Netgear CATRBR50 Data Sheet

Overview

The high-performance NETGEAR original CAT5E cable features
4UTP 32AWG twisted pair wires which help reduce electromagnetic
interference to provide better protection from crosstalk and noise.
The wires are housed in durable PVC outer jacket that prevents
abrasion and corrosion. The CAT5E cable features RJ45 male
connectors on each end, with gold-plated contacts for a clear signal.
Highly recommended to be used with NETGEAR Orbi products.

NETGEAR accessories are made by NETGEAR, and fully
tested under strict SQA environment to meet the highest
product quality standard.

Data Sheet | CATRBR50

Premium CAT5E Flat Ethernet Cable

Technical Specifications

• Cable Type: CAT5E

• Cable Length: 6.56ft (2.0m)

• Connector Type: RJ45

• Outside Diameter: 6.0*1.5±0.2mm

• Cable Performance: Up to 100MHz

• Conduc tor Material: 100 % Bare Copper

• Contact Plating: 3u" Gold Plated

• Conductor Gauge: 32 AWG

• Jacket Material: PVC

• Certified: FCC/UL

NETGE AR and the NETGE AR Logo are trademarks of NE TGEAR, Inc. in the United States and/or other countries. Other brand names mentioned herein are for identication

purposes only and may be trademarks of their respective holder(s). Information is subject to change without notice. © 2018 NETGE AR, Inc. All rights reser ved.
NETGE AR, Inc. 350 E. Plumeria Drive, San Jose, CA 95134-1911 USA, 1-888- NETGEAR (638 -4327), E-mail: [e-mail], www.NETGE AR.com CATRBR50-1

PAGE 1 of 1