For your safety, read carefully and keep in this vehicle.
FOREWORDREAD FIRST—THEN DRIVE SAFELY
Welcome to the growing family of new NISSAN
owners. This vehicle is delivered to you with
confidence. It was produced using the latest
techniques and strict quality control.
This manual was prepared to help you understand the operation and maintenance of your
vehicle sothat you may enjoy many miles (kilometers) of driving pleasure. Please read through this
manual before operating your vehicle.
A separate Warranty Information Booklet
explains details about the warranties covering your vehicle. The “NISSAN Service
and Maintenance Guide” explains details
about maintaining and servicing your vehicle. Additionally, a separate Customer
Care/Lemon Law Booklet (U.S. only) will
explain how to resolve any concerns you
may have with your vehicle, as well as
clarify your rights under your state’s lemon
law.
Your NISSAN dealership knows your vehicle
best. When you require any service or have any
questions, they will be glad to assist you with the
extensive resources available to them.
In addition to factory installed options, your vehicle may also be equipped with additional accessories installed by NISSAN or by your
NISSAN dealer prior to delivery. It is important
that you familiarize yourself with all disclosures,
warnings, cautions and instructions concerning
proper use of such accessories priorto operating
the vehicle and/or accessory. See a NISSAN
dealer for details concerning the particular accessories with which your vehicle is equipped.
Before driving your vehicle, please read this
Owner’s Manual carefully. This will ensure familiarity with controls and maintenance requirements, assisting you in the safe operation of your
vehicle.
WARNING
IMPORTANT SAFETY INFORMATION REMINDERS FOR SAFETY!
Follow these important driving rules to
help ensure a safe and comfortable trip
for you and your passengers!
● NEVER drive under the influence of alcohol or drugs.
● ALWAYS observe posted speed limits
and never drive too fast for conditions.
ALWAYS give your full attention to driving
●
and avoid using vehicle features or taking
other actions that could distract you.
●
ALWAYS use your seat belts and appropriate child restraint systems. Preteen
children should be seated in the rear seat.
● ALWAYS provide information about the
proper use of vehicle safety features to
all occupants of the vehicle.
● ALWAYS review this Owner’s Manual
for important safety information.
WHEN READING THE MANUAL
MODIFICATION OF YOUR VEHICLE
This vehicle should not be modified.
Modificationcouldaffectits
performance, safety or durability, and
mayevenviolategovernmental
regulations. In addition, damage or performance problems resulting from modifications may not be covered under
NISSAN warranties.
This manual includes information for all features
and equipment available on this model. Features
and equipment in your vehicle may vary depending on model, trim level, options selected, order,
date of production, region or availability. Therefore, you may find information about features or
equipment that are not included or installed on
your vehicle.
All information, specifications and illustrations in
this manual are those in effect at the time of printing. NISSAN reserves the right to change specifications, performance, design or component suppliers without notice and without obligation. From
time to time, NISSAN may update or revise this
manual to provide Owners with the most accurate
information currently available. Please carefully
read and retain with this manual all revision updates sent to you by NISSAN to ensure you have
access to accurate and up-to-date information regarding your vehicle. Current versions of vehicle
Owner’s Manuals and any updates can also be
found inthe Owner section of the NISSAN website
athttps://owners.nissanusa.com/nowners/
navigation/manualsGuide. If you have questions
concerning any information in your Owner’s
Manual, contact NISSAN Consumer Affairs. See
the NISSAN CUSTOMER CARE PROGRAM
page in this Owner’s Manual for contact information.
IMPORTANT INFORMATION ABOUT
THIS MANUAL
You will see various symbols in this manual. They
are used in the following ways:
WARNING
This is used to indicate the presence of a
hazard that could cause death or serious
personal injury. To avoid or reduce the
risk, the procedures must be followed
precisely.
CAUTION
This is used to indicate the presence of a
hazard that could cause minor or moderate personal injury or damage to your vehicle. To avoid or reduce the risk, the procedures must be followed carefully.
APD1005
If yousee this symbol, it means “Do not do this”
or “Do not let this happen.”
If you see a symbol similar to these in an illustration, it means the arrow points to the front of the
vehicle.
Arrows in an illustration that are similar to these
indicate movement or action.
Arrows in an illustration that are similar to these
call attention to an item in the illustration.
CALIFORNIA PROPOSITION 65
WARNING
WARNING
Engine exhaust, some of its constituents,
and certain vehicle components contain or
emit chemicals known to the State of California to cause cancer and birth defects or
other reproductive harm. In addition, certain fluids contained in vehicles and certain products of component wear contain
or emit chemicals known to the State of
California to cause cancer and birth defects or other reproductive harm.
CALIFORNIA PERCHLORATE
ADVISORY
Some vehicle parts, such as lithium batteries, may contain perchlorate material. The
following advisory is provided: “Perchlorate
Material – special handling may apply, See
www.dtsc.ca.gov/hazardouswaste/perchlorate/”.
BLUETOOTH® is a
trademark owned by
Bluetooth SIG, Inc.
and licensed to
Visteon and Clarion.
SiriusXM Satellite
Radio requires
subscription, sold
separately. Not
available in Alaska,
Hawaii or Guam.
For more
information, visit
www.siriusxm.com.
All rights reserved. No part of this Owner’s
Manual may be reproduced or stored in a retrieval
system, or transmitted in any form, or by any
means, electronic, mechanical, photocopying,
recording or otherwise, without the prior written
permission of Nissan North America, Inc.
NISSAN CUSTOMER CARE PROGRAM
NISSAN CARES...
Both NISSAN and your NISSAN dealer are dedicated to serving all your automotive needs. Your satisfaction with your vehicle and your NISSAN dealer are
our primary concerns. Your NISSAN dealer is always available to assist you with all your automobile sales and service needs.
However, if there is something that your NISSAN
dealer cannot assist you with or you would like to
provide NISSAN directly with comments or
questions, please contact the NISSAN Consumer Affairs Department using our toll-free
number:
For U.S. customers
1-800-NISSAN-1
(1-800-647-7261)
For Canadian customers
1-800-387-0122
We appreciate your interest in NISSAN and thank you for buying a quality NISSAN vehicle.
The Consumer Affairs Department will ask for the
following information:
– Your name, address, and telephone number
– Vehicle identification number (attached to the
top of the instrument panel on the driver’s
side)
– Date of purchase
– Current odometer reading
– Your NISSAN dealer’s name
– Your comments or questions
OR
You can write to NISSAN with the information at:
For U.S. customers
Nissan North America, Inc.
Consumer Affairs Department
P.O. Box 685003
Franklin, TN 37068-5003
or via e-mail at:
nnaconsumeraffairs@nissan-usa.com
For Canadian customers
Nissan Canada Inc.
5290 Orbitor Drive
Mississauga, Ontario L4W 4Z5
or via e-mail at:
information.centre@nissancanada.com
If you prefer, visit us at:
www.nissanusa.com (for U.S. customers) or
www.nissan.ca (for Canadian customers)
Table of
Illustrated table of contents
0
Contents
Safety—Seats, seat belts and supplemental restraint system
Instruments and controls
Pre-driving checks and adjustments
Monitor, climate, audio, phone and voice recognition systems
Starting and driving
In case of emergency
Appearance and care
Maintenance and do-it-yourself
Technical and consumer information
Index
1
2
3
4
5
6
7
8
9
10
0Illustrated table of contents
Air bags, seat belts and child restraints ..............0-2
Exterior front ......................................0-3
Supplemental restraint system .....................1-42
Precautions on supplemental restraint
system .......................................1-42
Supplemental air bag warning labels .............1-56
Supplemental air bag warning light ..............1-56
SEATS
● Do not adjust the driver’s seat while
driving so full attention may be given to
vehicle operation. The seat may move
suddenly and could cause loss of control of the vehicle.
● The seatback should not be reclined
any more than needed for comfort. Seat
belts are most effective when the passenger sits well back and straight up in
the seat. If the seatback is reclined, the
risk of sliding under the lap belt and
being injured is increased.
WARNING
● Do not ride in a moving vehicle when
the seatback is reclined. This can be
dangerous. The shoulder belt will not
be against your body. In an accident,
you could be thrown into it and receive
neck or other serious injuries. You
could also slide under the lap belt and
receive serious internal injuries.
● For the most effective protection when
the vehicle is in motion, the seat should
be upright. Always sit well back in the
seat with both feet on the floor and
adjust the seat properly. See “Precautions on seat belt usage” later in this
section.
● After adjustment, gently rock in the seat
to make sure it is securely locked.
● Do not leave children unattended inside
the vehicle. They could unknowingly activate switches or controls. Unattended
children could become involved in serious accidents.
1-2 Safety—Seats, seat belts and supplemental restraint system
ARS1152
CAUTION
When adjusting the seat positions, be
sure not to contact any moving parts to
avoid possible injuries and/or damage.
FRONT POWER SEAT ADJUSTMENT
Operating tips
● The power seat motor has an auto-reset
overload protection circuit. If the motor
stops during operation, wait 30 seconds,
then reactivate the switch.
● Do not operate the power seat switch for a
long period of time when the engine is off.
This will discharge the battery.
See “Automatic drive positioner” in “Pre-driving
checks and adjustments” for automatic drive positioner operation.
The reclining feature allows adjustment of the
seatback for occupants of different sizes for
added comfort and to help obtain proper seat
belt fit.See “Precautionson seat belt usage”later
in this section. Also, the seatback can be reclined
to allow occupants to rest when the vehicle is
stopped and the shift lever is in P (Park).
LRS2190
Forward and backward
Moving the switch forward or backward will slide
the seat forward or backward to the desired
position.
Reclining
Move the recline switch backward until the desired angle is obtained. To bring the seatback
forward again, move the switch forward and
move your body forward. The seatback will move
forward.
Safety—Seats, seat belts and supplemental restraint system 1-3
LRS2191
Seat lifter (driver’s seat)
Push the front or rear end of the switch up or
down to adjust the angle and height of the seat
cushion.
Lumbar support (driver’s seat)
The lumbar support feature provides adjustable
lower back support to the driver. Move the lever
up or down (manual) or move the switch forward
or backward (power) to adjust the seat lumbar
area.
Manual (if so equipped)
1-4 Safety—Seats, seat belts and supplemental restraint system
LRS0862
LRS2192
Power (if so equipped)
LRS0863
Thigh extension (driver’s side only, if
so equipped)
Pull up and hold the lever to extend the front
portion to the desired position.
FOLDING REAR SEAT (if so
equipped)
WRS0866
Interior trunk access
For models without a rear center console, the
trunk can be accessed from the passenger side
of the rear seat for loading and unloading, as
shown.
1
Press down on the button on the rear parcel
䊊
shelf.
2
Fold down the passenger side seatback.
䊊
WARNING
● Never allow anyone to ride in the cargo
area or on the rear seat when it is in the
fold-down position. Use of these areas
by passengers without proper restraints
could result in serious injury in an accident or sudden stop.
● Properly secure all cargo with ropes or
straps to help prevent it from sliding or
shifting. Do not place cargo higher than
the seatbacks. In a sudden stop or collision, unsecured cargo could cause
personal injury.
Safety—Seats, seat belts and supplemental restraint system 1-5
● When returning the seatbacks to the
upright position, be certain they are
completely secured in the latched position. If they are not completely secured,
passengers may be injured in an accident or sudden stop.
● Closely supervise children when they
are around cars to prevent them from
playing and becoming locked in the
trunk where they could be seriously injured. Keep the car locked, with the rear
seatback and trunk lid securely latched
when not in use, and prevent children’s
access to car keys.
Tofold down the driver side of the rear seat, reach
through the opening and pull on the strap
located behind the seat.
The rear seats can be locked using the mechanical key to prevent unauthorized access.
1-6 Safety—Seats, seat belts and supplemental restraint system
WRS0867LPD0459
Secondary trunk lid release (if so
1
䊊
equipped)
For models with a rear center console, the trunk
can be accessed through the access panel between the rear seats, as shown.
● Fold down the center arm rest.
● Insert the mechanical keyinto the trunk com-
partment access lid lock. Fold down the
trunk compartment access lid. For more information on the mechanical key, see
“NISSAN Intelligent Key® ” in the Predriving checks and adjustments chapter.
● Pull the rear seat trunk release handle
䊊
1
.
WRS0868LRS2000
Center armrest
Pull the armrest down until it rests on the seat
cushion.
FRONT SEAT HEAD RESTRAINTS/
HEADRESTS
WARNING
● Head restraints/headrests supplement
the other vehicle safety systems. They
may provideadditional protection
against injury in certain rear end collisions.Adjustthehead
restraints/headrests properly, as specified in this section. Check the adjustment after someone else uses the seat.
Do not attach anything to the head
restraint/headrest stalks or remove the
head restraints/headrests. Do not use
the seat if the head restraint/headrest
has been removed.If the head
restraint/headrest was removed, reinstall and properly adjust the head
restraint/headrest before an occupant
uses the seating position. Failure to follow these instructions can reduce the
effectivenessofthehead
restraints/headrests. This may increase
the risk of serious injury or death in a
collision.
Safety—Seats, seat belts and supplemental restraint system 1-7
The illustration shows the seating positions
equipped with head restraints/headrests. The
head restraints in the front seats are adjustable
and removable.
䉱 Indicates the seating position is equipped with
a head restraint.
䡲 Indicates the seating position is equipped with
a headrest.
+ Indicates the seating position is not equipped
with a head restraint or headrest.
● Your vehicle is equipped with a head
restraint/headrest that may be integrated,
adjustable or non-adjustable.
● Adjustable head restraints/headrests have
multiple notches along the stalk to lock them
in a desired adjustment position.
● Thenon-adjustablehead
restraints/headrests have a single locking
notch to secure them to the seat frame.
● Proper Adjustment:
– For the adjustable type, align the head
restraint/headrest so the center of your
ear is approximately level with the center
of the head restraint/headrest.
– If your ear position is still higher than the
recommended alignment, place the head
restraint/headrest at the highest position.
● If the head restraint/headrest has been removed, ensure that it is reinstalled and
locked in place before riding in that designated seating position.
LRS2300LRS2299
Adjustable head restraint/headrest
components
1. Removable head restraint/headrest
2. Multiple notches
3. Lock knob
4. Stalks
Non-adjustable head restraint/
headrest components
1. Removable head restraint/headrest
2. Single Notch
3. Lock knob
4. Stalks
1-8 Safety—Seats, seat belts and supplemental restraint system
LRS2302LRS2303WRS0134
Removable
Use the following procedure to remove the head
restraints/headrests.
1. Pull the head restraint/headrest up to the
highest position.
2. Push and hold the lock knob.
3. Remove the head restraint/headrest from
the seat.
Store the head restraint/headrest properly in a
4.
secure place so it is not loose in the vehicle.
5. Reinstall and properly adjust the head
restraint/headrest before an occupant uses
the seating position.
Install
1. Align the head restraint/headrest stalks with
the holes in the seat. Make sure the head
restraint/headrest is facing the correct direction. The stalk with the notch (notches)
1
must be installed in the hole with the lock
䊊
2
.
knob
䊊
2. Push and hold the lock knob and the head
restraint/headrest down.
3. Properly adjust the head restraint/headrest
before an occupant uses the seating position.
Safety—Seats, seat belts and supplemental restraint system 1-9
For adjustable head restraint/headrest
Adjust the head restraint/headrest so the center
is level with the center of your ears. If your ear
position is still higher than the recommended
alignment, place the head restraint/headrest at
the highest position.
LRS2351LRS2305LRS2306
For non-adjustable head restraint/
headrest
Make sure the head restraint/headrest is positioned so the lock knob is engaged in the notch
before riding in that designated seating position.
To raise the head restraint/headrest,
pull it up.
Make sure the head restraint/headrest is positioned so the lock knob is engaged in the notch
before riding in that designated seating position.
1-10 Safety—Seats, seat belts and supplemental restraint system
To lower, push and hold the lock knob
and push the head restraint/headrest
down.
Make sure the head restraint/headrest is positioned so the lock knob is engaged in the notch
before riding in that designated seating position.
REAR SEAT HEAD RESTRAINTS/
HEADRESTS
WARNING
● Head restraints/headrests supplement
the other vehicle safety systems. They
may provideadditional protection
against injury in certain rear end collisions.Adjustthehead
restraints/headrests properly, as specified in this section. Check the adjustment after someone else uses the seat.
Do not attach anything to the head
restraint/headrest stalks or remove the
head restraint/headrest. Do not use the
seat if the head restraint/headrest has
beenremoved.Ifthehead
restraint/headrest was removed, reinstall and properly adjust the head
restraint/headrest before an occupant
uses the seating position. Failure to follow these instructions can reduce the
effectivenessofthehead
restraints/headrests. This may increase
the risk of serious injury or death in a
collision.
LRS2000
The illustration shows the seating positions
equipped with head restraints/headrests. The
rear outboard seating positions are adjustable
and removable. The center rear position headrest
does not adjust and is not removable.
䉱 Indicates the seating position is equipped with
a head restraint.
䡲 Indicates the seating position is equipped with
a headrest.
+ Indicates the seating position is not equipped
with a head restraint or headrest.
● Your vehicle is equipped with a head
restraint/headrest that may be integrated,
adjustable or non-adjustable.
● Adjustable head restraints/headrests have
multiple notches along the stalk to lock them
in a desired adjustment position.
The non-adjustable head restraints/headrests
●
have a single locking notch to secure them to
the seat frame.
● Proper Adjustment:
– For the adjustable type, align the head
restraint/headrest so the center of your
ear is approximately level with the center
of the head restraint/headrest.
– If your ear position is still higher than the
recommended alignment, place the head
restraint/headrest at the highest position.
● If the head restraint/headrest has been removed, ensure that it is reinstalled and
locked in place before riding in that designated seating position.
Safety—Seats, seat belts and supplemental restraint system 1-11
LRS2310LRS2315LRS2074
Adjustable head restraint/headrest
components
1. Removable head restraint/headrest
2. Multiple notches
3. Lock knobs
4. Stalks
Non-adjustable head restraint/
headrest components
1. Removable head restraint/headrest
2. Single Notch
3. Lock knobs
4. Stalks
1-12 Safety—Seats, seat belts and supplemental restraint system
Removal
Use the following procedure to remove the head
restraints/headrests.
1. Adjust the seat or seatback as necessary.
2. Push and hold the lock knobs.
3. Pull the head restraint/headrest up until it is
removed from the seat.
4. Store the head restraint/headrest properly
so it is not loose in the vehicle.
5. Reinstall the head restraint/headrest and
properly adjust the seat or seatback before
an occupant uses the seating position.
LRS2075WRS0134LRS2351
Install
1. Align the head restraint/headrest stalks with
the holes in the seat. Make sure the head
restraint/headrest is facing the correct direction.
2. Push the head restraint/headrest down until
it locks in place.
For adjustable head restraint/headrest
Adjust the head restraint/headrest so the center
is level with the center of your ears. If your ear
position is still higher than the recommended
alignment, place the head restraint/headrest at
the highest position.
Safety—Seats, seat belts and supplemental restraint system 1-13
For non-adjustable head restraint/
headrest
Make sure the head restraint/headrest is positioned so the lock knob is engaged in the notch
before riding in that designated seating position.
Loading...
+ 402 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.