Pacesetter™
17HD/20HD/20SD/20TS
Floor Machines
FACT SHEET
TYPICAL APPLICATIONS INCLUDE
• Supermarkets
• Schools and Universities
• Hospitals
• Office Buildings
• Hotels / Motels
• Heavy Manufacturing Plants
OPTIONAL ACCESSORIES INCLUDE
• A variety of brushes
• Level-set pad holder
• Splash guard
• Handle-mount solution tank
• Additional weight kit available
Whether stripping, scrubbing, screening, or bonnet cleaning, the Advance
Pacesetter™ line of floor machines has a model to fit your needs and
applications. Each of the four Pacesetter models is built with an all cast
metal, chrome plated base. The heavy-duty construction and durability of
the Pacesetter sets it above the competition.
All Pacesetter models have an ergonomic molded handle that protects the
user’s hands during operation along walls and around corners. A red safetylock switch allows the operator to easily control when the machine goes
into operation. An easy-to-use compression style lever changes the height
adjustment of the handle for all operators. Pad holders are standard on the
Pacesetter, and the yellow, super-flex cord offers ease in cord handling and
reduced tangling. A clear plastic hospital plug allows the operator to verify
the electrical integrity of the connection at each use of the machine.
At 1.5 hp, 175 rpm, the Pacesetter™ HD is available in 17 and 20 inch
sizes. A triple-planetary gear design lasts longer than other gear drives
because they do not develop a wear pattern. A sealed gear box requires no
maintenance.
The Pacesetter™ 20SD is a super duty 20 inch floor machine. For extreme
duty, the 1.75 hp, 175 rpm machine also has the triple-planetary gear
design for longer wear.
The Pacesetter™ 20TS is a two-speed floor machine with a 1.5 hp and a
DC rectified motor. The two-speed machine runs at 180 and 320 rpm.
Molded, ergonomic handle
includes comfortable trigger
levers and safety lock-out switch.
Easy to use handle height
adjuster.
Advance
Pacesetter™ 17HD/20HD/20SD/20TS
Floor Machines
Safety activation
switch on all models
Easy to use
compression
adjuster for
handle height
Convenient cord
wrap holder
Heavy gauge
Base is cast metal
and chrome plated
for easy cleanup
17 in (43 cm) and 20 in (51 cm) pad or brush sizes
metal construction
throughout base
Large non-marking
rear wheels make
transporting easy
Defining
Cleaning
Innovation...
• Our products are
designed using
innovative technology
that increases
productivity and drives
down the cost to clean.
• You can get
expert service and
maintenance for your
Advance machines
from factory-trained
personnel around
the world. Fast parts
delivery, too.
• Maintain peak
performance with
Nilfisk Parts.
The 50 foot cord is nonmarking safety yellow colored.
Technical Specifications
Model Pacesetter™ 17HD Pacesetter™ 20HD Pacesetter™ 20SD Pacesetter™ 20TS
Pad / Brush Size 17 in (43.2 cm) 20 in (50.8 cm) 20 in (50.8 cm) 20 in (50.8 cm)
Pad Drive System
Motor 1.5 hp AC 1.5 hp AC 1.75 hp AC 1.5 hp DC
Horsepower Rectified
Frame Size 66 66 66 66
Motor Amps 15 A 15 A 15 A 15 A
Capacitors
Motor Voltage 120 V 120 V 120 V 120 V
Revolutions 175 rpm 175 rpm 175 rpm 180/320 rpm
Per Minute
Transmission Triple planetary Triple planetary Triple planetary Triple planetary
gears – all metal gears – all metal gears – all metal severe duty
gears box
Clutch Plate NP 92 (industry NP 92 (industry NP 92 (industry NP 92 (industry
standard) standard) standard) standard)
Body All steel with chrome plated bell housing and handle shaft with compression style handle height adjustment.
Construction
Machine Weight 100 lb (45 kg) 102 lb (46 kg) 102 lb (46 kg) 87 lb (40 kg)
Power Cord
Length 50 ft/ 15.25 m – ALL MODELS
Type Safety Yellow Super-flex with hospital grade plug – ALL MODELS
Operator Handle Comfortable and solid handle with safety interlock activation preventing accidental start-up – ALL MODELS
Noise Level 65 dB A 65 dB A 65 dB A 70 dB A
Approvals ETL, CSA ETL, CSA ETL, CSA ETL, CSA
Part Number 01330A 01410A 01460A 01440A
Dual, start and run Dual, start and run Dual, start and run N/A
Includes rubber wheels for transportation. – ALL MODELS
Specifications are subject to change without notice.
9435 Winnetka Avenue North
Brooklyn Park, MN 55445
www.advance-us.com
Phone: 800-850-5559
Fax: 800-989-6566
240 Superior Boulevard
Mississauga, Ontario, Canada L5T 2L2
www.nilfisk-advance.ca
Phone: 905-564-1149 or 800-668-8400
Fax: 905-564-1030 or 800-263-5111
©2015, Nilfisk, Inc.,
Printed in U.S.A., Form L1826A 8-15
recyclable