Nissan SENTRA 2006 User Manual
QU ICK RE FE R E N CE G U I DE
2006 SENTRA
Sh if t_fun
02
TRIP COMPUTER
06
AUDIO SySTEM
01
OUTSIDE MIRROR CONTROL SWITCH
(BEHIND STEERING WHEEL)
TRUNk LID OPENER
HEADLIGHT AND TURN SIGNAL
CONTROL (BEHIND STEERING WHEEL)
04
03
CRUISE CONTROL
05
WINDSHIELD WIPER/
WASHER SWITCH
CLIMATE CONTROLS
01
HEADLIGHT AND TURN SIGNAL CONTROL
HEADLIGHT SWITCH
Turn the headlight switch to the
position to turn on the front parking, tail,
license plate and instrument panel lights.
Turn the headlight switch to the
position to turn on the headlights. All other
lights remain on.
HIGH BEAM
Push the headlight switch forward to select the high beam function. The blue
indicator light illuminates. Pull the headlight switch back to the original position to
select the low beam. The blue indicator light goes off.
Pull and release the headlight switch to flash the headlight high beams on and off.
TURN SIGNAL SWITCH
Move the headlight control switch up or down to signal the turning direction.
When the turn is completed, the turn signals cancel automatically.
To signal a lane change, move the headlight control switch up or down to the
point where the indicator light begins to flash, but the headlight control switch
does not latch.
FOG LIGHT OPERATION (if so equipped)
Note: The headlights must be on and the low beams selected for the fog lights to
operate.
Turn the switch to the position to turn on the fog lights.
Turn the switch to the OFF position to turn off the fog lights.
02
TRIP COMPUTER (if so equipped)
The trip computer readout is in the speedometer
display. It can show the following items:
TRIP “A” – Measures the distance of one
specific trip.
TRIP “B” – Measures the distance of a
second specific trip.
OUTSIDE AIR TEMPERATURE – The
temperature is displayed in °F or °C. The
word “ICY” will display if temperatures are below 37°F (3°C).
DISTANCE TO EMPTY (dte) – Estimates the distance that can be driven
before refueling.
AVERAGE FUEL CONSUMPTION – (mpg or l/100km) Shows the average fuel
consumption since the last reset.
AVERAGE SPEED – (mph or km/h) Shows the average speed since the last reset.
JOURNEY TIME – Shows the time since the last reset.
RESET – Press the CHANGE button on the instrument panel for more than
1 second to reset the trip odometer to zero.
With the ignition key in the ON position or the vehicle running, you can select an
item by pressing the CHANGE button on the instrument panel.
03
CRUISE CONTROL (if so equipped)
To activate the cruise control, push the
(ON/OFF) switch on. The indicator light
in the instrument panel comes on.
To set cruising speed, accelerate the
vehicle to desired speed, push the
COAST/SET switch and release it. The
SET indicator light in the instrument
panel will illuminate.
To reset at a faster cruising speed, push and hold the ACCEL/RES switch.
When the vehicle attains the speed you desire, release the switch.
To reset at a slower cruising speed, push and hold the COAST/SET switch.
Release the switch when the vehicle slows to the desired speed.
To resume a preset speed, push and release the ACCEL/RES switch. The
vehicle returns to the last set cruising speed when the vehicle speed is over 30
MPH (48 km/h).
To cancel cruise control, push the CANCEL switch. The SET indicator light in
the instrument panel will go out.
To turn off cruise control, push the (ON/OFF) switch. Both the CRUISE
indicator light and the SET light in the instrument panel will go out.
04
WINDSHIELD WIPER/WASHER SWITCH
The ignition switch must be in the ON
position to activate the windshield
wipers.
Push the lever down to operate the
windshield wipers.
Switch operation includes:
Intermittent (if so equipped) – Wipers
operate intermittently and can be
adjusted by turning the time control.
Low speed – Wipers operate at a continuous low speed.
High speed – Wipers operate at a continuous high speed.
Wash – Pull the lever toward you. Wipers automatically wipe several times.
Loading...