En
The D4 Firmware Update
The Custom Settings Menu
❚❚❚❚ Custom Setting f17: Assign Remote Fn Button
Locking Focus with the
B
Button
The D4 Firmware Update
Please note the following changes to the User’s Manual with the release of the latest camera fi rmware
(version A 1.10/B 1.10).
The Custom Settings Menu
The following item has been added to the Custom Settings Menu.
Custom Setting f17: Assign Remote Fn Button
Choose the role played by the Fn buttons on optional WR-1 or WR-T10 wireless remote controllers.
Option Description
Preview Press the button to preview depth of fi eld.
q
FV lock Press the button to lock fl ash value (supported fl ash units only). Press again to cancel FV
r
AE/AF lock Focus and exposure lock while the button is pressed.
B
AE lock only Exposure locks while the button is pressed.
C
AE lock (Reset on
D
release)
AF lock only Focus locks while the button is pressed.
F
AF-ON Pressing the button initiates autofocus.
A
Flash off The fl ash will not fi re in photos taken while the button is pressed.
s
Live view Press the button to start and end live view.
a
None The button has no eff ect.
lock.
Exposure locks when the button is pressed, and remains locked until the button is pressed
a second time, the shutter is released, or the standby timer expires.
A Wireless Remote Controllers
The camera shutter can be released remotely using optional WR-R10, WR-T10, or WR-1 wireless remote controllers
(the WR-R10 requires a WR-A10 adapter; for details, see the manual provided with the controller). If Record movies is
selected for Custom Setting g4 (Assign shutter button), the shutter-release button on the wireless remote controller
can be used to start movie live view and record movies: press it halfway to start movie live view and all the way down
to start or end movie recording.
Locking Focus with the
During viewfi nder photography, focus can be locked using either of the B buttons in place of the
shutter-release button. If AF-ON only is selected for Custom Setting a4 (AF activation), the camera
will not focus when the shutter-release button is pressed halfway; instead, the camera will focus when
an B button is pressed, at which point focus will lock and remain locked until either B button is
pressed again. The in-focus indicator will not be displayed in the viewfi nder. The update changes the
behavior of the B buttons as follows:
• Before the update: The shutter could be released at any time, regardless of the options selected for
Custom Settings a1 (AF-C priority selection) and a2 (AF-S priority selection).
• After the update: When Focus is selected for Custom Setting a2 (AF-S priority selection), the shutter can
no longer be released in single-point AF AF-area mode if the camera fails to focus using single-servo
autofocus.
B
Button
Loading...