Netgear GS728TPP, GS728TP Data Sheet [nl]

Data Sheet | GS728TPv2, GS728TPPv2, GS752TPv2, GS752TPP
Gigabit PoE+ Smart Switches
with Remote/Cloud Management
IN UNMANAGED
& SMART SWITCHES
All ports PoE+ with up to 760W
PoE budget and Remote/Cloud Management option - Select your
new network engine!
As a leading provider of network
equipment for SMBs, NETGEAR® understands the importance of providing a great choice of PoE port counts and power budgets that can adapt to your business’ needs, whether in the hospitality, catering, education or retail domains.
The GS728TPv2, GS728TPPv2, GS752TPv2 and GS752TPP Gigabit Ethernet Switches with PoE+ and 4 SFP Ports join the
NETGEAR Standalone Smart Switches
family, adding full 24 and 48 port PoE+
Highlights
The NETGEAR PoE+ Gigabit Smart Switches with Remote/Cloud Management provides a great value, with
allowing SMB customers to deploy PoE­based VoIP phones, IP cameras, video­over-IP endpoints and Wireless access points simply and securely. Advanced
features such as IPv4/IPv6 Layer 3 static routing, LACP link aggregation, DiffServ QoS, Private VLANs, Multicast VLAN
Registration and Spanning Tree will satisfy even the most advanced small
business networks.
support for deployment of modern high­power PoE devices. Cautious spender
organizations can now deploy denser
PoE+ devices connected to a cost­effective switch, with a reasonable PoE
power budget of 190W over 24-port, or 380W over 48-port. Organizations who
buy infrastructure for the long term and
want future proong for the unforeseeable
can now select a switch with a PoE power
budget of 380W over 24-port, or 760W over 48-port providing more headroom.
Key features include:
• Quiet rack mounting operation with 27.08dB to 39.74dB at 25°C (77°F) ambient
• Layer 3 static routing with 32 routes (IPv4 and IPv6) for interVLAN local
routing
• Advanced VLAN and Private VLAN support for better network
segmentation
• L2/L3/L4 access control lists (ACLs) for granular network access control including 802.1x port authentication
Temperature- and load-based fan-speed control combines accurate monitoring
with minimized system acoustic noise: the GS728TPv2 supports quiet rack mounting operation with a maximum of 27.08dB even at full PoE power with trafc on all ports and 25°C (77°F) ambient. Following the same measurements, the GS728TPPv2 is rated at 33.42dB, the GS752TPv2 at
36.94dB and the GS752TPP at 39.74dB.
• Advanced per port PoE controls for
remote power management of PoE connected devices including operation scheduling (e.g. Wireless APs, IP
security cameras, LED lighting, secure access door locks, IoT devices…)
• Advanced QoS (Quality of Service) for trafc prioritization including port-based,
802.1p and L2/L3/L4 DSCP-based
• Auto “denial-of-service” (DoS) prevention
• IGMP Snooping and Querier for multicast optimization
PAGE 1 of 14
Data Sheet | GS728TPv2, GS728TPPv2, GS752TPv2, GS752TPP
Gigabit PoE+ Smart Switches
with Remote/Cloud Management
• Multicast VLAN Registration (MVR) for larger L2 multicast networks and AV
over IP deployment
• Dynamic ARP for increased security
targeting a class of Man in the Middle
attack
• Rate limiting and priority queuing for
better bandwidth allocation
• Port mirroring for network monitoring
• Energy Efcient Ethernet (IEEE 802.3az) for maximum power savings
• Cable test to troubleshoot connection
issues
• SNMP v1, v2c, v3 and RMON remote
monitoring
Build a future-proof network with NETGEAR:
• Solid performance with non-blocking architecture, 16K MAC addresses, 256 VLANs, 100 shared (ingress) ACLs and 512 Multicast groups
• Comprehensive IPv6 supporting management, QoS, ACL and routing,
ensuring investment protection and a smooth migration to IPv6-based
network
• PoE+ support on all models and on all
ports
• 4 Dedicated SFPs, not only providing ber uplinks, but also uplink
redundancy and failover, improving
reliability and availability for the network
Fully-integrated cloud-manageable devices
• Remote/Cloud Management capability
with NETGEAR Insight. Instantly activate NETGEAR Insight Cloud management from the web GUI, for simpler
conguration and deployment from
anywhere using the NETGEAR Insight app on mobile devices or the Insight Cloud Portal through a web browser
Smart IT, not Big IT
Easy-to-use Web browser-based management GUI
• Network Management System (NMS300), allowing all NETGEAR
business products to be deployed and managed through this single interface
• Dual rmware images improve reliability and uptime to your network
NETGEAR Quality and Reliability
• Worry-free NETGEAR ProSAFE Limited Lifetime Warranty*, online technical chat support and Next Business Day (NBD) replacement.
• 90-days Free 24x7 Advanced Technical Phone Support**
PAGE 2 of 14
Data Sheet | GS728TPv2, GS728TPPv2, GS752TPv2, GS752TPP
Gigabit PoE+ Smart Switches
with Remote/Cloud Management
Hardware at a Glance
FRONT REAR SIDE
Model Name
GS728TPv2 Rackmount 24 4 24 PoE+ (190W) 1 internal PSU, xed 2 internal fans, xed
GS728TPPv2 Rackmount 24 4 24 PoE+ (380W) 1 internal PSU, xed 2 internal fans, xed
GS752TPv2 Rackmount 48 4 48 PoE+ (380W) 1 internal PSU, xed 2 internal fans, xed
GS752TPP Rackmount 48 4 48 PoE+ (760W) 1 internal PSU, xed 3 internal fans, xed
Form-Factor
10/100/1000 Base-T RJ45 ports
1000BASE-X Fiber SFP Ports
PoE+ 802.3at Ports (Budget)
Power Supply Fans
Software at a Glance
Management
Web Browser-based GUI
(HTTP/HTTPS),
NETGEAR Insight mobile app or Insight Cloud Portal for local or remote management
PC-Based Smart Control
Center Utility (SCC) RMON, SNMP
IPv4/IPv6
ACL and QoS
L2, L3, L4,
ingress
Performance at a Glance
Model Name
GS728TPv2
GS728TPPv2
GS752TPv2
GS752TPP
Packet
buffer
1.5MB
CPU ACLs
MIPS-34Kc 700MHz
Single Core
128MB DDR
RAM
32MB FLASH
LAYER 2+ / LAYER 3 LITE FEATURES
IPv4/IPv6 Multicast
Filtering
IGMP and MLD
Snooping
100 shared
Auto-VoIP Auto-Video
Yes Yes Static, Dynamic,
MAC Ad­dress Table ARP Table
VLANs
16K MAC
512 ARP 256 VLANs
IEEE (802.3az) Energy Efcient Ethernet
Fabric
56Gbps
line-rate
104Gbps line-rate
Latency (Max Connection Speed)
1G Copper: <3.35μs
1G Fiber: <2.5μs
VLANs Convergence
LLDP-MED,
Voice, MAC, Protocol-based, and Private
VLAN
RADIUS,
802.1X
Static Routes
(IPv4 & IPv6)
IPv4: 32
IPv6: 32
IPv4 & IPv6 Static Routing
Yes
Multicast IGMP Group
512
PAGE 3 of 14
Features and Benets
Hardware Features
Data Sheet | GS728TPv2, GS728TPPv2, GS752TPv2, GS752TPP
Gigabit PoE+ Smart Switches
with Remote/Cloud Management
1000BASE-T Copper Ethernet PoE+ connections
1000BASE-X Fiber SFP ports
Great choice of PoE port counts and PoE power budgets that can adapt to the business’s needs
Low Acoustics
Energy Efcient Ethernet (IEEE 802.3az) Maximum power reduction for onging operational cost savings.
Software Features
Fully-integrated Cloud-manageable Devices
Comprehensive IPv6 Support for Management,
ACL and QoS
IPv4 & IPv6 Static Routing
Robust security features:
• 802.1x authentication (EAP)
• Port-based security by locked MAC
• ACL ltering to permit or deny trafc based on
MAC and IP addresses
Comprehensive QoS features:
• Port-based or 802.1p-based prioritization
• Layer 3-based (DSCP) prioritization
• Port-based ingress and egress rate limiting
Support high-density VoIP, Surveillance and Wi-Fi AP deployments, scal able for future growth. Never face the risk of running out of PoE ports.
Four dedicated Gigabit SFP ports for aggregation to the network core. Support for Fiber and Copper modules. Can also build dual redundancy by a trunked uplink with link aggregation and failover.
190W, 380W or 760W PoE budget available across 24 or 48 Gigabit PoE+ ports (802.3at) – Connect multiple power demanding devices to your network with a single wire for power and connectivity.
Temperature-based fan-speed control minimizes system acoustic noise in any environment starting at 27.08dB at 25°C (77°F) ambient.
Require no additional hardware (cloud keys, network portals, local servers, VPN or proxy appliances etc) to directly connect to the cloud and allow
remote management. No additional hardware or software. Just switch to Insight Cloud Management mode through Web browser-based User Interface and go.
Build current network with future in mind. Ensure investment protection and a smooth migration to an IPv6-based network without switch replacement.
A simple way to provide segmentation of the network with internal routing through the switch – reserving the router for external trafc routing only, making the entire network more efcient.
Build a secured, converged network with all types of trafc by preventing external attacks and blocking malware while allowing secure access for authorized users.
Advanced controls for optimized network performance and better delivery of mission-critical trafc such as voice and video.
-
Auto-VoIP, Auto-Voice VLAN, and Auto-Video VLAN
IGMP (IPv4) and MLD (IPv6) Snooping and Querier modes with Fast Leave
Automatic Voice over IP prioritization (Auto-VoIP) simplies most complex multi-vendor IP telephone deployments either based on protocols (SIP) or on OUI bytes (default database and user-based OUIs) in the phone source
MAC address, providing the best class of service to VoIP streams (both data
and signaling) over other ordinary trafc by classifying trafc, and enabling correct egress queue conguration. Similarly, Auto-Video VLAN enables IGMP snooping to minimize broadcast streams.
Facilitate fast receiver joins and leaves for multicast streams. Save cost and improve network efciency by ensuring multicast trafc only reaches desig nated receivers without the need of an extra multicast router.
PAGE 4 of 14
-
Software Features (continued)
Data Sheet | GS728TPv2, GS728TPPv2, GS752TPv2, GS752TPP
Gigabit PoE+ Smart Switches
with Remote/Cloud Management
Protected Ports
DHCP Snooping and Dynamic ARP Inspection
Dynamic VLAN Assignment (RADIUS)
Dual Firmware Images
Firmware Updates from Cloud
Ensure no exchange of unicast, broadcast, or multicast trafc between
the protected ports on the switch, thereby improving the security of your
converged network. This allows your sensitive phone conversations to
stay private and your surveillance video clips can be forwarded to their
designated storage device without leakage or alteration.
Ensure IP address allocation integrity by only allowing DHCP messages from trusted DHCP servers and dropping malformed DHCP messages with a port or MAC address mismatch. Use the DHCP snooping bindings database per port and per VLAN to drop incoming packets that do not
match any binding and to enforce source IP/MAC addresses for malicious
users trafc elimination.
IP phones and PCs can authenticate on the same port but under different
VLAN assignment policies. Users are free to move around and enjoy the same level of network access regardless of their physical location on the network.
Dual rmware images for transparent rmware updates with minimum
service interruption.
Direct cloud-to-device rmware updates, initiated and/or scheduled using the Insight app, all from the palm of your hand, anytime, anywhere!
PAGE 5 of 14
Loading...
+ 9 hidden pages