Netgear SXS80 quick start Guide

Package contents

24567

Hardware overview

Prepare the wall mount

Wall-mount the Orbi Pro

Wall-mount cov e r (1)

Orbi Pro WiFi 6

Satellite

(Model SXS80)

Ethernet cable (1)

Power adapter (1) (varies by region)

Wall-mount bracket (1)

Orbi Pro WiFi 6 Satellite

IMPORTANT: You can install the wall

mount only vertically on a wall. Do not install the wall mount horizontally or on the ceiling.

Quick Start

Model SXS80

PRO

Note: The bracket and cover comes

preattached.

Wall anchors (2), one set

Screws (2), one set

Orbi Pro WiFi 6 Satellite

Bar LED

Sync button (also used for WPS connection)

LAN port that supports

1Gigabit and 2.5Gigabit

Ethernet. Use the port for a high-speed LAN connection.

LAN Ethernet ports 1–4. Ports 3 and 4 support link aggregation.

Power LED

Reset button

DC Power connector

Sync your Orbi Pro WiFi 6 satellite

Manually sync your satellite with your router

Orbi Pro WiFi 6 satellite sync information

To sync your Orbi Pro WiFi 6 satellite with your Orbi Pro WiFi 6 router, you can use the

NETGEAR Insight app or you can manually sync your satellite.

Sync your satellite using the NETGEAR Insight app

You can use the NETGEAR Insight app to sync your satellite with your Orbi Pro router.

For more information about the app, visit https://www.netgear.com/insight/.

1. Download the NETGEAR Insight app from the Apple App Store or Google Play Store.

2. Launch the NETGEAR Insight app on your mobile device and follow the prompts.

You can manually sync your satellite using the Sync buttons on your Orbi Pro satellite and router.

1. Place the Orbi Pro satellite in a central location for the best WiFi coverage.

2. Connect the Orbi Pro satellite to a power source. The Power LED on the back of the Orbi Pro satellite lights green.

3. Press the Sync button on the back of your satellite, and within two minutes, press the Sync button on the back of your router.

The Orbi Pro router’s ring LED turns off after the setup is complete.

The Orbi Pro satellite’s bar LED lights white while the satellite attempts to sync with the Orbi Pro router. After the Orbi Pro satellite’s bar LED lights white, it lights one of the following colors for about three minutes and then turns off:

Blue

The connection between the Orbi Pro router and Orbi Pro satellite is good.

Amber

The connection between the Orbi Pro router and Orbi Pro satellite is fair. Consider moving the Orbi Pro satellite closer to the Orbi Pro router.

Magenta

The Orbi Pro satellite was unable to connect to the Orbi Pro router. Move the Orbi Pro satellite closer to the Orbi Pro router.

Note: If the bar LED still lights magenta after about one minute, press

the Sync button on the back of the Orbi Pro router and on the back of the Orbi Pro satellite. When the Orbi Pro satellite syncs with the Orbi Pro router, the satellite’s bar LED lights white then lights blue to indicate a good connection, and then turns off.

Support and Community

Visit netgear.com/support to get your questions answered and access the latest downloads.

You can also check out our NETGEAR Community for helpful advice at

community.netgear.com.

Regulatory and Legal

Si ce produit est vendu au Canada, vous pouvez accéder à ce document en français canadien à https://www.netgear.com/support/download/.

(If this product is sold in Canada, you can access this document in Canadian French at

https://www.netgear.com/support/download/.)

For regulatory compliance information including the EU Declaration of Conformity, visit

https://www.netgear.com/about/regulatory/.

See the regulatory compliance document before connecting the power supply.

For NETGEAR’s Privacy Policy, visit https://www.netgear.com/about/privacy-policy.

By using this device, you are agreeing to NETGEAR’s Terms and Conditions at

https://www.netgear.com/about/terms-and-conditions. If you do not agree, return the

device to your place of purchase within your return period.

NETGEAR, Inc.

350 East Plumeria Drive San Jose, CA 95134, USA

trademarks are used for reference purposes only.

July 2020

NETGEAR INTERNATIONAL LTD Floor 1, Building 3, University Technology Centre Curraheen Road, Cork, T12EF21, Ireland