilities; vehicles using liquefied petroleum gas (such as propane or butane); areas where the air contains chemicals or particles, such as grain, dust or metal powders; and any other area where you would normally be advised to turn off your vehicle engine.

Vehicles

Only qualified personnel should service the phone, or install the phone in a vehicle. Faulty installation or service may be dangerous and may invalidate any warranty which may apply to the unit.

Check regularly that all wireless phone equipment in your vehicle is mounted and operating properly.

Do not store or carry flammable liquids, gases or explosive materials in the same compartment as the phone, its parts or accessories.

For vehicles equipped with an air bag, remember that an air bag inflates with great force. Do not place objects, including both installed or portable wireless equipment, in the area over the air bag or in the air bag deployment area. If in-vehicle wireless equipment is improperly installed and the air bag inflates, serious injury could result.

Switch off your phone before boarding an aircraft. The use of wireless telephones in an aircraft may be dangerous to the operation of the aircraft, disrupt the wireless telephone network and may be illegal.

Failure to observe these instructions may lead to the suspension or denial of telephone services to the offender, or legal action, or both.

Emergency calls

IMPORTANT!

This phone, like any wireless phone, operates using radio signals, wireless and landline networks as well as user- programmed functions which cannot guarantee connection in all conditions. Therefore, you should never rely solely upon any wireless phone for essential communications (e.g. medical emergencies).

Making an emergency call

If the phone is not on, switch it on.

Press and hold the key for several seconds to

ready the phone for calls.

Key in the emergency number for your present location

(e.g. 911 or other official emergency number). Emergency numbers vary by location.

Press

Call

Radio frequency (RF) signals

Your wireless handheld portable telephone is a low power radio transmitter and receiver. When it is ON, it receives and also sends out radio frequency (RF) signals.

In August, 1996, the Federal Communications Commission (FCC) adopted RF exposure guidelines with safety levels for handheld wireless phones. Those guidelines are consistent with safety standards previously set by both U.S. and international standards bodies:

ANSI C95.1 (1992)*, NCRP Report 86 (1986)*, ICNIRP (1996)*.

Those standards were based on comprehensive and periodic evaluations of the relevant scientific literature. For example, over 120 scientists, engineers, and physicians from universities, government health agencies and industry reviewed the available body of research to develop the ANSI Standard (C95.1).

The design of your phone complies with the FCC guidelines (and those standards).

*American Nati onal Standards Institute, National Council on Radiat ion Protection and Measurements; International Commission on Non-Ionizing Radiation Protection.

Care and maintenance

Your phone is a product of superior design and craftsmanship and should be treated with care. The suggestions below will help you to fulfill any warranty obligations and allow you to enjoy this product for many years. When using your phone, battery, charger, OR any accessory:

• Keep it and all its parts and accessories out of small children’s reach.

• Keep it dry. Precipitation, humidity and liquids contain minerals that will corrode electronic circuits.

• Do not use or store it in dusty, dirty areas as its moving parts can be damaged.

• Do not store it in hot areas. High temperatures can shorten the life of electronic devices, damage batteries, and warp or melt certain plastics.

• Do not store it in cold areas. When the phone warms up (to its normal operating temperature), moisture can form inside the phone, which may damage the phone's electronic circuit boards.

• Do not attempt to open it. Non-expert handling of the device may damage it.

• Do not drop, knock or shake it. Rough handling can break internal circuit boards.

• Do not use harsh chemicals, cleaning solvents, or strong detergents to clean it.

• Do not paint it. Paint can clog the device’s moving parts and prevent proper operation.

• Use only the supplied or an approved replacement antenna. Unauthorized antennas, modifications or attachments could damage the phone and may violate regulations governing radio devices.

• If the phone, battery, charger, or any accessory is not working properly, take it to your nearest qualified service facility. The personnel there will assist you, and if necessary, arrange for service.

16. Technical information

Transmitting power: Up to 600 mW nominal

Operating voltage: 3.6 V nominal

Frequency band: lowband 824.04 - 848.97 MHz (TX)

highband 1850.04 - 1909.92 MHz (TX)

Number of channels: 832 lowband

1997 highband

Number of NAMs 2

Memory locations: 100

Memory capacity: 16 characters per name

32 characters per number

CANADA Nokia Products Ltd. 575 Westney Rd. South Ajax, Ontario L1S 4N7 Tel: (905) 427-6654 1-888-22NOKIA (1 888 226-6542)

Nokia, Connecting People and the Original Accessories logos are trademarks of Nokia Corporation and/or its affiliates.

The information contained in this User Guide was written for Nokia phone NSW-1NX.

The right to make changes and improvements to any of the products described in this guide without prior notice is reserved.

These commodities are authorized by the U.S. Government for export only to Canada, Mexico, or the United States. They may not be resold, diverted, transferred, or otherwise disposed of in any other country, either in their original form or after being incorporated through an intermediate process into other end-items, without the written approval of the U.S. Department of State.

Part No. 9352569 Printed in Canada 06/00

869.04 - 893.97 MHz (RX)

1930.08 - 1989.96 MHz (RX)

17. NOKIA 1-YEAR LIMITED WARRANTY

NOKIA warrants that the NOKIA wireless phone and accessories are free from defects in material and workmanship. The warranty period for the Phone (Radio) units and all accessories (excluding carry cases) is twelve (12) months from the date of purchase OR fourteen (14) months from date of wholesale shipment from NOKIA, OR fifteen (15) months from the date of manufacture by NOKIA. The warranty period for the Carry cases is three (3) months from the date of purchase or five (5) months from the date of wholesale shipment from NOKIA.

During the warranty period, NOKIA will, at its option, repair or replace the defective product free of charge. Replacement Product may be either new or remanufactured or refurbished.

However, if NOKIA determines that the warranty conditions cannot be applied, the purchaser will be billed for the repair and shipping.

EXCEPTIONS

This warranty is subject to the following exceptions:

1. Mobile or fixed installation, which is not in accordance with the installation instructions, published by NOKIA, will void the warranty. Damage caused by a repair or an attempt to repair by other than a service centre authorized by NOKIA will void the warranty;

2. This warranty covers normal consumer use and does not cover defects or damage to any product which, in the sole opinion of Nokia, has been subject to: improper storage, exposure to moisture or dampness, exposure to fire, sand, dirt, windstorm, lightning, or earthquake; to theft, battery leakage, unauthorized modification, misuse, neglect, abuse, misapplication, accident, alteration, improper installation, maladjustment of consumer controls, or abnormal operating conditions, or which has been attributable to acts of God;

3. Fuses are not covered by the warranty;

4. This warranty does not cover defects or damages caused by a product which is not approved by NOKIA to be connected to its wireless phone;

5. This warranty does not cover defects or damages caused by improper or defective function of the carrier system or by inadequate signal reception by the antenna;

6. Removal and reinstallation costs are not covered by this warranty;

7. This warranty is applicable only Nokia Products Ltd, in Ajax, Ontario, Canada, and sold either in Canada or Bermuda.

8. Removal, alteration, or defacing of the Serial Number Plate, or the accessory Date Code Labels will void the warranty.

In no event shall NOKIA be liable for incidental, special, or consequential damages, direct or indirect, loss of unanticipated benefits or profits, loss of use of its wireless telephone, resulting from the use of its wireless phone, or its accessories, or arising from any breach of this warranty.

CLAIM PROCEDURE

In order to obtain warranty performance, return the defective unit to the NOKIA Service Centre with transportation charges prepaid (Shipping of the repaired unit may be paid by NOKIA, in which case NOKIA shall have risk of loss or damage during this shipment).

The proof of date of purchase will be required before inwarranty service is rendered.

Maintenance and service may be obtained in any authorized service centre in Canada.

EXTENSION OF WARRANTY PERIOD

When a repair is made, an extra 90-day service warranty is given to the labour and parts of the repair concerned. If replacement of a faulty unit is applied, instead of repairing, this 90-day service warranty is applied to the replaced unit.

Besides this 90-day service warranty, the warranty repairs or replacements do not affect the original warranty conditions, which are determined by the date of purchase.

THE FOREGOING WARRANTY IS THE PURCHASER’S SOLE AND EXCLUSIVE REMEDY AND IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING BUT NOT LIMITED TO ANY IMPLIED WARRANTY OR MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OR USE.

Some provinces do not allow limitations on how long an implied warranty lasts, so the above limitations may not apply to you.

to products bought through

FOR WARRANTY SERVICE LOCATION, CONTACT YOUR SERVICE PROVIDER/RETAILER/DEALER OR DIRECTLY TO:

NOKIA PRODUCTS LIMITED 575 Westney Road South Ajax, Ontario L1S 4N7

For products being returned to NOKIA or its authorized service centres, the service provider/retailer/dealer shall prepay shipping charges, taxes, duties, insurance. NOKIA shall have no risk for loss or damage during this shipment.

NOTE: As warranty is automatically registered, no further action is required by the consumer.

18. Index

ABC mode 11 access codes 51 accessories 55

batteries 58 chargers 59

covers 55 alarm clock 48 answering a call 16

automatic answer 34 antenna 14

external jack 7 automatic answer 34 automatic redial 18

batteries 58

attaching 3

charging 3

discharging 4

removing 4 blocking calls see restricting

calls

call block see restricting

calls call forwarding

activating 30

cancelling 30 call log 39

clearing lists 40

dialed calls 40

missed calls 39

Options key 39

received calls 40 call restrictions see

restricting calls call timers 40

call waiting 29

answering a waiting call 29 cancelling 29

caller ID 17

showing/hiding number 32

calling card

making calls 33 set-up 18

calls

answering 16 answering automatically 34 answering with call

waiting 29 ending 29 forwarding 30 initiating a second 28 making 15 muting 15, 28 silencing an incoming call

switching between 28 three-way calling 28 unmuting 15, 28

care and maintenance 67 chargers 59 clear key 7 clearing call lists 40 clock 20

alarm clock 48 displaying/hiding 20 setting 20 time format 20

conference calls see three-

way calling

covers, changing 55 cursor 11

dialed calls 40 directory see phone book 36

editing names/numbers 38 emergency calls 25, 65 emergency key 9 26 erasing names/numbers 38 external antenna jack 7

factory settings, restoring 35

game tones 22 games 49

help text 8

Inbox 44 in-call menu 28

Keyguard 13 keypad lock 13 keypad tones 22 keys

clear key 7

key 6

Navi power key 6 scroll keys 6

language 20 lights 7

in car kit 21 lock code 51 locking the keypad 13 locking your phone 53 logic (game) 50

making a call 15 memory 38 memory (game) 49 menu 8

shortcuts 9 message alert tone 22 messages

text see text messages

voice mail 42 missed calls 39 muting the microphone

15, 28 My tones (menu) 21

NAM selection 32 names

editing 38

entering 11

erasing 38

finding 16, 36

saving 36

key 6

Navi network feature setting 27 new call 28 numbers

editing 38

entering 11

erasing 38

finding 16, 36

saving 36

showing/hiding your own 32

on/off 14 one-touch dialing 31

phone book 36

available memory 38

scrolling view 38

phone lock 53 phone number, choosing see

NAM selection power key 6 profiles see quick alert

settings

quick alert settings 23

reading text messages 43 received calls 40 redial

automatic 18

last number 16 restore factory settings 35 restricting calls 51 ringing option 21 ringing tone 22 ringing volume 22

safety guidelines 1, 63 safety information 63 Saved folder 44, 46 scroll keys 6 scrolling view 38 security code 51 security features 51 send own number 32 signal strength 14 silencing an incoming call 17 snake (game) 49 sound see tones special characters 12 speed dialing see one-touch

dialing start screen 7 system selection 33

technical information 68 text messages 43

forwarding 46 Inbox 44 reading 43 replying 47 Saved folder 44, 46 storage 44

writing 45 three-way calling 28 timers 40 tones 21

keypad 22

message alert 22

quick alert settings 23

ringing option 21

ringing tone 22

ringing volume 22

warning and game 22 touch tones 34

saving touch tone strings 35

setting automatic length 35

setting manual length 35

unmuting the microphone

15, 28

vibrating alert 22 voice mail messages 42 voice mailbox number 23 voice privacy 24 volume

earpiece 15

ringing 22

warning and game tones 22 warranty 69 welcome note 24 writing text messages 45

Nokia 5160i User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual

Keys

Indicators and icons

Contents

1. For your safety

FCC/Industry Canada Notice

Using this Guide

2. Battery installation and charging

Attaching the battery

Battery charging

Removing the battery

Important battery information

3. About the phone, keys and menu

Power key

Nokia Navi™ key

Scroll keys

Clear key

Lights

External antenna jack

Start screen

Menu

Entering letters and numbers

Special characters in names

Special characters in phone numbers

Keyguard (locking the keypad)

4. Basic functions

Turning the phone on or off

About the antenna

Checking signal strength

Making a call

Volume adjustment (earpiece)

Muting the microphone

Ending a call

Last number redial

Saving a name and number

Finding a name and number

Answering a call

Silencing an incoming call

5. Settings

Automatic redial

Calling card set-up

Clock

Language

Lights

Tones

Quick alert settings

Voice mailbox number

Voice privacy

Welcome note

6. Emergency calls

Emergency key 9

7. Advanced functions

Network feature setting

Adding feature activation codes to the menu

Adding feature cancellation codes to the menu

In-call menu

Making/receiving multiple calls

Call forwarding

1-touch dialing

Send own number

Calling card calls

System selection

Automatic answer

Touch tones

Restore factory settings

8. Phone book

Saving names and numbers

Finding names and numbers

Editing names and numbers

Erasing names and numbers

Scrolling view

Checking available memory

9. Call log

Missed calls

Received calls

Dialed calls

Clearing call lists