Page 1
Customer Care Solutions
RH-18/36/38 Series Transceivers
Disassembly Instructions
Issue 1 10/03 Nokia Corporation
Page 2
RH-18/36/38 Company confidential
Disassembly Instructions CCS Technical Documentation
[This page left intentionally blank]
Page 2 Nokia Corporation. Issue 1 10/03
Page 3
Company confidential RH-18/36/
CCS Technical Documentation Disassembly Instructions
Table of Contents
Page No
Nokia 1100 Disassembly ............................................................................................... 5
Domesheet Exchange..................................................................................................... 8
Issue 1 10/03 Nokia Corporation. Page 3
Page 4
RH-18/36/38 Company confidential
Disassembly Instructions CCS Technical Documentation
[This page left intentionally blank]
Page 4 Nokia Corporation. Issue 1 10/03
Page 5
Company confidential RH-18/36/
CCS Technical Documentation Disassembly Instructions
Nokia 1100 Disassembly
Disassembly instructions (also see the video clips on care point)
If not already done protect the display window with a
film to avoid dust and scratches.
Open A-Cover from bottom side on. Use SRT-6 to unlock Keymat from A-Cover.
Press the Release Button before removing the Battery Cover.
Now, Keymat can be taken away easily.
Issue 1 10/03 Nokia Corporation. Page 5
Unscrew the six Torx Plus® size 6 screws. For assembly,
the reverse order and a Torx Plus driver with a
torque of 21Ncm have to be used.
Page 6
RH-18/36/38 Company confidential
Disassembly Instructions CCS Technical Documentation
Removee C-Cover from Engine Module. Unlock LCD snaps on both sides of the display.
Remove LCD inclusive Lightguide. Use tweezers when removing the Speaker.
Take Engine Module from D-Cover. Lever out Shielding, beginning from the top side of the
unit.
If System Connector is tight in the D-Cover, SRT-6 should
be used to loosen it.
Page 6 Nokia Corporation. Issue 1 10/03
Carefully push out Microphone from System Connector. Moderate force is required for this action.
Page 7
Company confidential RH-18/36/
CCS Technical Documentation Disassembly Instructions
Lever out Vibra Motor with tweezers. Remove Buzzer from its guidance.Take care not t o dam-
age the spring contacts.
Issue 1 10/03 Nokia Corporation. Page 7
Page 8
RH-18/36/38 Company confidential
Disassembly Instructions CCS Technical Documentation
Domesheet Exchange
Use SRT-6 to loosen one corner of the Domesheet.
Take a new Domesheet from carrier film. Do not touch
the keydomes from lower side.
Tear off Domesheet in diagonal direction to avoid remains of
glue.
Position Domesheet in direction to the upper right corner, as close as possible to the shielding edge.
Slowly place Engine Module from top side on. Before sinking the Engine Module, make sure that it is
also close to the same side of the shielding.
Page 8 Nokia Corporation. Issue 1 10/03
Page 9
Company confidential RH-18/36/
CCS Technical Documentation Disassembly Instructions
Carefully press-on the Domesheet to the module and
avoid bubbles.
Finally check that the holes of the Domesheet match
exactly to the ones in the Engine Module. Otherwise
change Domesheet again!
Issue 1 10/03 Nokia Corporation. Page 9
Page 10
RH-18/36/38 Company confidential
Disassembly Instructions CCS Technical Documentation
[This page left intentionally blank]
Page 10 Nokia Corporation. Issue 1 10/03
Loading...