Ninja CT680CO2SS User Manual

Ninja® Intelli-Sense™ Touchscreen Blend & Prep System
CT680CO2SS
INSTRUCTIONS
ninjakitchen.com
1-877-646-5288
THANK YOU
for purchasing the Ninja® Intelli-Sense™ Touchscreen Blend & Prep System
CONTENTS
TIP: You can find the
model and serial numbers on the QR code label located near the rating label.
REGISTER YOUR PURCHASE
registeryourninja.com
1-877-646-5288
Scan QR code using mobile device
RECORD THIS INFORMATION
Model Number: ��������������������������������������
Serial Number: ��������������������������������������
Date of Purchase (Keep receipt): �����������������������
Store of Purchase: �����������������������������������
TECHNICAL SPECIFICATIONS
Voltage: 120V, 60Hz
Watts: 1200W
Important Safety Instructions � � � � � � � � � � � � � � � � � � � � � � � � � � � 3
Getting to Know Your Ninja® Intelli-Sense™ Touchscreen Blend & Prep System � � � � � � � � � � � � � � � � � � � � � � � 7
Before First Use � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 8
Features � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 9
Total Crushing® Blender Pitcher � � � � � � � � � � � � � � � � � � � � � � � � � � � 9 Precision Processor™ Bowl � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � �10
Using Your Total Crushing Blender Pitcher � � � � � � � � � � � � � � �11
Using your Precision Processor Bowl � � � � � � � � � � � � � � � � � � � 15
Using Your Slicing/Shredding Disc � � � � � � � � � � � � � � � � � � � � � 17
Care & Maintenance � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 21
Cleaning � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 21 Storing � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 21 Resetting the Motor Thermostat � � � � � � � � � � � � � � � � � � � � � � � � � � � 21 Ordering Replacement Parts � � � � � � � � � � � � � � � � � � � � � � � � � � � � � �21
Troubleshooting Guide � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 22
Warranty � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 23
PLEASE READ CAREFULLY AND KEEP FOR FUTURE REFERENCE�
These instructions are designed to help youget a complete understanding of your newNinja Intelli-Sense Touchscreen Blend & Prep System.
If you have any questions, please call our Customer Service line at 1-877-646-5288.
1 21- 877-646-5288 ninjakitchen.com
IMPORTANT SAFETY INSTRUCTIONS
PLEASE READ CAREFULLY BEFORE USE • FOR HOUSEHOLD USE ONLY
WARNING
When using electrical appliances, basic safety precautions should always be
followed, including the following:
1 Read all instructions prior to using the
appliance and its accessories.
2 Carefully observe and follow all warnings
and instructions. This unit contains electrical connections and moving parts that potentially present risk to the user.
3 This product is provided with a Stacked
Blade Assembly and a Chopping Blade Assembly. Always exercise care when handling blade assemblies. The blade assemblies are sharp and are NOT locked in place in their containers. The blade assemblies are designed to be removable to facilitate cleaning and replacement if needed. ONLY grasp the blade assembly by the top of the shaft. Failure to use care when handling the blade assemblies will result in a risk of laceration.
4 Take your time and exercise care during
unpacking and appliance setup. This appliance contains sharp, loose blades that can cause injury if mishandled.
5 Take inventory of all contents to ensure that
you have all parts needed to properly and safely operate your appliance.
6 Unplug the appliance from the outlet
when not in use, before assembling or disassembling parts, and before cleaning. To unplug, grasp the plug by the body and pull from the outlet. NEVER unplug by grasping and pulling the flexible cord.
7 Before use, wash all parts that may contact
food. Follow washing instructions covered in this instructionmanual.
8 To protect against the risk of electric
shock, DO NOT submerge the appliance or allow the power cord to contact any form of liquid.
9 DO NOT use this appliance outdoors. It is
designed for indoor household use only.
10 This appliance has a polarized plug (one
prong is wider than the other). To reduce the risk of electric shock, this plug will fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. DO NOT modify the plug in any way.
11 DO NOT operate any appliance with
a damaged cord or plug, or after the appliance malfunctions or is dropped or damaged in any manner. This appliance has no user-serviceable parts. If damaged, contact SharkNinja for servicing.
12 This appliance has important information
on the plug prong. The power cord is not suitable for replacement. If damaged, contact SharkNinja for servicing in order to avoid a hazard.
13 Extension cords should NOT be used with
this appliance.
14 DO NOT allow young children to operate
this appliance or use as a toy. Close supervision is necessary when any appliance is used near children.
15 This appliance is NOT intended to be used
by people (including children) with reduced physical, sensory, or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
16 Before each use, inspect blade assemblies
for damage. If a blade is bent or damage is suspected, contact SharkNinja to arrange for replacement.
17 DO NOT attempt to sharpen blades.
18 DO NOT allow the unit or the cord to hang
over the edges of tables or counters. The cord may become snagged and pull the appliance off the work surface.
19 DO NOT allow the unit or the cord to
contact hot surfaces, including stoves and other heating appliances.
20 ALWAYS use the appliance on a dry and
level surface.
21 NEVER place a blade assembly on the
motor base without it first being attached to its corresponding container (bowl, pitcher, cup) and lid.
CONTINUED ON PAGE 5
SAVE THESE INSTRUCTIONS�
3 41-877-646-5288 ninjakitchen.com
IMPORTANT SAFETY INSTRUCTIONS
PLEASE READ CAREFULLY BEFORE USE • FOR HOUSEHOLD USE ONLY
WARNING
When using electrical appliances, basic safety precautions should always be
followed, including the following:
22 Keep hands, hair, and clothing out of the
container when loading and operating.
23 ONLY use attachments and accessories
that are provided with the product or are recommended by SharkNinja. The use of attachments not recommended or sold by SharkNinja may cause fire, electric shock or injury.
24 During operation and handling of the
appliance, avoid contact with moving parts.
25 DO NOT operate the appliance with an
empty container.
26 DO NOT fill containers past the MAX FILL
or MAX LIQUID lines.
27 DO NOT microwave any containers or
accessories provided with the appliance.
28 Before operation, ensure that all utensils
are removed from containers. Failure to remove utensils can cause containers to shatter and potentially result in personal injury and property damage.
29 When processing food, ALWAYS use the
Food Pusher. NEVER feed ingredients into the Feed Chute Lid by hand or with other utensils. Failure to use the Food Pusher may cause personal injury.
30 NEVER operate the appliance without lids
and caps in place. DO NOT attempt to defeat the interlock mechanism. Ensure that the container and lid are properly installed before operation.
31 DO NOT remove Feed Chute Lid until
Blade Disc stops spinning.
32 DO NOT expose the containers and
accessories to extreme temperature changes. They may experience damage.
33 NEVER leave the appliance unattended
while in use.
34 DO NOT open pour spout cap while
blender is operating.
35 DO NOT blend hot liquids. Doing so
may result in pressure buildup and steam exposure that can pose a risk of the user being burned.
36 If you find unmixed ingredients sticking to
the sides of the pitcher, stop the appliance, remove the lid, and use a spatula to dislodge ingredients. NEVER insert your hands into the pitcher, as you may contact one of the blades and experience a laceration.
37 DO NOT attempt to remove the container
and lids from the motor base while the blade assembly is still spinning. Allow the appliance to come to a complete stop before removing lids and containers.
38 Upon completion of processing, ensure
that the blade assembly is removed BEFORE emptying container’s contents. Remove the blade assembly by carefully grasping the top of the shaft and lifting it from the container. Failure to remove the blade assembly before emptying the container results in a risk of laceration.
39 If the appliance overheats, a thermal switch
will activate and temporarily disable the motor. To reset, unplug the appliance and allow it to cool for approximately 15 minutes before using again.
40 Always exercise care when handling the
Slicing/Shredding Disc, as it is sharp. Use the finger holes when placing or removing disc. Failure to use the finger holes will result in a risk of laceration.
41 DO NOT submerge the motor base or
touchscreen in water or other liquids. DO NOT spray the motor base or touchscreen with any liquid. Turn off and unplug the motor base before cleaning.
42 DO NOT overfill.
43 DO NOT remove the container from
the motor base while the appliance is in operation.
44 Keep hands, hair, clothing, as well as
utensils out of container while processing to reduce the risk of severe injury to persons or damage to the appliance. A scraper may be used but only when the appliance is not running.
45 Avoid contact with moving parts.
46 DO NOT attempt to operate the appliance
without the lid on.
SAVE THESE INSTRUCTIONS�
5 61-877- 64 6-528 8 ninjakitchen.com
GETTING TO KNOW YOUR NINJA® INTELLI-SENSE™ TOUCHSCREEN BLEND & PREP SYSTEM
BEFORE FIRST USE
WELCOME!
Congratulations on your purchase. Use this instruction manual to learn about the great features of your Ninja Intelli-Sense Touchscreen Blend & Prep System. From assembly to use to maintenance, you will find it all in here.
There are a variety of accessories that are compatible with this blenderseries.
NOTE:
The top flap of
your box shows the select accessories that are included with your model.
If you have any questions, concerns or feedback, we’d love to hear from you. Give us a call at 1-877-646-5288 or visit ninjakitchen.com.
*64 oz. max liquid capacity.
A
B C
D
MAIN UNIT A Pitcher Lid B 72 oz. Total Crushing C Stacked Blade Assembly D Motor Base with Smart Vessel Recognition E Reversible Slicing/Shredding Disc F Spindle for Slicing/Shredding Disc G Two-Part Pusher for Feed Chute Lid H Feed Chute Lid I Dough Blade Assembly J Chopping Blade Assembly
K Precision Processor
®
Blender Pitcher*
Bowl
E
IMPORTANT: Review all
warnings on pages 3–6 before proceeding.
G
H
IF
J
K
DID YOU KNOW?
• All containers, blade assemblies, and lids are BPA free and dishwasher safe.
1 Remove all packaging materials from the appliance.
Exercise care when unpacking blade assemblies. All blade assemblies are sharp.
2 The Chopping Blade Assembly and Stacked Blade
Assembly are NOT locked in place in their containers. Handle the Chopping Blade Assembly and Stacked Blade Assembly by grasping the top of the shaft.
3 Wash containers, lids, and blade assemblies in warm,
soapy, water using a dishwashing utensil with a handle to avoid direct contact with the blades. Exercise care when handling blade assemblies, as the blades are sharp.
4 Thoroughly rinse and air-dry all parts.
5 All attachments are dishwasher safe. It is recommended
that the lids, containers, and blade assemblies be placed on the top rack of the dishwasher. Ensure blade assemblies are removed from their containers before placing in the dishwasher. Exercise care when handling blade assemblies.
6 Wipe touchscreen with a soft cloth. Allow it to dry
completely before using.
7 81-877-646-5288 ninjakitchen.com
FEATURES
SMART PROGRAMS FOR THE TOTAL CRUSHING® BLENDER PITCHER
Intelligent pre-set programs combine unique blending and pausing patterns that do the work for you. Once a pre-set program is selected, it will start immediately. Press STOP to end it.
The power symbol should be used to turn your appliance on or off.
SMOOTHIE
Make super-smooth, sippable drinks and shakes from fresh or frozen fruit, milk, liquids, and ice
ICE CREAM
Create delicious and scoop-able frozen desserts like ice cream or sorbet.
.
FROZEN DRINK
Turn ice, juices, and fruit into expertly blended frozen drinks.
SNOW CONE
Pulverize ice into frozen creations like snow cones, slushies, or granitas.
SMART PROGRAMS FOR THE PRECISION PROCESSOR™ BOWL Intelligent pre-set programs combine unique blending and pausing patterns that do the work for you. Once a pre-set program is selected, it will start immediately. Press STOP to end it.
The power symbol should be used to turn your appliance on or off.
PUREE Create anything from silky smooth sauces to the perfect hummus.
DOUGH Ideal for creating delicious dough for pizza, bread, and baked goods like cookies.
CHOP Timed pulses and pauses to give you consistent chopping results.
DIPS Use for dips and sides with more texture like spinach and artichoke dip or mashed potatoes.
LOW, HIGH, and PULSE
When selected, each of these programs runs continuously until turned off. They do not work in conjunction with any pre-set programs.
9 101- 877-646-5288 ninjakitchen.com
LOW, HIGH, and PULSE
When selected, each of these programs runs continuously until turned off. They do not work in conjunction with any pre-set programs.
USING YOUR TOTAL CRUSHING® BLENDER PITCHER
IMPORTANT: Review all
warnings on pages 3–6 before proceeding.
TIP: If the Stacked Blade Assembly is not fully seated, you will not be able to install and lock the lid.
TIP: To learn more about the unit’s programs, refer to page 9.
NOTE: Pre-set programs have pauses and changes in speed throughout the cycle.
NOTE: DO NOT add ingredients before completing installation of the Stacked Blade Assembly.
1
NOTE: The pitcher can only
be installed in one orientation. The handle must be positioned on the front-right corner of the motor base to operate the appliance.
11 121- 877-646-5288 ninjakitchen.com
Place the unplugged motor base on a clean, dry, and level surface such as a countertop or table. Press downward on the motor base to adhere the suction cups to the work surface. Ensure the motor base is connected to power.
2
Lower the Total Crushing Blender pitcher onto the motor base. The handle should be aligned slightly to the right and the pitcher should be oriented so the LOCK symbols are visible on the motor base. Then rotate the pitcher clockwise until it clicks into place.
3 Exercising care, grasp the
Stacked Blade Assembly by the top of the shaft and place it onto the drive gear inside the pitcher. Note that the blade assembly will fit loosely onto the drive gear.
4 Add ingredients, making
sure to not exceed the Max Fill line marked on the side of the pitcher.
5 Place the lid on the pitcher,
aligning the triangle symbol located on the lid with the triangle symbol located on the pitcher’s handle. Press down on the handle until it clicks into place. The triangle symbols MUST be aligned for the lid to lock onto place and the unit to operate. When the unit is connected to power and the container is correctly locked into the motor base, the available program buttons will illuminate and the unit will be ready for use.
USING YOUR TOTAL CRUSHING® BLENDER PITCHER - CONT�
IMPORTANT: Review all
warnings on pages 3–6 before proceeding.
IMPORTANT: As a safety feature, if the pitcher and lid are not properly installed, the timer will display “- --” and the motor will be disabled. If this happens, repeat step 5 on the previous page. When the pitcher and lid are properly installed, the program buttons will illuminate steadily, indicating the appliance is ready for use.
NOTE: Smart Vessel Recognition can detect which container is on the motor base. Only the functions available for a particular container will illuminate on the touchscreen.
6 If using a pre-set program,
first select the program that best suits your recipe. The pre-set feature will automatically stop the appliance at the end of the program. To pause the unit at any time, press the currently active button a second time. Reference page 10 for program descriptions.
7 If not using a pre-set
program and ingredients have reached your desired consistency, stop the appliance by releasing the manual speed button, and wait for the appliance to come to a complete stop.
8 To remove the pitcher from
the motor base, turn the pitcher counterclockwise and lift it up.
9 To pour out thinner
mixtures, ensure the lid is locked in place, then open the pour spout cap.
10 For thicker mixtures
that cannot be emptied through the pour spout, remove the lid and Stacked Blade Assembly before pouring. To remove the lid, press the RELEASE button and lift the handle. To remove the blade assembly, carefully grasp it by the top of the shaft. The pitcher can then be emptied.
11 Unplug the unit when
finished. To release the motor base, place your hands underneath both sides of the motor base and gently pull the unit up and towards you. Refer to page 29 for storing instructions.
13 141-87 7-646 -5288 ninjakitchen.com
USING YOUR PRECISION PROCESSOR™ BOWL
IMPORTANT: Review all
warnings on pages 3–6 before proceeding.
TIP: If the blade assembly is not fully seated, you will not be able to install and lock the lid into position.
TIP: To learn more about the unit’s programs, refer to page 10.
NOTE: Pre-set programs have pauses and changes in speed throughout the cycle.
NOTE: DO NOT add ingredients before installing the blade assembly.
1
Place the unplugged motor base on a clean, dry, and level surface such as a countertop or table. Press downward on the motor base to adhere the suction cups to the work surface. Plug the motor base into a wall outlet.
15 161 -877-646-528 8 ninjakitchen.com
2 Lower the Precision
Processor bowl onto the motor base.
3
Rotate Precision Processor™ bowl clockwise until it clicks into place.
4 Exercising care, grasp the
Chopping Blade Assembly by the top of the shaft and place it onto the drive gear inside the bowl. Note that the Chopping Blade Assembly will fit loosely onto the drive gear.
5 Add ingredients to the
bowl, making sure not to overfill.
USING YOUR SLICING/SHREDDING DISC
IMPORTANT: Review all
warnings on pages 3-6 before proceeding.
IMPORTANT: Only use LOW when using the Slicing/Shredding Disc.
NOTE: The feed chute lid features a two-part pusher to guide food through the chute. Use the full pusher for larger items such as cucumbers. Twist and pull to remove the smaller pusher and use the narrow chute for smaller items such as carrots.
NOTE: The Slicing/ Shredding Disc is reversible. Use the side labeled “Slicer” for Slicing. Carefully flip the disc over to the side labeled “Shredder” for shredding.
1 Place the motor base on
a clean, dry, level surface such as a counter or tabletop. Press down on the motor base to make sure that the suction cups adhere to the counter or tabletop.
2 Secure the bowl onto the
motor base.
3 Place the spindle inside
the bowl.
4 Use the finger holes to
grasp the disc and place it over the spindle.
5 Place the feed chute lid
on the bowl and turn clockwise until you hear a click, indicating the lid is locked in place.
6 Plug the power cord into
the electrical outlet and press the power button to turn the unit on.
7 Select LOW on the control
panel. The disc will begin spinning.
17 181-877-646-5288 ninjakitchen.com
USING YOUR SLICING/SHREDDING DISC - CONT�
IMPORTANT: Review all
warnings on pages 3-6 before proceeding.
8 Add the food that you want to slice or shred through the
feed chute on the lid. Use the two-part food pusher to help guide the food through the feed chute. The middle piece of the food pusher is removable to use for smaller ingredients.
19 201- 877-646-5288 ninjakitchen.com
9 When finished, stop the appliance by
pressing the power button and wait for the disc to stop turning. Press the button on the feed chute lid located near the handle to unlock and turn the lid counterclockwise. Lift to remove from the food processor bowl. Using the finger holes, carefully lift the Slicing/Shredding Disc out of the bowl and remove the spindle.
10 To release the motor base from the
counter or tabletop, lift the base up from underneath the sides of the unit. The release paddles on both sides will help to disengage the suction feet from the surface.
CARE & MAINTENANCE
TROUBLESHOOTING GUIDE
CLEANING
1 Separate all parts.
2 Wash all containers in warm, soapy water
with a soft cloth.
3 Hand Washing
Wash blade assemblies in warm, soapy water using a dishwashing utensil with a handle or the provided cleaning brush to avoid direct contact with the blades. Exercise care when handling blade assemblies as the blades are sharp. Thoroughly rinse and air-dry all parts.
Dishwasher
All attachments are dishwasher safe. It is recommended that the lids, containers, and blade assemblies be placed on the top rack of the dishwasher ONLY. Ensure the blade assemblies are removed from their containers before placing in the dishwasher. Exercise care when handling blade assemblies.
Motor Base
Turn off the unit and unplug the motor base before cleaning. Wipe motor base with a clean, damp cloth.
Clean the touchscreen with a soft cloth,
such as microfiber, to prevent scratching. To remove residue from the touchscreen, you may use an all-purpose cleaner.
NEVER spray the base or touchscreen with
water or other liquids.
DO NOT use abrasive cloths/pads/brushes
to clean the base or touchscreen, as this can dull or scratch the surface.
STORING
Wrap the power cord around the cord wrap on the back of the motor base. Store the unit upright and store all blade assemblies inside or attached to their respective containers with their lids locked into place.
DO NOT stack items on top of the containers. Store any remaining attachments alongside the unit or in a cabinet where they will not be damaged or create a hazard.
RESETTING THE MOTOR THERMOSTAT
This unit features a unique safety system that prevents damage to the motor and drive system should you inadvertently overload the it. If the unit is overloaded, the motor will be temporarily disabled. Should this occur, follow the reset procedure below.
1 Unplug the unit from the electricaloutlet.
2 Allow the unit to cool for approximately
15 minutes.
3
Remove the container’s lid and blade assembly. Empty the container and ensure no ingredients are jamming the blade assemblies.
IMPORTANT: Ensure that maximum
capacities are not exceeded. This is the most typical cause of appliance overload.
If your unit needs servicing, please call
Customer Service at 1-877-646-5288.
ORDERING REPLACEMENT PARTS
To order additional parts and attachments, visit ninjaaccessories.com or contact Customer Service at 1-877-646-5288.
WARNING: To reduce the risk of shock and unintended operation, turn power o and unplug unit before troubleshooting�
Unit doesn’t turn on�
Make sure unit is plugged in.
Display will read “- --” once connected to power.
Place container on base and rotate it clockwise until it clicks into place. Available programs will illuminate,
indicating the unit is ready for use.
Unit doesn’t turn o�
Remove container from base by rotating it counterclockwise and lifting it. Display should turn off. Unplug the power cord from the outlet.
Food is not evenly chopped�
For best results when chopping, cut pieces down to even sizes and do not overfill the Precision Processor
Doesn’t mix well; ingredients get stuck�
Using the pre-set programs is the easiest way to achieve great results. The pulses and pauses allow the ingredients to settle toward the blade assembly. If ingredients are routinely getting stuck, adding some liquid will usually help.
When filling the cup, start with fresh fruit or veggies, then leafy greens or herbs. Next add liquids or yogurt, then seeds, powders, or nut butters. Finally, add ice or frozen ingredients.
Motor base won’t stick to counter or tabletop�
Make sure surface and suction feet are wiped clean. Suction feet will only stick to smooth surfaces.
Suction feet
bowl.
WILL NOT stick on some surfaces such as wood, tile, and non-polished finishes.
DO NOT attempt to use unit when the motor base is stuck to a surface that is not secure (cutting board,
platter, plates, etc.).
Unit is dicult to remove from counter for storage�
Place your hands underneath both sides of the motor base and gently pull the unit up and towards you.
You get a blinking “- --” Message
Smart Vessel Recognition can detect which container is on the motor base. You may be trying to use a program that is not designed for the container you have installed. The programs will light up, indicating which programs are available for each container.
You cannot create snow from solid ice�
Do not use ice that has been sitting out or has started to melt. Use ice straight from the freezer.
Start with a few pulses and then go to a continuous blending cycle.
21 221- 877-646-5288 ninjakitchen.com
ONE (1) YEAR LIMITED WARRANTY
The 1-Year Limited Warranty applies to purchases made from authorized retailers of SharkNinja Operating LLC. Warranty coverage applies to the original owner and to the original product only and is not transferable.
SharkNinja warrants that the unit shall be free from defects in material and workmanship for a period of 1 year from the date of purchase when it is used under normal household conditions and maintained according to the requirements outlined in this instruction manual, subject to the following conditions and exclusions.
What is covered by my warranty?
1. The original unit and/or non-wearable components deemed defective, in SharkNinja’s sole discretion, will be repaired or replaced for up to 1 year from the original purchase date.
2. In the rare event that a replacement unit is issued, the warranty coverage ends 6 months after the receipt date of the replacement unit or the remainder of the existing warranty, whichever is greater. If the unit is replaced, SharkNinja reserves the right to replace the unit with one of equal or greater value.
What is not covered by my warranty?
Our Customer Service and Product Specialists are available to provide all the warranty service options available to you, including the possibility of upgrading to our VIP Warranty Service Options for select product categories.
1. Normal wear and tear of wearable parts (including all blending vessels, lids, blades, and blender base) that require regular maintenance and/or replacement to ensure the proper functioning of your unit are not covered by this warranty.
2. Any unit that has been tampered with or used for commercial purposes.
3. SharkNinja will cover the cost for the customer to send the unit to us for repair or replacement. A fee of $19.95 for return shipping costs will be charged at the time of return shipment of the repaired or replacement unit.
4. Damage caused by misuse, abuse, or negligent handling, or damage due to mishandling in transit.
5. Consequential and incidental damages.
6. Defects caused by or resulting from damages from shipping or from repairs, service, or alteration to the product or any of its parts that have been performed by a repair person not authorized by SharkNinja.
7. Products purchased, used, or operated outside of North America.
Problems with your unit/How to get service:
If your appliance fails to operate properly while in use under normal household conditions within the warranty period, visit ninjakitchen.com for product care/maintenance self-help. Our Customer Service and Product Specialists are also available at 1-877-646-5288 to assist with product support and warranty service options.
How to initiate a warranty claim:
You can call 1-877-646-5288 to have a Customer Service specialist assist you. Please note, you must call 1-877-646-5288 to initiate a warranty claim. Return and packing instruction information will be provided at that time.
For Customer Service hours, visit ninjakitchen.com.
Replacement parts are available for purchase at ninjaaccessories.com. For more information on what are classified as wearable and non-wearable parts, please visit ninjakitchen.com/warranty.
This warranty gives you specific legal rights, and you may also have other rights that vary from state to state.
Some states do not permit the exclusion or limitation of incidental or consequential damages, so the above may not apply to you.
NOTES
23 241 -877-646-528 8 ninjakitchen.com
SharkNinja Operating LLC US: Needham, MA 02494 CAN: Ville St-Laurent, QC H4S 1A7 1-877-646-5288 ninjakitchen�com
Illustrations may differ from actual product. We are constantly striving to improve our products; therefore the specifications contained herein are subject to change withoutnotice.
NINJA
and TOTAL CRUSHING are
Operating LLC.
INTELLI-SENSE and PRECISION PROCESSOR are trademarks of SharkNinja Operating LLC.
For SharkNinja U.S. Patent information, visit sharkninja.com/USPatents.
registered trademarks of Shar kNinja
© 2018 SharkNinja Operating LLC CT680CO2SS�IB�E�Mv4
PRINTED IN CHINA
@ninjakitchen
Loading...