Page 1
New Holland
T4000 Series Utility Tractor Specifications
T4020 T4030 T4040 T4050
MODEL T4020 T4030 T4040 T4050
NGINE*
E
Type 4-cycle, diesel 4-cycle, diesel 4-cycle, diesel 4-cycle, diesel
Make New Holland New Holland New Holland New Holland
Model F5C F5C NEF NEF
Cylinders / aspiration ..............................................................4 / Turbocharged air to air intercooled..............................................................
Displacement, cu. in. (L) 195 (3.2) 195 (3.2) 274 (4.5) 274 (4.5)
Block type Parent bore Parent bore Parent bore Parent bore
Rated speed, RPM 2300 2300 2300 2300
Gross engine horsepower 64 76 84 95
PTO horsepower 50 62 70 80
Emission legislation Tier III Tier III Tier III Tier III
FUEL, AIR AND LUBRICATION SYSTEM
Injection pump Bosch / rotary Bosch / rotary Bosch / rotary Bosch / rotary
Fuel filter type ........ Dual stage fuel filtering system with water/sediment separator followed by a paper filter element cartridge........
Fuel tank capacity - standard, gal. (L) Standard – 21.6 (82) Standard – 21.6 (82) Standard – 21.6 (82) Standard – 21.6 (82)
– Deluxe, gal. (L) Deluxe – 19.8 (75) Deluxe – 19.8 (75) Deluxe – 23.2 (88) Deluxe – 23.2 (88)
– SuperSteer™, gal. (L) N/A 19.8 (75) N/A 23.2 (88)
Air filter type Dry / dual element Dry / dual element Dry / dual element Dry / dual element
Oil and filter services*** 600 hours 600 hours 600 hours 600 hours
Muffler Under hood Under hood Under hood Under hood
Exhaust outlet, ROPS Right side of hood Right side of hood Right side of hood Right side of hood
Exhaust outlet, cab Right side A-pillar Right side A-pillar Right side A-pillar Right side A-pillar
ELECTRICAL
Battery, volts 12 12 12 12
Battery, cca 730 730 800 800
Alternator, amps 85 85 120 120
Cold start aid Grid heater Grid heater Grid heater Grid heater
TRANSMISSION
Choice of transmissions
Clutch type / size (mechanical), in. (mm) ............................................. Dry / 11 (280) diameter, heavy-duty cerametallic material.............................................
Clutch type / size (electrohydraulic), in. (mm) ......................................................... Wet / six plates 5.2 (133), organic material ........................................................
Gears: 2 – 8 mph working range** ..............................................................12 x 12 – 7 gears | 16 x 16 – 9 gears ..............................................................
Gears: <1 mph** ..............................................................12 x 12 – 0 gears | 16 x 16 – 3 gears..............................................................
Maximum speed**, mph (kph) ........................................12 x 12 – 18.73 (30.14) | 16 x 16 – 18.73 (30.14) or 23.5 (37.8) ........................................
PTO
Type Fully independent Fully independent Fully independent Fully independent
Base equipment PTO speed, RPM 540 540 540 540
Optional PTO speed, RPM N/A N/A 540/1000 540/1000
Operator control ....................................................................T4000 Standard – mechanical....................................................................
PTO clutch .......................................................... Dry, mechanical, 11-in. dry, organic plate ..........................................................
Engine speed ................................................................ 2196 engine rpm at 540 PTO rpm ................................................................
3-POINT HITCH
Category II / I II / I II / I II / I
Draft sensing ...................................................................Mechanical, lower link sensing ...................................................................
Std. ASAE lift capacity @ 24 in., lbs. (kg) 3962 (1800) 3962 (1800) 3962 (1800) 3962 (1800)
Link arms Flexible Flexible Flexible Flexible
Stabilizers Telescoping Telescoping Telescoping Telescoping
Upper / lower limit setting Lift-O-Matic Lift-O-Matic Lift-O-Matic Lift-O-Matic
.......................16F x 16R Synchro Command transmission with your choice of mechanical shuttle or.......................
clutchless power shuttle (all models)
...................................................T4000 Deluxe / Deluxe Supersteer™ – Servo-assist...................................................
Page 1 of 3
Page 2
New Holland
T4000 Series Utility Tractor Specifications
T4020 T4030 T4040 T4050
MODEL T4020 T4030 T4040 T4050
YDRAULICS
H
System type Open center Open center Open center Open center
System pressure, psi (bar) 2755 (190) 2755 (190) 2755 (190) 2755 (190)
Implement pump flow (base), gpm (L/min.) ...................T4000 Standard – 12.8 (48.6) .................... ....................................16.1 (61)....................................
Implement pump flow (optional), gpm (L/min.) ....................T4000 Standard – 16.1 (61) ..................... N/A N/A
Steering & services pump, gpm (L/min.) ...............with mechanical shuttle – 7.4 (28)................. ....................................9.4 (35.6) ...................................
Remotes - base / optional ........................................................ Standard – 1 / 2, 3 (4 & 5 with loader valve)........................................................
REAR AXLE
Type Flange Flange Flange Flange
Diff lock engagement Mechanical Mechanical Mechanical Mechanical
Track adjustment, in. (mm) 49.6 – 76.1 (1260 – 1932) 49.6 – 76.1 (1260 – 1932) 49.6 – 76.1 (1260 – 1932) 49.6 – 76.1 (1260 – 1932)
Dimension across flange, in. (mm) 61.5 (1562) 61.5 (1562) 61.5 (1562) 61.5 (1562)
Axle capacity, lbs. (kg) 8157 (3700) 8157 (3700) 8157 (3700) 8157 (3700)
FRONT AXLE
2WD
Track adjustment, in. (mm) 53.7 – 79.9 (1365 – 2031) 53.7 – 79.9 (1365 – 2031) 53.7 – 79.9 (1365 – 2031) 53.7 – 79.9 (1365 – 2031)
Axle capacity (restricted), lbs. (kg) 6613 (3000) 6613 (3000) 6613 (3000) 6613 (3000)
Axle capacity, lbs. (kg) 4630 (2100) 4630 (2100) 4630 (2100) 4630 (2100)
Maximum steering angle, degrees 55 55 55 55
Oscillation, degrees 11 11 11 11
FWD
FWD engagement – T4000 Standard Mechanical Mechanical Mechanical Mechanical
FWD engagement – T4000 Deluxe ............................w/mechanical shuttle – mechanical engagement.............................
SuperSteer front axle N/A Auto FWD management N/A Auto FWD management
Track adjustment, in. (mm) .......................................................................60.8 – 76.6 (1545 – 1945).......................................................................
Diff lock engagement ....................................................................T4000 Standard – limited slip ....................................................................
Axle capacity (restricted), lbs. (kg) 7937 (3600) 7937 (3600) 7937 (3600) 7937 (3600)
Axle capacity, lbs. (kg) 5511 (2500) 5511 (2500) 5511 (2500) 5511 (2500)
Maximum steering angle – FWD, degrees 55 55 55 55
Maximum steering angle – SuperSteer, degrees N/A 76 N/A 76
Oscillation, degrees 11 11 11 11
..................... T4000 Deluxe – 16.1 (61).......................
..................with power shuttle – 9.4 (35.6) ...................
...................................................Deluxe / SuperSteer 1 / 2, 3, 4 (5 with loader valve)...................................................
............................w/power shuttle – electrohydraulic engagement ............................. Electrohydraulic
.....................................................T4000 Deluxe – electrohydraulic differential lock .....................................................
DIMENSIONS
Operator’s station ..............................................................T4000 Series Standard – open station..............................................................
Platform type, cab / ROPS ...................................................................ISO mounted, straddle platform...................................................................
Wheelbase (2WD), in. (mm) ........................Standard – 83.3 (2115) ......................... .........................Standard – 86.7 (2202) ........................
Wheelbase (FWD), in. (mm) ........................Standard – 80.2 (2038) ......................... .........................Standard – 83.7 (2125) ........................
Wheelbase (Supersteer), in. (mm) N/A 94.8 (2408) N/A 98.2 (2495)
Overall length - standard, in. (mm) 135.2 (3433) 135.2 (3433) 138.6 (3520) 138.6 (3520)
– Deluxe, in. (mm) 137.5 (3493) 137.5 (3493) 140.9 (3580) 140.9 (3580)
– Supersteer, in. (mm) N/A 137.5 (3493) N/A 140.9 (3580)
ROPS height (folded)**, in. (mm) 77.8 (1976) 77.8 (1976) 77.8 (1976) 77.8 (1976)
Cab height**, in. (mm) 91.4 (2322) 91.4 (2322) 91.4 (2322) 91.4 (2322)
.......................................................................T4000 Series Deluxe – cab.......................................................................
......................................T4000 Series Supersteer - open station / cab (T4030 & T4050 only) .....................................
..........................Deluxe – 85.6 (2175) ........................... ...........................Deluxe – 89.0 (2262) ..........................
..........................Deluxe – 82.6 (2098) ........................... ...........................Deluxe – 86.0 (2185) ..........................
Page 2 of 3
Page 3
New Holland
T4000 Series Utility Tractor Specifications
T4020 T4030 T4040 T4050
MODEL T4020 T4030 T4040 T4050
PPROXIMATE SHIPPING WEIGHT
A
Less Cab (ROPS)
– 2WD, lbs. (kg) 5776 (2620) 5776 (2620) 5953 (2700) N/A
– FWD, lbs. (kg) 6327 (2870) 6327 (2870) 6503 (2950) 6614 (3000)
Cab
– 2WD, lbs. (kg) 6217 (2820) 6217 (2820) 6393 (2900) N/A
– FWD, lbs. (kg) 6768 (3070) 6768 (3070) 6944 (3150) 7055 (3200)
*Manufacturer's estimate, **with 16.9x30 rear tires, *** affected by sulfur content of the fuel
TIRE OPTIONS
R1 “General Farming” – great for a wide variety of agricultural applications.
R3 “All Weather” – great for highway mowing, parks, orchards and light industrial applications.
R4 “Industrial” – great for light industrial applications, rental yards, contractors and municipalities.
Galaxy “Turf Special” – great for golf courses and stadium grounds maintenance.
*Approximate weights for base tractor with full fuel tank; 16.9 x 28R1 rear tires and 9.5L x 15 (2WD) or 12.4R20 (FWD) front tires; mechanical shuttle transmission; without front weights or
rear wheel weights; or rear wheel weights; single rear remote valve
OPTIONAL EQUIPMENT
• Second rear remote valve (lever controlled)
• Third rear remote valve (lever controlled)
• Fourth rear remote valve (lever controlled —
available on T4000 Deluxe and Deluxe SuperSteer
• Mid-mount valve with joystick control
• Back-up alarm wiring kit
• Horn
• Front weight bracket kit
• Rear wheel weights
• 88 lb. front weights
• 540/1000 rpm PTO (T4040/T4050 only)
• Grill guard
• Fixed external mirrors (cab only)
• Telescoping external mirrors (cab only)
• Horizontal exhaust kit
• Blue fiberglass canopy
• White fiberglass canopy
• Steel FOPS canopy
• Front fenders for FWD front axle
• Air ride seat (cab only)
• Seat armrests
• Rotary beacon (cab only)
• Engine block heater
• Offset drawbar for Galaxy turf
• Drawbar clevis
• Low profile 2WD front axle
• Carbon filters
• Full width coverage fenders extension
(Deluxe SuperSteer only)
• Rear window wiper and washer
Visit our Web site at www.newholland.com/na. Or, call toll-free 866-NEW-HLND (866-639-4563).
Design, mat erials and/or spec ifications are su bject to
chan ge w ithout no tice and w ithout l iabili ty th erefo r.
Specificat ions are applicable to units sold in Canada, the
United Stat es, its territo ries and possessio ns, and may
var y ou tside these areas .
© 2008 CNH America LLC
New Holland is a regis tered trad emark of CNH America LLC.
Safety begins with a thorough understanding of
the equipment. Always make sure you and
your operators read the Operator’s Manual
before using the equipment. Pay close
attention to all safety and operating
decals and never operate machinery
without all shields, protective devices
and structures in place.
Page 3 of 3
Loading...