Netgear CAT7000P Data Sheet

Overview

The NETGEAR CAT5E Ethernet Patch Cable features 4 STP 24
AWG (American Wire Gauge) stranded copper wires to reduce
electromagnetic interference. Stranded cables are more pliable
than solid cables, so they remain intact and protected even if
twisted or bent when connecting electrical components. Plus,
the wires are housed in a durable PVC outer jacket for abrasion
and corrosion resistance. Recommended to be used with
NETGEAR Nighthawk products.

NETGEAR accessories are made by NETGEAR, and fully
tested under strict SQA environment to meet the highest
product quality standard.

Data Sheet | CAT7000P

Premium CAT5E Ethernet Cable

Technical Specifications

• Cable Type: CAT5E

• Cable Length: 5ft (1.5m)

• Connector Type: RJ45

• Outside Diameter: 6.0±0.2mm

• Cable Performance: Up to 100MHz

• Conductor Material: 100% Bare Copper

• Contact Plating: 3u" Gold Plated

• Conductor Gauge: 24 AWG

• Jacket Material: PVC

• Certified: FCC/UL

NETGE AR and the NETGE AR Logo are trademarks of NETGEAR, Inc. in the United States and/or other countries. Other brand names mentioned herein are for identication

purposes only and may be trademarks of their respective holder(s). Information is subjec t to change without notice. © 2018 NETGEAR, Inc. All rights reserved.
NETGE AR, Inc. 350 E. Plumeria Drive, San Jose, C A 95134-1911 USA, 1-888-NETGE AR (638-4327), E-mail: [e-mail], www.NETGE AR.com CAT7000P-1

PAGE 1 of 1