Ninja CT670UKV Instructions Manual

Download

Page 1

Smart Screen Kitchen System with FreshVac™ Technology

CT670UKV

INSTRUCTIONS

ninjakitchen.eu

Page 2

ninjakitchen.eu

THANK YOU FOR PURCHASING THE

Ninja® Smart Screen Kitchen System with FreshVac™ Technology

CONTENTS

Important Safety Instructions � � � � � � � � � � � � � � � � � � � � � � � � � � � 2

Getting to Know Your Ninja® Smart Screen Kitchen System with FreshVac™ Technology � � � � � � � � � � � � � � � � � � � � � � � � � � � � 6

Before First Use � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 8

ninjakitchen.eu/uk/ register-guarantee/

Scan QR code using mobile device

RECORD THIS INFORMATION

Model Number: ��

Serial Number: ��

Date of Purchase: �� (Keep receipt)

Store of Purchase: ��

THIS BOOK COVERS MODEL NUMBER:

CT670UKV

TECHNICAL SPECIFICATIONS

Voltage: 220-240V, 50-60Hz Power: 1100 Watts

PLEASE READ CAREFULLY AND KEEP FOR FUTURE REFERENCE�

TIP: You can ﬁnd the model and serial

numbers on the QR code label located on the back of the unit by the power cord.

Guarantee: This product is unconditionally guaranteed for one year against all defects of workmanship and materials. This guarantee does not aect your statutory rights. If this product proves unsatisfactory please contact our customer service department on freephone 0800 862 0453 or by e-mail ukservice@euro-pro.com

Getting to Know Your Smart Screen™ � � � � � � � � � � � � � � � � � � � � 9

Total Crushing® FreshVac™ Pitcher . . . . . . . . . . . . . . . . . . . . . . . . 9

Single-Serve FreshVac™ Cup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10

Precision Processor™ Bowl . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Using Your Total Crushing® FreshVac™ Pitcher � � � � � � � � � � � 12

Using Your Single-Serve FreshVac™ Cup � � � � � � � � � � � � � � � � �20

Using Your Precision Processor™ Bowl � � � � � � � � � � � � � � � � � � 24

Care & Maintenance � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 32

Cleaning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32

Storing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32

Resetting the Motor Thermostat . . . . . . . . . . . . . . . . . . . . . . . . . . 32

Troubleshooting Guide � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 33

Ordering Replacement Parts � � � � � � � � � � � � � � � � � � � � � � � � � � � 34

Product Registration � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 34

This appliance complies with the WEEE-Directive 2012/19/EU on the disposal of electrical and electronic equipment (WEEE).

This marking indicates that this product should not be disposed with other household wastes throughout the EU. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material sources. To return your used device, please use the return and collection systems or contact the retailer where this product was purchased. They can take this product for environmental safe recycling.

This appliance complies with the European directives for electromagnetic compatibility (EMC) 2014/30/EU and its revisions, as well as Low Voltage Directive (LVD) 2014/35/EU and its revisions.

Page 3

ninjakitchen.eu

IMPORTANT SAFEGUARDS

HOUSEHOLD USE ONLY • READ ALL INSTRUCTIONS CAREFULLY BEFORE USE

Read all instructions before using your NINJA SMART SCREEN KITCHEN SYSTEM WITH FRESHVAC™ TECHNOLOGY

When using electrical appliances, basic safety precautions should always be followed, including the following:

WARNING

To reduce the risk of ﬁre, electric shock, serious injury, death, or damage when using this appliance, follow these basic safety precautions.

General Precautions 1 Read all instructions prior to using

the appliance and its accessories.

2 Carefully observe and follow all

warnings and instructions. This unit contains electrical connections and moving parts that potentially present risk to the user.

3 This product is provided with

a Stacked Blade Assembly and a Chopping Blade Assembly. ALWAYS exercise care when handling blade assemblies. The blade assemblies are sharp and are NOT locked in place in their containers. The blade assemblies are designed to be removable to facilitate cleaning and replacement if needed. O N LY grasp the blade assemblies by the top of the shaft. Failure to use care when handling the blade assemblies will result in a risk of laceration.

4 A L W A Y S exercise care when

handling the Pro Extractor Blades Assembly. The blades are sharp. ON LY grasp the Pro Extractor Blades Assembly by the outer perimetre of the blade assembly base. Failure to use care when handling the blade assembly will result in a risk of laceration.

5 Take your time and exercise care

during unpacking and appliance setup. This appliance contains sharp, loose blades that can cause injury if mishandled.

6 Take inventory of all contents to

ensure you have all parts needed to properly and safely operate your appliance.

7 Turn the appliance OFF, then

unplug from the outlet when not in use, before assembling or disassembling parts and before cleaning. To unplug, grasp the plug and pull from the outlet. NEVER pull from the power cord.

8 Before use, wash all parts that

may contact food. Follow washing instructions covered in this instructionmanual.

9 To protect against risk of electrical

shock, DO NOT put the appliance in water or other liquid. DO NOT allow the power cord to contact water or other liquid.

10 DO NOT use this appliance

outdoors. It is designed for indoor

household use only.

11 This appliance has a polarized

plug (one prong is wider than the other). To reduce the risk of electric shock, this plug will ﬁt in a polarized outlet only one way. If the plug does not ﬁt fully in the outlet, reverse the plug. If it still does not ﬁt, contact a qualiﬁed electrician. DO NOT modify the plug in any way.

12 DO NOT operate any appliance

with a damaged cord or plug, or after the appliance malfunctions, or is dropped or damaged in any manner. This appliance has no user-serviceable parts. If damaged, contact SharkNinja for servicing.

13 This appliance has important

information on the plug prong. The power cord is not suitable for replacement. If damaged, contact Euro-Pro Europe Limited for servicing in order to avoid a hazard.

14 Extension cords should NOT

be used with this appliance.

15 This appliance is NOT intended

for use by children or by persons with reduced physical, sensory, or mental capabilities, or lack of experience and knowledge. Close supervision is necessary when any appliance is used near children. Children should be supervised to ensure that they do not play with the appliance.

16 Before each use, inspect blade

assemblies for damage. If a blade is bent or damage is suspected, contact Euro-Pro Europe Limited to arrange for replacement.

17 DO NOT attempt to sharpen blades. 18 DO NOT allow the unit or the cord

to hang over the edges of tables or worktops. The cord may become snagged and pull the appliance o the work surface.

19 DO NOT allow any part of the

unit to contact hot surfaces, including stoves and other heating appliances.

20 ALWAYS use the appliance on a

dry and level surface.

21 NEVER place a blade assembly

on the motor base without it ﬁrst being attached to its corresponding container (bowl, pitcher, cup) and lid.

22 Keep hands, hair, and clothing out

of the container.

23 ON LY use attachments and

accessories that are provided with the product or are recommended by SharkNinja. The use of attachments not recommended or sold by SharkNinja may cause ﬁre, electric shock, or injury.

24 During operation and handling of

the appliance, avoid contact with moving parts.

25 DO NOT operate the appliance

with an empty container.

26 DO NOT ﬁll containers past the

MAX FILL or MAX LIQUID lines.

27 DO NOT microwave any containers

or accessories provided with the appliance.

28 DO NOT perform grinding

operations with the SingleServe Cup and Pro Extractor Blades

29 Before operation, ensure all utensils

are removed from containers. Failure to remove utensils can cause containers to shatter and potentially result in personal injury and property damage.

Assembly.

CONTINUED ON PAGE 4

SAVE THESE INSTRUCTIONS

2 3

Page 4

ninjakitchen.eu

IMPORTANT SAFEGUARDS

HOUSEHOLD USE ONLY • READ ALL INSTRUCTIONS BEFORE USE

Read all instructions before using your NINJA

When using electrical appliances, basic safety precautions should always be followed, including the following:

SMART SCREEN KITCHEN SYSTEM WITH FRESHVAC™ TECHNOLOGY

WARNING

To reduce the risk of ﬁre, electric shock, serious injury, death, or damage when using this appliance, follow these basic safety precautions.

GENERAL PRECAUTIONS 31 Keep hands and utensils out of

containers while chopping and blending to reduce the risk of severe personal injury or damage to the blender/food chopper. A scraper may be used O N LY when the blender or processor is not running. When using the processor, always use food pusher to add food. NEVER add food by hand.

32 NEVER operate the appliance

without lids and caps in place. DO NOT attempt to defeat the interlock mechanism. Ensure the container and lid are properly installed before operation.

33 DO NOT expose the containers

and accessories to extreme temperature changes. They may experience damage.

34 NEVER leave the appliance

unattended while in use.

35 DO NOT open lid or pour spout

cap while blender is operating.

36 DO NOT blend hot liquids. Doing

so may result in pressure buildup and steam exposure that can pose a risk of the user being burned.

37 If you ﬁnd unmixed ingredients

sticking to the sides of the pitcher, stop the appliance, remove the lid, and use a scraper to dislodge ingredients. NEVER insert your hands into the pitcher, as you may contact one of the blades and experience a laceration.

38 DO NOT attempt to remove the

container and lids from the motor base while the blade assembly is still spinning. Allow the appliance to come to a complete stop before removing lid and container.

39 Upon completion of blending

or processing, ensure the blade assembly is removed BEFORE emptying container’s contents. Remove the blade assembly by carefully grasping the top of the shaft and lifting it from the container. Failure to remove the blade assembly before emptying the container results in a risk of laceration.

40 Remove the Pro Extractor Blades

Assembly from the Single-Serve Cup upon completion of blending. DO NOT store ingredients before or after blending them in the cup with the blade assembly attached. Some foods may contain active ingredients or release gases that will expand if left in a sealed container, resulting in excessive pressure buildup that can pose a risk of injury. For ingredient storage in the cup, use only Spout Lid to cover.

41 If the appliance overheats, a

thermal switch will activate and temporarily disable the motor. To reset, unplug the appliance and allow it to cool for approximately 30 minutes before using again.

42 The maximum wattage rating for

this appliance is based on the conﬁguration of the Pro Extractor Blades Assembly and Single-Serve Cup. Other conﬁgurations may draw less power or current.

43 DO NOT process dry ingredients

without adding liquid to the SingleServe Cup. The Single-Serve Cup is not intended for dry blending.

44 DO NOT submerge the motor

base or touchscreen in water or other liquids.

DO NOT spray the motor base or

touchscreen with any liquids. Turn o and unplug the motor base before cleaning.

45 DO NOT incinerate this appliance

even if it i severely damaged. The batteries can explode in a ﬁre.

46 Use certiﬁed AA size battery, follow

instruction to insert batteries with correct polarity, Please remove batteries if appliance is to be stored unused for a long time.

47 DO NOT charge non-rechargeable

batteries. Do not mix dierent type batteries, or new and used batteries. Supply terminals are not to be short-circuited. Exhausted batteries need to be removed and safely disposed of.

SAVE THESE INSTRUCTIONS

4 5

Page 5

GETTING TO KNOW YOUR NINJA® PARTS

WELCOME!

Congratulations on your purchase. Use this instruction manual to learn about the great features of your Ninja Smart Screen Kitchen System with FreshVac™ Technology. From assembly to use to maintenance, you will ﬁnd it all in here.

There are a variety of accessories that are compatible with this blenderseries.

NOTE: The top ﬂap of your box shows the select accessories that are included with your model.

To purchase more accessories and ﬁnd great recipes, visit ninjakitchen.eu

*1.8L max liquid capacity.

MAIN UNIT

A Cup FreshVac™ Tab

B FreshVac™ Pump

C Flip n’ Seal Cap

D 600ml Single-Serve FreshVac™ Cup

E Pro Extractor Blade Assembly

F Motor Base with Touchscreen

G FreshVac Lid

H Pitcher Release Seal

I Pitcher Lid

J Stacked Blade Assembly

K 2.1L Total Crushing® FreshVac™

Pitcher*

L Two-Part Pusher for Feed Chute Lid

M Feed Chute Lid

N Reversible Slicing/Shredding Disc

O Disc Spindle

P Chopping Blade Assembly

Q Dough Blade Assembly

R Precision Processor™ Bowl

Twist o Battery Assembly

Pump Release

F K R

ninjakitchen.eu

Page 6

ninjakitchen.eu

BEFORE FIRST USE

GETTING TO KNOW YOUR SMART SCREEN™

IMPORTANT: Review all warnings

on pages 2-5 before proceeding.

DID YOU KNOW?

• You can take your drinks on the go using the Spout Lids.

• All containers, blade assemblies, and lids are BPA free and dishwasher safe.

INSTALLING THE BATTERIES

1 Unscrew the FreshVac™ Pump’s

power button cap and remove the spring-loaded battery cover.

2 Install 6 AA alkaline batteries

(included), ensuring the +/symbols on the batteries match the markings on the battery cover and battery housing.

3 Replace the battery cover, making

WHAT IS AUTO-IQ® TECHNOLOGY?

Intelligent pre-set programs combine unique blending and pausing patterns that do the work for you. Once a pre-set program is selected, it will start immediately. Press the selected program again to pause it.

AUTO-IQ PROGRAMS FOR THE PITCHER

sure it is fully seated and clicked

NOTE: The Chopping Blade Assembly and Stacked Blade Assembly are NOT locked in place in their containers. Handle the Chopping Blade Assembly and Stacked Blade Assembly by grasping the top of their shafts.

NOTE: Handle the Pro Extractor Blades® Assembly by grasping around the perimeter of the blade assembly base.

NOTE: All attachments are dishwasher safe. It is recommended that the lids,

containers, and blade assemblies be placed on the top rack of the dishwasher. Ensure blade assemblies and lids are removed from their containers before placing in the dishwasher. Exercise care when handling blade assemblies. Overﬂow reservoir is hand wash only.

1 Remove all packaging materials

from the appliance. Exercise care when unpacking blade assemblies. All blade assemblies are sharp.

2 Wash containers, lids, and blade

assemblies in warm, soapy, water using a dishwashing utensil with a handle to avoid direct contact with the blades. Exercise care when handling blade assemblies, as the blades are sharp.

3 Thoroughly rinse and air-dry all parts.

4 Wipe touchscreen with a soft,

in place.

4 Screw on the pump’s power

button cap.

NOTE: If the battery cover and power button cap are not properly installed or tightly in place, the pump will not function.

USING AN OPTIONAL AC ADAPTER

If you prefer to power your FreshVac™ pump using an AC Adapter, you may purchase one on ninjakitchen.eu.

1 Insert the barrel connector (small

round end of the AC Adapter power cord) into the AC Adapter port on the pump.

2 Insert the plug of the AC Adapter

into an electrical socket.

NOTE: Use only an optional AC Adapter manufactured by SharkNinja. Other after-market adapters are not compatible with the FreshVac™ pump.

SMOOTHIE

ICE CREAM

FROZEN DRINK

PUREE

Press the Power symbol to turn your unit on or o.

AUTO-IQ SETTINGS:

SMOOTHIE

Make super-smooth, sippable drinks and shakes from fresh or frozen fruit, milk, liquids, and ice

ICE CREAM Create delicious and scoop-able frozen desserts like ice cream or sorbet.

PUREE Create anything from silky smooth sauces to the perfect hummus.

FROZEN DRINK Turn ice, juices, and fruit into expertly blended frozen drinks.

MANUAL SETTINGS:

LOW and HIGH

Use HIGH or LOW to blend ingredients to your preferred consistency. Once selected, these functions will run continuously until turned o. They will not run in conjunction with pre-set programs.

PULSE Use PULSE by pressing and releasing the button to pulse ingredients to your desired texture and consistency. This function operates only when the button is pressed. Use short presses for short pulses, and longer presses for longer pulses.

LOW

HIGH

PULSE

damp cloth. Allow it to dry completely before using.

8 9

Page 7

ninjakitchen.eu

AUTO-IQ PROGRAMS FOR THE SINGLE SERVE FRESHVAC™ CUP

AUTO-IQ® PROGRAMS FOR THE PRECISION PROCESSOR™ BOWL

SMOOTHIE

EXTRACT

FROZEN DRINK

LOW

HIGH

PULSE

Press the Power symbol to turn your unit on or o. Press the Power symbol to turn your unit on or o.

AUTO-IQ SETTINGS:

SMOOTHIE

Make super-smooth, sippable drinks and shakes from fresh or frozen fruit, milk, liquids, and ice

EXTRACT

Ideal for tough, leafy, or ﬁbrous whole fruits and vegetables, including their skins, seeds, andstems.

FROZEN DRINK Turn ice, juices and fruit into expertly blended frozen drinks.

MANUAL SETTINGS:

LOW and HIGH

Use HIGH or LOW to blend ingredients to your preferred consistency. Once selected, these functions will run continuously until turned o. They will not run in conjunction with pre-set programs.

AUTO-IQ SETTINGS:

PUREE

Create anything from silky smooth sauces to the perfect hummus.

CHOP Timed pulses and pauses to give you consistent chopping results.

MANUAL SETTINGS:

LOW and HIGH

Use HIGH or LOW to blend ingredients to your preferred consistency. Once selected, these functions will run continuously until turned o. They will not run in conjunction with pre-set programs.

LOW

HIGH

PULSECHOPPUREE

10 11

Page 8

ninjakitchen.eu

USING YOUR TOTAL

IMPORTANT: Review all warnings on pages 2-5 before proceeding.

IMPORTANT:

As a safety feature, if the pitcher and lid are not properly installed, the timer will display “

” and the motor will be disabled. If this happens, repeat step 5 on page 14. When the pitcher and lid are properly installed, the program buttons will illuminate steadily, indicating the appliance is ready for use.

CRUSHING® FRESHVAC™ PITCHER

Vacuum Blending recommended

for smoothies, soups, dips, frappes and protein drinks for brighter ﬂavours, brighter colours, and improved textures.

Non Vacuum Blending recommended for frozen drinks and ice cream/ sorbets to ensure no issues with frozen ingredients and best performance, less melt out.

Place the unplugged motor base on a clean, dry, and level surface such as a worktop or table. Press downward on the motor base to adhere the suction cups to the work surface. Plug the motor base into a socket.

12 13

2 Place the pitcher on a level

surface and place the stacked blade assembly on the spindle in the pitcher.

3 Add ingredients, making sure to not

exceed the Max Fill line marked on the side of the pitcher.

4 Place the lid on the pitcher, aligning

the triangle symbol located on the lid with the triangle symbol located on the pitcher’s handle. Press down on the handle until it clicks into place. The triangle symbols MUST be aligned for the lid to lock onto place and the unit to operate.

Page 9

ninjakitchen.eu

VACUUM BLENDING WITH YOUR

IMPORTANT: Review all warnings on pages 2-5 before proceeding.

TOTAL CRUSHING® FRESHVAC™ PITCHER

TIPS:

• If the Stacked Blade Assembly is not fully seated, you will not be able to install and lock the lid.

• To learn more about the programs that work with your Total Crushing Pitcher, refer to page 9.

Place the pitcher on a level surface

and place the FreshVac™ Pump on top of the green release seal on the lid. The pump DOES NOT lock into place on the lid.

14 15

To vacuum seal the pitcher, hold

the pump in place over the release seal. Press the power button on top of the pump once to begin vacuum sealing. The pump will make a motorised noise and the light on the pod will illuminate in white while vacuum sealing is in progress.

When vacuum sealing is complete,

the pump will shut o automatically and the green light on the pump will illuminate.

8 To release the pump from the

pitcher, press the eject button located on the bottom front of the pump.

To blend ingredients, follow

instructions on page 16. When blending is complete, pressure must be released from the pitcher through the release seal before opening the lid. See step 10 for more information.

Page 10

ninjakitchen.eu

VACUUM BLENDING WITH YOUR

IMPORTANT: Review all warnings on pages 2-5 before proceeding.

IMPORTANT:

As a safety feature, if the pitcher and lid are not properly installed, the timer will display “ ” and the motor will be disabled. If this happens, repeat step 5 on page 35. When the pitcher and lid are properly installed, the program buttons will illuminate steadily, indicating the appliance is ready for use.

TOTAL CRUSHING® FRESHVAC™ PITCHER - CONT�

11 When the unit is connected

to power and the container is correctly locked onto the motor base, press the Power symbol to turn unit on. The available program buttons will illuminate and the unit will be ready for use.

Lower the Total Crushing pitcher onto the motor base. Align the pitcher so the handle is to the right, in a diamond position. Then rotate the pitcher clockwise until it clicks into place.

NOTE: The unit can detect which container is on the motor base. Only the functions available for a particular container will illuminate on the touchscreen.

16 17

12 If using a pre-set program, ﬁrst

select the program that best suits your recipe. The pre-set feature will automatically stop the appliance at the end of the program. To pause the unit at any time, press the currently active button a second time. Reference page 9 for program descriptions.

13 If not using a pre-set program

and ingredients have reached your desired consistency, stop the appliance by releasing the manual speed button, and wait for the appliance to come to a complete stop.

14 When blending is complete, rotate

pitcher anti-clockwise to remove from motor base and place on a level surface. The vacuum seal must be released before opening the lid. (The vacuum-sealed pitcher may be stored in the refrigerator for later use.)

Page 11

ninjakitchen.eu

VACUUM BLENDING WITH YOUR

IMPORTANT: Review all warnings on pages 2-5 before proceeding.

TOTAL CRUSHING® FRESHVAC PITCHER™ - CONT�

To release the vacuum seal, pull out

the Freshvac™ tab on the liduntil the valve pops out. Air will enter the pitcher, making it safe to open.

18 19

16 Pour out blended ingredients

through the spout in the lid. Or to remove the lid, press the RELEASE button, then lift o lid with handle.

Once blended, thinner mixtures can be poured through the spout. Ensure the lid is locked in place, then open the pour spout cap.

17 For thicker mixtures that cannot be

emptied through the pour spout, remove the lid and Stacked Blade Assembly before pouring. To remove the lid, press the RELEASE button and lift the handle. To remove the blade assembly, carefully grasp it by the top of the shaft. The pitcher can then be emptied.

Unplug the unit when ﬁnished. To

release the motor base, place your hands underneath both sides of the motor base and gently pull the unit up and toward you. Refer to page 34 for storing instructions.

Page 12

ninjakitchen.eu

VACUUM BLENDING

IMPORTANT: Review all warnings on pages 2-5 before proceeding.

WITH YOUR SINGLE-SERVE FRESHVAC™ CUP

SINGLE-SERVE VACUUM CUP WITH VACUUM SEAL CAP�

Vacuum Blending recommended

for extractions, smoothies, soups, dips, and dressings for brighter ﬂavours, vibrant colours, and improved textures.

Non Vacuum Blending recommended whipped desserts that beneﬁt from adding air and frozen drinks with highly frozen ingredients for best performance, thicker results.

Place the Pro Extractor Blade®

Assembly on the top of the cup and turn clockwise to seal.

Turn cup upside down so

the Flip & Seal Lid is on top.

6 When vacuum sealing is complete,

the pump will shut o automatically and the green light on the pump will illuminate.

7 To release the pump from the cup,

press the eject button located at the bottom front of the pump.

Add ingredients to the FreshVac™ Cup.

DO NOT add ingredients past the MAX LIQUID line on the cup.

NOTE: Overﬁlling the cup may cause harm to the FreshVac Pump when in use.

20 21

4 To open the Flip & Seal Lid,

press the tab and lift. Place the FreshVac

™ Pump on top of the

release seal.

NOTE: Ensure FreshVac Tab is dry before using FreshVac Pump.

To vacuum seal the cup, hold the

pump in place over the release seal. Press the power button on top of the pump once to begin vacuum sealing. The pump will make a motorised noise and the light on the pump will illuminate in white while vacuum sealing is in progress.

8 Close the Flip & Seal Lid. Press

it closed until it clicks into place.

9 To blend ingredients, follow

instructions on page 22.

When blending is complete,

pressure must be released from the cup through the release seal before opening the lid. See step 5 on page 23.

Page 13

ninjakitchen.eu

USING YOUR

IMPORTANT: Review all warnings on pages 2-5 before proceeding.

SINGLE-SERVE FRESHVAC™ CUP

TIPS:

• To learn more about the programs that work with your Single-Serve Cup, refer to page 10.

NOTE: Pre-set programs have pauses and changes in speed throughout the cycle.

NOTE: The unit can detect which container is on the motor base. Only the functions available for a particular container will illuminate on the touchscreen.

SINGLE-SERVE FRESHVAC™ CUP WITH FLIP & SEAL LID�

Turn the Single-Serve Cup upside

down and install on the motor base. Align the tabs on the cup with the slots on the base, then twist until it clicks into place. Press the Power symbol to turn unit on. The available program buttons will illuminate and the unit will be ready for use.

When blending is complete, rotate

cup anti-clockwise to remove from motor base and place cup on a level surface. Pressure must be released before opening the cup. (The vacuum-sealed cup may be stored in the refrigerator for later use. See Storing Blended Ingredients in Your Vacuum-Sealed Cup section.)

Turn cup over so Pro Extractor Blade®

Assembly is on top. Rotate blade assembly anti-clockwise to remove. To take your blended contents on the go, place travel lid on cup and rotate clockwise to seal.

1 Place the unplugged motor base

on a clean, dry, and level surface such as a worktop or table. Press downward on the motor base to adhere the suction cups to the work surface. Plug the motor base into a socket.

22 23

3 If using a pre-set program, ﬁrst

select the program that best suits your recipe. The pre-set feature will automatically stop the unit at the end of the program. To pause the unit at any time, press the currently active program a second time. Reference page 10 for program descriptions.

To release the vacuum seal, ﬁrst

open the Flip & Seal Lid. Press the tab on the cap and lift to open. Open the release seal by pulling it by the tab. Air will enter the cup, making it safe to open.

NOTE: DO NOT pull out the FreshVac Tab.

Unplug the unit when ﬁnished. To

release the motor base, place your hands underneath both sides of the motor base and gently pull the unit up and towards you. Refer to page 34 for storing instructions.

Page 14

ninjakitchen.eu

USING YOUR PRECISION

IMPORTANT: Review all warnings on pages 2-5 before proceeding.

PROCESSOR™ BOWL

TIPS:

• If the blade assembly is not fully seated, you will not be able to install and lock the lid into position.

• To learn more about the programs that work with your Precision Processor Bowl, refer to page 11.

NOTE: Pre-set programs have pauses and changes in speed throughout the cycle.

NOTE: DO NOT add ingredients before installing the blade assembly.

Place the unplugged motor base

on a clean, dry, and level surface such as a worktop or table. Press downward on the motor base to adhere the suction cups to the work surface. Plug the motor base into a socket.

24 25

Lower the Precision Processor bowl

onto the motor base. Align the bowl so the handle is to the right, in a diamond position.

3 Rotate the bowl clockwise until it

clicks into place.

4 Handling with care, grasp the

Chopping Blade Assembly by the top of the shaft and place it onto the spindle inside the bowl. Note that the Chopping Blade Assembly will ﬁt loosely on the spindle.

Page 15

ninjakitchen.eu

USING YOUR PRECISION

IMPORTANT: Review all warnings on pages 2-5 before proceeding.

PROCESSOR™ BOWL - CONT�

NOTE: Please follow the same

instructions to install the Dough Blade Assembly.

NOTE: The unit can detect which container is on the motor base. Only the functions available for a particular container will illuminate on the touchscreen.

6 Place the feed chute lid on the

bowl and turn clockwise until you hear a click, indicating the lid is locked in place.

8 To remove the bowl from the

motor base, turn the bowl anti-clockwise and then lift it.

Handling with care, grasp the

Chopping Blade Assembly by the top of the shaft and lift out the bowl.

Add ingredients to the bowl

making sure not to ﬁll past the Max Fill line.

26 27

If using a pre-set program, ﬁrst

Remove the lid by pressing the

release button on the front tab, twisting the lid anti-clockwise, and lifting up. Always remove the Chopping Blade Assembly before emptying any of the ingredients in the bowl.

11 Unplug the unit when ﬁnished. To

release the motor base, place your hands underneath both sides of the motor base and gently pull the unit up and towards you.

Page 16

ninjakitchen.eu

USING YOUR

IMPORTANT: Review all warnings on pages 2-5 before proceeding.

IMPORTANT: Only use LOW when using the Slicing/Shredding Disc.

SLICING/SHREDDING DISC

NOTE: The feed chute lid features

a two-part pusher to guide food through the chute. Use the full pusher for larger items such as cucumbers. Twist and pull to remove the smaller pusher and use the narrow chute for smaller items such as carrots.

NOTE: The Slicing/Shredding Disc is reversible. Use the side labelled “Slicer” for Slicing. Carefully ﬂip the disc over to the side labelled “Shredder” for shredding.

Lower the Precision Processor bowl

onto the motor base. Align the bowl so the handle is to the right, in a diamond position.

Place the spindle inside the bowl. 6 Place the feed chute lid on the

bowl and turn clockwise until you hear a click, indicating the lid is locked in place.

Place the unplugged motor base

on a clean, dry, and level surface such as a worktop or table. Press downward on the motor base to adhere the suction cups to the work surface. Plug the motor base into a socket.

28 29

3 Secure the bowl onto the motor

base. Rotate Precision Processor bowl clockwise until it clicks into place.

™

5 Use the ﬁnger holes to grasp the

disc and place it over the spindle.

Press the power button and select

LOW on the control panel. The disc will being spinning.

Page 17

ninjakitchen.eu

USING YOUR

IMPORTANT: Review all warnings on pages 2-5 before proceeding.

SLICING/SHREDDING DISC - CONT�

To remove the bowl from the

motor base, turn the bowl anti-clockwise and then lift it.

8 Add the food that you want to slice

or shred through the feed chute on the lid. Use the two-part food pusher to help guide the food through the feed chute. The middle piece of the food pusher is removable to use for smaller ingredients.

30 31

When ﬁnished, stop the appliance

by pressing the power button and wait for the disc to stop turning. Press the button on the feed chute lid located near the handle to unlock and turn the lid anti-clockwise. Lift to remove from the Food Processor bowl.

Using the ﬁnger holes, carefully lift

the Slicing/Shredding Disc out of the bowl.

Grasp the spindle by the top of the

shaft and lift it out of the bowl.

Unplug the unit when ﬁnished. To

release the motor base, place your hands underneath both sides of the motor base and gently pull the unit up and towards you.

Page 18

ninjakitchen.eu

TROUBLESHOOTING GUIDECARE & MAINTENANCE

CLEANING

1 Separate all parts.

2 Wash all containers in warm, soapy

water with a soft cloth.

3 Hand-Washing

Wash blade assemblies in warm, soapy water using a dishwashing utensil with a handle to avoid direct contact with the blades. Exercise care when handling blade assemblies as the blades are sharp. Thoroughly rinse and air-dry all parts.

Dishwasher

All attachments are dishwasher safe. It is recommended that the lids, containers, and blade assemblies be placed on the top rack of the dishwasher ON LY. Ensure the blade assemblies are removed from their containers before placing in the dishwasher. Exercise care when handling blade assemblies.

Motor Base

Turn o the unit and unplug the motor base before cleaning. Wipe motor base with a clean, damp cloth.

Clean the touchscreen with a soft

cloth, such as microﬁbre, to prevent scratching. To remove residue from the touchscreen, you may use an all-purpose cleaner.

NEVER spray the base or

touchscreen with water or other liquids.

DO NOT use abrasive cloths/

pads/brushes to clean the base or touchscreen, as this can dull or scratch the surface.

STORING

Wrap the power cord around the cord wrap on the back of the motor base. Store the unit upright and store all blade assemblies inside or attached to their respective containers with their lids locked into place.

DO NOT store blended or unblended ingredients in the Single-Serve Cup with the Pro Extractor Blades® Assembly attached.

DO NOT stack items on top of the containers. Store any remaining attachments alongside the unit or in a cabinet where they will not be damaged or create a hazard.

RESETTING THE MOTOR THERMOSTAT

This unit features a unique safety system that prevents damage to the motor and drive system should you inadvertently overload it. If the unit is overloaded, the motor will be temporarily disabled. Should this occur, follow the reset procedure below.

1 Unplug the unit from the socket.

2 Allow the unit to cool for

approximately 15 minutes.

Remove the container’s lid and blade assembly. Empty the container and ensure no ingredients are jamming the blade assemblies.

IMPORTANT: Ensure that

maximum capacities are not exceeded. This is the most typical cause of appliance overload.

If your unit needs servicing,

please call Customer Service at on 0800 862 0453.

WARNING: To reduce the risk of shock and unintended operation, turn power off and unplug unit before troubleshooting�

Unit doesn’t turn on�

• Make sure unit is plugged in.

• Display will read “ ” once connected to power.

• Place container on base and rotate it clockwise until it clicks into place. Available programs will illuminate, indicating the unit is ready for use.

Unit doesn’t turn off�

• Remove container from base by rotating it anti-clockwise and lifting it. Display should turn o. Unplug the power cord from the socket.

Food is not evenly chopped�

• For best results when chopping, cut pieces down to even sizes and do not overﬁll the Precision Processor

Doesn’t mix well; ingredients get stuck�

• Using the pre-set programs is the easiest way to achieve great results. The pulses and pauses allow the ingredients to settle toward the blade assembly. If ingredients are routinely getting stuck, adding some liquid will usually help.

• When ﬁlling the cup, start with fresh fruit or vegetables, then leafy greens or herbs. Next add liquids or yogurt, then seeds, powders, or nut butters. Finally, add ice or frozen ingredients.

Motor base won’t stick to worktop or table�

• Make sure surface and suction feet are wiped clean. Suction feet will only stick to smooth surfaces.

• Suction feet WILL NOT stick on some surfaces such as wood, tile, and non-polished ﬁnishes.

• DO NOT attempt to use unit when the motor base is stuck to a surface that is not secure (cutting board, platter, plates, etc.).

Unit is difﬁcult to remove from worktop for storage�

• Place your hands underneath both sides of the motor base and gently pull the unit up and towards you.

You get a blinking

• The unit can detect which container is attached to the motor base. You may be trying to use a program that is not designed for the container you have installed. The programs will light up, indicating which programs are available for each container.

It’s taking longer than usual to vacuum seal my container�

• It will typically take 10-20 seconds to seal your cup and 30-60 seconds to seal your pitcher.

• Replace your AA batteries.

Rubber seal was removed from container�

• If further assistance is needed, call customer service on 0800 862 0453.

Can’t remove Pro Extractor Blades Assembly from Cup or Lid from Pitcher�

• Container will be vacuum sealed shut after using the FreshVac pump.

• Release the vacuum seal by gently pulling up on the rubber seal tab before opening.

“

™

bowl.

”

Message

32 33

Page 19

ninjakitchen.eu

TROUBLESHOOTING GUIDE - Cont�

FreshVac™ Pump does not lock onto container�

• Pump will not lock onto pitcher lid or cup. Once pump is activated, the pump will seal to the lid and become secure.

FreshVac™ Pump is stuck on my container�

• To release Fre shVac™ Pump from the container, press down on the pump release button (upwards arrow) and lift up.

What do the lights on the FreshVac™ pump mean?

• White LED indicates that the Fre shVac™ pump has been activated, vacuum sealing is in progress.

• Green LED indicates that the vacuum seal is complete. Pump will automatically shut o when complete.

REPLACEMENT PARTS

To order additional parts and accessories, visit ninjakitchen.eu or contact Customer Service on 0800 862 0453.

NOTES

PRODUCT REGISTRATION

Please visit registeryourninja.com or call 0800 862 0453 to register your new Ninja® product within 28 days of purchase. You will be asked to provide the store name, date of purchase, and model number along with your name and address.

The registration will enable us to contact you in the unlikely event of a product safety notiﬁcation. By registering, you acknowledge you have read and understood the instructions for use and warnings set forth in the accompanying instructions.

34 35

Page 20

ninjakitchen.eu

NOTESNOTES

36 37

Page 21

VISIT US ONLINE AT:

ninjakitchen.eu

Or follow us on any of our social media pages:

@ninjakitcheneu

Euro-Pro Europe Limited Unit 15 Mariner Court Calder Business Park Wakeﬁeld, West Yorkshire, UK 0800 862 0453 ninjakitchen�eu

Illustrations may dier from actual product. We are constantly striving to improve our products; therefore the speciﬁcations contained herein are subject to change withoutnotice.

AUTO-IQ, NINJA , PRO E XTRACTOR B LADES, of SharkNinja Operating LLC.

FR ESH VAC is

a trademark of S harkNinja Operating LLC.

and TOTAL CRUSHING are

registered trademarks

PRINTED IN CHINA