Normal Operation ......................................................................................................11
Special Operation .......................................................................................................11
SW features ................................................................................................................11
Power supply .............................................................................................................12
Data cable connection ................................................................................................12
Issue 3 10/03Nokia Corporation.Page 3
Page 4
TME-3Company confidential
General InformationCCS Technical Documentation
[This page left intentionally blank]
Page 4Nokia Corporation.Issue 3 10/03
Page 5
Company confidentialTME-3
CCS Technical DocumentationGeneral Information
Introduction to TME-3
Nokia TME-3 (Nokia 30) is an enhanced GSM900 and GSM 1800 phase 2/2+ type GSM
Connectivity Terminal. The maximum output power in GSM900 system is 2 W (power
class 4 and in GSM1800 1 W (power class 1).
The Nokia 30 GSM Connectivity Terminal is a M2M (machine-to-machine) communications device with versatile interfaces and advanced functions. Connected to different
machines and devices it provides wireless connectivity and remote management possibilities for customer applications. It offers GPRS, USSD, high-speed data, as well as other
advanced services, over EGSM900/GSM1800 networks. It is a perfect fit for various
application environments for its size, vers atility and reliability.
The TME-3 does not include keypad and display, TME-3 user interface comprises three
leds. The leds indicate for example incoming calls and field strength signal level.
Figure 1: Nokia 30 GSM Connectivity Terminal
Product and Module List
Name of moduleType code
TransceiverTME-30600344
Assembly partsMTME30262539Assembly parts must be ordered as separate
Issue 3 10/03Nokia Corporation.Page 5
Material
code
Notes
spare parts
Page 6
TME-3Company confidential
General InformationCCS Technical Documentation
TME-3 with accessories
Figure 2: Product with accessories
8
9
Nokia 30 and accessories:
ItemNameType codeMaterial code
1
2Power supply unit ACW-50630527
3RS-232 Data adapterDAU-120630452
4RS-232 Data c abl eAXS-30730249
5Nokia 30 installation kitTME-30262712
6Nokia 30 Product Note9357345
8Power cable DC0730244
9Power cable AC (Eur o )0730248
2.Power sup ply unit (ACW-5A)0630527
Power supply unit (ACW-5A)0675341
DC-power cable (3.0 mm plug)0730244
AC-power cable (Euro)0730248
AC-power cable (U.K)0730247
AC-power cable (U.S.)0730246
AC-power cable (AS)0730245
AC-power cable (China)-
AccessoriesProduct code:
3.Data adapter RS-232 (DAU-12)0630452
4.Data cable RS-232 (AXS-3)0730249
5Installation Kit 0262712
6.Nokia 30 Product note (en-ge-fr -sp-r s-hu)9357345
Nokia 30 Product note (en-tr-pl-ro-bg-uk)9361026
Nokia 30 Product note (en-fi-sw-it-pr-du )9361027
Nokia 30 Product note (en)9361028
Nokia 30 Product note (en-ch-ch-ch)9354882
Nokia 30 Product note LSA (en-sp-pr)External antenna cable (XRM-1)0730262
Issue 3 10/03Nokia Corporation.Page 7
Page 8
TME-3Company confidential
General InformationCCS Technical Documentation
Technical Specifications
Dimensions
UnitDimensions (mm)Weigh t (g)Notes
TME-3 terminal84 x 53 x 2665Without Power supply, Data
adapter and Data cab l e
Modes of Ope ration
TME-3 terminal has three operating modes,
•M2M system mode
•AT command mode.
•User control mode
The M2M system mode offers many unique benefits such as wireless bearer selection
(GPRS, USSD, HSCSD, CSD, SMS), ready made protocol stacks, separation of data transfer
from the application and the possibility to introduce new technologies without changing
the application. It offers an open interface for application developers as well as effective
and reliable methods for controlling the terminal and the application.
In the AT command mode the Nokia 30 GSM Connectivity Terminal can be used as a
wireless modem for data and fax communication when attached to a PC. In addition to a
PC, the terminal can be controlled directly by AT commands by PCs and compatible
devices and machines.
In the user control mode the Nokia 30 GSM Connectivity Terminal is controlled by a
mobile phone. Text message templates that are sent from the mob ile to the Nokia 30
instruct the terminal, which in turn controls a device or machine attached to it through
the M2M System connector.
Data transmission
The Nokia 30 GSM Connectivity Terminal supports five bearers for wireless data transfer,
which can be used where GSM networks support them.
· General Packet Radio Service (GPRS)
· High speed circuit switched data (HSCSD)
· Circuit switched data (CSD)
· Short messages (SMS)
· Unstructured Supplementary Service Data (USSD)
Page 8Nokia Corporation.Issue 3 10/03
Page 9
Company confidentialTME-3
CCS Technical DocumentationGeneral Information
General Packet Switched Service (GPRS) utilizes packet switched technology where
information is transmitted in small bursts of data. The GPRS mobile station class of the
Nokia 30 is class B. This means that both GPRS connections and circuit switched connections are possible, although it has to be defined which one is used each time. The Nokia
30 supports GPRS multi-slot class 6, thus multiple timeslots can be used for data transfer at the same time: 3 + 1, 2 + 2 or 2 + 1 slots.
RS-232 connection: All wireless bearers can be controlled either with AT in the AT Command mode or with CORBA method calls when the terminal is working in the M2M System mode.
User Interface Features
User Interface consist of LED light indicators that show the state of the TME-3 that is
used to remotely control the Nokia 30. Terminals can also be seen as a user interface.
The small SIM (Subscriber Identity Module) card interface supports 3V SIM cards.
Environmental Conditions
Parameter
Ambient temperature -10 to +5520 to 75%
Storage temperature-40 to +855 to 95%, non condensing
TME-3 is not protected against ingress of water.
Free Fall
TME-3 does not break mechanically after free fall from 100 cm height to concrete floor.
Ambient temperature
(degrees Cels ius)
Ambient humidity
(relative)
Issue 3 10/03Nokia Corporation.Page 9
Page 10
TME-3Company confidential
General InformationCCS Technical Documentation
User Interface Features
Three light indicators (LED s) form the user interface of the TME-3.
LED 1 shows the terminal status, while the other two are reserved for the application
module following start-up.
During start-up and special operations, all three light indicators are in terminal use. The
functionality of the light indicators in start-up, normal, and special situations is
described below.
All three LEDs can also be configured so th at they will not show any status and will
remain off during any operation.
Figure 3: UIF LEDs
Led user
interface
Start-up Operation
Table 1: Start-up Operation:
LED 1LED 2Status LED Description
---Power off / silent mode
Green scanGreen scanGreen scanPower on, connecting to network
-Red blink-PIN query / new PIN query
-Red blinkRed blinkPUK query
Intensity of Field Strength:
**Green In service
**Green blinkCall on
**Green blinkIncoming call
**Green/Red blinkMessage received / Voice mail in box
**Red blinkMessage arriving and memory is full
*) Application module controllable in M2M System mode
Special Operation
Table 3: Special Operation:
LED 1LED 2Status LEDDescription
Green/Red blinkGreen/Red blinkGreen/Red blinkInsert SIM card
Red blinkRed blinkRed blinkFailure, contact service
YellowYellowYellowInitialising
SW features
Basic functionality:
Data features:
GSM supplementary services:
Audio features:
Operation modes
Voice, data, fax, SMS
GPRS Class B,
ETSI GSM phase 2+ Network
Digital/analog audios
M2M System mode
AT Command mode
User Control mode
HSCSD, SMS, USSD
M2M system port
Serial Interfaces
PC software
RS232 system port
WIOP sw
Phoenix service software product specific module
Configurator fo r No kia GSM Connectivity Terminal s
Issue 3 10/03Nokia Corporation.Page 11
Page 12
TME-3Company confidential
General InformationCCS Technical Documentation
Power supply
Power supply cord connected to TME-3:
Figure 4: Power to TME-3
With DAU-12 connected the power supply cord is always connected to TME-3
Figure 5: Power supply with DAU-12 connected
Data cable connection
Figure 6: Data cable to DAU-12
Page 12Nokia Corporation.Issue 3 10/03
Loading...
+ hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.