11 Main technical Data ................................................................................... 18
12 Declaration of Conformity ......................................................................... 19
C
L
HR
SL
SK
V
R
Z
3Original Instructions
EN
T
SHU
U
H
1 Introduction
1.1 Symbols used to mark instruction
NO
SV
FI
FR
NL
I
All pictograms attached to the high pressure washer and its components are shown and explained in this manual.
Safety instructions marked with this symbol must be observed to prevent personal injury or
serious damage to property.
Caution where there is a risk of damaging the machine or its individual components.
This symbol indicates tips and instructions to simplify work and to ensure a safe operation of
the high pressure washer.
2 Safety precautions and working techniques
Before starting up your machine for the fi rst time, this instruction manual must be read through
carefully. Save the instructions for later use.
WARNING!
• Inhalation of aerosols can be hazardous to health.
L
Where applicable use a device in order to avoid or re-
R
C
HR
SL
SK
V
duce aerosols production, e.g., a shield covering the
nozzle. For protection against aerosols use a respiratory mask of class FFP 2 or higher.
• The high water pressure generated by the machine
and the power connection are particular sources of
danger.
L
• Machines shall not be used by children or untrained
personnel. Children should be supervised to ensure
that they do not play with the machine.
• Do not use the machine within range of persons unless they wear protective clothing.
• Before starting up your machine please check it carefully for any defects. If you fi nd any, do not start up
your machine, contact your Nilfi sk distributor. The insulation of the electric cable should be faultless and
without any cracks. If the electric cable is damaged,
an authorized Nilfi sk di stributor should replace it.
• Always unplug the power plug before cleaning or
R
Z
4
maintenance and when replacing parts or converting
the machine to another function.
Original Instructions
T
SHU
U
H
• Observe the national safety regulations issued, for
example, by the employers liability insurance association, social security institutions, occupational safety
and health authorities or other organizations.
EN
NO
Accessories and spare parts
• To ensure the machine safety only use original spare
parts from Nilfi sk or approved by Nilfi sk.
• High pressure hoses, fi ttings and couplings are important for the safety of the machine. Only use hoses, fi ttings and couplings recommended by Nilfi sk.
Physical, sensory or mental conditions
• This machine is not intended for use by persons
(including children) with reduced physical, sensory or mental capabilities or lack of experience and
knowledge. If the machine is used by people with reduced physical, sensory or mental capabilities or lack
of experience and knowledge they shall have been
given supervision or instruction concerning use of the
machine in a safe way and understand the hazards involved.
SV
FI
FR
NL
I
L
R
Applications
This machine has been developed for domestic use
such as:
Any other use is considered as improper use. Nilfi sk
accepts no liability for any damage resulting from such
use. The risk for such use is borne solely by the user.
Proper use also includes proper operation, servicing
and repairs as specifi ed in this instruction.
Clothing and equipment
Always take action to protect yourself when operating
the machine.
• Wear shoes with non-slip soles.
C
L
HR
SL
SK
V
R
• Wear goggles, ear protection and protective clothes
Z
5Original Instructions
EN
T
SHU
U
H
NO
during operation.
Transporting the high pressure washer
• When transporting the machine in or on a vehicle, it
must be secured, e.g. with straps, so that it cannot slip
SV
FI
FR
NL
I
or tip over.
• Nilfi sk recommends that the machine is positioned
horizontally on the backside, when transported in or
on a vehicle.
Detergents
• This machine has been designed for use with cleaning agents supplied or recommended by Nilfi sk. The
use of other cleaning agents or chemicals may adversely affect the function of the machine.
Before starting the work
Inspecting the machine
• Do not use the machine if a supply cord or important
L
parts of the machine are damaged, e.g., safety device, high pressure hose, and spray handle and spray
R
attachments.
C
HR
SL
SK
V
R
• The trigger of the spray handle must move easily and
automatically return to its starting position when released.
• Always keep high pressure hose and spray attach-
L
ment in good condition (clean, moving easily) and correctly assembled.
Electrical connection
WARNING!
Minimize the risk for electrical shock:
• Voltage and frequency of the machine (see rating
plate) must match the voltage of and frequency of the
mains supply.
• Only connect the machine to electrical installation
made by a certifi ed electrician and com ply with IEC
60364-1.
Z
6
• It is recommended that the electrical supply to the
Original Instructions
T
SHU
U
H
machine should include a residual current device that
will interrupt the supply if the leakage current to earth
exceeds 30 mA for 30 ms.
• Inadequate extension cables can be dangerous. If an
extension cable is used, it shall be suitable for outdoor
EN
NO
use, and the connection has to be kept dry and off the
ground.
• Nilfi sk recommends use of an extension cable drum
when cable extension is needed which keeps the
socket at least 60 mm above the ground.
• If the electric cable is damaged, it must be replaced
by an authorized Nilfi sk distributor or similar qualifi ed
person in order to avoid a hazard.
Water connection
• This high pressure washer is only allowed to be connected with the drinking water mains, when an appropriate backfl ow preventer has been installed, Type BA
according to EN 60335-2-79.
• The backfl ow preventer can be ordered under number
106411177.
• As soon as drinking water has fl own through the back-
SV
FI
FR
NL
I
L
R
fl ow preventer, it is no longer regarded as drinking
water.
• Operation by suction (e.g. a rainwater vessel) is carried out without a backfl ow preventer – see “Connec-ting to a pressureless water supply”. The machine
can be connected to water mains with a max. inletpressure of 1 MPa/10 bars and max. 40°C.
Safety devices
Locking device on spray handle:
• The spray handle features a locking device. When the
pawl is activated, the spray handle cannot be operated.
Thermal sensor:
• A thermal sensor protects the motor against overloading. The machine will restart after a few minutes when
the thermal sensor has cooled.
C
L
HR
SL
SK
V
R
Z
7Original Instructions
Loading...
+ 16 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.