Netgear ANT24501B Data Sheet
ProSAFE® Wireless LAN Antennas and Cables Data Sheet
ANT24501B-10000S/ANT224D10/ANT2409
ACC-10314-01/ACC-10314-03/ACC-10314-04
Optimize WLAN Range and Power
The NETGEAR® ProSAFE® line of antennas and accessories for 802.11b, 802.11g and 802.11n devices give you multiple
options for maximizing the reach and performance of your wireless infrastructure devices. Every WLAN deployment
is unique. When planning a network that incorporates wireless, varying facility sizes, construction materials, distance
between transmission points and physical obstructions must be accounted for. With both directional and omnidirectional antennas, indoor and outdoor options, low-loss cables, mounting hardware, and other accessories, installers
can customize a wireless solution that meets the requirements of even the most challenging applications.
ANT24501B-10000S
NETGEAR Outdoor Dual Band Omni Antenna Bundle Kit
The ANT24501B antenna bundles provides omni directional access with extended range
for client connectivity in a hotspot deployment scenario. Simply connect the 2.4 and 5
GHz antennas to the WND930 Outdoor Access Point to achieve optimum performance at
wireless 802.11n speed. Each antenna bundle comes with 2 units of 2.4 GHz antennas (5
dBi) and 2 units of 5 GHz antennas (7 dBi). The small form factor the lightweight antennas
allows the installation to be simple and intuitive. The ANT24501B antenna bundle is rated
to operate in outdoor deployment in extreme environmental condition that matches the
specification of the WND930 Outdoor Access Point.
ANT224D10
ProSAFE 10 dBi 2x2 Indoor/Outdoor Directional Antenna
The ANT224D10 2.4 GHz antenna provides extended range connectivity for point-topoint wireless bridges at wireless 802.11n speeds. With a maximum range of 8.5 KM,
the ANT224D10 enables high speed connections for building-to-building deployments.
Additionally, this antenna can be used indoors for floor-to-floor connectivity or to provide a
narrow beam of coverage. Due to the multiple streams of trac in the 802.11n specification,
this antenna requires two antenna cables, which are available in a variety of lengths. It
includes several mounting options and comes with wall/pole mounting hardware. Cables are
sold separately.
ANT2409
ProSAFE 9 dBi Indoor/Outdoor Omni-directional Antenna
The ANT2409 indoor/outdoor 2.4 GHz antenna provides extended point-to-multi-point
coverage for wireless 802.11g devices. Optimal for medium range indoor or outdoor pointto-multi-point applications. Included lightning arrestor (a $90 value) helps prevent damage
due to lightning-induced surges or static electricity in outdoor applications. Typically hung
from crossbars of drop ceilings or on a rooop, the waterproof and UV resistant ANT2409
includes wall and pole mounting materials for installation ease; antenna cable and grounding
cable not included.
Page 1 of 3
ProSAFE® Wireless LAN Antennas and Cables Data Sheet
ANT24501B-10000S/ANT224D10/ANT2409
ACC-10314-01/ACC-10314-03/ACC-10314-04
Product ANT24501B ANT224D10 ANT2409
Description NETGEAR Outdoor Dual Band Omni
Antenna Bundle Kit
Wireless Mode 802.11 a/b/g/n IEEE 802.11n IEEE 802.11g
Typical Application Outdoor for wireless client access Indoor/Outdoor Indoor/Outdoor
Maximum Outdoor Range 1.6 km (1 mile) 8.5 km (5.28 miles)
Frequency Range
Gain
Beam Width
2400 - 2500MHz
4900 - 5850MHz
5dBi (2.4GHz)
7dBi (5GHz)
Horizontal 360°
Vertical 11°
Polarization Linear; Vertical Linear; Vertical Vertical
Operational Temperature
Dimensions
-20º to +60ºC
(-4º to 140ºF)
215 x 22 x 11mm
(8.5 x 0.9 x 0.4in)
Weight .2kg (0.4lb) .7kg (1.54lb) .9kg (2lb)
ProSAFE 10 dBi 2x2 indoor/outdoor
directional antenna -ANT224D10
1
2400 - 2500MHz 2400 - 2485MHz
3
10dBi
Horizontal 33°
Vertical 32°
-30º to 80ºC
(-22º to 176ºF)
240 x 240 x 40mm
(9.45 x 9.45 x 1.57in)
ProSAFE 9 dBi Omni-directional
Antenna - ANT2409
11.5 km (7.2 miles)
9dBi
2
3
Horizontal 360°
Vertical 30°
-30º to 80ºC
(-22º to 176ºF)
625 x 75 x 56mm
(24.6 x 2.95 x 2.2in)
• Antenna - Reverse N female
• Lightening arrestor - Reverse N
female
• Adapter - Reverse SMA
• Indoor/Outdoor9dBi
Omni-directional
• Antenna - ANT2409 (cable
required, sold separately)
• Wall and pole mount brackets
and hanging materials
• One reverse N type to reverse
SMA adapter
• 2 m low-loss antenna cable
(connection for lightening
Connectors N-Plug Male
Package Contents •2 x 2.4GHz omni directional
antennas
•2 x 5GHz omni
directional antennas
•Installation guide
• Antenna - N Jack Male
• Lightening arrestor - N Jack Male
to N Jack Male
• Extended Cable - N Plug Female
• NETGEAR ProSafe Indoor/
Outdoor 10dB 2x2 Directional
Antenna ANT224D10
• 2 lightning arrestors with
30 cm low-loss cables
• 2 reverse N/SMA adapters
• Wall mount and pole mounting
hardware
• Installation Guide and Warranty/
Support card
arrestor)
• Lightening arrestor
• Installation guide and
Warranty/support card
Warranty* 2-year
Ordering Information
(all regions)
1
Range estimation is based on FCC-compliant operation of two (2) 802.11 APs each with two (2) ANT24D18 antennas, 3 m antenna cables, and lightning
arrestors installed. With the antennas positioned 26 m above the ground, data rate should sustain 1 Mbps under ideal line-of-sight conditions.
2
Range estimation is based on FCC-compliant operation of two (2)802.11 APs each with two (2) ANT2409 antennas, 1 m antenna cables, and lightning arrestors
installed. With the antennas positioned 27 m above the ground, data rate should sustain 1 Mbps under ideal line-of-sight conditions.
3
Gain: A ratio of decibels to an isotropic antenna that is commonly used to measure antenna coverage.
ANT24501B-10000S ANT224D10-10000S ANT2409-20000S
Page 2 of 3
Loading...